ARM: zynq: Deprecate xilinx boot commands

Start to deprecate Xilinx commands which should be replaced by more
generic distribution commands. All current Xilinx bootcommands will be
in tree till end of 2019 and then they will be removed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b57bd1553e9088e9a59dbb344100e411aa643c1d..24f8baf977fb46ccbcee90d57bfce192fc133f3b 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -201,13 +201,15 @@
                "mmcinfo && " \
                "load mmc 0 ${loadbit_addr} ${bitstream_image} && " \
                "fpga load 0 ${loadbit_addr} ${filesize}\0" \
-       "norboot=echo Copying Linux from NOR flash to RAM... && " \
+       "norboot=run xilinxcmd && " \
+               "echo Copying Linux from NOR flash to RAM... && " \
                "cp.b 0xE2100000 ${kernel_load_address} ${kernel_size} && " \
                "cp.b 0xE2600000 ${devicetree_load_address} ${devicetree_size} && " \
                "echo Copying ramdisk... && " \
                "cp.b 0xE2620000 ${ramdisk_load_address} ${ramdisk_size} && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "qspiboot=echo Copying Linux from QSPI flash to RAM... && " \
+       "qspiboot=run xilinxcmd && " \
+               " echo Copying Linux from QSPI flash to RAM... && " \
                "sf probe 0 0 0 && " \
                "sf read ${kernel_load_address} 0x100000 ${kernel_size} && " \
                "sf read ${devicetree_load_address} 0x600000 ${devicetree_size} && " \
@@ -223,7 +225,7 @@
                        "echo Running uenvcmd ...; " \
                        "run uenvcmd; " \
                "fi\0" \
-       "sdboot=if mmcinfo; then " \
+       "sdboot=run xilinxcmd && if mmcinfo; then " \
                        "run uenvboot; " \
                        "echo Copying Linux from SD to RAM... && " \
                        "load mmc 0 ${kernel_load_address} ${kernel_image} && " \
@@ -231,7 +233,7 @@
                        "load mmc 0 ${ramdisk_load_address} ${ramdisk_image} && " \
                        "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}; " \
                "fi\0" \
-       "usbboot=if usb start; then " \
+       "usbboot=run xilinxcmd && if usb start; then " \
                        "run uenvboot; " \
                        "echo Copying Linux from USB to RAM... && " \
                        "load usb 0 ${kernel_load_address} ${kernel_image} && " \
@@ -239,39 +241,46 @@
                        "load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \
                        "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}; " \
                "fi\0" \
-       "nandboot=echo Copying Linux from NAND flash to RAM... && " \
+       "nandboot=run xilinxcmd && " \
+               "echo Copying Linux from NAND flash to RAM... && " \
                "nand read ${kernel_load_address} 0x100000 ${kernel_size} && " \
                "nand read ${devicetree_load_address} 0x600000 ${devicetree_size} && " \
                "echo Copying ramdisk... && " \
                "nand read ${ramdisk_load_address} 0x620000 ${ramdisk_size} && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "jtagboot=echo TFTPing Linux to RAM... && " \
+       "jtagboot=run xilinxcmd && echo TFTPing Linux to RAM... && " \
                "tftpboot ${kernel_load_address} ${kernel_image} && " \
                "tftpboot ${devicetree_load_address} ${devicetree_image} && " \
                "tftpboot ${ramdisk_load_address} ${ramdisk_image} && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "rsa_norboot=echo Copying Image from NOR flash to RAM... && " \
+       "rsa_norboot=run xilinxcmd && " \
+               "echo Copying Image from NOR flash to RAM... && " \
                "cp.b 0xE2100000 0x100000 ${boot_size} && " \
                "zynqrsa 0x100000 && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "rsa_nandboot=echo Copying Image from NAND flash to RAM... && " \
+       "rsa_nandboot=run xilinxcmd && " \
+               "echo Copying Image from NAND flash to RAM... && " \
                "nand read 0x100000 0x0 ${boot_size} && " \
                "zynqrsa 0x100000 && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "rsa_qspiboot=echo Copying Image from QSPI flash to RAM... && " \
+       "rsa_qspiboot=run xilinxcmd && " \
+               "echo Copying Image from QSPI flash to RAM... && " \
                "sf probe 0 0 0 && " \
                "sf read 0x100000 0x0 ${boot_size} && " \
                "zynqrsa 0x100000 && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "rsa_sdboot=echo Copying Image from SD to RAM... && " \
+       "rsa_sdboot=run xilinxcmd && echo Copying Image from SD to RAM... && " \
                "load mmc 0 0x100000 ${boot_image} && " \
                "zynqrsa 0x100000 && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
-       "rsa_jtagboot=echo TFTPing Image to RAM... && " \
+       "rsa_jtagboot=run xilinxcmd && echo TFTPing Image to RAM... && " \
                "tftpboot 0x100000 ${boot_image} && " \
                "zynqrsa 0x100000 && " \
                "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}\0" \
                DFU_ALT_INFO \
+       "xilinxcmd=echo !!! && " \
+               "echo !!! Booting cmd is deprecated (will be removed in 2020). && " \
+               "echo !!! Please move to distro boocmd. && echo !!!\0" \
                BOOTENV
 #endif