-# From configure.in Revision: 1.279
+# From configure.in Revision: 1.280
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:1039: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
fi
if test -n "$BASIC_AUTH_HELPERS"; then
+ for helper in $BASIC_AUTH_HELPERS; do
+ if test -f $srcdir/helpers/basic_auth/$helper/Makefile.in; then
+ :
+ else
+ echo "ERROR: Basic auth helper $helper does not exists"
+ exit 1
+ fi
+ done
echo "Basic auth helpers built: $BASIC_AUTH_HELPERS"
fi
fi
if test -n "$NTLM_AUTH_HELPERS"; then
+ for helper in $NTLM_AUTH_HELPERS; do
+ if test -f $srcdir/helpers/ntlm_auth/$helper/Makefile.in; then
+ :
+ else
+ echo "ERROR: NTLM auth helper $helper does not exists"
+ exit 1
+ fi
+ done
echo "NTLM auth helpers built: $NTLM_AUTH_HELPERS"
fi
fi
if test -n "$EXTERNAL_ACL_HELPERS"; then
+ for helper in $EXTERNAL_ACL_HELPERS; do
+ if test -f $srcdir/helpers/external_acl/$helper/Makefile.in; then
+ :
+ else
+ echo "ERROR: NTLM external acl helper $helper does not exists"
+ exit 1
+ fi
+ done
echo "External acl helpers built: $EXTERNAL_ACL_HELPERS"
fi
esac
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:3281: checking how to run the C preprocessor" >&5
+echo "configure:3305: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 3296 "configure"
+#line 3320 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3302: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 3313 "configure"
+#line 3337 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3319: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3343: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 3330 "configure"
+#line 3354 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3336: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:3372: checking for a BSD compatible install" >&5
+echo "configure:3396: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3427: checking for $ac_word" >&5
+echo "configure:3451: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:3455: checking whether ln -s works" >&5
+echo "configure:3479: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "sh", so it can be a program name with args.
set dummy sh; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3478: checking for $ac_word" >&5
+echo "configure:3502: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SH'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "false", so it can be a program name with args.
set dummy false; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3514: checking for $ac_word" >&5
+echo "configure:3538: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FALSE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "true", so it can be a program name with args.
set dummy true; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3550: checking for $ac_word" >&5
+echo "configure:3574: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_TRUE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "rm", so it can be a program name with args.
set dummy rm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3586: checking for $ac_word" >&5
+echo "configure:3610: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "mv", so it can be a program name with args.
set dummy mv; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3622: checking for $ac_word" >&5
+echo "configure:3646: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "mkdir", so it can be a program name with args.
set dummy mkdir; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3658: checking for $ac_word" >&5
+echo "configure:3682: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MKDIR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ln", so it can be a program name with args.
set dummy ln; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3694: checking for $ac_word" >&5
+echo "configure:3718: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3730: checking for $ac_word" >&5
+echo "configure:3754: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3766: checking for $ac_word" >&5
+echo "configure:3790: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:3826: checking for $ac_hdr that defines DIR" >&5
+echo "configure:3850: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3831 "configure"
+#line 3855 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:3839: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:3864: checking for opendir in -ldir" >&5
+echo "configure:3888: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3872 "configure"
+#line 3896 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:3883: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:3905: checking for opendir in -lx" >&5
+echo "configure:3929: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3913 "configure"
+#line 3937 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:3924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:3947: checking for ANSI C header files" >&5
+echo "configure:3971: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3952 "configure"
+#line 3976 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3960: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3977 "configure"
+#line 4001 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3995 "configure"
+#line 4019 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 4016 "configure"
+#line 4040 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:4027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4134: checking for $ac_hdr" >&5
+echo "configure:4158: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4139 "configure"
+#line 4163 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4168: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4172: checking for working const" >&5
+echo "configure:4196: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4177 "configure"
+#line 4201 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:4226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4250: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:4247: checking whether byte ordering is bigendian" >&5
+echo "configure:4271: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 4254 "configure"
+#line 4278 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:4265: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4289: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 4269 "configure"
+#line 4293 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:4280: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4300 "configure"
+#line 4324 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:4313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
echo $ac_n "checking if ANSI prototypes work""... $ac_c" 1>&6
-echo "configure:4338: checking if ANSI prototypes work" >&5
+echo "configure:4362: checking if ANSI prototypes work" >&5
if eval "test \"`echo '$''{'ac_cv_have_ansi_prototypes'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4344 "configure"
+#line 4368 "configure"
#include "confdefs.h"
int foo(char *); int foo (char *bar) {return 1;}
int main() {
foo("bar")
; return 0; }
EOF
-if { (eval echo configure:4351: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_ansi_prototypes="yes"
else
fi
echo $ac_n "checking for tm->tm_gmtoff""... $ac_c" 1>&6
-echo "configure:4373: checking for tm->tm_gmtoff" >&5
+echo "configure:4397: checking for tm->tm_gmtoff" >&5
if eval "test \"`echo '$''{'ac_cv_have_tm_gmoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4379 "configure"
+#line 4403 "configure"
#include "confdefs.h"
#include <time.h>
#include <sys/time.h>
foo.tm_gmtoff = 0;
; return 0; }
EOF
-if { (eval echo configure:4388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4412: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_tm_gmoff="yes"
else
fi
echo $ac_n "checking for struct mallinfo""... $ac_c" 1>&6
-echo "configure:4410: checking for struct mallinfo" >&5
+echo "configure:4434: checking for struct mallinfo" >&5
if eval "test \"`echo '$''{'ac_cv_have_struct_mallinfo'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4416 "configure"
+#line 4440 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if HAVE_MALLOC_H
foo.keepcost = 0;
; return 0; }
EOF
-if { (eval echo configure:4434: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_struct_mallinfo="yes"
else
fi
echo $ac_n "checking for extended mallinfo""... $ac_c" 1>&6
-echo "configure:4456: checking for extended mallinfo" >&5
+echo "configure:4480: checking for extended mallinfo" >&5
if eval "test \"`echo '$''{'ac_cv_have_ext_mallinfo'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4462 "configure"
+#line 4486 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <malloc.h>
foo.mxfast = 0;
; return 0; }
EOF
-if { (eval echo configure:4471: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4495: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_ext_mallinfo="yes"
else
fi
echo $ac_n "checking for struct rusage""... $ac_c" 1>&6
-echo "configure:4493: checking for struct rusage" >&5
+echo "configure:4517: checking for struct rusage" >&5
if eval "test \"`echo '$''{'ac_cv_have_struct_rusage'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4499 "configure"
+#line 4523 "configure"
#include "confdefs.h"
#if HAVE_SYS_TIME_H
struct rusage R;
; return 0; }
EOF
-if { (eval echo configure:4512: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_struct_rusage="yes"
else
fi
echo $ac_n "checking for ip->ip_hl""... $ac_c" 1>&6
-echo "configure:4534: checking for ip->ip_hl" >&5
+echo "configure:4558: checking for ip->ip_hl" >&5
if eval "test \"`echo '$''{'ac_cv_have_ip_hl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4540 "configure"
+#line 4564 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <netinet/in.h>
ip.ip_hl= 0;
; return 0; }
EOF
-if { (eval echo configure:4559: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_ip_hl="yes"
else
fi
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:4581: checking size of void *" >&5
+echo "configure:4605: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4589 "configure"
+#line 4613 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:4600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_void_p=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:4620: checking size of short" >&5
+echo "configure:4644: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4628 "configure"
+#line 4652 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:4639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:4659: checking size of int" >&5
+echo "configure:4683: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4667 "configure"
+#line 4691 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:4678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:4698: checking size of long" >&5
+echo "configure:4722: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4706 "configure"
+#line 4730 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:4717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:4737: checking size of long long" >&5
+echo "configure:4761: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4745 "configure"
+#line 4769 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:4756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking size of __int64""... $ac_c" 1>&6
-echo "configure:4776: checking size of __int64" >&5
+echo "configure:4800: checking size of __int64" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4784 "configure"
+#line 4808 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:4810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof___int64=`cat conftestval`
else
echo $ac_n "checking size of int16_t""... $ac_c" 1>&6
-echo "configure:4830: checking size of int16_t" >&5
+echo "configure:4854: checking size of int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4838 "configure"
+#line 4862 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:4864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int16_t=`cat conftestval`
else
echo $ac_n "checking size of uint16_t""... $ac_c" 1>&6
-echo "configure:4884: checking size of uint16_t" >&5
+echo "configure:4908: checking size of uint16_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_uint16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4892 "configure"
+#line 4916 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_uint16_t=`cat conftestval`
else
echo $ac_n "checking size of u_int16_t""... $ac_c" 1>&6
-echo "configure:4938: checking size of u_int16_t" >&5
+echo "configure:4962: checking size of u_int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_u_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4946 "configure"
+#line 4970 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:4972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_u_int16_t=`cat conftestval`
else
echo $ac_n "checking size of int32_t""... $ac_c" 1>&6
-echo "configure:4992: checking size of int32_t" >&5
+echo "configure:5016: checking size of int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5000 "configure"
+#line 5024 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:5026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int32_t=`cat conftestval`
else
echo $ac_n "checking size of uint32_t""... $ac_c" 1>&6
-echo "configure:5046: checking size of uint32_t" >&5
+echo "configure:5070: checking size of uint32_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_uint32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5054 "configure"
+#line 5078 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:5080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_uint32_t=`cat conftestval`
else
echo $ac_n "checking size of u_int32_t""... $ac_c" 1>&6
-echo "configure:5100: checking size of u_int32_t" >&5
+echo "configure:5124: checking size of u_int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_u_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5108 "configure"
+#line 5132 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:5134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_u_int32_t=`cat conftestval`
else
echo $ac_n "checking size of int64_t""... $ac_c" 1>&6
-echo "configure:5154: checking size of int64_t" >&5
+echo "configure:5178: checking size of int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5162 "configure"
+#line 5186 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:5188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int64_t=`cat conftestval`
else
echo $ac_n "checking size of uint64_t""... $ac_c" 1>&6
-echo "configure:5208: checking size of uint64_t" >&5
+echo "configure:5232: checking size of uint64_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_uint64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5216 "configure"
+#line 5240 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:5242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_uint64_t=`cat conftestval`
else
echo $ac_n "checking size of u_int64_t""... $ac_c" 1>&6
-echo "configure:5262: checking size of u_int64_t" >&5
+echo "configure:5286: checking size of u_int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_u_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5270 "configure"
+#line 5294 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:5296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_u_int64_t=`cat conftestval`
else
if test "x$ac_cv_sizeof_short" = "x2"; then
echo $ac_n "checking for int16_t""... $ac_c" 1>&6
-echo "configure:5318: checking for int16_t" >&5
+echo "configure:5342: checking for int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5323 "configure"
+#line 5347 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_int" = "x2"; then
echo $ac_n "checking for int16_t""... $ac_c" 1>&6
-echo "configure:5367: checking for int16_t" >&5
+echo "configure:5391: checking for int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5372 "configure"
+#line 5396 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
fi
if test "x$ac_cv_sizeof_uint16_t" = "x2"; then
echo $ac_n "checking for u_int16_t""... $ac_c" 1>&6
-echo "configure:5417: checking for u_int16_t" >&5
+echo "configure:5441: checking for u_int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5422 "configure"
+#line 5446 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_short" = "x2"; then
echo $ac_n "checking for u_int16_t""... $ac_c" 1>&6
-echo "configure:5466: checking for u_int16_t" >&5
+echo "configure:5490: checking for u_int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5471 "configure"
+#line 5495 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_int" = "x2"; then
echo $ac_n "checking for u_int16_t""... $ac_c" 1>&6
-echo "configure:5515: checking for u_int16_t" >&5
+echo "configure:5539: checking for u_int16_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int16_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5520 "configure"
+#line 5544 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
fi
if test "x$ac_cv_sizeof_int" = "x4"; then
echo $ac_n "checking for int32_t""... $ac_c" 1>&6
-echo "configure:5565: checking for int32_t" >&5
+echo "configure:5589: checking for int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5570 "configure"
+#line 5594 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif "x$ac_cv_sizeof_long" = "x4"; then
echo $ac_n "checking for int32_t""... $ac_c" 1>&6
-echo "configure:5614: checking for int32_t" >&5
+echo "configure:5638: checking for int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5619 "configure"
+#line 5643 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
fi
if test "x$ac_cv_sizeof_uint32_t" = "x4"; then
echo $ac_n "checking for u_int32_t""... $ac_c" 1>&6
-echo "configure:5664: checking for u_int32_t" >&5
+echo "configure:5688: checking for u_int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5669 "configure"
+#line 5693 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_int" = "x4"; then
echo $ac_n "checking for u_int32_t""... $ac_c" 1>&6
-echo "configure:5713: checking for u_int32_t" >&5
+echo "configure:5737: checking for u_int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5718 "configure"
+#line 5742 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_long" = "x4"; then
echo $ac_n "checking for u_int32_t""... $ac_c" 1>&6
-echo "configure:5762: checking for u_int32_t" >&5
+echo "configure:5786: checking for u_int32_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5767 "configure"
+#line 5791 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
fi
if test "x$ac_cv_sizeof_long" = "x8"; then
echo $ac_n "checking for int64_t""... $ac_c" 1>&6
-echo "configure:5812: checking for int64_t" >&5
+echo "configure:5836: checking for int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5817 "configure"
+#line 5841 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_long_long" = "x8"; then
echo $ac_n "checking for int64_t""... $ac_c" 1>&6
-echo "configure:5861: checking for int64_t" >&5
+echo "configure:5885: checking for int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5866 "configure"
+#line 5890 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof___int64" = "x8"; then
echo $ac_n "checking for int64_t""... $ac_c" 1>&6
-echo "configure:5910: checking for int64_t" >&5
+echo "configure:5934: checking for int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5915 "configure"
+#line 5939 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
fi
if test "x$ac_cv_sizeof_uint64_t" = "x8"; then
echo $ac_n "checking for u_int64_t""... $ac_c" 1>&6
-echo "configure:5960: checking for u_int64_t" >&5
+echo "configure:5984: checking for u_int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5965 "configure"
+#line 5989 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_long" = "x8"; then
echo $ac_n "checking for u_int64_t""... $ac_c" 1>&6
-echo "configure:6009: checking for u_int64_t" >&5
+echo "configure:6033: checking for u_int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6014 "configure"
+#line 6038 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof_long_long" = "x8"; then
echo $ac_n "checking for u_int64_t""... $ac_c" 1>&6
-echo "configure:6058: checking for u_int64_t" >&5
+echo "configure:6082: checking for u_int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_u_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6063 "configure"
+#line 6087 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
elif test "x$ac_cv_sizeof___int64" = "x8"; then
echo $ac_n "checking for int64_t""... $ac_c" 1>&6
-echo "configure:6107: checking for int64_t" >&5
+echo "configure:6131: checking for int64_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_int64_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6112 "configure"
+#line 6136 "configure"
#include "confdefs.h"
/* What a mess.. many systems have added the (now standard) bit types
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:6157: checking for pid_t" >&5
+echo "configure:6181: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6162 "configure"
+#line 6186 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6190: checking for size_t" >&5
+echo "configure:6214: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6195 "configure"
+#line 6219 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:6223: checking for ssize_t" >&5
+echo "configure:6247: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6228 "configure"
+#line 6252 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6256: checking for off_t" >&5
+echo "configure:6280: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6261 "configure"
+#line 6285 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:6289: checking for mode_t" >&5
+echo "configure:6313: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6294 "configure"
+#line 6318 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for fd_mask""... $ac_c" 1>&6
-echo "configure:6322: checking for fd_mask" >&5
+echo "configure:6346: checking for fd_mask" >&5
if eval "test \"`echo '$''{'ac_cv_type_fd_mask'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6327 "configure"
+#line 6351 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking size of off_t""... $ac_c" 1>&6
-echo "configure:6356: checking size of off_t" >&5
+echo "configure:6380: checking size of off_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_off_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 6364 "configure"
+#line 6388 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:6390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6414: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_off_t=`cat conftestval`
else
echo $ac_n "checking size of size_t""... $ac_c" 1>&6
-echo "configure:6410: checking size of size_t" >&5
+echo "configure:6434: checking size of size_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_size_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 6418 "configure"
+#line 6442 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:6444: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_size_t=`cat conftestval`
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6467: checking for working alloca.h" >&5
+echo "configure:6491: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6472 "configure"
+#line 6496 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6500: checking for alloca" >&5
+echo "configure:6524: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6505 "configure"
+#line 6529 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6565: checking whether alloca needs Cray hooks" >&5
+echo "configure:6589: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6570 "configure"
+#line 6594 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6595: checking for $ac_func" >&5
+echo "configure:6619: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6600 "configure"
+#line 6624 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6650: checking stack direction for C alloca" >&5
+echo "configure:6674: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 6658 "configure"
+#line 6682 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:6677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:6701: checking for socklen_t" >&5
+echo "configure:6725: checking for socklen_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6707 "configure"
+#line 6731 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
fi
echo $ac_n "checking for mtyp_t""... $ac_c" 1>&6
-echo "configure:6738: checking for mtyp_t" >&5
+echo "configure:6762: checking for mtyp_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mtyp_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6744 "configure"
+#line 6768 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/ipc.h>
fi
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:6772: checking for main in -lnsl" >&5
+echo "configure:6796: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6780 "configure"
+#line 6804 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:6787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:6815: checking for main in -lsocket" >&5
+echo "configure:6839: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6823 "configure"
+#line 6847 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:6830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for unix domain sockets""... $ac_c" 1>&6
-echo "configure:6859: checking for unix domain sockets" >&5
+echo "configure:6883: checking for unix domain sockets" >&5
if eval "test \"`echo '$''{'squid_cv_unixsocket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6865 "configure"
+#line 6889 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:6880: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6904: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
squid_cv_unixsocket=yes
else
echo "skipping libmalloc check (--enable-dlmalloc specified)"
else
echo $ac_n "checking for main in -lgnumalloc""... $ac_c" 1>&6
-echo "configure:6904: checking for main in -lgnumalloc" >&5
+echo "configure:6928: checking for main in -lgnumalloc" >&5
ac_lib_var=`echo gnumalloc'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgnumalloc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6912 "configure"
+#line 6936 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:6919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*)
echo $ac_n "checking for main in -lmalloc""... $ac_c" 1>&6
-echo "configure:6962: checking for main in -lmalloc" >&5
+echo "configure:6986: checking for main in -lmalloc" >&5
ac_lib_var=`echo malloc'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmalloc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6970 "configure"
+#line 6994 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:6977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lbsd""... $ac_c" 1>&6
-echo "configure:7010: checking for main in -lbsd" >&5
+echo "configure:7034: checking for main in -lbsd" >&5
ac_lib_var=`echo bsd'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lbsd $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7018 "configure"
+#line 7042 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lregex""... $ac_c" 1>&6
-echo "configure:7053: checking for main in -lregex" >&5
+echo "configure:7077: checking for main in -lregex" >&5
ac_lib_var=`echo regex'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lregex $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7061 "configure"
+#line 7085 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for gethostbyname in -lbind""... $ac_c" 1>&6
-echo "configure:7089: checking for gethostbyname in -lbind" >&5
+echo "configure:7113: checking for gethostbyname in -lbind" >&5
ac_lib_var=`echo bind'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lbind $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7097 "configure"
+#line 7121 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:7108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
;;
*)
echo $ac_n "checking for inet_aton in -lresolv""... $ac_c" 1>&6
-echo "configure:7142: checking for inet_aton in -lresolv" >&5
+echo "configure:7166: checking for inet_aton in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7150 "configure"
+#line 7174 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:7161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for inet_aton in -l44bsd""... $ac_c" 1>&6
-echo "configure:7177: checking for inet_aton in -l44bsd" >&5
+echo "configure:7201: checking for inet_aton in -l44bsd" >&5
ac_lib_var=`echo 44bsd'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l44bsd $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7185 "configure"
+#line 7209 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:7196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lresolv""... $ac_c" 1>&6
-echo "configure:7228: checking for main in -lresolv" >&5
+echo "configure:7252: checking for main in -lresolv" >&5
ac_lib_var=`echo resolv'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7236 "configure"
+#line 7260 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:7274: checking for main in -lm" >&5
+echo "configure:7298: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7282 "configure"
+#line 7306 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:7318: checking for crypt in -lcrypt" >&5
+echo "configure:7342: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7326 "configure"
+#line 7350 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:7337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_dl" = "yes"; then
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:7361: checking for dlopen in -ldl" >&5
+echo "configure:7385: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7369 "configure"
+#line 7393 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:7380: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_pthreads" = "yes"; then
echo $ac_n "checking for main in -lpthread""... $ac_c" 1>&6
-echo "configure:7411: checking for main in -lpthread" >&5
+echo "configure:7435: checking for main in -lpthread" >&5
ac_lib_var=`echo pthread'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7419 "configure"
+#line 7443 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_aio" = "yes"; then
echo $ac_n "checking for aio_read in -lrt""... $ac_c" 1>&6
-echo "configure:7457: checking for aio_read in -lrt" >&5
+echo "configure:7481: checking for aio_read in -lrt" >&5
ac_lib_var=`echo rt'_'aio_read | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7465 "configure"
+#line 7489 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
aio_read()
; return 0; }
EOF
-if { (eval echo configure:7476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case "$host" in
*-pc-sco3.2*)
echo $ac_n "checking for strftime in -lintl""... $ac_c" 1>&6
-echo "configure:7508: checking for strftime in -lintl" >&5
+echo "configure:7532: checking for strftime in -lintl" >&5
ac_lib_var=`echo intl'_'strftime | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7516 "configure"
+#line 7540 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strftime()
; return 0; }
EOF
-if { (eval echo configure:7527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7715: checking for $ac_func" >&5
+echo "configure:7739: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7720 "configure"
+#line 7744 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking if setresuid is implemented""... $ac_c" 1>&6
-echo "configure:7801: checking if setresuid is implemented" >&5
+echo "configure:7825: checking if setresuid is implemented" >&5
if eval "test \"`echo '$''{'ac_cv_func_setresuid'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 7809 "configure"
+#line 7833 "configure"
#include "confdefs.h"
#include <stdlib.h>
}
EOF
-if { (eval echo configure:7822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_setresuid="yes"
else
if test "$IPF_TRANSPARENT" ; then
echo $ac_n "checking if IP-Filter header files are installed""... $ac_c" 1>&6
-echo "configure:7868: checking if IP-Filter header files are installed" >&5
+echo "configure:7892: checking if IP-Filter header files are installed" >&5
# hold on to your hats...
if test "$ac_cv_header_ip_compat_h" = "yes" ||
test "$ac_cv_header_ip_fil_compat_h" = "yes" ||
if test "$PF_TRANSPARENT" ; then
echo $ac_n "checking if PF header file is installed""... $ac_c" 1>&6
-echo "configure:7909: checking if PF header file is installed" >&5
+echo "configure:7933: checking if PF header file is installed" >&5
# hold on to your hats...
if test "$ac_cv_header_net_pfvar_h" = "yes"; then
PF_TRANSPARENT="yes"
if test "$LINUX_NETFILTER" ; then
echo $ac_n "checking if Linux 2.4 kernel header files are installed""... $ac_c" 1>&6
-echo "configure:7934: checking if Linux 2.4 kernel header files are installed" >&5
+echo "configure:7958: checking if Linux 2.4 kernel header files are installed" >&5
# hold on to your hats...
if test "$ac_cv_header_linux_netfilter_ipv4_h" = "yes"; then
LINUX_NETFILTER="yes"
esac
fi
echo $ac_n "checking if GNUregex needs to be compiled""... $ac_c" 1>&6
-echo "configure:7968: checking if GNUregex needs to be compiled" >&5
+echo "configure:7992: checking if GNUregex needs to be compiled" >&5
if test -z "$USE_GNUREGEX"; then
if test "$ac_cv_func_regcomp" = "no" || test "$USE_GNUREGEX" = "yes" ; then
USE_GNUREGEX="yes"
else
cat > conftest.$ac_ext <<EOF
-#line 7974 "configure"
+#line 7998 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <regex.h>
regex_t t; regcomp(&t,"",0);
; return 0; }
EOF
-if { (eval echo configure:7982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
USE_GNUREGEX="no"
else
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8013: checking for $ac_func" >&5
+echo "configure:8037: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8018 "configure"
+#line 8042 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking Default FD_SETSIZE value""... $ac_c" 1>&6
-echo "configure:8069: checking Default FD_SETSIZE value" >&5
+echo "configure:8093: checking Default FD_SETSIZE value" >&5
if test "$cross_compiling" = yes; then
DEFAULT_FD_SETSIZE=256
else
cat > conftest.$ac_ext <<EOF
-#line 8074 "configure"
+#line 8098 "configure"
#include "confdefs.h"
#if HAVE_STDIO_H
}
EOF
-if { (eval echo configure:8099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
DEFAULT_FD_SETSIZE=`cat conftestval`
else
echo $ac_n "checking Maximum number of filedescriptors we can open""... $ac_c" 1>&6
-echo "configure:8118: checking Maximum number of filedescriptors we can open" >&5
+echo "configure:8142: checking Maximum number of filedescriptors we can open" >&5
TLDFLAGS="$LDFLAGS"
case $host in
i386-unknown-freebsd*)
SQUID_MAXFD=256
else
cat > conftest.$ac_ext <<EOF
-#line 8130 "configure"
+#line 8154 "configure"
#include "confdefs.h"
#include <stdio.h>
}
EOF
-if { (eval echo configure:8190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
SQUID_MAXFD=`cat conftestval`
else
LDFLAGS="$TLDFLAGS"
echo $ac_n "checking Default UDP send buffer size""... $ac_c" 1>&6
-echo "configure:8217: checking Default UDP send buffer size" >&5
+echo "configure:8241: checking Default UDP send buffer size" >&5
if test "$cross_compiling" = yes; then
SQUID_UDP_SO_SNDBUF=16384
else
cat > conftest.$ac_ext <<EOF
-#line 8222 "configure"
+#line 8246 "configure"
#include "confdefs.h"
#include <stdlib.h>
}
EOF
-if { (eval echo configure:8243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
SQUID_UDP_SO_SNDBUF=`cat conftestval`
else
echo $ac_n "checking Default UDP receive buffer size""... $ac_c" 1>&6
-echo "configure:8262: checking Default UDP receive buffer size" >&5
+echo "configure:8286: checking Default UDP receive buffer size" >&5
if test "$cross_compiling" = yes; then
SQUID_UDP_SO_RCVBUF=16384
else
cat > conftest.$ac_ext <<EOF
-#line 8267 "configure"
+#line 8291 "configure"
#include "confdefs.h"
#include <stdlib.h>
}
EOF
-if { (eval echo configure:8288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8312: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
SQUID_UDP_SO_RCVBUF=`cat conftestval`
else
echo $ac_n "checking Default TCP send buffer size""... $ac_c" 1>&6
-echo "configure:8307: checking Default TCP send buffer size" >&5
+echo "configure:8331: checking Default TCP send buffer size" >&5
if test "$cross_compiling" = yes; then
SQUID_TCP_SO_SNDBUF=16384
else
cat > conftest.$ac_ext <<EOF
-#line 8312 "configure"
+#line 8336 "configure"
#include "confdefs.h"
#include <stdlib.h>
}
EOF
-if { (eval echo configure:8333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
SQUID_TCP_SO_SNDBUF=`cat conftestval`
else
echo $ac_n "checking Default TCP receive buffer size""... $ac_c" 1>&6
-echo "configure:8352: checking Default TCP receive buffer size" >&5
+echo "configure:8376: checking Default TCP receive buffer size" >&5
if test "$cross_compiling" = yes; then
SQUID_TCP_SO_RCVBUF=16384
else
cat > conftest.$ac_ext <<EOF
-#line 8357 "configure"
+#line 8381 "configure"
#include "confdefs.h"
#include <stdlib.h>
}
EOF
-if { (eval echo configure:8378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8402: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
SQUID_TCP_SO_RCVBUF=`cat conftestval`
else
echo $ac_n "checking if sys_errlist is already defined""... $ac_c" 1>&6
-echo "configure:8397: checking if sys_errlist is already defined" >&5
+echo "configure:8421: checking if sys_errlist is already defined" >&5
if eval "test \"`echo '$''{'ac_cv_needs_sys_errlist'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8402 "configure"
+#line 8426 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
char *s = sys_errlist;
; return 0; }
EOF
-if { (eval echo configure:8409: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8433: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_needs_sys_errlist="no"
else
fi
echo $ac_n "checking for libresolv _dns_ttl_ hack""... $ac_c" 1>&6
-echo "configure:8431: checking for libresolv _dns_ttl_ hack" >&5
+echo "configure:8455: checking for libresolv _dns_ttl_ hack" >&5
cat > conftest.$ac_ext <<EOF
-#line 8433 "configure"
+#line 8457 "configure"
#include "confdefs.h"
extern int _dns_ttl_;
int main() {
return _dns_ttl_;
; return 0; }
EOF
-if { (eval echo configure:8440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
rm -f conftest*
echo $ac_n "checking if inet_ntoa() actually works""... $ac_c" 1>&6
-echo "configure:8456: checking if inet_ntoa() actually works" >&5
+echo "configure:8480: checking if inet_ntoa() actually works" >&5
if test "$cross_compiling" = yes; then
INET_NTOA_RESULT="broken"
else
cat > conftest.$ac_ext <<EOF
-#line 8461 "configure"
+#line 8485 "configure"
#include "confdefs.h"
#include <stdlib.h>
}
EOF
-if { (eval echo configure:8480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
INET_NTOA_RESULT=`cat conftestval`
else
if test "$ac_cv_header_sys_statvfs_h" = "yes" ; then
echo $ac_n "checking for working statvfs() interface""... $ac_c" 1>&6
-echo "configure:8506: checking for working statvfs() interface" >&5
+echo "configure:8530: checking for working statvfs() interface" >&5
cat > conftest.$ac_ext <<EOF
-#line 8508 "configure"
+#line 8532 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:8525: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8549: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_func_statvfs=yes
else
fi
echo $ac_n "checking for _res.nsaddr_list""... $ac_c" 1>&6
-echo "configure:8545: checking for _res.nsaddr_list" >&5
+echo "configure:8569: checking for _res.nsaddr_list" >&5
if eval "test \"`echo '$''{'ac_cv_have_res_nsaddr_list'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8550 "configure"
+#line 8574 "configure"
#include "confdefs.h"
#if HAVE_SYS_TYPES_H
_res.nsaddr_list[0];
; return 0; }
EOF
-if { (eval echo configure:8573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_res_nsaddr_list="yes"
else
if test $ac_cv_have_res_nsaddr_list = "no" ; then
echo $ac_n "checking for _res.ns_list""... $ac_c" 1>&6
-echo "configure:8595: checking for _res.ns_list" >&5
+echo "configure:8619: checking for _res.ns_list" >&5
if eval "test \"`echo '$''{'ac_cv_have_res_ns_list'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8600 "configure"
+#line 8624 "configure"
#include "confdefs.h"
#if HAVE_SYS_TYPES_H
_res.ns_list[0].addr;
; return 0; }
EOF
-if { (eval echo configure:8623: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8647: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_res_ns_list="yes"
else