]> git.ipfire.org Git - people/arne_f/kernel.git/commitdiff
xhci: Prevent U1/U2 link pm states if exit latency is too long
authorMathias Nyman <mathias.nyman@linux.intel.com>
Wed, 5 Dec 2018 12:22:39 +0000 (14:22 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 13 Dec 2018 08:18:52 +0000 (09:18 +0100)
commit 0472bf06c6fd33c1a18aaead4c8f91e5a03d8d7b upstream.

Don't allow USB3 U1 or U2 if the latency to wake up from the U-state
reaches the service interval for a periodic endpoint.

This is according to xhci 1.1 specification section 4.23.5.2 extra note:

"Software shall ensure that a device is prevented from entering a U-state
 where its worst case exit latency approaches the ESIT."

Allowing too long exit latencies for periodic endpoint confuses xHC
internal scheduling, and new devices may fail to enumerate with a
"Not enough bandwidth for new device state" error from the host.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/xhci.c

index 155b36265f7ac258d53f340f993ff4ada87f55d5..930eecd864299f032b103832358d81d439db566b 100644 (file)
@@ -4381,6 +4381,14 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
 {
        unsigned long long timeout_ns;
 
+       /* Prevent U1 if service interval is shorter than U1 exit latency */
+       if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+               if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+                       dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+                       return USB3_LPM_DISABLED;
+               }
+       }
+
        if (xhci->quirks & XHCI_INTEL_HOST)
                timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
        else
@@ -4437,6 +4445,14 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
 {
        unsigned long long timeout_ns;
 
+       /* Prevent U2 if service interval is shorter than U2 exit latency */
+       if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+               if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+                       dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+                       return USB3_LPM_DISABLED;
+               }
+       }
+
        if (xhci->quirks & XHCI_INTEL_HOST)
                timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
        else