rprintf(F,"to an rsync daemon, and require SRC or DEST to start with a module name.\n");
rprintf(F,"\n");
rprintf(F,"Options\n");
- rprintf(F," -v, --verbose increase verbosity\n");
- rprintf(F," --info=FLAGS fine-grained informational verbosity\n");
- rprintf(F," --debug=FLAGS fine-grained debug verbosity\n");
- rprintf(F," --msgs2stderr output messages directly to stderr\n");
- rprintf(F," -q, --quiet suppress non-error messages\n");
- rprintf(F," --no-motd suppress daemon-mode MOTD (see manpage caveat)\n");
- rprintf(F," -c, --checksum skip based on checksum, not mod-time & size\n");
- rprintf(F," -a, --archive archive mode; equals -rlptgoD (no -H,-A,-X)\n");
- rprintf(F," --no-OPTION turn off an implied OPTION (e.g. --no-D)\n");
- rprintf(F," -r, --recursive recurse into directories\n");
- rprintf(F," -R, --relative use relative path names\n");
- rprintf(F," --no-implied-dirs don't send implied dirs with --relative\n");
- rprintf(F," -b, --backup make backups (see --suffix & --backup-dir)\n");
- rprintf(F," --backup-dir=DIR make backups into hierarchy based in DIR\n");
- rprintf(F," --suffix=SUFFIX set backup suffix (default %s w/o --backup-dir)\n",BACKUP_SUFFIX);
- rprintf(F," -u, --update skip files that are newer on the receiver\n");
- rprintf(F," --inplace update destination files in-place (SEE MAN PAGE)\n");
- rprintf(F," --append append data onto shorter files\n");
- rprintf(F," --append-verify like --append, but with old data in file checksum\n");
- rprintf(F," -d, --dirs transfer directories without recursing\n");
- rprintf(F," -l, --links copy symlinks as symlinks\n");
- rprintf(F," -L, --copy-links transform symlink into referent file/dir\n");
- rprintf(F," --copy-unsafe-links only \"unsafe\" symlinks are transformed\n");
- rprintf(F," --safe-links ignore symlinks that point outside the source tree\n");
- rprintf(F," --munge-links munge symlinks to make them safer (but unusable)\n");
- rprintf(F," -k, --copy-dirlinks transform symlink to a dir into referent dir\n");
- rprintf(F," -K, --keep-dirlinks treat symlinked dir on receiver as dir\n");
- rprintf(F," -H, --hard-links preserve hard links\n");
- rprintf(F," -p, --perms preserve permissions\n");
- rprintf(F," -E, --executability preserve the file's executability\n");
- rprintf(F," --chmod=CHMOD affect file and/or directory permissions\n");
-#ifdef SUPPORT_ACLS
- rprintf(F," -A, --acls preserve ACLs (implies --perms)\n");
-#endif
-#ifdef SUPPORT_XATTRS
- rprintf(F," -X, --xattrs preserve extended attributes\n");
-#endif
- rprintf(F," -o, --owner preserve owner (super-user only)\n");
- rprintf(F," -g, --group preserve group\n");
- rprintf(F," --devices preserve device files (super-user only)\n");
- rprintf(F," --specials preserve special files\n");
- rprintf(F," -D same as --devices --specials\n");
- rprintf(F," -t, --times preserve modification times\n");
- rprintf(F," -U, --atimes preserve access (last-used) times\n");
- rprintf(F," --open-noatime avoid changing the atime on opened files\n");
- rprintf(F," -O, --omit-dir-times omit directories from --times\n");
- rprintf(F," -J, --omit-link-times omit symlinks from --times\n");
- rprintf(F," --super receiver attempts super-user activities\n");
-#ifdef SUPPORT_XATTRS
- rprintf(F," --fake-super store/recover privileged attrs using xattrs\n");
-#endif
- rprintf(F," -S, --sparse turn sequences of nulls into sparse blocks\n");
-#ifdef SUPPORT_PREALLOCATION
- rprintf(F," --preallocate allocate dest files before writing them\n");
-#else
- rprintf(F," --preallocate pre-allocate dest files on remote receiver\n");
-#endif
- rprintf(F," --write-devices write to devices as files (implies --inplace)\n");
- rprintf(F," -n, --dry-run perform a trial run with no changes made\n");
- rprintf(F," -W, --whole-file copy files whole (without delta-xfer algorithm)\n");
- rprintf(F," --checksum-choice=STR choose the checksum algorithms\n");
- rprintf(F," -x, --one-file-system don't cross filesystem boundaries\n");
- rprintf(F," -B, --block-size=SIZE force a fixed checksum block-size\n");
- rprintf(F," -e, --rsh=COMMAND specify the remote shell to use\n");
- rprintf(F," --rsync-path=PROGRAM specify the rsync to run on the remote machine\n");
- rprintf(F," --existing skip creating new files on receiver\n");
- rprintf(F," --ignore-existing skip updating files that already exist on receiver\n");
- rprintf(F," --remove-source-files sender removes synchronized files (non-dirs)\n");
- rprintf(F," --del an alias for --delete-during\n");
- rprintf(F," --delete delete extraneous files from destination dirs\n");
- rprintf(F," --delete-before receiver deletes before transfer, not during\n");
- rprintf(F," --delete-during receiver deletes during the transfer\n");
- rprintf(F," --delete-delay find deletions during, delete after\n");
- rprintf(F," --delete-after receiver deletes after transfer, not during\n");
- rprintf(F," --delete-excluded also delete excluded files from destination dirs\n");
- rprintf(F," --ignore-missing-args ignore missing source args without error\n");
- rprintf(F," --delete-missing-args delete missing source args from destination\n");
- rprintf(F," --ignore-errors delete even if there are I/O errors\n");
- rprintf(F," --force force deletion of directories even if not empty\n");
- rprintf(F," --max-delete=NUM don't delete more than NUM files\n");
- rprintf(F," --max-size=SIZE don't transfer any file larger than SIZE\n");
- rprintf(F," --min-size=SIZE don't transfer any file smaller than SIZE\n");
- rprintf(F," --partial keep partially transferred files\n");
- rprintf(F," --partial-dir=DIR put a partially transferred file into DIR\n");
- rprintf(F," --delay-updates put all updated files into place at transfer's end\n");
- rprintf(F," -m, --prune-empty-dirs prune empty directory chains from the file-list\n");
- rprintf(F," --numeric-ids don't map uid/gid values by user/group name\n");
- rprintf(F," --usermap=STRING custom username mapping\n");
- rprintf(F," --groupmap=STRING custom groupname mapping\n");
- rprintf(F," --chown=USER:GROUP simple username/groupname mapping\n");
- rprintf(F," --timeout=SECONDS set I/O timeout in seconds\n");
- rprintf(F," --contimeout=SECONDS set daemon connection timeout in seconds\n");
- rprintf(F," -I, --ignore-times don't skip files that match in size and mod-time\n");
- rprintf(F," -M, --remote-option=OPTION send OPTION to the remote side only\n");
- rprintf(F," --size-only skip files that match in size\n");
- rprintf(F," -@, --modify-window=NUM set the accuracy for mod-time comparisons\n");
- rprintf(F," -T, --temp-dir=DIR create temporary files in directory DIR\n");
- rprintf(F," -y, --fuzzy find similar file for basis if no dest file\n");
- rprintf(F," --compare-dest=DIR also compare destination files relative to DIR\n");
- rprintf(F," --copy-dest=DIR ... and include copies of unchanged files\n");
- rprintf(F," --link-dest=DIR hardlink to files in DIR when unchanged\n");
- rprintf(F," -z, --compress compress file data during the transfer\n");
- rprintf(F," --compress-level=NUM explicitly set compression level\n");
- rprintf(F," --skip-compress=LIST skip compressing files with a suffix in LIST\n");
- rprintf(F," -C, --cvs-exclude auto-ignore files the same way CVS does\n");
- rprintf(F," -f, --filter=RULE add a file-filtering RULE\n");
- rprintf(F," -F same as --filter='dir-merge /.rsync-filter'\n");
- rprintf(F," repeated: --filter='- .rsync-filter'\n");
- rprintf(F," --exclude=PATTERN exclude files matching PATTERN\n");
- rprintf(F," --exclude-from=FILE read exclude patterns from FILE\n");
- rprintf(F," --include=PATTERN don't exclude files matching PATTERN\n");
- rprintf(F," --include-from=FILE read include patterns from FILE\n");
- rprintf(F," --files-from=FILE read list of source-file names from FILE\n");
- rprintf(F," -0, --from0 all *-from/filter files are delimited by 0s\n");
- rprintf(F," -s, --protect-args no space-splitting; only wildcard special-chars\n");
- rprintf(F," --copy-as=USER[:GROUP] specify user & optional group for the copy\n");
- rprintf(F," --address=ADDRESS bind address for outgoing socket to daemon\n");
- rprintf(F," --port=PORT specify double-colon alternate port number\n");
- rprintf(F," --sockopts=OPTIONS specify custom TCP options\n");
- rprintf(F," --blocking-io use blocking I/O for the remote shell\n");
- rprintf(F," --stats give some file-transfer stats\n");
- rprintf(F," -8, --8-bit-output leave high-bit chars unescaped in output\n");
- rprintf(F," -h, --human-readable output numbers in a human-readable format\n");
- rprintf(F," --progress show progress during transfer\n");
- rprintf(F," -P same as --partial --progress\n");
- rprintf(F," -i, --itemize-changes output a change-summary for all updates\n");
- rprintf(F," --out-format=FORMAT output updates using the specified FORMAT\n");
- rprintf(F," --log-file=FILE log what we're doing to the specified FILE\n");
- rprintf(F," --log-file-format=FMT log updates using the specified FMT\n");
- rprintf(F," --password-file=FILE read daemon-access password from FILE\n");
- rprintf(F," --list-only list the files instead of copying them\n");
- rprintf(F," --bwlimit=RATE limit socket I/O bandwidth\n");
-#ifdef HAVE_SETVBUF
- rprintf(F," --outbuf=N|L|B set output buffering to None, Line, or Block\n");
-#endif
- rprintf(F," --write-batch=FILE write a batched update to FILE\n");
- rprintf(F," --only-write-batch=FILE like --write-batch but w/o updating destination\n");
- rprintf(F," --read-batch=FILE read a batched update from FILE\n");
- rprintf(F," --protocol=NUM force an older protocol version to be used\n");
-#ifdef ICONV_OPTION
- rprintf(F," --iconv=CONVERT_SPEC request charset conversion of filenames\n");
-#endif
- rprintf(F," --checksum-seed=NUM set block/file checksum seed (advanced)\n");
- rprintf(F," -4, --ipv4 prefer IPv4\n");
- rprintf(F," -6, --ipv6 prefer IPv6\n");
- rprintf(F," -V, --version print the version & other info and exit\n");
- rprintf(F,"(-h) --help show this help (-h is --help only if used alone)\n");
-
+#include "help-rsync.h"
rprintf(F,"\n");
rprintf(F,"Use \"rsync --daemon --help\" to see the daemon-mode command-line options.\n");
rprintf(F,"Please see the rsync(1) and rsyncd.conf(5) man pages for full documentation.\n");
rprintf(F,"\n");
rprintf(F,"Usage: rsync --daemon [OPTION]...\n");
- rprintf(F," --address=ADDRESS bind to the specified address\n");
- rprintf(F," --bwlimit=RATE limit socket I/O bandwidth\n");
- rprintf(F," --config=FILE specify alternate rsyncd.conf file\n");
- rprintf(F," -M, --dparam=OVERRIDE override global daemon config parameter\n");
- rprintf(F," --no-detach do not detach from the parent\n");
- rprintf(F," --port=PORT listen on alternate port number\n");
- rprintf(F," --log-file=FILE override the \"log file\" setting\n");
- rprintf(F," --log-file-format=FMT override the \"log format\" setting\n");
- rprintf(F," --sockopts=OPTIONS specify custom TCP options\n");
- rprintf(F," -v, --verbose increase verbosity\n");
- rprintf(F," -4, --ipv4 prefer IPv4\n");
- rprintf(F," -6, --ipv6 prefer IPv6\n");
- rprintf(F," --help show this help screen\n");
-
+#include "help-rsyncd.h"
rprintf(F,"\n");
rprintf(F,"If you were not trying to invoke rsync as a daemon, avoid using any of the\n");
rprintf(F,"daemon-specific rsync options. See also the rsyncd.conf(5) man page.\n");
Here is a short summary of the options available in rsync. Please refer to the
detailed description below for a complete description.
+[comment]: # (Keep these short enough that they'll be under 80 chars when indented by 8 chars.)
+
```
---verbose, -v increase verbosity
---info=FLAGS fine-grained informational verbosity
---debug=FLAGS fine-grained debug verbosity
---msgs2stderr output messages directly to stderr
---quiet, -q suppress non-error messages
---no-motd suppress daemon-mode MOTD (see caveat)
---checksum, -c skip based on checksum, not mod-time & size
---archive, -a archive mode; equals -rlptgoD (no -H,-A,-X)
---no-OPTION turn off an implied OPTION (e.g. --no-D)
---recursive, -r recurse into directories
---relative, -R use relative path names
---no-implied-dirs don't send implied dirs with --relative
---backup, -b make backups (see --suffix & --backup-dir)
---backup-dir=DIR make backups into hierarchy based in DIR
---suffix=SUFFIX backup suffix (default ~ w/o --backup-dir)
---update, -u skip files that are newer on the receiver
---inplace update destination files in-place
---append append data onto shorter files
---append-verify --append w/old data in file checksum
---dirs, -d transfer directories without recursing
---links, -l copy symlinks as symlinks
---copy-links, -L transform symlink into referent file/dir
---copy-unsafe-links only "unsafe" symlinks are transformed
---safe-links ignore symlinks that point outside the tree
---munge-links munge symlinks to make them safer
---copy-dirlinks, -k transform symlink to dir into referent dir
---keep-dirlinks, -K treat symlinked dir on receiver as dir
---hard-links, -H preserve hard links
---perms, -p preserve permissions
---executability, -E preserve executability
---chmod=CHMOD affect file and/or directory permissions
---acls, -A preserve ACLs (implies -p)
---xattrs, -X preserve extended attributes
---owner, -o preserve owner (super-user only)
---group, -g preserve group
---devices preserve device files (super-user only)
---specials preserve special files
--D same as --devices --specials
---times, -t preserve modification times
---atimes, -U preserve access (use) times
---open-noatime avoid changing the atime on opened files
---omit-dir-times, -O omit directories from --times
---omit-link-times, -J omit symlinks from --times
---super receiver attempts super-user activities
---fake-super store/recover privileged attrs using xattrs
---sparse, -S turn sequences of nulls into sparse blocks
---preallocate allocate dest files before writing
---write-devices write to devices as files (implies --inplace)
---dry-run, -n perform a trial run with no changes made
---whole-file, -W copy files whole (w/o delta-xfer algorithm)
---checksum-choice=STR choose the checksum algorithms
---one-file-system, -x don't cross filesystem boundaries
---block-size=SIZE, -B force a fixed checksum block-size
---rsh=COMMAND, -e specify the remote shell to use
---rsync-path=PROGRAM specify the rsync to run on remote machine
---existing skip creating new files on receiver
---ignore-existing skip updating files that exist on receiver
---remove-source-files sender removes synchronized files (non-dir)
---del an alias for --delete-during
---delete delete extraneous files from dest dirs
---delete-before receiver deletes before xfer, not during
---delete-during receiver deletes during the transfer
---delete-delay find deletions during, delete after
---delete-after receiver deletes after transfer, not during
---delete-excluded also delete excluded files from dest dirs
---ignore-missing-args ignore missing source args without error
---delete-missing-args delete missing source args from destination
---ignore-errors delete even if there are I/O errors
---force force deletion of dirs even if not empty
---max-delete=NUM don't delete more than NUM files
---max-size=SIZE don't transfer any file larger than SIZE
---min-size=SIZE don't transfer any file smaller than SIZE
---partial keep partially transferred files
---partial-dir=DIR put a partially transferred file into DIR
---delay-updates put all updated files into place at end
---prune-empty-dirs, -m prune empty directory chains from file-list
---numeric-ids don't map uid/gid values by user/group name
---usermap=STRING custom username mapping
---groupmap=STRING custom groupname mapping
---chown=USER:GROUP simple username/groupname mapping
---timeout=SECONDS set I/O timeout in seconds
---contimeout=SECONDS set daemon connection timeout in seconds
---ignore-times, -I don't skip files that match size and time
---size-only skip files that match in size
---modify-window=NUM, -@ set the accuracy for mod-time comparisons
---temp-dir=DIR, -T create temporary files in directory DIR
---fuzzy, -y find similar file for basis if no dest file
---compare-dest=DIR also compare received files relative to DIR
---copy-dest=DIR ... and include copies of unchanged files
---link-dest=DIR hardlink to files in DIR when unchanged
---compress, -z compress file data during the transfer
---compress-level=NUM explicitly set compression level
---skip-compress=LIST skip compressing files with suffix in LIST
---cvs-exclude, -C auto-ignore files in the same way CVS does
---filter=RULE, -f add a file-filtering RULE
--F same as --filter='dir-merge /.rsync-filter'
- repeated: --filter='- .rsync-filter'
---exclude=PATTERN exclude files matching PATTERN
---exclude-from=FILE read exclude patterns from FILE
---include=PATTERN don't exclude files matching PATTERN
---include-from=FILE read include patterns from FILE
---files-from=FILE read list of source-file names from FILE
---from0, -0 all *from/filter files are delimited by 0s
---protect-args, -s no space-splitting; wildcard chars only
---copy-as=USER[:GROUP] specify user & optional group for the copy
---address=ADDRESS bind address for outgoing socket to daemon
---port=PORT specify double-colon alternate port number
---sockopts=OPTIONS specify custom TCP options
---blocking-io use blocking I/O for the remote shell
---outbuf=N|L|B set out buffering to None, Line, or Block
---stats give some file-transfer stats
---8-bit-output, -8 leave high-bit chars unescaped in output
---human-readable, -h output numbers in a human-readable format
---progress show progress during transfer
--P same as --partial --progress
---itemize-changes, -i output a change-summary for all updates
---remote-option=OPTION, -M send OPTION to the remote side only
---out-format=FORMAT output updates using the specified FORMAT
---log-file=FILE log what we're doing to the specified FILE
---log-file-format=FMT log updates using the specified FMT
---password-file=FILE read daemon-access password from FILE
---list-only list the files instead of copying them
---bwlimit=RATE limit socket I/O bandwidth
---write-batch=FILE write a batched update to FILE
---only-write-batch=FILE like --write-batch but w/o updating dest
---read-batch=FILE read a batched update from FILE
---protocol=NUM force an older protocol version to be used
---iconv=CONVERT_SPEC request charset conversion of filenames
---checksum-seed=NUM set block/file checksum seed (advanced)
---ipv4, -4 prefer IPv4
---ipv6, -6 prefer IPv6
---version, -V print the version + other info and exit
---help, -h (*) show this help (*see below for -h comment)
+--verbose, -v increase verbosity
+--info=FLAGS fine-grained informational verbosity
+--debug=FLAGS fine-grained debug verbosity
+--msgs2stderr output messages directly to stderr
+--quiet, -q suppress non-error messages
+--no-motd suppress daemon-mode MOTD
+--checksum, -c skip based on checksum, not mod-time & size
+--archive, -a archive mode; equals -rlptgoD (no -H,-A,-X)
+--no-OPTION turn off an implied OPTION (e.g. --no-D)
+--recursive, -r recurse into directories
+--relative, -R use relative path names
+--no-implied-dirs don't send implied dirs with --relative
+--backup, -b make backups (see --suffix & --backup-dir)
+--backup-dir=DIR make backups into hierarchy based in DIR
+--suffix=SUFFIX backup suffix (default ~ w/o --backup-dir)
+--update, -u skip files that are newer on the receiver
+--inplace update destination files in-place
+--append append data onto shorter files
+--append-verify --append w/old data in file checksum
+--dirs, -d transfer directories without recursing
+--links, -l copy symlinks as symlinks
+--copy-links, -L transform symlink into referent file/dir
+--copy-unsafe-links only "unsafe" symlinks are transformed
+--safe-links ignore symlinks that point outside the tree
+--munge-links munge symlinks to make them safe & unusable
+--copy-dirlinks, -k transform symlink to dir into referent dir
+--keep-dirlinks, -K treat symlinked dir on receiver as dir
+--hard-links, -H preserve hard links
+--perms, -p preserve permissions
+--executability, -E preserve executability
+--chmod=CHMOD affect file and/or directory permissions
+--acls, -A preserve ACLs (implies --perms)
+--xattrs, -X preserve extended attributes
+--owner, -o preserve owner (super-user only)
+--group, -g preserve group
+--devices preserve device files (super-user only)
+--specials preserve special files
+-D same as --devices --specials
+--times, -t preserve modification times
+--atimes, -U preserve access (use) times
+--open-noatime avoid changing the atime on opened files
+--omit-dir-times, -O omit directories from --times
+--omit-link-times, -J omit symlinks from --times
+--super receiver attempts super-user activities
+--fake-super store/recover privileged attrs using xattrs
+--sparse, -S turn sequences of nulls into sparse blocks
+--preallocate allocate dest files before writing them
+--write-devices write to devices as files (implies --inplace)
+--dry-run, -n perform a trial run with no changes made
+--whole-file, -W copy files whole (w/o delta-xfer algorithm)
+--checksum-choice=STR choose the checksum algorithms
+--one-file-system, -x don't cross filesystem boundaries
+--block-size=SIZE, -B force a fixed checksum block-size
+--rsh=COMMAND, -e specify the remote shell to use
+--rsync-path=PROGRAM specify the rsync to run on remote machine
+--existing skip creating new files on receiver
+--ignore-existing skip updating files that exist on receiver
+--remove-source-files sender removes synchronized files (non-dir)
+--del an alias for --delete-during
+--delete delete extraneous files from dest dirs
+--delete-before receiver deletes before xfer, not during
+--delete-during receiver deletes during the transfer
+--delete-delay find deletions during, delete after
+--delete-after receiver deletes after transfer, not during
+--delete-excluded also delete excluded files from dest dirs
+--ignore-missing-args ignore missing source args without error
+--delete-missing-args delete missing source args from destination
+--ignore-errors delete even if there are I/O errors
+--force force deletion of dirs even if not empty
+--max-delete=NUM don't delete more than NUM files
+--max-size=SIZE don't transfer any file larger than SIZE
+--min-size=SIZE don't transfer any file smaller than SIZE
+--partial keep partially transferred files
+--partial-dir=DIR put a partially transferred file into DIR
+--delay-updates put all updated files into place at end
+--prune-empty-dirs, -m prune empty directory chains from file-list
+--numeric-ids don't map uid/gid values by user/group name
+--usermap=STRING custom username mapping
+--groupmap=STRING custom groupname mapping
+--chown=USER:GROUP simple username/groupname mapping
+--timeout=SECONDS set I/O timeout in seconds
+--contimeout=SECONDS set daemon connection timeout in seconds
+--ignore-times, -I don't skip files that match size and time
+--size-only skip files that match in size
+--modify-window=NUM, -@ set the accuracy for mod-time comparisons
+--temp-dir=DIR, -T create temporary files in directory DIR
+--fuzzy, -y find similar file for basis if no dest file
+--compare-dest=DIR also compare destination files relative to DIR
+--copy-dest=DIR ... and include copies of unchanged files
+--link-dest=DIR hardlink to files in DIR when unchanged
+--compress, -z compress file data during the transfer
+--compress-level=NUM explicitly set compression level
+--skip-compress=LIST skip compressing files with suffix in LIST
+--cvs-exclude, -C auto-ignore files in the same way CVS does
+--filter=RULE, -f add a file-filtering RULE
+-F same as --filter='dir-merge /.rsync-filter'
+ repeated: --filter='- .rsync-filter'
+--exclude=PATTERN exclude files matching PATTERN
+--exclude-from=FILE read exclude patterns from FILE
+--include=PATTERN don't exclude files matching PATTERN
+--include-from=FILE read include patterns from FILE
+--files-from=FILE read list of source-file names from FILE
+--from0, -0 all *-from/filter files are delimited by 0s
+--protect-args, -s no space-splitting; wildcard chars only
+--copy-as=USER[:GROUP] specify user & optional group for the copy
+--address=ADDRESS bind address for outgoing socket to daemon
+--port=PORT specify double-colon alternate port number
+--sockopts=OPTIONS specify custom TCP options
+--blocking-io use blocking I/O for the remote shell
+--outbuf=N|L|B set out buffering to None, Line, or Block
+--stats give some file-transfer stats
+--8-bit-output, -8 leave high-bit chars unescaped in output
+--human-readable, -h output numbers in a human-readable format
+--progress show progress during transfer
+-P same as --partial --progress
+--itemize-changes, -i output a change-summary for all updates
+--remote-option=OPT, -M send OPTION to the remote side only
+--out-format=FORMAT output updates using the specified FORMAT
+--log-file=FILE log what we're doing to the specified FILE
+--log-file-format=FMT log updates using the specified FMT
+--password-file=FILE read daemon-access password from FILE
+--list-only list the files instead of copying them
+--bwlimit=RATE limit socket I/O bandwidth
+--write-batch=FILE write a batched update to FILE
+--only-write-batch=FILE like --write-batch but w/o updating dest
+--read-batch=FILE read a batched update from FILE
+--protocol=NUM force an older protocol version to be used
+--iconv=CONVERT_SPEC request charset conversion of filenames
+--checksum-seed=NUM set block/file checksum seed (advanced)
+--ipv4, -4 prefer IPv4
+--ipv6, -6 prefer IPv6
+--version, -V print the version + other info and exit
+--help, -h (*) show this help (* -h is help only on its own)
```
Rsync can also be run as a daemon, in which case the following options are
accepted:
```
---daemon run as an rsync daemon
---address=ADDRESS bind to the specified address
---bwlimit=RATE limit socket I/O bandwidth
---config=FILE specify alternate rsyncd.conf file
---dparam=OVERRIDE, -M override global daemon config parameter
---no-detach do not detach from the parent
---port=PORT listen on alternate port number
---log-file=FILE override the "log file" setting
---log-file-format=FMT override the "log format" setting
---sockopts=OPTIONS specify custom TCP options
---verbose, -v increase verbosity
---ipv4, -4 prefer IPv4
---ipv6, -6 prefer IPv6
---help, -h show this help (if used after --daemon)
+--daemon run as an rsync daemon
+--address=ADDRESS bind to the specified address
+--bwlimit=RATE limit socket I/O bandwidth
+--config=FILE specify alternate rsyncd.conf file
+--dparam=OVERRIDE, -M override global daemon config parameter
+--no-detach do not detach from the parent
+--port=PORT listen on alternate port number
+--log-file=FILE override the "log file" setting
+--log-file-format=FMT override the "log format" setting
+--sockopts=OPTIONS specify custom TCP options
+--verbose, -v increase verbosity
+--ipv4, -4 prefer IPv4
+--ipv6, -6 prefer IPv6
+--help, -h show this help (when used with --daemon)
```
# OPTIONS
projects / thirdparty / rsync.git / commitdiff
