--- /dev/null
+From f01870884a81aae930b0c794f62d7ce53593c714 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 11:35:46 -0500
+Subject: ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
+
+From: Gongjun Song <gongjun.song@intel.com>
+
+[ Upstream commit b07908ab26ceab51165c13714277c19252e62594 ]
+
+Add RaptorLake-P PCI IDs
+
+Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
+Signed-off-by: Gongjun Song <gongjun.song@intel.com>
+Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Link: https://lore.kernel.org/r/20220421163546.319604-1-pierre-louis.bossart@linux.intel.com
+Signed-off-by: Takashi Iwai <tiwai@suse.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/hda/intel-dsp-config.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
+index 8b0a16ba27d3..a8fe01764b25 100644
+--- a/sound/hda/intel-dsp-config.c
++++ b/sound/hda/intel-dsp-config.c
+@@ -424,6 +424,15 @@ static const struct config_entry config_table[] = {
+ .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
+ .device = 0x54c8,
+ },
++ /* RaptorLake-P */
++ {
++ .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
++ .device = 0x51ca,
++ },
++ {
++ .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
++ .device = 0x51cb,
++ },
+ #endif
+
+ };
+--
+2.35.1
+
--- /dev/null
+From b01e2924f413e12889884ce9602450dca044e32f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 7 Apr 2022 23:44:30 +0800
+Subject: arch: xtensa: platforms: Fix deadlock in rs_close()
+
+From: Duoming Zhou <duoming@zju.edu.cn>
+
+[ Upstream commit eb5adc70754d26a260f8b42d39db42da0d0af500 ]
+
+There is a deadlock in rs_close(), which is shown
+below:
+
+ (Thread 1) | (Thread 2)
+ | rs_open()
+rs_close() | mod_timer()
+ spin_lock_bh() //(1) | (wait a time)
+ ... | rs_poll()
+ del_timer_sync() | spin_lock() //(2)
+ (wait timer to stop) | ...
+
+We hold timer_lock in position (1) of thread 1 and
+use del_timer_sync() to wait timer to stop, but timer handler
+also need timer_lock in position (2) of thread 2.
+As a result, rs_close() will block forever.
+
+This patch deletes the redundant timer_lock in order to
+prevent the deadlock. Because there is no race condition
+between rs_close, rs_open and rs_poll.
+
+Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
+Message-Id: <20220407154430.22387-1-duoming@zju.edu.cn>
+Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/xtensa/platforms/iss/console.c | 8 --------
+ 1 file changed, 8 deletions(-)
+
+diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
+index 81d7c7e8f7e9..10b79d3c74e0 100644
+--- a/arch/xtensa/platforms/iss/console.c
++++ b/arch/xtensa/platforms/iss/console.c
+@@ -36,24 +36,19 @@ static void rs_poll(struct timer_list *);
+ static struct tty_driver *serial_driver;
+ static struct tty_port serial_port;
+ static DEFINE_TIMER(serial_timer, rs_poll);
+-static DEFINE_SPINLOCK(timer_lock);
+
+ static int rs_open(struct tty_struct *tty, struct file * filp)
+ {
+- spin_lock_bh(&timer_lock);
+ if (tty->count == 1)
+ mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+- spin_unlock_bh(&timer_lock);
+
+ return 0;
+ }
+
+ static void rs_close(struct tty_struct *tty, struct file * filp)
+ {
+- spin_lock_bh(&timer_lock);
+ if (tty->count == 1)
+ del_timer_sync(&serial_timer);
+- spin_unlock_bh(&timer_lock);
+ }
+
+
+@@ -73,8 +68,6 @@ static void rs_poll(struct timer_list *unused)
+ int rd = 1;
+ unsigned char c;
+
+- spin_lock(&timer_lock);
+-
+ while (simc_poll(0)) {
+ rd = simc_read(0, &c, 1);
+ if (rd <= 0)
+@@ -87,7 +80,6 @@ static void rs_poll(struct timer_list *unused)
+ tty_flip_buffer_push(port);
+ if (rd)
+ mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+- spin_unlock(&timer_lock);
+ }
+
+
+--
+2.35.1
+
--- /dev/null
+From 540f12d2c20ffc7839d7c1fa89e8ee51d910b602 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 14 Mar 2022 17:34:45 +0100
+Subject: ARM: dts: am33xx-l4: Add missing touchscreen clock properties
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+[ Upstream commit c21a7434d6cc216a910dd35632617850f1751f4c ]
+
+When adding support for TI magadc (Magnetic Stripe Reader and ADC), the
+MFD driver common to the touchscreen and the ADC got updated to ease the
+insertion of a new DT node for the ADC, with its own compatible, clocks,
+etc. Commit 235a96e92c16 ("mfd: ti_am335x_tscadc: Don't search the tree
+for our clock") removed one compatible specific information which was
+the clock name, because the clock was looked up from scratch in the DT
+while this hardware block was only fed by a single clock, already
+defined and properly filled in the DT.
+
+Problem is, this change was only validated with an am437x-based board,
+where the clocks are effectively correctly defined and referenced. But
+on am33xx, the ADC clock is also correctly defined but is not referenced
+with a clock phandle as it ought to be.
+
+The touchscreen bindings clearly state that the clocks/clock-names
+properties are mandatory, but they have been forgotten in one DTSI. This
+was probably not noticed in the first place because of the clock
+actually existing and the clk_get() call going through all the tree
+anyway.
+
+Add the missing clock phandles in the am33xx touchscreen description.
+
+Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
+Fixes: 235a96e92c16 ("mfd: ti_am335x_tscadc: Don't search the tree for our clock")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
+Message-Id: <20220314163445.79807-1-miquel.raynal@bootlin.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/am33xx-l4.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
+index c9629cb5ccd1..7da42a5b959c 100644
+--- a/arch/arm/boot/dts/am33xx-l4.dtsi
++++ b/arch/arm/boot/dts/am33xx-l4.dtsi
+@@ -263,6 +263,8 @@ tscadc: tscadc@0 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x1000>;
+ interrupts = <16>;
++ clocks = <&adc_tsc_fck>;
++ clock-names = "fck";
+ status = "disabled";
+ dmas = <&edma 53 0>, <&edma 57 0>;
+ dma-names = "fifo0", "fifo1";
+--
+2.35.1
+
--- /dev/null
+From c8ddf9e4cec2b18a6766a79d1737494f3a334789 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 26 Feb 2022 15:48:19 -0600
+Subject: ARM: dts: am3517-evm: Fix misc pinmuxing
+
+From: Adam Ford <aford173@gmail.com>
+
+[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]
+
+The bootloader for the AM3517 has previously done much of the pin
+muxing, but as the bootloader is moving more and more to a model
+based on the device tree, it may no longer automatically mux the
+pins, so it is necessary to add the pinmuxing to the Linux device
+trees so the respective peripherals can remain functional.
+
+Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
+Signed-off-by: Adam Ford <aford173@gmail.com>
+Message-Id: <20220226214820.747847-1-aford173@gmail.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/am3517-evm.dts | 45 +++++++++++++++++++++++++++----
+ arch/arm/boot/dts/am3517-som.dtsi | 9 +++++++
+ 2 files changed, 49 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
+index 0d2fac98ce7d..c8b80f156ec9 100644
+--- a/arch/arm/boot/dts/am3517-evm.dts
++++ b/arch/arm/boot/dts/am3517-evm.dts
+@@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb1_rst_pins>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+ #phy-cells = <0>;
+@@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy {
+ };
+
+ &davinci_emac {
+- status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <ðernet_pins>;
++ status = "okay";
+ };
+
+ &davinci_mdio {
+@@ -193,6 +197,8 @@ dpi_out: endpoint {
+ };
+
+ &i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+ /* User DIP swithes [1:8] / User LEDS [1:2] */
+ tca6416: gpio@21 {
+@@ -205,6 +211,8 @@ tca6416: gpio@21 {
+ };
+
+ &i2c3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+ };
+
+@@ -223,6 +231,8 @@ &mmc3 {
+ };
+
+ &usbhshost {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb1_pins>;
+ port1-mode = "ehci-phy";
+ };
+
+@@ -231,8 +241,35 @@ &usbhsehci {
+ };
+
+ &omap3_pmx_core {
+- pinctrl-names = "default";
+- pinctrl-0 = <&hsusb1_rst_pins>;
++
++ ethernet_pins: pinmux_ethernet_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
++ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
++ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
++ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
++ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
++ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
++ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
++ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
++ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
++ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
++ >;
++ };
++
++ i2c2_pins: pinmux_i2c2_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
++ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
++ >;
++ };
++
++ i2c3_pins: pinmux_i2c3_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
++ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
++ >;
++ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+@@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
+ };
+
+ &omap3_pmx_core2 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&hsusb1_pins>;
+
+ hsusb1_pins: pinmux_hsusb1_pins {
+ pinctrl-single,pins = <
+diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
+index 8b669e2eafec..f7b680f6c48a 100644
+--- a/arch/arm/boot/dts/am3517-som.dtsi
++++ b/arch/arm/boot/dts/am3517-som.dtsi
+@@ -69,6 +69,8 @@ nand@0,0 {
+ };
+
+ &i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ s35390a: s35390a@30 {
+@@ -179,6 +181,13 @@ bluetooth {
+
+ &omap3_pmx_core {
+
++ i2c1_pins: pinmux_i2c1_pins {
++ pinctrl-single,pins = <
++ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
++ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
++ >;
++ };
++
+ wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
+--
+2.35.1
+
--- /dev/null
+From b2c6bf5be4d2e1520170f929e68e3deb2040ab17 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 31 Mar 2022 17:13:23 +0300
+Subject: ARM: dts: at91: fix pinctrl phandles
+
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+
+[ Upstream commit 0c640d9544d0109da3889d71ae77301e556db977 ]
+
+Commit bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all
+gpios") introduces pinctrl phandles for pins used by individual
+controllers to avoid failures due to commit 2ab73c6d8323 ("gpio:
+Support GPIO controllers without pin-ranges"). For SPI controllers
+available on SAMA5D4 and SAMA5D3 some of the pins are defined in
+SoC specific dtsi on behalf of pinctrl-0. Adding extra pinctrl phandles
+on board specific dts also on behalf of pinctrl-0 overwrite the pinctrl-0
+phandle specified in SoC specific dtsi. Thus add the board specific
+pinctrl to pinctrl-1.
+
+Fixes: bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all gpios")
+Depends-on: 5c8b49852910 ("ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name")
+Reported-by: Ajay Kathat <ajay.kathat@microchip.com>
+Co-developed-by: Ajay Kathat <ajay.kathat@microchip.com>
+Signed-off-by: Ajay Kathat <ajay.kathat@microchip.com>
+Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20220331141323.194355-2-claudiu.beznea@microchip.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/at91-sama5d3_xplained.dts | 8 ++++----
+ arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
+ 2 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+index d72c042f2850..a49c2966b41e 100644
+--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
++++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+@@ -57,8 +57,8 @@ slot@0 {
+ };
+
+ spi0: spi@f0004000 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_spi0_cs>;
++ pinctrl-names = "default", "cs";
++ pinctrl-1 = <&pinctrl_spi0_cs>;
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+ status = "okay";
+ };
+@@ -171,8 +171,8 @@ slot@0 {
+ };
+
+ spi1: spi@f8008000 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_spi1_cs>;
++ pinctrl-names = "default", "cs";
++ pinctrl-1 = <&pinctrl_spi1_cs>;
+ cs-gpios = <&pioC 25 0>;
+ status = "okay";
+ };
+diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+index accb92cfac44..e519d2747936 100644
+--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
++++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+@@ -81,8 +81,8 @@ usart4: serial@fc010000 {
+ };
+
+ spi1: spi@fc018000 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_spi1_cs>;
++ pinctrl-names = "default", "cs";
++ pinctrl-1 = <&pinctrl_spi1_cs>;
+ cs-gpios = <&pioB 21 0>;
+ status = "okay";
+ };
+--
+2.35.1
+
--- /dev/null
+From 94d77e78f834cc865250100d851858aa58126178 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 4 Apr 2022 11:28:05 +0100
+Subject: ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
+
+From: Mark Brown <broonie@kernel.org>
+
+[ Upstream commit 0e486fe341fabd8e583f3d601a874cd394979c45 ]
+
+The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
+PCK0 output of the SoC and is expected to be set to 12MHz. Previously
+this was mapped using pre-common clock API calls in the audio machine
+driver but the conversion to the common clock framework broke that so
+describe things in the DT instead.
+
+Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+index 87bb39060e8b..ca03685f0f08 100644
+--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
++++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+@@ -219,6 +219,12 @@ i2c-gpio-0 {
+ wm8731: wm8731@1b {
+ compatible = "wm8731";
+ reg = <0x1b>;
++
++ /* PCK0 at 12MHz */
++ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
++ clock-names = "mclk";
++ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
++ assigned-clock-rates = <12000000>;
+ };
+ };
+
+--
+2.35.1
+
--- /dev/null
+From 681d751918e29ff1d4815f48070a630cdc23703e Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 31 Mar 2022 17:13:22 +0300
+Subject: ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
+
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+
+[ Upstream commit 5c8b49852910caffeebb1ce541fdd264ffc691b8 ]
+
+Pinctrl phandle is for spi1 so rename it to reflect this.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20220331141323.194355-1-claudiu.beznea@microchip.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+index d241c24f0d83..accb92cfac44 100644
+--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
++++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+@@ -82,7 +82,7 @@ usart4: serial@fc010000 {
+
+ spi1: spi@fc018000 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_spi0_cs>;
++ pinctrl-0 = <&pinctrl_spi1_cs>;
+ cs-gpios = <&pioB 21 0>;
+ status = "okay";
+ };
+@@ -140,7 +140,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+- pinctrl_spi0_cs: spi0_cs_default {
++ pinctrl_spi1_cs: spi1_cs_default {
+ atmel,pins =
+ <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+--
+2.35.1
+
--- /dev/null
+From 700bf52d638b847a5f8d2765cc0058675beca240 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 12 Apr 2022 12:26:51 +0300
+Subject: ARM: dts: dra7: Fix suspend warning for vpe powerdomain
+
+From: Tony Lindgren <tony@atomide.com>
+
+[ Upstream commit 8d2453d9a307c2eafd21242dd73f35f05fb7ce74 ]
+
+We currently are getting the following warning after a system suspend:
+
+Powerdomain (vpe_pwrdm) didn't enter target state 0
+
+Looks like this is because the STANDBYMODE bit for SMART_IDLE should
+not be used. The TRM "Table 12-348. VPE_SYSCONFIG" says that the value
+for SMART_IDLE is "0x2: Same behavior as bit-field value of 0x1". But
+if the SMART_IDLE value is used, PM_VPE_PWRSTST LASTPOWERSTATEENTERED
+bits always show value of 3.
+
+Let's fix the issue by dropping SMART_IDLE for vpe. And let's also add
+the missing the powerdomain for vpe.
+
+Fixes: 1a2095160594 ("ARM: dts: dra7: Add ti-sysc node for VPE")
+Cc: Benoit Parrot <bparrot@ti.com>
+Reported-by: Kevin Hilman <khilman@baylibre.com>
+Reviewed-by: Kevin Hilman <khilman@baylibre.com>
+Tested-by: Kevin Hilman <khilman@baylibre.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/dra7-l4.dtsi | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
+index 0a11bacffc1f..5733e3a4ea8e 100644
+--- a/arch/arm/boot/dts/dra7-l4.dtsi
++++ b/arch/arm/boot/dts/dra7-l4.dtsi
+@@ -4188,11 +4188,11 @@ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
+ reg = <0x1d0010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+- <SYSC_IDLE_NO>,
+- <SYSC_IDLE_SMART>;
++ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
++ power-domains = <&prm_vpe>;
+ clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+--
+2.35.1
+
--- /dev/null
+From 3f3410008ea1676c8c5186e2735f24dc408a248a Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 8 Mar 2022 14:00:20 +0100
+Subject: ARM: dts: Fix mmc order for omap3-gta04
+
+From: H. Nikolaus Schaller <hns@goldelico.com>
+
+[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]
+
+Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
+introduces general mmc aliases. Let's tailor them to the need
+of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.
+
+Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
+Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
+Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/omap3-gta04.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
+index 7e3d8147e2c1..0365f06165e9 100644
+--- a/arch/arm/boot/dts/omap3-gta04.dtsi
++++ b/arch/arm/boot/dts/omap3-gta04.dtsi
+@@ -31,6 +31,8 @@ chosen {
+ aliases {
+ display0 = &lcd;
+ display1 = &tv0;
++ /delete-property/ mmc2;
++ /delete-property/ mmc3;
+ };
+
+ ldo_3v3: fixedregulator {
+--
+2.35.1
+
--- /dev/null
+From c47abaeb3f8a38892117746c37113b038cf063b0 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 26 Mar 2022 12:14:55 -0300
+Subject: ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
+
+From: Fabio Estevam <festevam@gmail.com>
+
+[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]
+
+On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec
+on the SoM is often not detected and the following error message is
+seen when the sgtl5000 driver tries to read the ID register:
+
+sgtl5000 1-000a: Error reading chip id -6
+
+The reason for the error is that the MCLK clock is not provided
+early enough.
+
+Fix the problem by describing the MCLK pinctrl inside the codec
+node instead of placing it inside the audmux pinctrl group.
+
+With this change applied the sgtl5000 is always detected on every boot.
+
+Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM")
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+Reviewed-by: Tim Harvey <tharvey@gateworks.com>
+Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+index ed2739e39085..bd763bae596b 100644
+--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+@@ -286,6 +286,8 @@ vgen6_reg: vgen6 {
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sgtl5000>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDIO-supply = <®_module_3v3>;
+@@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+- /* SGTL5000 sys_mclk */
+- MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
+@@ -811,6 +811,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+ >;
+ };
+
++ pinctrl_sgtl5000: sgtl5000grp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
++ >;
++ };
++
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+--
+2.35.1
+
--- /dev/null
+From 48ed1c9e25fa4ca03469aa171902f06f78c876c0 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 14 Apr 2022 10:50:54 +0200
+Subject: ARM: dts: imx6ull-colibri: fix vqmmc regulator
+
+From: Max Krummenacher <max.krummenacher@toradex.com>
+
+[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ]
+
+The correct spelling for the property is gpios. Otherwise, the regulator
+will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
+can use UHS-I modes will fail.
+
+Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
+Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
+Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
+Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/imx6ull-colibri.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
+index 7f35a06dff95..951a2a6c5a65 100644
+--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
++++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
+@@ -37,7 +37,7 @@ reg_module_3v3_avdd: regulator-module-3v3-avdd {
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-gpio";
+- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
++ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_snvs_reg_sd>;
+ regulator-always-on;
+--
+2.35.1
+
--- /dev/null
+From 91dda074bd89d19acf14ae65ce1563dd3a7497cb Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 3 Mar 2022 11:18:17 -0600
+Subject: ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
+
+From: Adam Ford <aford173@gmail.com>
+
+[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]
+
+The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
+same, but the macros which define the pinmuxing are different
+between OMAP3530 and DM3730. The pinmuxing was correct for
+for the DM3730, but wrong for the OMAP3530. Since the boot loader
+was correctly pin-muxing the pins, this was not obvious. As the
+bootloader not guaranteed to pinmux all the pins any more, this
+causes an issue, so the pinmux needs to be moved from a common
+file to their respective board files.
+
+Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
+Signed-off-by: Adam Ford <aford173@gmail.com>
+Message-Id: <20220303171818.11060-1-aford173@gmail.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts | 15 +++++++++++++++
+ arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 15 +++++++++++++++
+ arch/arm/boot/dts/logicpd-som-lv.dtsi | 15 ---------------
+ 3 files changed, 30 insertions(+), 15 deletions(-)
+
+diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+index 2a0a98fe67f0..3240c67e0c39 100644
+--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
++++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+@@ -11,3 +11,18 @@ / {
+ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
+ };
++
++&omap3_pmx_core2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb2_2_pins>;
++ hsusb2_2_pins: pinmux_hsusb2_2_pins {
++ pinctrl-single,pins = <
++ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
++ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
++ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
++ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
++ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
++ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
++ >;
++ };
++};
+diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+index a604d92221a4..c757f0d7781c 100644
+--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
++++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+@@ -11,3 +11,18 @@ / {
+ model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+ };
++
++&omap3_pmx_core2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&hsusb2_2_pins>;
++ hsusb2_2_pins: pinmux_hsusb2_2_pins {
++ pinctrl-single,pins = <
++ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
++ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
++ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
++ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
++ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
++ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
++ >;
++ };
++};
+diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
+index b56524cc7fe2..55b619c99e24 100644
+--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
++++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
+@@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
+ };
+ };
+
+-&omap3_pmx_core2 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&hsusb2_2_pins>;
+- hsusb2_2_pins: pinmux_hsusb2_2_pins {
+- pinctrl-single,pins = <
+- OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+- OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+- OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+- OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+- OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+- >;
+- };
+-};
+-
+ &uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+ pinctrl-names = "default";
+--
+2.35.1
+
--- /dev/null
+From 70a463bd323680706f2d45aa531b312ec5ed8178 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 9 Mar 2022 10:43:01 +0000
+Subject: ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ]
+
+The of_find_compatible_node() function returns a node pointer with
+refcount incremented, We should use of_node_put() on it when done
+Add the missing of_node_put() to release the refcount.
+
+Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Message-Id: <20220309104302.18398-1-linmq006@gmail.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/mach-omap2/omap4-common.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
+index 5c3845730dbf..0b80f8bcd304 100644
+--- a/arch/arm/mach-omap2/omap4-common.c
++++ b/arch/arm/mach-omap2/omap4-common.c
+@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
+ gic_dist_base_addr = of_iomap(np, 0);
++ of_node_put(np);
+ WARN_ON(!gic_dist_base_addr);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
+ twd_base = of_iomap(np, 0);
++ of_node_put(np);
+ WARN_ON(!twd_base);
+
+ skip_errata_init:
+--
+2.35.1
+
--- /dev/null
+From 7f3ede96a3bfbfe39751aba8d83b1946fe1b66d5 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 18 Apr 2022 14:47:31 -0300
+Subject: arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
+
+From: Fabio Estevam <festevam@denx.de>
+
+[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]
+
+The ROHM BD71847 PMIC has a 32.768 kHz clock.
+
+Describe the PMIC clock to fix the following boot errors:
+
+bd718xx-clk bd71847-clk.1.auto: No parent clk found
+bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
+
+Based on the same fix done for imx8mm-evk as per commit
+a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
+
+Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
+Signed-off-by: Fabio Estevam <festevam@denx.de>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+index 7dfee715a2c4..d8ce217c6016 100644
+--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
++++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+@@ -59,6 +59,10 @@ pmic@4b {
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
++ #clock-cells = <0>;
++ clocks = <&osc_32k 0>;
++ clock-output-names = "clk-32k-out";
++
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+--
+2.35.1
+
--- /dev/null
+From 81ed7ec63eebcf811b9a8846243d7f08cc02e69f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 4 Apr 2022 01:42:05 +0200
+Subject: arm64: dts: imx8mn: Fix SAI nodes
+
+From: Marek Vasut <marex@denx.de>
+
+[ Upstream commit 574518b7ccbaef74cb89eb1a1a0da88afa1e0113 ]
+
+The most specific compatible string element should be "fsl,imx8mn-sai"
+on i.MX8M Nano, fix it from current "fsl,imx8mm-sai" (two Ms, likely
+due to copy-paste error from i.MX8M Mini).
+
+Fixes: 9e9860069725f ("arm64: dts: imx8mn: Add SAI nodes")
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Adam Ford <aford173@gmail.com>
+Cc: Fabio Estevam <festevam@gmail.com>
+Cc: Peng Fan <peng.fan@nxp.com>
+Cc: Shawn Guo <shawnguo@kernel.org>
+Cc: NXP Linux Team <linux-imx@nxp.com>
+To: linux-arm-kernel@lists.infradead.org
+Reviewed-by: Adam Ford <aford173@gmail.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+index b8d49d5f2668..98bfb53491fc 100644
+--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
++++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+@@ -291,7 +291,7 @@ spba2: spba-bus@30000000 {
+ ranges;
+
+ sai2: sai@30020000 {
+- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
++ compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+ reg = <0x30020000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
+@@ -305,7 +305,7 @@ sai2: sai@30020000 {
+ };
+
+ sai3: sai@30030000 {
+- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
++ compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+@@ -319,7 +319,7 @@ sai3: sai@30030000 {
+ };
+
+ sai5: sai@30050000 {
+- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
++ compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+ reg = <0x30050000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
+@@ -335,7 +335,7 @@ sai5: sai@30050000 {
+ };
+
+ sai6: sai@30060000 {
+- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
++ compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+ reg = <0x30060000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
+@@ -392,7 +392,7 @@ spdif1: spdif@30090000 {
+ };
+
+ sai7: sai@300b0000 {
+- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
++ compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+ reg = <0x300b0000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
+--
+2.35.1
+
--- /dev/null
+From c3243920faf2c27a5ba2e724b980bd79ffb9b343 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 31 Mar 2022 15:02:06 +0200
+Subject: arm64: dts: imx8mq-tqma8mq: change the spi-nor tx
+
+From: Alexander Stein <alexander.stein@ew.tq-group.com>
+
+[ Upstream commit c7b45c79fb279e539346919a5c196e417925719e ]
+
+This fixes the qspi read command by importing the changes from commit
+04aa946d57b2 ("arm64: dts: imx8: change the spi-nor tx").
+
+Fixes: b186b8b6e770 ("arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M")
+Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+index 8aedcddfeab8..2c63b01e93e0 100644
+--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
++++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+@@ -253,7 +253,7 @@ flash0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <84000000>;
+- spi-tx-bus-width = <4>;
++ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ };
+ };
+--
+2.35.1
+
--- /dev/null
+From b2bde388c91ad7379d306264eaf42bb7b49ad137 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 4 Mar 2022 16:04:43 +0800
+Subject: arm64: dts: imx8qm: Correct SCU clock controller's compatible
+ property
+
+From: Liu Ying <victor.liu@nxp.com>
+
+[ Upstream commit dd2737fab4a6ce9ba4eb84842bedbd87d55241a6 ]
+
+The fsl,scu.txt dt-binding documentation explicitly mentions
+that the compatible string should be either "fsl,imx8qm-clock"
+or "fsl,imx8qxp-clock", followed by "fsl,scu-clk". Also, i.MX8qm
+SCU clocks and i.MX8qxp SCU clocks are really not the same, so
+we have to set the compatible property according to SoC name.
+Let's correct the i.MX8qm clock controller's compatible property
+from
+"fsl,imx8qxp-clk", "fsl,scu-clk"
+to
+"fsl,imx8qm-clk", "fsl,scu-clk" .
+
+Fixes: f2180be18a63 ("arm64: dts: imx: add imx8qm common dts file")
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: Shawn Guo <shawnguo@kernel.org>
+Cc: Sascha Hauer <s.hauer@pengutronix.de>
+Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
+Cc: Fabio Estevam <festevam@gmail.com>
+Cc: NXP Linux Team <linux-imx@nxp.com>
+Signed-off-by: Liu Ying <victor.liu@nxp.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+index 4a7c017b5f31..8fecd54198fb 100644
+--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
++++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+@@ -193,7 +193,7 @@ pd: imx8qx-pd {
+ };
+
+ clk: clock-controller {
+- compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
++ compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
+ #clock-cells = <2>;
+ };
+
+--
+2.35.1
+
--- /dev/null
+From 6b79ecd3c681600dd26ad43e3cd06ec11168eb37 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 10 Feb 2022 10:06:37 +0000
+Subject: arm64: dts: meson: remove CPU opps below 1GHz for G12B boards
+
+From: Christian Hewitt <christianshewitt@gmail.com>
+
+[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]
+
+Amlogic G12B devices experience CPU stalls and random board wedges when
+the system idles and CPU cores clock down to lower opp points. Recent
+vendor kernels include a change to remove 100-250MHz and other distro
+sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
+are removed or the CPU governor forced to performance stalls are still
+observed, so let's remove them to improve stability and uptime.
+
+Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
+Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ .../boot/dts/amlogic/meson-g12b-a311d.dtsi | 40 -------------------
+ .../boot/dts/amlogic/meson-g12b-s922x.dtsi | 40 -------------------
+ 2 files changed, 80 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+index d61f43052a34..8e9ad1e51d66 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <731000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <761000>;
+@@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <731000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <731000>;
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+index 1e5d0ee5d541..44c23c984034 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <731000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <731000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <731000>;
+@@ -76,26 +56,6 @@ cpub_opp_table_1: opp-table-1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <751000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <751000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <751000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <667000000>;
+- opp-microvolt = <751000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <771000>;
+--
+2.35.1
+
--- /dev/null
+From 28c4a5335031ee51b8552d89f110ef0eab8dfc3e Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 10 Feb 2022 10:06:38 +0000
+Subject: arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards
+
+From: Christian Hewitt <christianshewitt@gmail.com>
+
+[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]
+
+Amlogic SM1 devices experience CPU stalls and random board wedges when
+the system idles and CPU cores clock down to lower opp points. Recent
+vendor kernels include a change to remove 100-250MHz and other distro
+sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
+are removed or the CPU governor forced to performance stalls are still
+observed, so let's remove them to improve stability and uptime.
+
+Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
+Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 20 --------------------
+ 1 file changed, 20 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+index 3d8b1f4f2001..78bdbd2ccc9d 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+@@ -95,26 +95,6 @@ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+- opp-100000000 {
+- opp-hz = /bits/ 64 <100000000>;
+- opp-microvolt = <730000>;
+- };
+-
+- opp-250000000 {
+- opp-hz = /bits/ 64 <250000000>;
+- opp-microvolt = <730000>;
+- };
+-
+- opp-500000000 {
+- opp-hz = /bits/ 64 <500000000>;
+- opp-microvolt = <730000>;
+- };
+-
+- opp-667000000 {
+- opp-hz = /bits/ 64 <666666666>;
+- opp-microvolt = <750000>;
+- };
+-
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <770000>;
+--
+2.35.1
+
--- /dev/null
+From 6ca24e58d6d2e27a88bfb20f61cf707a4ae7f7c9 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 11 Apr 2022 10:44:28 -0400
+Subject: arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for
+ CON1
+
+From: Guillaume Giraudon <ggiraudon@prism19.com>
+
+[ Upstream commit 962dd65e575dde950ef0844568edc37cfb39f302 ]
+
+The labels for lines 61 through 84 on the periphs-banks were offset by 2.
+2 lines are missing in the BOOT GPIO lines (contains 14, should be 16)
+Added 2 empty entries in BOOT to realigned the rest of GPIO labels
+to match the Banana Pi M5 schematics.
+
+(Thanks to Neil Armstrong for the heads up on the position of the missing pins)
+
+Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
+Signed-off-by: Guillaume Giraudon <ggiraudon@prism19.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
+Link: https://lore.kernel.org/r/20220411144427.874-1-ggiraudon@prism19.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+index 5751c48620ed..cadba194b149 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+@@ -437,6 +437,7 @@ &gpio {
+ "",
+ "eMMC_RST#", /* BOOT_12 */
+ "eMMC_DS", /* BOOT_13 */
++ "", "",
+ /* GPIOC */
+ "SD_D0_B", /* GPIOC_0 */
+ "SD_D1_B", /* GPIOC_1 */
+--
+2.35.1
+
--- /dev/null
+From 1c26253a5e90f03c91ed957e805f220a6812e9bc Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 24 Mar 2022 16:18:39 +0800
+Subject: ASoC: cs35l41: Fix a shift-out-of-bounds warning found by UBSAN
+
+From: Hui Wang <hui.wang@canonical.com>
+
+[ Upstream commit 0b3d5d2e358ca6772fc3662fca27acb12a682fbf ]
+
+We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers
+a warning calltrace like below:
+
+cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24
+cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0
+================================================================================
+UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8
+shift exponent 64 is too large for 64-bit type 'long unsigned int'
+CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
+Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
+Call Trace:
+ <TASK>
+ show_stack+0x52/0x58
+ dump_stack_lvl+0x4a/0x5f
+ dump_stack+0x10/0x12
+ ubsan_epilogue+0x9/0x45
+ __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
+ ? regmap_unlock_mutex+0xe/0x10
+ cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
+ cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
+ cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
+
+When both bitoffset and otp_map[i].size are 0, the line 836 will
+result in GENMASK(-1, 0), this triggers the shift-out-of-bounds
+calltrace.
+
+Here add a checking, if both bitoffset and otp_map[i].size are 0,
+do not run GENMASK() and directly set otp_val to 0, this will not
+bring any function change on the driver but could avoid the calltrace.
+
+Signed-off-by: Hui Wang <hui.wang@canonical.com>
+Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/codecs/cs35l41-lib.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/codecs/cs35l41-lib.c b/sound/soc/codecs/cs35l41-lib.c
+index e5a56bcbb223..281a710a4123 100644
+--- a/sound/soc/codecs/cs35l41-lib.c
++++ b/sound/soc/codecs/cs35l41-lib.c
+@@ -831,12 +831,14 @@ int cs35l41_otp_unpack(struct device *dev, struct regmap *regmap)
+ GENMASK(bit_offset + otp_map[i].size - 33, 0)) <<
+ (32 - bit_offset);
+ bit_offset += otp_map[i].size - 32;
+- } else {
++ } else if (bit_offset + otp_map[i].size - 1 >= 0) {
+ otp_val = (otp_mem[word_offset] &
+ GENMASK(bit_offset + otp_map[i].size - 1, bit_offset)
+ ) >> bit_offset;
+ bit_offset += otp_map[i].size;
+- }
++ } else /* both bit_offset and otp_map[i].size are 0 */
++ otp_val = 0;
++
+ bit_sum += otp_map[i].size;
+
+ if (bit_offset == 32) {
+--
+2.35.1
+
--- /dev/null
+From ea4c73e6911dab12120afc3844e9c07491b052a5 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 6 Apr 2022 14:23:41 -0500
+Subject: ASoC: Intel: soc-acpi: correct device endpoints for max98373
+
+From: Chao Song <chao.song@linux.intel.com>
+
+[ Upstream commit 97326be14df7bacc6ba5c62c0556298c27ea0432 ]
+
+The left speaker of max98373 uses spk_r_endpoint, and right
+speaker uses spk_l_endpoint, this is obviously wrong.
+
+This patch corrects the endpoints for max98373 codec.
+
+Signed-off-by: Chao Song <chao.song@linux.intel.com>
+Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+index e2658bca6931..3137cea78d48 100644
+--- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
++++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+@@ -132,13 +132,13 @@ static const struct snd_soc_acpi_adr_device mx8373_1_adr[] = {
+ {
+ .adr = 0x000123019F837300ull,
+ .num_endpoints = 1,
+- .endpoints = &spk_l_endpoint,
++ .endpoints = &spk_r_endpoint,
+ .name_prefix = "Right"
+ },
+ {
+ .adr = 0x000127019F837300ull,
+ .num_endpoints = 1,
+- .endpoints = &spk_r_endpoint,
++ .endpoints = &spk_l_endpoint,
+ .name_prefix = "Left"
+ }
+ };
+--
+2.35.1
+
--- /dev/null
+From e16a23e5cb743697d0aa0277cea4ee52b2ef6ee2 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 7 Apr 2022 20:49:59 +0200
+Subject: ASoC: Intel: sof_es8336: Add a quirk for Huawei Matebook D15
+
+From: Mauro Carvalho Chehab <mchehab@kernel.org>
+
+[ Upstream commit c7cb4717f641db68e8117635bfcf62a9c27dc8d3 ]
+
+Based on experimental tests, Huawei Matebook D15 actually uses
+both gpio0 and gpio1: the first one controls the speaker, while
+the other one controls the headphone.
+
+Also, the headset is mapped as MIC1, instead of MIC2.
+
+So, add a quirk for it.
+
+Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
+Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.org
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/intel/boards/sof_es8336.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c
+index 28d7670b8f8f..b18951a8f309 100644
+--- a/sound/soc/intel/boards/sof_es8336.c
++++ b/sound/soc/intel/boards/sof_es8336.c
+@@ -252,6 +252,15 @@ static const struct dmi_system_id sof_es8336_quirk_table[] = {
+ SOF_ES8336_TGL_GPIO_QUIRK |
+ SOF_ES8336_ENABLE_DMIC)
+ },
++ {
++ .callback = sof_es8336_quirk_cb,
++ .matches = {
++ DMI_MATCH(DMI_SYS_VENDOR, "HUAWEI"),
++ DMI_MATCH(DMI_BOARD_NAME, "BOHB-WAX9-PCB-B2"),
++ },
++ .driver_data = (void *)(SOF_ES8336_HEADPHONE_GPIO |
++ SOC_ES8336_HEADSET_MIC1)
++ },
+ {}
+ };
+
+--
+2.35.1
+
--- /dev/null
+From a15cd2830f42c0bba97e301513c8c8ae10dd8613 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 6 Apr 2022 14:20:05 -0500
+Subject: ASoC: rt711/5682: check if bus is active before deferred jack
+ detection
+
+From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+
+[ Upstream commit 770f3d992a3f7330f801dfeee98429b2885c9fdb ]
+
+This patch takes a defensive programming and paranoid approach in case
+the parent device (SoundWire) is pm_runtime resumed but the rt711
+device is not. In that case, during the attachment and initialization,
+a jack detection workqueue can be scheduled. Since the pm_runtime
+suspend routines will not be invoked, the sequence to cancel all
+deferred work is not executed, and the jack detection could happen
+after the bus stops operating, leading to a timeout.
+
+This patch applies the same solution to rt5682, based on the
+similarities between codec drivers. The race condition with rt5682 was
+not detected experimentally though.
+
+BugLink: https://github.com/thesofproject/linux/issues/3459
+Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Reviewed-by: Rander Wang <rander.wang@intel.com>
+Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
+Link: https://lore.kernel.org/r/20220406192005.262996-1-pierre-louis.bossart@linux.intel.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/codecs/rt5682.c | 9 +++++++++
+ sound/soc/codecs/rt711.c | 7 +++++++
+ 2 files changed, 16 insertions(+)
+
+diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
+index c9ff9c89adf7..2b6c6d6b9771 100644
+--- a/sound/soc/codecs/rt5682.c
++++ b/sound/soc/codecs/rt5682.c
+@@ -1100,6 +1100,15 @@ void rt5682_jack_detect_handler(struct work_struct *work)
+ return;
+ }
+
++ if (rt5682->is_sdw) {
++ if (pm_runtime_status_suspended(rt5682->slave->dev.parent)) {
++ dev_dbg(&rt5682->slave->dev,
++ "%s: parent device is pm_runtime_status_suspended, skipping jack detection\n",
++ __func__);
++ return;
++ }
++ }
++
+ dapm = snd_soc_component_get_dapm(rt5682->component);
+
+ snd_soc_dapm_mutex_lock(dapm);
+diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c
+index 6770825d037a..ea25fd58d43a 100644
+--- a/sound/soc/codecs/rt711.c
++++ b/sound/soc/codecs/rt711.c
+@@ -245,6 +245,13 @@ static void rt711_jack_detect_handler(struct work_struct *work)
+ if (!rt711->component->card->instantiated)
+ return;
+
++ if (pm_runtime_status_suspended(rt711->slave->dev.parent)) {
++ dev_dbg(&rt711->slave->dev,
++ "%s: parent device is pm_runtime_status_suspended, skipping jack detection\n",
++ __func__);
++ return;
++ }
++
+ reg = RT711_VERB_GET_PIN_SENSE | RT711_HP_OUT;
+ ret = regmap_read(rt711->regmap, reg, &jack_status);
+ if (ret < 0)
+--
+2.35.1
+
--- /dev/null
+From 7dff9eca5da5f45bfdf20cca41a4ccc74daa88ff Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 31 Mar 2022 22:19:44 +0200
+Subject: ASoC: soc-pcm: use GFP_KERNEL when the code is sleepable
+
+From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
+
+[ Upstream commit fb6d679fee95d272c0a94912c4e534146823ee89 ]
+
+At the kzalloc() call in dpcm_be_connect(), there is no spin lock involved.
+It's merely protected by card->pcm_mutex, instead. The spinlock is applied
+at the later call with snd_soc_pcm_stream_lock_irq() only for the list
+manipulations. (See it's *_irq(), not *_irqsave(); that means the context
+being sleepable at that point.) So, we can use GFP_KERNEL safely there.
+
+This patch revert commit d8a9c6e1f676 ("ASoC: soc-pcm: use GFP_ATOMIC for
+dpcm structure") which is no longer needed since commit b7898396f4bb
+("ASoC: soc-pcm: Fix and cleanup DPCM locking").
+
+Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
+Link: https://lore.kernel.org/r/e740f1930843060e025e3c0f17ec1393cfdafb26.1648757961.git.christophe.jaillet@wanadoo.fr
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/soc-pcm.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
+index 9a954680d492..11c9853e9e80 100644
+--- a/sound/soc/soc-pcm.c
++++ b/sound/soc/soc-pcm.c
+@@ -1214,7 +1214,7 @@ static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
+ be_substream->pcm->nonatomic = 1;
+ }
+
+- dpcm = kzalloc(sizeof(struct snd_soc_dpcm), GFP_ATOMIC);
++ dpcm = kzalloc(sizeof(struct snd_soc_dpcm), GFP_KERNEL);
+ if (!dpcm)
+ return -ENOMEM;
+
+--
+2.35.1
+
--- /dev/null
+From a6481f7ce902e13e3dcd911dabfc18b75da58938 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 5 Apr 2022 20:10:38 +0800
+Subject: ASoC: wm8731: Disable the regulator when probing fails
+
+From: Zheyu Ma <zheyuma97@gmail.com>
+
+[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]
+
+When the driver fails during probing, the driver should disable the
+regulator, not just handle it in wm8731_hw_init().
+
+The following log reveals it:
+
+[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
+[ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
+[ 17.824467] Call Trace:
+[ 17.824774] <TASK>
+[ 17.825040] regulator_bulk_free+0x82/0xe0
+[ 17.825514] devres_release_group+0x319/0x3d0
+[ 17.825882] i2c_device_probe+0x766/0x940
+[ 17.829198] i2c_register_driver+0xb5/0x130
+
+Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
+Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/codecs/wm8731.c | 19 +++++++++++--------
+ 1 file changed, 11 insertions(+), 8 deletions(-)
+
+diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
+index 86b1f6eaa599..518167d90b10 100644
+--- a/sound/soc/codecs/wm8731.c
++++ b/sound/soc/codecs/wm8731.c
+@@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+ ret = wm8731_reset(wm8731->regmap);
+ if (ret < 0) {
+ dev_err(dev, "Failed to issue reset: %d\n", ret);
+- goto err_regulator_enable;
++ goto err;
+ }
+
+ /* Clear POWEROFF, keep everything else disabled */
+@@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+
+ regcache_mark_dirty(wm8731->regmap);
+
+-err_regulator_enable:
+- /* Regulators will be enabled by bias management */
+- regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+-
++err:
+ return ret;
+ }
+
+@@ -760,21 +757,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
+ ret = PTR_ERR(wm8731->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+- return ret;
++ goto err_regulator_enable;
+ }
+
+ ret = wm8731_hw_init(&i2c->dev, wm8731);
+ if (ret != 0)
+- return ret;
++ goto err_regulator_enable;
+
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm8731, &wm8731_dai, 1);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
+- return ret;
++ goto err_regulator_enable;
+ }
+
+ return 0;
++
++err_regulator_enable:
++ /* Regulators will be enabled by bias management */
++ regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
++
++ return ret;
+ }
+
+ static int wm8731_i2c_remove(struct i2c_client *client)
+--
+2.35.1
+
--- /dev/null
+From dca0705ae6c2009f09bdfc366b720a30b71f0958 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 22 Apr 2022 12:58:16 -0700
+Subject: Bluetooth: hci_event: Fix checking for invalid handle on error status
+
+From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
+
+[ Upstream commit c86cc5a3ec70f5644f1fa21610b943d0441bc1f7 ]
+
+Commit d5ebaa7c5f6f6 introduces checks for handle range
+(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
+to respect the valid range int case of error status:
+
+> HCI Event: Connect Complete (0x03) plen 11
+ Status: Page Timeout (0x04)
+ Handle: 65535
+ Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
+ Sound Products Inc)
+ Link type: ACL (0x01)
+ Encryption: Disabled (0x00)
+[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle
+
+Because of it is impossible to cleanup the connections properly since
+the stack would attempt to cancel the connection which is no longer in
+progress causing the following trace:
+
+< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
+ Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
+ Sound Products Inc)
+= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
+ gateway SDP record: Connection timed out
+> HCI Event: Command Complete (0x0e) plen 10
+ Create Connection Cancel (0x01|0x0008) ncmd 1
+ Status: Unknown Connection Identifier (0x02)
+ Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
+ Sound Products Inc)
+< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
+ Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
+ Sound Products Inc)
+
+Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events")
+Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
+Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/net/bluetooth/hci.h | 1 +
+ net/bluetooth/hci_event.c | 65 ++++++++++++++++++++-----------------
+ 2 files changed, 37 insertions(+), 29 deletions(-)
+
+diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
+index 5cb095b09a94..69ef31cea582 100644
+--- a/include/net/bluetooth/hci.h
++++ b/include/net/bluetooth/hci.h
+@@ -578,6 +578,7 @@ enum {
+ #define HCI_ERROR_CONNECTION_TIMEOUT 0x08
+ #define HCI_ERROR_REJ_LIMITED_RESOURCES 0x0d
+ #define HCI_ERROR_REJ_BAD_ADDR 0x0f
++#define HCI_ERROR_INVALID_PARAMETERS 0x12
+ #define HCI_ERROR_REMOTE_USER_TERM 0x13
+ #define HCI_ERROR_REMOTE_LOW_RESOURCES 0x14
+ #define HCI_ERROR_REMOTE_POWER_OFF 0x15
+diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
+index d984777c9b58..33a1b4115194 100644
+--- a/net/bluetooth/hci_event.c
++++ b/net/bluetooth/hci_event.c
+@@ -3067,13 +3067,9 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
+ {
+ struct hci_ev_conn_complete *ev = data;
+ struct hci_conn *conn;
++ u8 status = ev->status;
+
+- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) {
+- bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for invalid handle");
+- return;
+- }
+-
+- bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
++ bt_dev_dbg(hdev, "status 0x%2.2x", status);
+
+ hci_dev_lock(hdev);
+
+@@ -3122,8 +3118,14 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
+ goto unlock;
+ }
+
+- if (!ev->status) {
++ if (!status) {
+ conn->handle = __le16_to_cpu(ev->handle);
++ if (conn->handle > HCI_CONN_HANDLE_MAX) {
++ bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
++ conn->handle, HCI_CONN_HANDLE_MAX);
++ status = HCI_ERROR_INVALID_PARAMETERS;
++ goto done;
++ }
+
+ if (conn->type == ACL_LINK) {
+ conn->state = BT_CONFIG;
+@@ -3164,18 +3166,18 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
+ hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp),
+ &cp);
+ }
+- } else {
+- conn->state = BT_CLOSED;
+- if (conn->type == ACL_LINK)
+- mgmt_connect_failed(hdev, &conn->dst, conn->type,
+- conn->dst_type, ev->status);
+ }
+
+ if (conn->type == ACL_LINK)
+ hci_sco_setup(conn, ev->status);
+
+- if (ev->status) {
+- hci_connect_cfm(conn, ev->status);
++done:
++ if (status) {
++ conn->state = BT_CLOSED;
++ if (conn->type == ACL_LINK)
++ mgmt_connect_failed(hdev, &conn->dst, conn->type,
++ conn->dst_type, status);
++ hci_connect_cfm(conn, status);
+ hci_conn_del(conn);
+ } else if (ev->link_type == SCO_LINK) {
+ switch (conn->setting & SCO_AIRMODE_MASK) {
+@@ -3185,7 +3187,7 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
+ break;
+ }
+
+- hci_connect_cfm(conn, ev->status);
++ hci_connect_cfm(conn, status);
+ }
+
+ unlock:
+@@ -4676,6 +4678,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
+ {
+ struct hci_ev_sync_conn_complete *ev = data;
+ struct hci_conn *conn;
++ u8 status = ev->status;
+
+ switch (ev->link_type) {
+ case SCO_LINK:
+@@ -4690,12 +4693,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
+ return;
+ }
+
+- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) {
+- bt_dev_err(hdev, "Ignoring HCI_Sync_Conn_Complete for invalid handle");
+- return;
+- }
+-
+- bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
++ bt_dev_dbg(hdev, "status 0x%2.2x", status);
+
+ hci_dev_lock(hdev);
+
+@@ -4729,9 +4727,17 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
+ goto unlock;
+ }
+
+- switch (ev->status) {
++ switch (status) {
+ case 0x00:
+ conn->handle = __le16_to_cpu(ev->handle);
++ if (conn->handle > HCI_CONN_HANDLE_MAX) {
++ bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
++ conn->handle, HCI_CONN_HANDLE_MAX);
++ status = HCI_ERROR_INVALID_PARAMETERS;
++ conn->state = BT_CLOSED;
++ break;
++ }
++
+ conn->state = BT_CONNECTED;
+ conn->type = ev->link_type;
+
+@@ -4775,8 +4781,8 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
+ }
+ }
+
+- hci_connect_cfm(conn, ev->status);
+- if (ev->status)
++ hci_connect_cfm(conn, status);
++ if (status)
+ hci_conn_del(conn);
+
+ unlock:
+@@ -5527,11 +5533,6 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
+ struct smp_irk *irk;
+ u8 addr_type;
+
+- if (handle > HCI_CONN_HANDLE_MAX) {
+- bt_dev_err(hdev, "Ignoring HCI_LE_Connection_Complete for invalid handle");
+- return;
+- }
+-
+ hci_dev_lock(hdev);
+
+ /* All controllers implicitly stop advertising in the event of a
+@@ -5603,6 +5604,12 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
+
+ conn->dst_type = ev_bdaddr_type(hdev, conn->dst_type, NULL);
+
++ if (handle > HCI_CONN_HANDLE_MAX) {
++ bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x", handle,
++ HCI_CONN_HANDLE_MAX);
++ status = HCI_ERROR_INVALID_PARAMETERS;
++ }
++
+ if (status) {
+ hci_le_conn_failed(conn, status);
+ goto unlock;
+--
+2.35.1
+
--- /dev/null
+From 6f98a79efb649b9cf280d27ea477324306250c3e Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 26 Apr 2022 08:39:13 -0700
+Subject: bnx2x: fix napi API usage sequence
+
+From: Manish Chopra <manishc@marvell.com>
+
+[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ]
+
+While handling PCI errors (AER flow) driver tries to
+disable NAPI [napi_disable()] after NAPI is deleted
+[__netif_napi_del()] which causes unexpected system
+hang/crash.
+
+System message log shows the following:
+=======================================
+[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
+[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
+[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
+bnx2x->error_detected(IO frozen)
+[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
+'need reset'
+[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
+bnx2x->error_detected(IO frozen)
+[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
+'need reset'
+[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
+[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
+[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
+[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
+[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
+[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
+[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
+bnx2x->slot_reset()
+[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
+[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
+--> driver unload
+
+Uninterruptible tasks
+=====================
+crash> ps | grep UN
+ 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd]
+ 215 2 0 c000000004c80000 UN 0.0 0 0
+[kworker/0:2]
+ 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd
+ 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty
+ 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty
+ 32423 2 26 c00000020038c580 UN 0.0 0 0
+[kworker/26:3]
+ 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd
+ 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail
+ 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail
+ 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup
+ 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd
+ 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail
+ 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd
+
+EEH handler hung while bnx2x sleeping and holding RTNL lock
+===========================================================
+crash> bt 213
+PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd"
+ #0 [c000000004d477e0] __schedule at c000000000c70808
+ #1 [c000000004d478b0] schedule at c000000000c70ee0
+ #2 [c000000004d478e0] schedule_timeout at c000000000c76dec
+ #3 [c000000004d479c0] msleep at c0000000002120cc
+ #4 [c000000004d479f0] napi_disable at c000000000a06448
+ ^^^^^^^^^^^^^^^^
+ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
+ #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
+ #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
+ #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
+ #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64
+
+And the sleeping source code
+============================
+crash> dis -ls c000000000a06448
+FILE: ../net/core/dev.c
+LINE: 6702
+
+ 6697 {
+ 6698 might_sleep();
+ 6699 set_bit(NAPI_STATE_DISABLE, &n->state);
+ 6700
+ 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
+* 6702 msleep(1);
+ 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
+ 6704 msleep(1);
+ 6705
+ 6706 hrtimer_cancel(&n->timer);
+ 6707
+ 6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
+ 6709 }
+
+EEH calls into bnx2x twice based on the system log above, first through
+bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
+the following call chains:
+
+bnx2x_io_error_detected()
+ +-> bnx2x_eeh_nic_unload()
+ +-> bnx2x_del_all_napi()
+ +-> __netif_napi_del()
+
+bnx2x_io_slot_reset()
+ +-> bnx2x_netif_stop()
+ +-> bnx2x_napi_disable()
+ +->napi_disable()
+
+Fix this by correcting the sequence of NAPI APIs usage,
+that is delete the NAPI after disabling it.
+
+Fixes: 7fa6f34081f1 ("bnx2x: AER revised")
+Reported-by: David Christensen <drc@linux.vnet.ibm.com>
+Tested-by: David Christensen <drc@linux.vnet.ibm.com>
+Signed-off-by: Manish Chopra <manishc@marvell.com>
+Signed-off-by: Ariel Elior <aelior@marvell.com>
+Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++----
+ 1 file changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+index c19b072f3a23..962253db25b8 100644
+--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
++++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+@@ -14153,10 +14153,6 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
+
+ /* Stop Tx */
+ bnx2x_tx_disable(bp);
+- /* Delete all NAPI objects */
+- bnx2x_del_all_napi(bp);
+- if (CNIC_LOADED(bp))
+- bnx2x_del_all_napi_cnic(bp);
+ netdev_reset_tc(bp->dev);
+
+ del_timer_sync(&bp->timer);
+@@ -14261,6 +14257,11 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
+ bnx2x_drain_tx_queues(bp);
+ bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
+ bnx2x_netif_stop(bp, 1);
++ bnx2x_del_all_napi(bp);
++
++ if (CNIC_LOADED(bp))
++ bnx2x_del_all_napi_cnic(bp);
++
+ bnx2x_free_irq(bp);
+
+ /* Report UNLOAD_DONE to MCP */
+--
+2.35.1
+
--- /dev/null
+From e35196ac0bc0016b8de42637fbe25aefe0e7bad1 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 16 Apr 2022 16:44:10 +0530
+Subject: bonding: do not discard lowest hash bit for non layer3+4 hashing
+
+From: suresh kumar <suresh2514@gmail.com>
+
+[ Upstream commit 49aefd131739df552f83c566d0665744c30b1d70 ]
+
+Commit b5f862180d70 was introduced to discard lowest hash bit for layer3+4 hashing
+but it also removes last bit from non layer3+4 hashing
+
+Below script shows layer2+3 hashing will result in same slave to be used with above commit.
+$ cat hash.py
+#/usr/bin/python3.6
+
+h_dests=[0xa0, 0xa1]
+h_source=0xe3
+hproto=0x8
+saddr=0x1e7aa8c0
+daddr=0x17aa8c0
+
+for h_dest in h_dests:
+ hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
+ hash ^= hash >> 16
+ hash ^= hash >> 8
+ print(hash)
+
+print("with last bit removed")
+for h_dest in h_dests:
+ hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
+ hash ^= hash >> 16
+ hash ^= hash >> 8
+ hash = hash >> 1
+ print(hash)
+
+Output:
+$ python3.6 hash.py
+522133332
+522133333 <-------------- will result in both slaves being used
+
+with last bit removed
+261066666
+261066666 <-------------- only single slave used
+
+Signed-off-by: suresh kumar <suresh2514@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/bonding/bond_main.c | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
+index aebeb46e6fa6..c9107a8b4b90 100644
+--- a/drivers/net/bonding/bond_main.c
++++ b/drivers/net/bonding/bond_main.c
+@@ -3819,14 +3819,19 @@ static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb, const v
+ return true;
+ }
+
+-static u32 bond_ip_hash(u32 hash, struct flow_keys *flow)
++static u32 bond_ip_hash(u32 hash, struct flow_keys *flow, int xmit_policy)
+ {
+ hash ^= (__force u32)flow_get_u32_dst(flow) ^
+ (__force u32)flow_get_u32_src(flow);
+ hash ^= (hash >> 16);
+ hash ^= (hash >> 8);
++
+ /* discard lowest hash bit to deal with the common even ports pattern */
+- return hash >> 1;
++ if (xmit_policy == BOND_XMIT_POLICY_LAYER34 ||
++ xmit_policy == BOND_XMIT_POLICY_ENCAP34)
++ return hash >> 1;
++
++ return hash;
+ }
+
+ /* Generate hash based on xmit policy. If @skb is given it is used to linearize
+@@ -3856,7 +3861,7 @@ static u32 __bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, const voi
+ memcpy(&hash, &flow.ports.ports, sizeof(hash));
+ }
+
+- return bond_ip_hash(hash, &flow);
++ return bond_ip_hash(hash, &flow, bond->params.xmit_policy);
+ }
+
+ /**
+@@ -5051,7 +5056,7 @@ static u32 bond_sk_hash_l34(struct sock *sk)
+ /* L4 */
+ memcpy(&hash, &flow.ports.ports, sizeof(hash));
+ /* L3 */
+- return bond_ip_hash(hash, &flow);
++ return bond_ip_hash(hash, &flow, BOND_XMIT_POLICY_LAYER34);
+ }
+
+ static struct net_device *__bond_sk_get_lower_dev(struct bonding *bond,
+--
+2.35.1
+
--- /dev/null
+From 186caf7ddb2d510d63decdc1d67c43e12b2b1ee5 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 19:52:19 +0300
+Subject: bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit
+ lwt hook
+
+From: Eyal Birger <eyal.birger@gmail.com>
+
+[ Upstream commit b02d196c44ead1a5949729be9ff08fe781c3e48a ]
+
+xmit_check_hhlen() observes the dst for getting the device hard header
+length to make sure a modified packet can fit. When a helper which changes
+the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
+xmit program the accessed dst is no longer valid.
+
+This leads to the following splat:
+
+ BUG: kernel NULL pointer dereference, address: 00000000000000de
+ #PF: supervisor read access in kernel mode
+ #PF: error_code(0x0000) - not-present page
+ PGD 0 P4D 0
+ Oops: 0000 [#1] PREEMPT SMP PTI
+ CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
+ RIP: 0010:bpf_xmit+0xfb/0x17f
+ Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
+ RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282
+ RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000
+ RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff
+ RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff
+ R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000
+ R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000
+ FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000
+ CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
+ CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0
+ Call Trace:
+ <TASK>
+ lwtunnel_xmit.cold+0x71/0xc8
+ ip_finish_output2+0x279/0x520
+ ? __ip_finish_output.part.0+0x21/0x130
+
+Fix by fetching the device hard header length before running the BPF code.
+
+Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
+Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/core/lwt_bpf.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c
+index 349480ef68a5..8b6b5e72b217 100644
+--- a/net/core/lwt_bpf.c
++++ b/net/core/lwt_bpf.c
+@@ -159,10 +159,8 @@ static int bpf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
+ return dst->lwtstate->orig_output(net, sk, skb);
+ }
+
+-static int xmit_check_hhlen(struct sk_buff *skb)
++static int xmit_check_hhlen(struct sk_buff *skb, int hh_len)
+ {
+- int hh_len = skb_dst(skb)->dev->hard_header_len;
+-
+ if (skb_headroom(skb) < hh_len) {
+ int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));
+
+@@ -274,6 +272,7 @@ static int bpf_xmit(struct sk_buff *skb)
+
+ bpf = bpf_lwt_lwtunnel(dst->lwtstate);
+ if (bpf->xmit.prog) {
++ int hh_len = dst->dev->hard_header_len;
+ __be16 proto = skb->protocol;
+ int ret;
+
+@@ -291,7 +290,7 @@ static int bpf_xmit(struct sk_buff *skb)
+ /* If the header was expanded, headroom might be too
+ * small for L2 header to come, expand as needed.
+ */
+- ret = xmit_check_hhlen(skb);
++ ret = xmit_check_hhlen(skb, hh_len);
+ if (unlikely(ret))
+ return ret;
+
+--
+2.35.1
+
--- /dev/null
+From b2240109d03cd878dd247dad0ce7ab6e3cc3b0e9 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 16:35:49 +0200
+Subject: bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
+
+From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
+
+[ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ]
+
+This code is really spurious.
+It always returns an ERR_PTR, even when err is known to be 0 and calls
+put_device() after a successful device_register() call.
+
+It is likely that the return statement in the normal path is missing.
+Add 'return rdev;' to fix it.
+
+Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
+Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
+Reviewed-by: Samuel Holland <samuel@sholland.org>
+Tested-by: Samuel Holland <samuel@sholland.org>
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/bus/sunxi-rsb.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
+index 4566e730ef2b..60b082fe2ed0 100644
+--- a/drivers/bus/sunxi-rsb.c
++++ b/drivers/bus/sunxi-rsb.c
+@@ -227,6 +227,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
+
+ dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
+
++ return rdev;
++
+ err_device_add:
+ put_device(&rdev->dev);
+
+--
+2.35.1
+
--- /dev/null
+From 2121689e0ee62c0619a7926baef843bb11da9773 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 12 Apr 2022 12:26:51 +0300
+Subject: bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific
+
+From: Tony Lindgren <tony@atomide.com>
+
+[ Upstream commit a12315d6d27093392b6c634e1d35a59f1d1f7a59 ]
+
+On beagleboard revisions A to B4 we need to use gpt12 as the system timer.
+However, the quirk handling added for gpt12 caused a regression for system
+suspend for am335x as the PM coprocessor needs the timers idled for
+suspend.
+
+Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need
+it. Beagleboard revisions C and later no longer need to use the gpt12
+related quirk. Then at some point, if we decide to drop support for the old
+beagleboard revisions A to B4, we can also drop the gpt12 related quirks
+completely.
+
+Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
+Reported-by: Kevin Hilman <khilman@baylibre.com>
+Suggested-by: Kevin Hilman <khilman@baylibre.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/bus/ti-sysc.c | 16 +++++++++++++++-
+ 1 file changed, 15 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
+index 54c0ee6dda30..7a1b1f9e4933 100644
+--- a/drivers/bus/ti-sysc.c
++++ b/drivers/bus/ti-sysc.c
+@@ -3232,13 +3232,27 @@ static int sysc_check_disabled_devices(struct sysc *ddata)
+ */
+ static int sysc_check_active_timer(struct sysc *ddata)
+ {
++ int error;
++
+ if (ddata->cap->type != TI_SYSC_OMAP2_TIMER &&
+ ddata->cap->type != TI_SYSC_OMAP4_TIMER)
+ return 0;
+
++ /*
++ * Quirk for omap3 beagleboard revision A to B4 to use gpt12.
++ * Revision C and later are fixed with commit 23885389dbbb ("ARM:
++ * dts: Fix timer regression for beagleboard revision c"). This all
++ * can be dropped if we stop supporting old beagleboard revisions
++ * A to B4 at some point.
++ */
++ if (sysc_soc->soc == SOC_3430)
++ error = -ENXIO;
++ else
++ error = -EBUSY;
++
+ if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
+ (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
+- return -ENXIO;
++ return error;
+
+ return 0;
+ }
+--
+2.35.1
+
--- /dev/null
+From a53bec2c1be01e05b9e7a199f1a090672e549f85 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 11:15:36 +1000
+Subject: cifs: destage any unwritten data to the server before calling
+ copychunk_write
+
+From: Ronnie Sahlberg <lsahlber@redhat.com>
+
+[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]
+
+because the copychunk_write might cover a region of the file that has not yet
+been sent to the server and thus fail.
+
+A simple way to reproduce this is:
+truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile
+
+the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
+the 'fcollapse 16k 24k' due to write-back caching.
+
+fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
+and it will fail serverside since the file is still 0b in size serverside
+until the writes have been destaged.
+To avoid this we must ensure that we destage any unwritten data to the
+server before calling COPYCHUNK_WRITE.
+
+Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
+Reported-by: Xiaoli Feng <xifeng@redhat.com>
+Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/cifs/smb2ops.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
+index 5d120cd8bc78..13080d6a140b 100644
+--- a/fs/cifs/smb2ops.c
++++ b/fs/cifs/smb2ops.c
+@@ -1861,9 +1861,17 @@ smb2_copychunk_range(const unsigned int xid,
+ int chunks_copied = 0;
+ bool chunk_sizes_updated = false;
+ ssize_t bytes_written, total_bytes_written = 0;
++ struct inode *inode;
+
+ pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
+
++ /*
++ * We need to flush all unwritten data before we can send the
++ * copychunk ioctl to the server.
++ */
++ inode = d_inode(trgtfile->dentry);
++ filemap_write_and_wait(inode->i_mapping);
++
+ if (pcchunk == NULL)
+ return -ENOMEM;
+
+--
+2.35.1
+
--- /dev/null
+From 22041b2f379e5f53107586128186a0b48b222784 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 21:43:08 +0800
+Subject: clk: sunxi: sun9i-mmc: check return value after calling
+ platform_get_resource()
+
+From: Yang Yingliang <yangyingliang@huawei.com>
+
+[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ]
+
+It will cause null-ptr-deref if platform_get_resource() returns NULL,
+we need check the return value.
+
+Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
+Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
+Reviewed-by: Samuel Holland <samuel@sholland.org>
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/clk/sunxi/clk-sun9i-mmc.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c
+index 542b31d6e96d..636bcf2439ef 100644
+--- a/drivers/clk/sunxi/clk-sun9i-mmc.c
++++ b/drivers/clk/sunxi/clk-sun9i-mmc.c
+@@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev)
+ spin_lock_init(&data->lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!r)
++ return -EINVAL;
+ /* one clock/reset pair per word */
+ count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH);
+ data->membase = devm_ioremap_resource(&pdev->dev, r);
+--
+2.35.1
+
--- /dev/null
+From 91c4dbca7df8324672e7a207f1514bb8fd6f83e3 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 23 Apr 2022 15:12:04 +0000
+Subject: cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
+
+From: Xiaobing Luo <luoxiaobing0926@gmail.com>
+
+[ Upstream commit 1aa24a8f3b5133dae4bc1e57427e345445f3e902 ]
+
+--------------------------------------------
+unreferenced object 0xffff000010742a00 (size 128):
+ comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s)
+ hex dump (first 32 bytes):
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ backtrace:
+ [<00000000b4dfebaa>] __kmalloc+0x338/0x474
+ [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
+ [<000000007d6082a0>] platform_probe+0x98/0x11c
+ [<00000000c990f549>] really_probe+0x234/0x5a0
+ [<000000002d9fecc6>] __driver_probe_device+0x194/0x224
+ [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c
+ [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180
+ [<000000006720e418>] bus_for_each_drv+0xf8/0x160
+ [<00000000df4f14f6>] __device_attach+0x174/0x29c
+ [<00000000782002fb>] device_initial_probe+0x20/0x30
+ [<00000000c2681b06>] bus_probe_device+0xfc/0x110
+ [<00000000964cf3bd>] device_add+0x5f0/0xcd0
+ [<000000004b9264e3>] platform_device_add+0x198/0x390
+ [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210
+ [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
+ [<000000000377cc7c>] do_one_initcall+0xe4/0x570
+--------------------------------------------
+
+if sun50i_cpufreq_get_efuse failed, then opp_tables leak.
+
+Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
+Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
+Reviewed-by: Samuel Holland <samuel@sholland.org>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpufreq/sun50i-cpufreq-nvmem.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+index 2deed8d8773f..75e1bf3a08f7 100644
+--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
++++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+@@ -98,8 +98,10 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
+ return -ENOMEM;
+
+ ret = sun50i_cpufreq_get_efuse(&speed);
+- if (ret)
++ if (ret) {
++ kfree(opp_tables);
+ return ret;
++ }
+
+ snprintf(name, MAX_NAME_LEN, "speed%d", speed);
+
+--
+2.35.1
+
--- /dev/null
+From 3db687653c84046520899089876af06b3db2e98c Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 7 Apr 2022 23:09:19 +0300
+Subject: cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
+
+From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+[ Upstream commit e4e6448638a01905faeda9bf96aa9df7c8ef463c ]
+
+It's noted that dcvs interrupts are not self-clearing, thus an interrupt
+handler runs constantly, which leads to a severe regression in runtime.
+To fix the problem an explicit write to clear interrupt register is
+required, note that on OSM platforms the register may not be present.
+
+Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
+Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpufreq/qcom-cpufreq-hw.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
+index 1e99b71e7844..ca0f1be1c3b2 100644
+--- a/drivers/cpufreq/qcom-cpufreq-hw.c
++++ b/drivers/cpufreq/qcom-cpufreq-hw.c
+@@ -24,6 +24,8 @@
+ #define CLK_HW_DIV 2
+ #define LUT_TURBO_IND 1
+
++#define GT_IRQ_STATUS BIT(2)
++
+ #define HZ_PER_KHZ 1000
+
+ struct qcom_cpufreq_soc_data {
+@@ -31,6 +33,7 @@ struct qcom_cpufreq_soc_data {
+ u32 reg_domain_state;
+ u32 reg_freq_lut;
+ u32 reg_volt_lut;
++ u32 reg_intr_clr;
+ u32 reg_current_vote;
+ u32 reg_perf_state;
+ u8 lut_row_size;
+@@ -347,6 +350,10 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
+ disable_irq_nosync(c_data->throttle_irq);
+ schedule_delayed_work(&c_data->throttle_work, 0);
+
++ if (c_data->soc_data->reg_intr_clr)
++ writel_relaxed(GT_IRQ_STATUS,
++ c_data->base + c_data->soc_data->reg_intr_clr);
++
+ return IRQ_HANDLED;
+ }
+
+@@ -364,6 +371,7 @@ static const struct qcom_cpufreq_soc_data epss_soc_data = {
+ .reg_domain_state = 0x20,
+ .reg_freq_lut = 0x100,
+ .reg_volt_lut = 0x200,
++ .reg_intr_clr = 0x308,
+ .reg_perf_state = 0x320,
+ .lut_row_size = 4,
+ };
+--
+2.35.1
+
--- /dev/null
+From 84879a09efef0abcde8eedcf7cb5da672b1822e4 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 1 Apr 2022 10:14:24 +0300
+Subject: cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS
+ platforms
+
+From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+[ Upstream commit f84ccad5f5660f86a642a3d7e2bfdc4e7a8a2d49 ]
+
+On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is
+obtained from another register REG_DOMAIN_STATE, thus the helper function
+qcom_lmh_get_throttle_freq() should be modified accordingly, as for now
+it returns gibberish since .reg_current_vote is unset for EPSS hardware.
+
+To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate
+in KHz.
+
+Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpufreq/qcom-cpufreq-hw.c | 17 +++++++++++------
+ 1 file changed, 11 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
+index 60d38f62308a..1e99b71e7844 100644
+--- a/drivers/cpufreq/qcom-cpufreq-hw.c
++++ b/drivers/cpufreq/qcom-cpufreq-hw.c
+@@ -28,6 +28,7 @@
+
+ struct qcom_cpufreq_soc_data {
+ u32 reg_enable;
++ u32 reg_domain_state;
+ u32 reg_freq_lut;
+ u32 reg_volt_lut;
+ u32 reg_current_vote;
+@@ -267,11 +268,16 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
+ }
+ }
+
+-static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
++static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
+ {
+- unsigned int val = readl_relaxed(data->base + data->soc_data->reg_current_vote);
++ unsigned int lval;
+
+- return (val & 0x3FF) * 19200;
++ if (data->soc_data->reg_current_vote)
++ lval = readl_relaxed(data->base + data->soc_data->reg_current_vote) & 0x3ff;
++ else
++ lval = readl_relaxed(data->base + data->soc_data->reg_domain_state) & 0xff;
++
++ return lval * xo_rate;
+ }
+
+ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+@@ -281,14 +287,12 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+ struct device *dev = get_cpu_device(cpu);
+ unsigned long freq_hz, throttled_freq;
+ struct dev_pm_opp *opp;
+- unsigned int freq;
+
+ /*
+ * Get the h/w throttled frequency, normalize it using the
+ * registered opp table and use it to calculate thermal pressure.
+ */
+- freq = qcom_lmh_get_throttle_freq(data);
+- freq_hz = freq * HZ_PER_KHZ;
++ freq_hz = qcom_lmh_get_throttle_freq(data);
+
+ opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
+ if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+@@ -357,6 +361,7 @@ static const struct qcom_cpufreq_soc_data qcom_soc_data = {
+
+ static const struct qcom_cpufreq_soc_data epss_soc_data = {
+ .reg_enable = 0x0,
++ .reg_domain_state = 0x20,
+ .reg_freq_lut = 0x100,
+ .reg_volt_lut = 0x200,
+ .reg_perf_state = 0x320,
+--
+2.35.1
+
--- /dev/null
+From fe1aadd3b1e7ae80869e299fb0720028a385017d Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 26 Mar 2022 18:51:50 +0300
+Subject: cpufreq: qcom-hw: drop affinity hint before freeing the IRQ
+
+From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+[ Upstream commit be5985b3dbce5ba2af3c8b0f2b7df235c93907e6 ]
+
+Drop affinity hint before freeing the throttling IRQ to fix the
+following trace:
+
+[ 185.114773] ------------[ cut here ]------------
+[ 185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc
+[ 185.127474] Modules linked in:
+[ 185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S W 5.17.0-rc6-00386-g67382a5b705d-dirty #690
+[ 185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+[ 185.154269] pc : free_irq+0x3a4/0x3dc
+[ 185.158031] lr : free_irq+0x33c/0x3dc
+[ 185.161792] sp : ffff80000841bc90
+[ 185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908
+[ 185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0
+[ 185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000
+[ 185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff
+[ 185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7
+[ 185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040
+[ 185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408
+[ 185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4
+[ 185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108
+[ 185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000
+[ 185.238421] Call trace:
+[ 185.240932] free_irq+0x3a4/0x3dc
+[ 185.244334] qcom_cpufreq_hw_cpu_exit+0x78/0xcc
+[ 185.248985] cpufreq_offline.isra.0+0x228/0x270
+[ 185.253639] cpuhp_cpufreq_offline+0x10/0x20
+[ 185.258027] cpuhp_invoke_callback+0x16c/0x2b0
+[ 185.262592] cpuhp_thread_fun+0x190/0x250
+[ 185.266710] smpboot_thread_fn+0x12c/0x230
+[ 185.270914] kthread+0xfc/0x100
+[ 185.274145] ret_from_fork+0x10/0x20
+[ 185.277820] irq event stamp: 212
+[ 185.281136] hardirqs last enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0
+[ 185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10
+[ 185.299081] softirqs last enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14
+[ 185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0
+
+Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts")
+Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpufreq/qcom-cpufreq-hw.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
+index effbb680b453..740518d8ae16 100644
+--- a/drivers/cpufreq/qcom-cpufreq-hw.c
++++ b/drivers/cpufreq/qcom-cpufreq-hw.c
+@@ -412,6 +412,7 @@ static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data)
+ mutex_unlock(&data->throttle_lock);
+
+ cancel_delayed_work_sync(&data->throttle_work);
++ irq_set_affinity_hint(data->throttle_irq, NULL);
+ free_irq(data->throttle_irq, data);
+ }
+
+--
+2.35.1
+
--- /dev/null
+From 05def0d48374f70139b9c1a0a574aa10ee9d4256 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 26 Mar 2022 18:51:52 +0300
+Subject: cpufreq: qcom-hw: fix the opp entries refcounting
+
+From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+[ Upstream commit 6240aaad75e1a623872a830d13393d7aabf1052c ]
+
+The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for
+throttling, but will not put it, ending up with leaking a reference
+count and the following backtrace when putting the CPU offline.
+
+Correctly put the reference count of the returned opp instance.
+
+[ 84.418025] ------------[ cut here ]------------
+[ 84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190
+[ 84.431966] Modules linked in:
+[ 84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S 5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721
+[ 84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
+[ 84.458781] pc : _opp_table_kref_release+0x188/0x190
+[ 84.463878] lr : _opp_table_kref_release+0x78/0x190
+[ 84.468885] sp : ffff80000841bc70
+[ 84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908
+[ 84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0
+[ 84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80
+[ 84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff
+[ 84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448
+[ 84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000
+[ 84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000
+[ 84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001
+[ 84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00
+[ 84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0
+[ 84.545579] Call trace:
+[ 84.548101] _opp_table_kref_release+0x188/0x190
+[ 84.552842] dev_pm_opp_remove_all_dynamic+0x8c/0xc0
+[ 84.557949] qcom_cpufreq_hw_cpu_exit+0x30/0xdc
+[ 84.562608] cpufreq_offline.isra.0+0x1b4/0x1d8
+[ 84.567270] cpuhp_cpufreq_offline+0x10/0x6c
+[ 84.571663] cpuhp_invoke_callback+0x16c/0x2b0
+[ 84.576231] cpuhp_thread_fun+0x190/0x250
+[ 84.580353] smpboot_thread_fn+0x12c/0x230
+[ 84.584568] kthread+0xfc/0x100
+[ 84.587810] ret_from_fork+0x10/0x20
+[ 84.591490] irq event stamp: 3482
+[ 84.594901] hardirqs last enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c
+[ 84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c
+[ 84.611074] softirqs last enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588
+[ 84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174
+[ 84.627691] ---[ end trace 0000000000000000 ]---
+
+Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
+Reported-by: kernel test robot <lkp@intel.com>
+Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpufreq/qcom-cpufreq-hw.c | 14 ++++++++++----
+ 1 file changed, 10 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
+index dc0d5f84d863..60d38f62308a 100644
+--- a/drivers/cpufreq/qcom-cpufreq-hw.c
++++ b/drivers/cpufreq/qcom-cpufreq-hw.c
+@@ -292,12 +292,18 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+
+ opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
+ if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+- dev_pm_opp_find_freq_ceil(dev, &freq_hz);
++ opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);
+
+- throttled_freq = freq_hz / HZ_PER_KHZ;
++ if (IS_ERR(opp)) {
++ dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp);
++ } else {
++ throttled_freq = freq_hz / HZ_PER_KHZ;
++
++ /* Update thermal pressure (the boost frequencies are accepted) */
++ arch_update_thermal_pressure(policy->related_cpus, throttled_freq);
+
+- /* Update thermal pressure (the boost frequencies are accepted) */
+- arch_update_thermal_pressure(policy->related_cpus, throttled_freq);
++ dev_pm_opp_put(opp);
++ }
+
+ /*
+ * In the unlikely case policy is unregistered do not enable
+--
+2.35.1
+
--- /dev/null
+From 7669cd5a8197610898effd8e63a26cbba8ff999f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 26 Mar 2022 18:51:51 +0300
+Subject: cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
+
+From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+[ Upstream commit 5e4f009da6be563984ba4db4ef4f32529e9aeb90 ]
+
+The driver would disable the worker when cpu is being put offline, but
+it happens closer to the end of cpufreq_offline(). The function
+qcom_lmh_dcvs_poll() can be running in parallel with this, when
+policy->cpus already has been updated. Read policy->related_cpus
+instead.
+
+[ 37.122433] ------------[ cut here ]------------
+[ 37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100
+[ 37.138098] Modules linked in:
+[ 37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S 5.17.0-rc6-00389-g37c83d0b8710-dirty #713
+[ 37.158306] Workqueue: events qcom_lmh_dcvs_poll
+[ 37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+[ 37.170278] pc : topology_update_thermal_pressure+0xec/0x100
+[ 37.176131] lr : topology_update_thermal_pressure+0x20/0x100
+[ 37.181977] sp : ffff800009b6bce0
+[ 37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205
+[ 37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000
+[ 37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000
+[ 37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000
+[ 37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2
+[ 37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040
+[ 37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674
+[ 37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c
+[ 37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100
+[ 37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100
+[ 37.259235] Call trace:
+[ 37.261771] topology_update_thermal_pressure+0xec/0x100
+[ 37.267266] qcom_lmh_dcvs_poll+0xbc/0x154
+[ 37.271505] process_one_work+0x288/0x69c
+[ 37.275654] worker_thread+0x74/0x470
+[ 37.279450] kthread+0xfc/0x100
+[ 37.282712] ret_from_fork+0x10/0x20
+[ 37.286417] irq event stamp: 74
+[ 37.289664] hardirqs last enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80
+[ 37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10
+[ 37.306885] softirqs last enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588
+[ 37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174
+[ 37.323386] ---[ end trace 0000000000000000 ]---
+
+Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
+Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
+index 740518d8ae16..dc0d5f84d863 100644
+--- a/drivers/cpufreq/qcom-cpufreq-hw.c
++++ b/drivers/cpufreq/qcom-cpufreq-hw.c
+@@ -277,7 +277,7 @@ static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
+ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+ {
+ struct cpufreq_policy *policy = data->policy;
+- int cpu = cpumask_first(policy->cpus);
++ int cpu = cpumask_first(policy->related_cpus);
+ struct device *dev = get_cpu_device(cpu);
+ unsigned long freq_hz, throttled_freq;
+ struct dev_pm_opp *opp;
+--
+2.35.1
+
--- /dev/null
+From cc9fd5a173f3b83196bff54f9cc2072da4fd563d Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 17 Apr 2022 20:55:19 +0800
+Subject: drivers: net: hippi: Fix deadlock in rr_close()
+
+From: Duoming Zhou <duoming@zju.edu.cn>
+
+[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]
+
+There is a deadlock in rr_close(), which is shown below:
+
+ (Thread 1) | (Thread 2)
+ | rr_open()
+rr_close() | add_timer()
+ spin_lock_irqsave() //(1) | (wait a time)
+ ... | rr_timer()
+ del_timer_sync() | spin_lock_irqsave() //(2)
+ (wait timer to stop) | ...
+
+We hold rrpriv->lock in position (1) of thread 1 and
+use del_timer_sync() to wait timer to stop, but timer handler
+also need rrpriv->lock in position (2) of thread 2.
+As a result, rr_close() will block forever.
+
+This patch extracts del_timer_sync() from the protection of
+spin_lock_irqsave(), which could let timer handler to obtain
+the needed lock.
+
+Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
+Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/hippi/rrunner.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
+index 16105292b140..74e845fa2e07 100644
+--- a/drivers/net/hippi/rrunner.c
++++ b/drivers/net/hippi/rrunner.c
+@@ -1355,7 +1355,9 @@ static int rr_close(struct net_device *dev)
+
+ rrpriv->fw_running = 0;
+
++ spin_unlock_irqrestore(&rrpriv->lock, flags);
+ del_timer_sync(&rrpriv->timer);
++ spin_lock_irqsave(&rrpriv->lock, flags);
+
+ writel(0, ®s->TxPi);
+ writel(0, ®s->IpRxPi);
+--
+2.35.1
+
--- /dev/null
+From 540404867ba9c00dae31157d9afa0869f42a9022 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 17:03:09 +0800
+Subject: drm/amd/display: Fix memory leak in dcn21_clock_source_create
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit 65e54987508b6f0771f56bdfa3ee1926d52785ae ]
+
+When dcn20_clk_src_construct() fails, we need to release clk_src.
+
+Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+index ca1bbc942fd4..67f3cae553e0 100644
+--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
++++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+@@ -1427,6 +1427,7 @@ static struct clock_source *dcn21_clock_source_create(
+ return &clk_src->base;
+ }
+
++ kfree(clk_src);
+ BREAK_TO_DEBUGGER();
+ return NULL;
+ }
+--
+2.35.1
+
--- /dev/null
+From 55f15c3beeb9007e8b029fbcaf9dcb625912339a Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 18 Apr 2022 11:55:58 -0400
+Subject: drm/amdkfd: Fix GWS queue count
+
+From: David Yat Sin <david.yatsin@amd.com>
+
+[ Upstream commit 7c6b6e18c890f30965b0589b0a57645e1dbccfde ]
+
+dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
+each time the queue gets evicted.
+
+Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
+Signed-off-by: David Yat Sin <david.yatsin@amd.com>
+Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
+Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ .../drm/amd/amdkfd/kfd_device_queue_manager.c | 83 +++++++++----------
+ 1 file changed, 37 insertions(+), 46 deletions(-)
+
+diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+index 4b6814949aad..8d40b93747e0 100644
+--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
++++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+@@ -129,19 +129,33 @@ void program_sh_mem_settings(struct device_queue_manager *dqm,
+ }
+
+ static void increment_queue_count(struct device_queue_manager *dqm,
+- enum kfd_queue_type type)
++ struct qcm_process_device *qpd,
++ struct queue *q)
+ {
+ dqm->active_queue_count++;
+- if (type == KFD_QUEUE_TYPE_COMPUTE || type == KFD_QUEUE_TYPE_DIQ)
++ if (q->properties.type == KFD_QUEUE_TYPE_COMPUTE ||
++ q->properties.type == KFD_QUEUE_TYPE_DIQ)
+ dqm->active_cp_queue_count++;
++
++ if (q->properties.is_gws) {
++ dqm->gws_queue_count++;
++ qpd->mapped_gws_queue = true;
++ }
+ }
+
+ static void decrement_queue_count(struct device_queue_manager *dqm,
+- enum kfd_queue_type type)
++ struct qcm_process_device *qpd,
++ struct queue *q)
+ {
+ dqm->active_queue_count--;
+- if (type == KFD_QUEUE_TYPE_COMPUTE || type == KFD_QUEUE_TYPE_DIQ)
++ if (q->properties.type == KFD_QUEUE_TYPE_COMPUTE ||
++ q->properties.type == KFD_QUEUE_TYPE_DIQ)
+ dqm->active_cp_queue_count--;
++
++ if (q->properties.is_gws) {
++ dqm->gws_queue_count--;
++ qpd->mapped_gws_queue = false;
++ }
+ }
+
+ static int allocate_doorbell(struct qcm_process_device *qpd, struct queue *q)
+@@ -380,7 +394,7 @@ static int create_queue_nocpsch(struct device_queue_manager *dqm,
+ list_add(&q->list, &qpd->queues_list);
+ qpd->queue_count++;
+ if (q->properties.is_active)
+- increment_queue_count(dqm, q->properties.type);
++ increment_queue_count(dqm, qpd, q);
+
+ /*
+ * Unconditionally increment this counter, regardless of the queue's
+@@ -505,13 +519,8 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm,
+ deallocate_vmid(dqm, qpd, q);
+ }
+ qpd->queue_count--;
+- if (q->properties.is_active) {
+- decrement_queue_count(dqm, q->properties.type);
+- if (q->properties.is_gws) {
+- dqm->gws_queue_count--;
+- qpd->mapped_gws_queue = false;
+- }
+- }
++ if (q->properties.is_active)
++ decrement_queue_count(dqm, qpd, q);
+
+ return retval;
+ }
+@@ -604,12 +613,11 @@ static int update_queue(struct device_queue_manager *dqm, struct queue *q,
+ * dqm->active_queue_count to determine whether a new runlist must be
+ * uploaded.
+ */
+- if (q->properties.is_active && !prev_active)
+- increment_queue_count(dqm, q->properties.type);
+- else if (!q->properties.is_active && prev_active)
+- decrement_queue_count(dqm, q->properties.type);
+-
+- if (q->gws && !q->properties.is_gws) {
++ if (q->properties.is_active && !prev_active) {
++ increment_queue_count(dqm, &pdd->qpd, q);
++ } else if (!q->properties.is_active && prev_active) {
++ decrement_queue_count(dqm, &pdd->qpd, q);
++ } else if (q->gws && !q->properties.is_gws) {
+ if (q->properties.is_active) {
+ dqm->gws_queue_count++;
+ pdd->qpd.mapped_gws_queue = true;
+@@ -671,11 +679,7 @@ static int evict_process_queues_nocpsch(struct device_queue_manager *dqm,
+ mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
+ q->properties.type)];
+ q->properties.is_active = false;
+- decrement_queue_count(dqm, q->properties.type);
+- if (q->properties.is_gws) {
+- dqm->gws_queue_count--;
+- qpd->mapped_gws_queue = false;
+- }
++ decrement_queue_count(dqm, qpd, q);
+
+ if (WARN_ONCE(!dqm->sched_running, "Evict when stopped\n"))
+ continue;
+@@ -721,7 +725,7 @@ static int evict_process_queues_cpsch(struct device_queue_manager *dqm,
+ continue;
+
+ q->properties.is_active = false;
+- decrement_queue_count(dqm, q->properties.type);
++ decrement_queue_count(dqm, qpd, q);
+ }
+ pdd->last_evict_timestamp = get_jiffies_64();
+ retval = execute_queues_cpsch(dqm,
+@@ -792,11 +796,7 @@ static int restore_process_queues_nocpsch(struct device_queue_manager *dqm,
+ mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
+ q->properties.type)];
+ q->properties.is_active = true;
+- increment_queue_count(dqm, q->properties.type);
+- if (q->properties.is_gws) {
+- dqm->gws_queue_count++;
+- qpd->mapped_gws_queue = true;
+- }
++ increment_queue_count(dqm, qpd, q);
+
+ if (WARN_ONCE(!dqm->sched_running, "Restore when stopped\n"))
+ continue;
+@@ -854,7 +854,7 @@ static int restore_process_queues_cpsch(struct device_queue_manager *dqm,
+ continue;
+
+ q->properties.is_active = true;
+- increment_queue_count(dqm, q->properties.type);
++ increment_queue_count(dqm, &pdd->qpd, q);
+ }
+ retval = execute_queues_cpsch(dqm,
+ KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
+@@ -1260,7 +1260,7 @@ static int create_kernel_queue_cpsch(struct device_queue_manager *dqm,
+ dqm->total_queue_count);
+
+ list_add(&kq->list, &qpd->priv_queue_list);
+- increment_queue_count(dqm, kq->queue->properties.type);
++ increment_queue_count(dqm, qpd, kq->queue);
+ qpd->is_debug = true;
+ execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
+ dqm_unlock(dqm);
+@@ -1274,7 +1274,7 @@ static void destroy_kernel_queue_cpsch(struct device_queue_manager *dqm,
+ {
+ dqm_lock(dqm);
+ list_del(&kq->list);
+- decrement_queue_count(dqm, kq->queue->properties.type);
++ decrement_queue_count(dqm, qpd, kq->queue);
+ qpd->is_debug = false;
+ execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES, 0);
+ /*
+@@ -1341,7 +1341,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q,
+ qpd->queue_count++;
+
+ if (q->properties.is_active) {
+- increment_queue_count(dqm, q->properties.type);
++ increment_queue_count(dqm, qpd, q);
+
+ execute_queues_cpsch(dqm,
+ KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
+@@ -1558,15 +1558,11 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm,
+ list_del(&q->list);
+ qpd->queue_count--;
+ if (q->properties.is_active) {
+- decrement_queue_count(dqm, q->properties.type);
++ decrement_queue_count(dqm, qpd, q);
+ retval = execute_queues_cpsch(dqm,
+ KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
+ if (retval == -ETIME)
+ qpd->reset_wavefronts = true;
+- if (q->properties.is_gws) {
+- dqm->gws_queue_count--;
+- qpd->mapped_gws_queue = false;
+- }
+ }
+
+ /*
+@@ -1757,7 +1753,7 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
+ /* Clean all kernel queues */
+ list_for_each_entry_safe(kq, kq_next, &qpd->priv_queue_list, list) {
+ list_del(&kq->list);
+- decrement_queue_count(dqm, kq->queue->properties.type);
++ decrement_queue_count(dqm, qpd, kq->queue);
+ qpd->is_debug = false;
+ dqm->total_queue_count--;
+ filter = KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES;
+@@ -1770,13 +1766,8 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
+ else if (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)
+ deallocate_sdma_queue(dqm, q);
+
+- if (q->properties.is_active) {
+- decrement_queue_count(dqm, q->properties.type);
+- if (q->properties.is_gws) {
+- dqm->gws_queue_count--;
+- qpd->mapped_gws_queue = false;
+- }
+- }
++ if (q->properties.is_active)
++ decrement_queue_count(dqm, qpd, q);
+
+ dqm->total_queue_count--;
+ }
+--
+2.35.1
+
--- /dev/null
+From 2a5f5755a282efc51df1812983f196f7b6dc9c56 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 11:26:21 -0500
+Subject: drm/sun4i: Remove obsolete references to PHYS_OFFSET
+
+From: Samuel Holland <samuel@sholland.org>
+
+[ Upstream commit dc3ae06c5f2170d879ff58696f629d8c3868aec3 ]
+
+commit b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a
+central place") added a platform device notifier that sets the DMA
+offset for all of the display engine frontend and backend devices.
+
+The code applying the offset to DMA buffer physical addresses was then
+removed from the backend driver in commit 756668ba682e ("drm/sun4i:
+backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET
+was left in the frontend driver.
+
+As a result, the offset was applied twice in the frontend driver. This
+likely went unnoticed because it only affects specific configurations
+(scaling or certain pixel formats) where the frontend is used, on boards
+with both one of these older SoCs and more than 1 GB of DRAM.
+
+In addition, the references to PHYS_OFFSET prevent compiling the driver
+on architectures where PHYS_OFFSET is not defined.
+
+Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place")
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+Signed-off-by: Maxime Ripard <maxime@cerno.tech>
+Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/sun4i/sun4i_frontend.c | 3 ---
+ 1 file changed, 3 deletions(-)
+
+diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
+index 56ae38389db0..462fae73eae9 100644
+--- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
++++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
+@@ -222,13 +222,11 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
+
+ /* Set the physical address of the buffer in memory */
+ paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
+- paddr -= PHYS_OFFSET;
+ DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n", &paddr);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
+
+ if (fb->format->num_planes > 1) {
+ paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 2 : 1);
+- paddr -= PHYS_OFFSET;
+ DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n", &paddr);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG,
+ paddr);
+@@ -236,7 +234,6 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
+
+ if (fb->format->num_planes > 2) {
+ paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 1 : 2);
+- paddr -= PHYS_OFFSET;
+ DRM_DEBUG_DRIVER("Setting buffer #2 address to %pad\n", &paddr);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR2_REG,
+ paddr);
+--
+2.35.1
+
--- /dev/null
+From 04a8223dfd77e26ed78524ead224d83299bdc272 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 1 Apr 2022 19:55:27 +0800
+Subject: erofs: fix use-after-free of on-stack io[]
+
+From: Hongyu Jin <hongyu.jin@unisoc.com>
+
+[ Upstream commit 60b30050116c0351b90154044345c1b53ae1f323 ]
+
+The root cause is the race as follows:
+Thread #1 Thread #2(irq ctx)
+
+z_erofs_runqueue()
+ struct z_erofs_decompressqueue io_A[];
+ submit bio A
+ z_erofs_decompress_kickoff(,,1)
+ z_erofs_decompressqueue_endio(bio A)
+ z_erofs_decompress_kickoff(,,-1)
+ spin_lock_irqsave()
+ atomic_add_return()
+ io_wait_event() -> pending_bios is already 0
+ [end of function]
+ wake_up_locked(io_A[]) // crash
+
+Referenced backtrace in kernel 5.4:
+
+[ 10.129422] Unable to handle kernel paging request at virtual address eb0454a4
+[ 10.364157] CPU: 0 PID: 709 Comm: getprop Tainted: G WC O 5.4.147-ab09225 #1
+[ 11.556325] [<c01b33b8>] (__wake_up_common) from [<c01b3300>] (__wake_up_locked+0x40/0x48)
+[ 11.565487] [<c01b3300>] (__wake_up_locked) from [<c044c8d0>] (z_erofs_vle_unzip_kickoff+0x6c/0xc0)
+[ 11.575438] [<c044c8d0>] (z_erofs_vle_unzip_kickoff) from [<c044c854>] (z_erofs_vle_read_endio+0x16c/0x17c)
+[ 11.586082] [<c044c854>] (z_erofs_vle_read_endio) from [<c06a80e8>] (clone_endio+0xb4/0x1d0)
+[ 11.595428] [<c06a80e8>] (clone_endio) from [<c04a1280>] (blk_update_request+0x150/0x4dc)
+[ 11.604516] [<c04a1280>] (blk_update_request) from [<c06dea28>] (mmc_blk_cqe_complete_rq+0x144/0x15c)
+[ 11.614640] [<c06dea28>] (mmc_blk_cqe_complete_rq) from [<c04a5d90>] (blk_done_softirq+0xb0/0xcc)
+[ 11.624419] [<c04a5d90>] (blk_done_softirq) from [<c010242c>] (__do_softirq+0x184/0x56c)
+[ 11.633419] [<c010242c>] (__do_softirq) from [<c01051e8>] (irq_exit+0xd4/0x138)
+[ 11.641640] [<c01051e8>] (irq_exit) from [<c010c314>] (__handle_domain_irq+0x94/0xd0)
+[ 11.650381] [<c010c314>] (__handle_domain_irq) from [<c04fde70>] (gic_handle_irq+0x50/0xd4)
+[ 11.659641] [<c04fde70>] (gic_handle_irq) from [<c0101b70>] (__irq_svc+0x70/0xb0)
+
+Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
+Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
+Reviewed-by: Chao Yu <chao@kernel.org>
+Link: https://lore.kernel.org/r/20220401115527.4935-1-hongyu.jin.cn@gmail.com
+Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/erofs/zdata.c | 12 ++++--------
+ fs/erofs/zdata.h | 2 +-
+ 2 files changed, 5 insertions(+), 9 deletions(-)
+
+diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c
+index 423bc1a61da5..a1b48bcafe63 100644
+--- a/fs/erofs/zdata.c
++++ b/fs/erofs/zdata.c
+@@ -1073,12 +1073,9 @@ static void z_erofs_decompress_kickoff(struct z_erofs_decompressqueue *io,
+
+ /* wake up the caller thread for sync decompression */
+ if (sync) {
+- unsigned long flags;
+-
+- spin_lock_irqsave(&io->u.wait.lock, flags);
+ if (!atomic_add_return(bios, &io->pending_bios))
+- wake_up_locked(&io->u.wait);
+- spin_unlock_irqrestore(&io->u.wait.lock, flags);
++ complete(&io->u.done);
++
+ return;
+ }
+
+@@ -1224,7 +1221,7 @@ jobqueue_init(struct super_block *sb,
+ } else {
+ fg_out:
+ q = fgq;
+- init_waitqueue_head(&fgq->u.wait);
++ init_completion(&fgq->u.done);
+ atomic_set(&fgq->pending_bios, 0);
+ }
+ q->sb = sb;
+@@ -1428,8 +1425,7 @@ static void z_erofs_runqueue(struct super_block *sb,
+ return;
+
+ /* wait until all bios are completed */
+- io_wait_event(io[JQ_SUBMIT].u.wait,
+- !atomic_read(&io[JQ_SUBMIT].pending_bios));
++ wait_for_completion_io(&io[JQ_SUBMIT].u.done);
+
+ /* handle synchronous decompress queue in the caller context */
+ z_erofs_decompress_queue(&io[JQ_SUBMIT], pagepool);
+diff --git a/fs/erofs/zdata.h b/fs/erofs/zdata.h
+index e043216b545f..800b11c53f57 100644
+--- a/fs/erofs/zdata.h
++++ b/fs/erofs/zdata.h
+@@ -97,7 +97,7 @@ struct z_erofs_decompressqueue {
+ z_erofs_next_pcluster_t head;
+
+ union {
+- wait_queue_head_t wait;
++ struct completion done;
+ struct work_struct work;
+ } u;
+ };
+--
+2.35.1
+
--- /dev/null
+From 02bd5bb75f2f83001c2157ceb64eb0cffb73f0fc Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 22 Mar 2022 09:24:19 +0800
+Subject: ext4: fix bug_on in start_this_handle during umount filesystem
+
+From: Ye Bin <yebin10@huawei.com>
+
+[ Upstream commit b98535d091795a79336f520b0708457aacf55c67 ]
+
+We got issue as follows:
+------------[ cut here ]------------
+kernel BUG at fs/jbd2/transaction.c:389!
+invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
+CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
+Workqueue: events flush_stashed_error_work
+RIP: 0010:start_this_handle+0x41c/0x1160
+RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
+RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
+RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
+RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
+R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
+R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
+FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
+CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
+CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
+DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
+Call Trace:
+ <TASK>
+ jbd2__journal_start+0x38a/0x790
+ jbd2_journal_start+0x19/0x20
+ flush_stashed_error_work+0x110/0x2b3
+ process_one_work+0x688/0x1080
+ worker_thread+0x8b/0xc50
+ kthread+0x26f/0x310
+ ret_from_fork+0x22/0x30
+ </TASK>
+Modules linked in:
+---[ end trace 0000000000000000 ]---
+
+Above issue may happen as follows:
+ umount read procfs error_work
+ext4_put_super
+ flush_work(&sbi->s_error_work);
+
+ ext4_mb_seq_groups_show
+ ext4_mb_load_buddy_gfp
+ ext4_mb_init_group
+ ext4_mb_init_cache
+ ext4_read_block_bitmap_nowait
+ ext4_validate_block_bitmap
+ ext4_error
+ ext4_handle_error
+ schedule_work(&EXT4_SB(sb)->s_error_work);
+
+ ext4_unregister_sysfs(sb);
+ jbd2_journal_destroy(sbi->s_journal);
+ journal_kill_thread
+ journal->j_flags |= JBD2_UNMOUNT;
+
+ flush_stashed_error_work
+ jbd2_journal_start
+ start_this_handle
+ BUG_ON(journal->j_flags & JBD2_UNMOUNT);
+
+To solve this issue, we call 'ext4_unregister_sysfs() before flushing
+s_error_work in ext4_put_super().
+
+Signed-off-by: Ye Bin <yebin10@huawei.com>
+Reviewed-by: Jan Kara <jack@suse.cz>
+Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
+Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com
+Signed-off-by: Theodore Ts'o <tytso@mit.edu>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/ext4/super.c | 19 ++++++++++++-------
+ 1 file changed, 12 insertions(+), 7 deletions(-)
+
+diff --git a/fs/ext4/super.c b/fs/ext4/super.c
+index ba6530c2d271..fe30f483c59f 100644
+--- a/fs/ext4/super.c
++++ b/fs/ext4/super.c
+@@ -1199,20 +1199,25 @@ static void ext4_put_super(struct super_block *sb)
+ int aborted = 0;
+ int i, err;
+
+- ext4_unregister_li_request(sb);
+- ext4_quota_off_umount(sb);
+-
+- flush_work(&sbi->s_error_work);
+- destroy_workqueue(sbi->rsv_conversion_wq);
+- ext4_release_orphan_info(sb);
+-
+ /*
+ * Unregister sysfs before destroying jbd2 journal.
+ * Since we could still access attr_journal_task attribute via sysfs
+ * path which could have sbi->s_journal->j_task as NULL
++ * Unregister sysfs before flush sbi->s_error_work.
++ * Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
++ * read metadata verify failed then will queue error work.
++ * flush_stashed_error_work will call start_this_handle may trigger
++ * BUG_ON.
+ */
+ ext4_unregister_sysfs(sb);
+
++ ext4_unregister_li_request(sb);
++ ext4_quota_off_umount(sb);
++
++ flush_work(&sbi->s_error_work);
++ destroy_workqueue(sbi->rsv_conversion_wq);
++ ext4_release_orphan_info(sb);
++
+ if (sbi->s_journal) {
+ aborted = is_journal_aborted(sbi->s_journal);
+ err = jbd2_journal_destroy(sbi->s_journal);
+--
+2.35.1
+
--- /dev/null
+From 397fbcbce223d73d72137994deed8f1a936d960f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 24 Mar 2022 23:13:26 +0100
+Subject: gfs2: Make sure not to return short direct writes
+
+From: Andreas Gruenbacher <agruenba@redhat.com>
+
+[ Upstream commit 3bde4c48586074202044456285a97ccdf9048988 ]
+
+When direct writes fail with -ENOTBLK because we're writing into a
+hole (gfs2_iomap_begin()) or because of a page invalidation failure
+(iomap_dio_rw()), we're falling back to buffered writes. In that case,
+when we lose the inode glock in gfs2_file_buffered_write(), we want to
+re-acquire it instead of returning a short write.
+
+Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/gfs2/file.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
+index de0122806fb3..fdc7eda0437a 100644
+--- a/fs/gfs2/file.c
++++ b/fs/gfs2/file.c
+@@ -1069,7 +1069,7 @@ static ssize_t gfs2_file_buffered_write(struct kiocb *iocb,
+ from->count = min(from->count, window_size - leftover);
+ if (gfs2_holder_queued(gh))
+ goto retry_under_glock;
+- if (read)
++ if (read && !(iocb->ki_flags & IOCB_DIRECT))
+ goto out_uninit;
+ goto retry;
+ }
+--
+2.35.1
+
--- /dev/null
+From dd59c1bbf32fd9db3880f085104e806ef9d94f56 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 17 Mar 2022 14:20:38 +0100
+Subject: gfs2: Minor retry logic cleanup
+
+From: Andreas Gruenbacher <agruenba@redhat.com>
+
+[ Upstream commit 124c458a401a2497f796e4f2d6cafac6edbea8e9 ]
+
+Clean up the retry logic in the read and write functions somewhat.
+
+Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/gfs2/file.c | 34 ++++++++++++++++------------------
+ 1 file changed, 16 insertions(+), 18 deletions(-)
+
+diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
+index b53ad18e5ccb..de0122806fb3 100644
+--- a/fs/gfs2/file.c
++++ b/fs/gfs2/file.c
+@@ -851,9 +851,9 @@ static ssize_t gfs2_file_direct_read(struct kiocb *iocb, struct iov_iter *to,
+ leftover = fault_in_iov_iter_writeable(to, window_size);
+ gfs2_holder_disallow_demote(gh);
+ if (leftover != window_size) {
+- if (!gfs2_holder_queued(gh))
+- goto retry;
+- goto retry_under_glock;
++ if (gfs2_holder_queued(gh))
++ goto retry_under_glock;
++ goto retry;
+ }
+ }
+ if (gfs2_holder_queued(gh))
+@@ -920,9 +920,9 @@ static ssize_t gfs2_file_direct_write(struct kiocb *iocb, struct iov_iter *from,
+ leftover = fault_in_iov_iter_readable(from, window_size);
+ gfs2_holder_disallow_demote(gh);
+ if (leftover != window_size) {
+- if (!gfs2_holder_queued(gh))
+- goto retry;
+- goto retry_under_glock;
++ if (gfs2_holder_queued(gh))
++ goto retry_under_glock;
++ goto retry;
+ }
+ }
+ out:
+@@ -989,12 +989,11 @@ static ssize_t gfs2_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
+ leftover = fault_in_iov_iter_writeable(to, window_size);
+ gfs2_holder_disallow_demote(&gh);
+ if (leftover != window_size) {
+- if (!gfs2_holder_queued(&gh)) {
+- if (written)
+- goto out_uninit;
+- goto retry;
+- }
+- goto retry_under_glock;
++ if (gfs2_holder_queued(&gh))
++ goto retry_under_glock;
++ if (written)
++ goto out_uninit;
++ goto retry;
+ }
+ }
+ if (gfs2_holder_queued(&gh))
+@@ -1068,12 +1067,11 @@ static ssize_t gfs2_file_buffered_write(struct kiocb *iocb,
+ gfs2_holder_disallow_demote(gh);
+ if (leftover != window_size) {
+ from->count = min(from->count, window_size - leftover);
+- if (!gfs2_holder_queued(gh)) {
+- if (read)
+- goto out_uninit;
+- goto retry;
+- }
+- goto retry_under_glock;
++ if (gfs2_holder_queued(gh))
++ goto retry_under_glock;
++ if (read)
++ goto out_uninit;
++ goto retry;
+ }
+ }
+ out_unlock:
+--
+2.35.1
+
--- /dev/null
+From a7ec7949e2320ff75438beeaf7c433f912fbe20f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 28 Apr 2022 14:51:33 +0200
+Subject: gfs2: No short reads or writes upon glock contention
+
+From: Andreas Gruenbacher <agruenba@redhat.com>
+
+[ Upstream commit 296abc0d91d8b65d42224dd33452ace14491ad08 ]
+
+Commit 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered
+I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
+allow dropping the inode glock while faulting in user buffers. When the
+lock was dropped, a short result was returned to indicate that the
+operation was interrupted.
+
+As pointed out by Linus (see the link below), this behavior is broken
+and the operations should always re-acquire the inode glock and resume
+the operation instead.
+
+Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/
+Fixes: 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O")
+Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/gfs2/file.c | 4 ----
+ 1 file changed, 4 deletions(-)
+
+diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
+index fdc7eda0437a..fa071d738c78 100644
+--- a/fs/gfs2/file.c
++++ b/fs/gfs2/file.c
+@@ -991,8 +991,6 @@ static ssize_t gfs2_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
+ if (leftover != window_size) {
+ if (gfs2_holder_queued(&gh))
+ goto retry_under_glock;
+- if (written)
+- goto out_uninit;
+ goto retry;
+ }
+ }
+@@ -1069,8 +1067,6 @@ static ssize_t gfs2_file_buffered_write(struct kiocb *iocb,
+ from->count = min(from->count, window_size - leftover);
+ if (gfs2_holder_queued(gh))
+ goto retry_under_glock;
+- if (read && !(iocb->ki_flags & IOCB_DIRECT))
+- goto out_uninit;
+ goto retry;
+ }
+ }
+--
+2.35.1
+
--- /dev/null
+From 8b59cb1518a657f1415a47a9d9a448b36e054a27 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 13 Apr 2022 17:37:45 +0200
+Subject: ice: wait 5 s for EMP reset after firmware flash
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Petr Oros <poros@redhat.com>
+
+[ Upstream commit b537752e6cbf0e4475c165178ca02241b53ff6ef ]
+
+We need to wait 5 s for EMP reset after firmware flash. Code was extracted
+from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this
+wait, fw_activate let card in inconsistent state and recoverable only
+by second flash/activate. Flash was tested on these fw's:
+From -> To
+ 3.00 -> 3.10/3.20
+ 3.10 -> 3.00/3.20
+ 3.20 -> 3.00/3.10
+
+Reproducer:
+[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
+Preparing to flash
+[fw.mgmt] Erasing
+[fw.mgmt] Erasing done
+[fw.mgmt] Flashing 100%
+[fw.mgmt] Flashing done 100%
+[fw.undi] Erasing
+[fw.undi] Erasing done
+[fw.undi] Flashing 100%
+[fw.undi] Flashing done 100%
+[fw.netlist] Erasing
+[fw.netlist] Erasing done
+[fw.netlist] Flashing 100%
+[fw.netlist] Flashing done 100%
+Activate new firmware by devlink reload
+[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
+reload_actions_performed:
+ fw_activate
+[root@host ~]# ip link show ens7f0
+71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
+ link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
+ altname enp202s0f0
+
+dmesg after flash:
+[ 55.120788] ice: Copyright (c) 2018, Intel Corporation.
+[ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway
+[ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0
+[ 55.603629] ice 0000:ca:00.0: Get PHY capability failed.
+[ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5
+[ 55.647348] ice 0000:ca:00.0: PTP init successful
+[ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8
+[ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode.
+[ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware
+[ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
+Reboot doesn’t help, only second flash/activate with OOT or patched
+driver put card back in consistent state.
+
+After patch:
+[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
+Preparing to flash
+[fw.mgmt] Erasing
+[fw.mgmt] Erasing done
+[fw.mgmt] Flashing 100%
+[fw.mgmt] Flashing done 100%
+[fw.undi] Erasing
+[fw.undi] Erasing done
+[fw.undi] Flashing 100%
+[fw.undi] Flashing done 100%
+[fw.netlist] Erasing
+[fw.netlist] Erasing done
+[fw.netlist] Flashing 100%
+[fw.netlist] Flashing done 100%
+Activate new firmware by devlink reload
+[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
+reload_actions_performed:
+ fw_activate
+[root@host ~]# ip link show ens7f0
+19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
+ link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
+ altname enp202s0f0
+
+Fixes: 399e27dbbd9e94 ("ice: support immediate firmware activation via devlink reload")
+Signed-off-by: Petr Oros <poros@redhat.com>
+Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
+Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/intel/ice/ice_main.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
+index 2de2bbbca1e9..e347030ee2e3 100644
+--- a/drivers/net/ethernet/intel/ice/ice_main.c
++++ b/drivers/net/ethernet/intel/ice/ice_main.c
+@@ -6662,12 +6662,15 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type)
+
+ dev_dbg(dev, "rebuilding PF after reset_type=%d\n", reset_type);
+
++#define ICE_EMP_RESET_SLEEP_MS 5000
+ if (reset_type == ICE_RESET_EMPR) {
+ /* If an EMP reset has occurred, any previously pending flash
+ * update will have completed. We no longer know whether or
+ * not the NVM update EMP reset is restricted.
+ */
+ pf->fw_emp_reset_disabled = false;
++
++ msleep(ICE_EMP_RESET_SLEEP_MS);
+ }
+
+ err = ice_init_all_ctrlq(hw);
+--
+2.35.1
+
--- /dev/null
+From 8cb966c105b9bf349fc7f0be3d3c0872b8457009 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 4 Apr 2022 14:42:44 +0300
+Subject: iio:dac:ad3552r: Fix an IS_ERR() vs NULL check
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Dan Carpenter <dan.carpenter@oracle.com>
+
+[ Upstream commit de3b9fe9609a05d3c354c6718ca657962d11d9fe ]
+
+The fwnode_get_named_child_node() function does not return error
+pointers. It returns NULL. Update the check accordingly.
+
+Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support")
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Reviewed-by: Nuno Sá <nuno.sa@analog.com>
+Link: https://lore.kernel.org/r/20220404114244.GA19201@kili
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/dac/ad3552r.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
+index e0a93b27e0e8..d5ea1a1be122 100644
+--- a/drivers/iio/dac/ad3552r.c
++++ b/drivers/iio/dac/ad3552r.c
+@@ -809,10 +809,10 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
+
+ gain_child = fwnode_get_named_child_node(child,
+ "custom-output-range-config");
+- if (IS_ERR(gain_child)) {
++ if (!gain_child) {
+ dev_err(dev,
+ "mandatory custom-output-range-config property missing\n");
+- return PTR_ERR(gain_child);
++ return -EINVAL;
+ }
+
+ dac->ch_data[ch].range_override = 1;
+--
+2.35.1
+
--- /dev/null
+From b5b2203f0863d02cb1d8e2706af1e72537e335f8 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 16 Mar 2022 15:23:54 +0300
+Subject: iio: dac: ad3552r: fix signedness bug in ad3552r_reset()
+
+From: Dan Carpenter <dan.carpenter@oracle.com>
+
+[ Upstream commit 460bfa65b0de72f4d8a808bc7cfb1cb591a95b18 ]
+
+The "val" variable is used to store either negative error codes from
+ad3552r_read_reg_wrapper() or positive u16 values on success. It needs
+to be signed for the error handling to work correctly.
+
+Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support")
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Link: https://lore.kernel.org/r/20220316122354.GA16825@kili
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/dac/ad3552r.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
+index 97f13c0b9631..e0a93b27e0e8 100644
+--- a/drivers/iio/dac/ad3552r.c
++++ b/drivers/iio/dac/ad3552r.c
+@@ -656,7 +656,7 @@ static int ad3552r_reset(struct ad3552r_desc *dac)
+ {
+ struct reg_addr_pool addr;
+ int ret;
+- u16 val;
++ int val;
+
+ dac->gpio_reset = devm_gpiod_get_optional(&dac->spi->dev, "reset",
+ GPIOD_OUT_LOW);
+--
+2.35.1
+
--- /dev/null
+From 53544078b2e9e3a5acf003800e5ea762c9ae4599 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 20 Mar 2022 13:54:57 +0800
+Subject: iio:filter:admv8818: select REGMAP_SPI for ADMV8818
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Wang ShaoBo <bobo.shaobowang@huawei.com>
+
+[ Upstream commit d85cce86a86746354fffb688dd134609c8277adc ]
+
+admv8818 driver needs __devm_regmap_init_spi() which is defined
+when CONFIG_REGMAP_SPI is set and struct regmap_config when
+CONFIG_REGMAP is set, so automatically select CONFIG_REGMAP_SPI
+which also sets CONFIG_REGMAP.
+
+Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
+Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
+Reviewed-by: Nuno Sá <nuno.sa@analog.com>
+Link: https://lore.kernel.org/r/20220320055457.254983-1-bobo.shaobowang@huawei.com
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/filter/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/iio/filter/Kconfig b/drivers/iio/filter/Kconfig
+index 3ae35817ad82..a85b345ea14e 100644
+--- a/drivers/iio/filter/Kconfig
++++ b/drivers/iio/filter/Kconfig
+@@ -8,6 +8,7 @@ menu "Filters"
+ config ADMV8818
+ tristate "Analog Devices ADMV8818 High-Pass and Low-Pass Filter"
+ depends on SPI && COMMON_CLK && 64BIT
++ select REGMAP_SPI
+ help
+ Say yes here to build support for Analog Devices ADMV8818
+ 2 GHz to 18 GHz, Digitally Tunable, High-Pass and Low-Pass Filter.
+--
+2.35.1
+
--- /dev/null
+From 5fb64d0c21853c2ff46b7215f3338703dfc2199b Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 27 Mar 2022 08:40:05 -0700
+Subject: iio:imu:bmi160: disable regulator in error path
+
+From: Tong Zhang <ztong0001@gmail.com>
+
+[ Upstream commit d926054d5565d3cfa2c7c3f7a48e79bcc10453ed ]
+
+Regulator should be disabled in error path as mentioned in _regulator_put().
+Also disable accel if gyro cannot be enabled.
+
+[ 16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put
+[ 16.240453] Call Trace:
+[ 16.240572] <TASK>
+[ 16.240676] regulator_put+0x26/0x40
+[ 16.240853] regulator_bulk_free+0x26/0x50
+[ 16.241050] release_nodes+0x3f/0x70
+[ 16.241225] devres_release_group+0x147/0x1c0
+[ 16.241441] ? bmi160_core_probe+0x175/0x3a0 [bmi160_core]
+
+Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support")
+Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Signed-off-by: Tong Zhang <ztong0001@gmail.com>
+Link: https://lore.kernel.org/r/20220327154005.806049-1-ztong0001@gmail.com
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/imu/bmi160/bmi160_core.c | 20 ++++++++++++++------
+ 1 file changed, 14 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
+index 824b5124a5f5..01336105792e 100644
+--- a/drivers/iio/imu/bmi160/bmi160_core.c
++++ b/drivers/iio/imu/bmi160/bmi160_core.c
+@@ -730,7 +730,7 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
+
+ ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
+ if (ret)
+- return ret;
++ goto disable_regulator;
+
+ usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);
+
+@@ -741,29 +741,37 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
+ if (use_spi) {
+ ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val);
+ if (ret)
+- return ret;
++ goto disable_regulator;
+ }
+
+ ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val);
+ if (ret) {
+ dev_err(dev, "Error reading chip id\n");
+- return ret;
++ goto disable_regulator;
+ }
+ if (val != BMI160_CHIP_ID_VAL) {
+ dev_err(dev, "Wrong chip id, got %x expected %x\n",
+ val, BMI160_CHIP_ID_VAL);
+- return -ENODEV;
++ ret = -ENODEV;
++ goto disable_regulator;
+ }
+
+ ret = bmi160_set_mode(data, BMI160_ACCEL, true);
+ if (ret)
+- return ret;
++ goto disable_regulator;
+
+ ret = bmi160_set_mode(data, BMI160_GYRO, true);
+ if (ret)
+- return ret;
++ goto disable_accel;
+
+ return 0;
++
++disable_accel:
++ bmi160_set_mode(data, BMI160_ACCEL, false);
++
++disable_regulator:
++ regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
++ return ret;
+ }
+
+ static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,
+--
+2.35.1
+
--- /dev/null
+From 0e511148b9769fb6c851c15df13b2afa27ab73ef Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 8 Apr 2022 19:30:49 -0700
+Subject: Input: cypress-sf - register a callback to disable the regulators
+
+From: Zheyu Ma <zheyuma97@gmail.com>
+
+[ Upstream commit fd0a4b39870d49ff15f6966470185409e261f20f ]
+
+When the driver fails to probe, we will get the following splat:
+
+[ 19.311970] ------------[ cut here ]------------
+[ 19.312566] WARNING: CPU: 3 PID: 375 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
+[ 19.317591] RIP: 0010:_regulator_put+0x3ec/0x4e0
+[ 19.328831] Call Trace:
+[ 19.329112] <TASK>
+[ 19.329369] regulator_bulk_free+0x82/0xe0
+[ 19.329860] devres_release_group+0x319/0x3d0
+[ 19.330357] i2c_device_probe+0x766/0x940
+
+Fix this by adding a callback that will deal with the disabling when the
+driver fails to probe.
+
+Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
+Link: https://lore.kernel.org/r/20220409022629.3493557-1-zheyuma97@gmail.com
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/input/keyboard/cypress-sf.c | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/drivers/input/keyboard/cypress-sf.c b/drivers/input/keyboard/cypress-sf.c
+index c28996028e80..9a23eed6a4f4 100644
+--- a/drivers/input/keyboard/cypress-sf.c
++++ b/drivers/input/keyboard/cypress-sf.c
+@@ -61,6 +61,14 @@ static irqreturn_t cypress_sf_irq_handler(int irq, void *devid)
+ return IRQ_HANDLED;
+ }
+
++static void cypress_sf_disable_regulators(void *arg)
++{
++ struct cypress_sf_data *touchkey = arg;
++
++ regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
++ touchkey->regulators);
++}
++
+ static int cypress_sf_probe(struct i2c_client *client)
+ {
+ struct cypress_sf_data *touchkey;
+@@ -121,6 +129,12 @@ static int cypress_sf_probe(struct i2c_client *client)
+ return error;
+ }
+
++ error = devm_add_action_or_reset(&client->dev,
++ cypress_sf_disable_regulators,
++ touchkey);
++ if (error)
++ return error;
++
+ touchkey->input_dev = devm_input_allocate_device(&client->dev);
+ if (!touchkey->input_dev) {
+ dev_err(&client->dev, "Failed to allocate input device\n");
+--
+2.35.1
+
--- /dev/null
+From 3c4b0995ef7d22f579e8fa44c9b07e171a2b1d6c Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 12 Apr 2022 15:00:32 -0700
+Subject: interconnect: qcom: sc7180: Drop IP0 interconnects
+
+From: Stephen Boyd <swboyd@chromium.org>
+
+[ Upstream commit 2f3724930eb4bba74f7d10bc3bef5bb22dd323df ]
+
+The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver
+in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and
+modeled as a clk, but this interconnect driver still had it modeled as
+an interconnect. This was mostly OK because nobody used the interconnect
+definition, until the interconnect framework started dropping bandwidth
+requests on interconnects that aren't used via the sync_state callback
+in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once
+that patch was applied the IP0 resource was going to be controlled from
+two places, the clk framework and the interconnect framework.
+
+Even then, things were probably going to be OK, because commit
+b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in
+pre_aggregate") was needed to actually drop bandwidth requests on unused
+interconnects, of which the IPA was one of the interconnect that wasn't
+getting dropped to zero. Combining the three commits together leads to
+bad behavior where the interconnect framework is disabling the IP0
+resource because it has no users while the clk framework thinks the IP0
+resource is on because the only user, the IPA driver, has turned it on
+via clk_prepare_enable(). Depending on when sync_state is called, we can
+get into a situation like below:
+
+ IPA driver probes
+ IPA driver gets notified modem started
+ runtime PM get()
+ IPA clk enabled -> IP0 resource is ON
+ sync_state runs
+ interconnect zeroes out the IP0 resource -> IP0 resource is off
+ IPA driver tries to access a register and blows up
+
+The crash is an unclocked access that manifest as an SError.
+
+ SError Interrupt on CPU0, code 0xbe000011 -- SError
+ CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
+ Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
+ pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
+ pc : mutex_lock+0x4c/0x80
+ lr : mutex_lock+0x30/0x80
+ sp : ffffffc00da9b9c0
+ x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000
+ x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000
+ x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8
+ x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00
+ x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000
+ x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
+ x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000
+ x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080
+ x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28
+ x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070
+ Kernel panic - not syncing: Asynchronous SError Interrupt
+ CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
+ Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
+ Call trace:
+ dump_backtrace+0xf4/0x114
+ show_stack+0x24/0x30
+ dump_stack_lvl+0x64/0x7c
+ dump_stack+0x18/0x38
+ panic+0x150/0x38c
+ nmi_panic+0x88/0xa0
+ arm64_serror_panic+0x74/0x80
+ do_serror+0x0/0x80
+ do_serror+0x58/0x80
+ el1h_64_error_handler+0x34/0x4c
+ el1h_64_error+0x78/0x7c
+ mutex_lock+0x4c/0x80
+ __gsi_channel_start+0x50/0x17c
+ gsi_channel_start+0x54/0x90
+ ipa_endpoint_enable_one+0x34/0xc0
+ ipa_open+0x4c/0x120
+
+Remove all IP0 resource management from the interconnect driver so that
+clk-rpmh is the sole owner. This fixes the issue by preventing the
+interconnect driver from overwriting the IP0 resource data that the
+clk-rpmh driver wrote.
+
+Cc: Alex Elder <elder@linaro.org>
+Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
+Cc: Taniya Das <quic_tdas@quicinc.com>
+Cc: Mike Tipton <quic_mdtipton@quicinc.com>
+Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
+Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180")
+Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state")
+Signed-off-by: Stephen Boyd <swboyd@chromium.org>
+Tested-by: Alex Elder <elder@linaro.org>
+Reviewed-by: Alex Elder <elder@linaro.org>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org
+Signed-off-by: Georgi Djakov <djakov@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/interconnect/qcom/sc7180.c | 21 ---------------------
+ 1 file changed, 21 deletions(-)
+
+diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c
+index 12d59c36df53..5f7c0f85fa8e 100644
+--- a/drivers/interconnect/qcom/sc7180.c
++++ b/drivers/interconnect/qcom/sc7180.c
+@@ -47,7 +47,6 @@ DEFINE_QNODE(qnm_mnoc_sf, SC7180_MASTER_MNOC_SF_MEM_NOC, 1, 32, SC7180_SLAVE_GEM
+ DEFINE_QNODE(qnm_snoc_gc, SC7180_MASTER_SNOC_GC_MEM_NOC, 1, 8, SC7180_SLAVE_LLCC);
+ DEFINE_QNODE(qnm_snoc_sf, SC7180_MASTER_SNOC_SF_MEM_NOC, 1, 16, SC7180_SLAVE_LLCC);
+ DEFINE_QNODE(qxm_gpu, SC7180_MASTER_GFX3D, 2, 32, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC);
+-DEFINE_QNODE(ipa_core_master, SC7180_MASTER_IPA_CORE, 1, 8, SC7180_SLAVE_IPA_CORE);
+ DEFINE_QNODE(llcc_mc, SC7180_MASTER_LLCC, 2, 4, SC7180_SLAVE_EBI1);
+ DEFINE_QNODE(qhm_mnoc_cfg, SC7180_MASTER_CNOC_MNOC_CFG, 1, 4, SC7180_SLAVE_SERVICE_MNOC);
+ DEFINE_QNODE(qxm_camnoc_hf0, SC7180_MASTER_CAMNOC_HF0, 2, 32, SC7180_SLAVE_MNOC_HF_MEM_NOC);
+@@ -129,7 +128,6 @@ DEFINE_QNODE(qhs_mdsp_ms_mpu_cfg, SC7180_SLAVE_MSS_PROC_MS_MPU_CFG, 1, 4);
+ DEFINE_QNODE(qns_gem_noc_snoc, SC7180_SLAVE_GEM_NOC_SNOC, 1, 8, SC7180_MASTER_GEM_NOC_SNOC);
+ DEFINE_QNODE(qns_llcc, SC7180_SLAVE_LLCC, 1, 16, SC7180_MASTER_LLCC);
+ DEFINE_QNODE(srvc_gemnoc, SC7180_SLAVE_SERVICE_GEM_NOC, 1, 4);
+-DEFINE_QNODE(ipa_core_slave, SC7180_SLAVE_IPA_CORE, 1, 8);
+ DEFINE_QNODE(ebi, SC7180_SLAVE_EBI1, 2, 4);
+ DEFINE_QNODE(qns_mem_noc_hf, SC7180_SLAVE_MNOC_HF_MEM_NOC, 1, 32, SC7180_MASTER_MNOC_HF_MEM_NOC);
+ DEFINE_QNODE(qns_mem_noc_sf, SC7180_SLAVE_MNOC_SF_MEM_NOC, 1, 32, SC7180_MASTER_MNOC_SF_MEM_NOC);
+@@ -160,7 +158,6 @@ DEFINE_QBCM(bcm_mc0, "MC0", true, &ebi);
+ DEFINE_QBCM(bcm_sh0, "SH0", true, &qns_llcc);
+ DEFINE_QBCM(bcm_mm0, "MM0", false, &qns_mem_noc_hf);
+ DEFINE_QBCM(bcm_ce0, "CE0", false, &qxm_crypto);
+-DEFINE_QBCM(bcm_ip0, "IP0", false, &ipa_core_slave);
+ DEFINE_QBCM(bcm_cn0, "CN0", true, &qnm_snoc, &xm_qdss_dap, &qhs_a1_noc_cfg, &qhs_a2_noc_cfg, &qhs_ahb2phy0, &qhs_aop, &qhs_aoss, &qhs_boot_rom, &qhs_camera_cfg, &qhs_camera_nrt_throttle_cfg, &qhs_camera_rt_throttle_cfg, &qhs_clk_ctl, &qhs_cpr_cx, &qhs_cpr_mx, &qhs_crypto0_cfg, &qhs_dcc_cfg, &qhs_ddrss_cfg, &qhs_display_cfg, &qhs_display_rt_throttle_cfg, &qhs_display_throttle_cfg, &qhs_glm, &qhs_gpuss_cfg, &qhs_imem_cfg, &qhs_ipa, &qhs_mnoc_cfg, &qhs_mss_cfg, &qhs_npu_cfg, &qhs_npu_dma_throttle_cfg, &qhs_npu_dsp_throttle_cfg, &qhs_pimem_cfg, &qhs_prng, &qhs_qdss_cfg, &qhs_qm_cfg, &qhs_qm_mpu_cfg, &qhs_qup0, &qhs_qup1, &qhs_security, &qhs_snoc_cfg, &qhs_tcsr, &qhs_tlmm_1, &qhs_tlmm_2, &qhs_tlmm_3, &qhs_ufs_mem_cfg, &qhs_usb3, &qhs_venus_cfg, &qhs_venus_throttle_cfg, &qhs_vsense_ctrl_cfg, &srvc_cnoc);
+ DEFINE_QBCM(bcm_mm1, "MM1", false, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qhm_mnoc_cfg, &qxm_mdp0, &qxm_rot, &qxm_venus0, &qxm_venus_arm9);
+ DEFINE_QBCM(bcm_sh2, "SH2", false, &acm_sys_tcu);
+@@ -372,22 +369,6 @@ static struct qcom_icc_desc sc7180_gem_noc = {
+ .num_bcms = ARRAY_SIZE(gem_noc_bcms),
+ };
+
+-static struct qcom_icc_bcm *ipa_virt_bcms[] = {
+- &bcm_ip0,
+-};
+-
+-static struct qcom_icc_node *ipa_virt_nodes[] = {
+- [MASTER_IPA_CORE] = &ipa_core_master,
+- [SLAVE_IPA_CORE] = &ipa_core_slave,
+-};
+-
+-static struct qcom_icc_desc sc7180_ipa_virt = {
+- .nodes = ipa_virt_nodes,
+- .num_nodes = ARRAY_SIZE(ipa_virt_nodes),
+- .bcms = ipa_virt_bcms,
+- .num_bcms = ARRAY_SIZE(ipa_virt_bcms),
+-};
+-
+ static struct qcom_icc_bcm *mc_virt_bcms[] = {
+ &bcm_acv,
+ &bcm_mc0,
+@@ -519,8 +500,6 @@ static const struct of_device_id qnoc_of_match[] = {
+ .data = &sc7180_dc_noc},
+ { .compatible = "qcom,sc7180-gem-noc",
+ .data = &sc7180_gem_noc},
+- { .compatible = "qcom,sc7180-ipa-virt",
+- .data = &sc7180_ipa_virt},
+ { .compatible = "qcom,sc7180-mc-virt",
+ .data = &sc7180_mc_virt},
+ { .compatible = "qcom,sc7180-mmss-noc",
+--
+2.35.1
+
--- /dev/null
+From 19f4e24786dfbe605589b80dae04c6a00deb3f70 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 12 Apr 2022 15:00:33 -0700
+Subject: interconnect: qcom: sdx55: Drop IP0 interconnects
+
+From: Stephen Boyd <swboyd@chromium.org>
+
+[ Upstream commit 2fb251c265608636fc961b7d38e1a03937e57371 ]
+
+Similar to the sc7180 commit, let's drop the IP0 interconnects here
+because the IP0 resource is also used in the clk-rpmh driver on sdx55.
+It's bad to have the clk framework and interconnect framework control
+the same RPMh resource without any coordination. The rpmh driver in the
+kernel doesn't aggregate resources between clients either, so leaving
+control to clk-rpmh avoids any issues with unused interconnects turning
+off IP0 behind the back of the clk framework.
+
+Cc: Alex Elder <elder@linaro.org>
+Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
+Cc: Taniya Das <quic_tdas@quicinc.com>
+Cc: Mike Tipton <quic_mdtipton@quicinc.com>
+Fixes: b2150cab9a97 ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock")
+Signed-off-by: Stephen Boyd <swboyd@chromium.org>
+Reviewed-by: Alex Elder <elder@linaro.org>
+Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org
+Signed-off-by: Georgi Djakov <djakov@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/interconnect/qcom/sdx55.c | 21 ---------------------
+ 1 file changed, 21 deletions(-)
+
+diff --git a/drivers/interconnect/qcom/sdx55.c b/drivers/interconnect/qcom/sdx55.c
+index 03d604f84cc5..e3ac25a997b7 100644
+--- a/drivers/interconnect/qcom/sdx55.c
++++ b/drivers/interconnect/qcom/sdx55.c
+@@ -18,7 +18,6 @@
+ #include "icc-rpmh.h"
+ #include "sdx55.h"
+
+-DEFINE_QNODE(ipa_core_master, SDX55_MASTER_IPA_CORE, 1, 8, SDX55_SLAVE_IPA_CORE);
+ DEFINE_QNODE(llcc_mc, SDX55_MASTER_LLCC, 4, 4, SDX55_SLAVE_EBI_CH0);
+ DEFINE_QNODE(acm_tcu, SDX55_MASTER_TCU_0, 1, 8, SDX55_SLAVE_LLCC, SDX55_SLAVE_MEM_NOC_SNOC, SDX55_SLAVE_MEM_NOC_PCIE_SNOC);
+ DEFINE_QNODE(qnm_snoc_gc, SDX55_MASTER_SNOC_GC_MEM_NOC, 1, 8, SDX55_SLAVE_LLCC);
+@@ -40,7 +39,6 @@ DEFINE_QNODE(xm_pcie, SDX55_MASTER_PCIE, 1, 8, SDX55_SLAVE_ANOC_SNOC);
+ DEFINE_QNODE(xm_qdss_etr, SDX55_MASTER_QDSS_ETR, 1, 8, SDX55_SLAVE_SNOC_CFG, SDX55_SLAVE_EMAC_CFG, SDX55_SLAVE_USB3, SDX55_SLAVE_AOSS, SDX55_SLAVE_SPMI_FETCHER, SDX55_SLAVE_QDSS_CFG, SDX55_SLAVE_PDM, SDX55_SLAVE_SNOC_MEM_NOC_GC, SDX55_SLAVE_TCSR, SDX55_SLAVE_CNOC_DDRSS, SDX55_SLAVE_SPMI_VGI_COEX, SDX55_SLAVE_QPIC, SDX55_SLAVE_OCIMEM, SDX55_SLAVE_IPA_CFG, SDX55_SLAVE_USB3_PHY_CFG, SDX55_SLAVE_AOP, SDX55_SLAVE_BLSP_1, SDX55_SLAVE_SDCC_1, SDX55_SLAVE_CNOC_MSS, SDX55_SLAVE_PCIE_PARF, SDX55_SLAVE_ECC_CFG, SDX55_SLAVE_AUDIO, SDX55_SLAVE_AOSS, SDX55_SLAVE_PRNG, SDX55_SLAVE_CRYPTO_0_CFG, SDX55_SLAVE_TCU, SDX55_SLAVE_CLK_CTL, SDX55_SLAVE_IMEM_CFG);
+ DEFINE_QNODE(xm_sdc1, SDX55_MASTER_SDCC_1, 1, 8, SDX55_SLAVE_AOSS, SDX55_SLAVE_IPA_CFG, SDX55_SLAVE_ANOC_SNOC, SDX55_SLAVE_AOP, SDX55_SLAVE_AUDIO);
+ DEFINE_QNODE(xm_usb3, SDX55_MASTER_USB3, 1, 8, SDX55_SLAVE_ANOC_SNOC);
+-DEFINE_QNODE(ipa_core_slave, SDX55_SLAVE_IPA_CORE, 1, 8);
+ DEFINE_QNODE(ebi, SDX55_SLAVE_EBI_CH0, 1, 4);
+ DEFINE_QNODE(qns_llcc, SDX55_SLAVE_LLCC, 1, 16, SDX55_SLAVE_EBI_CH0);
+ DEFINE_QNODE(qns_memnoc_snoc, SDX55_SLAVE_MEM_NOC_SNOC, 1, 8, SDX55_MASTER_MEM_NOC_SNOC);
+@@ -82,7 +80,6 @@ DEFINE_QNODE(xs_sys_tcu_cfg, SDX55_SLAVE_TCU, 1, 8);
+ DEFINE_QBCM(bcm_mc0, "MC0", true, &ebi);
+ DEFINE_QBCM(bcm_sh0, "SH0", true, &qns_llcc);
+ DEFINE_QBCM(bcm_ce0, "CE0", false, &qxm_crypto);
+-DEFINE_QBCM(bcm_ip0, "IP0", false, &ipa_core_slave);
+ DEFINE_QBCM(bcm_pn0, "PN0", false, &qhm_snoc_cfg);
+ DEFINE_QBCM(bcm_sh3, "SH3", false, &xm_apps_rdwr);
+ DEFINE_QBCM(bcm_sh4, "SH4", false, &qns_memnoc_snoc, &qns_sys_pcie);
+@@ -219,22 +216,6 @@ static const struct qcom_icc_desc sdx55_system_noc = {
+ .num_bcms = ARRAY_SIZE(system_noc_bcms),
+ };
+
+-static struct qcom_icc_bcm *ipa_virt_bcms[] = {
+- &bcm_ip0,
+-};
+-
+-static struct qcom_icc_node *ipa_virt_nodes[] = {
+- [MASTER_IPA_CORE] = &ipa_core_master,
+- [SLAVE_IPA_CORE] = &ipa_core_slave,
+-};
+-
+-static const struct qcom_icc_desc sdx55_ipa_virt = {
+- .nodes = ipa_virt_nodes,
+- .num_nodes = ARRAY_SIZE(ipa_virt_nodes),
+- .bcms = ipa_virt_bcms,
+- .num_bcms = ARRAY_SIZE(ipa_virt_bcms),
+-};
+-
+ static const struct of_device_id qnoc_of_match[] = {
+ { .compatible = "qcom,sdx55-mc-virt",
+ .data = &sdx55_mc_virt},
+@@ -242,8 +223,6 @@ static const struct of_device_id qnoc_of_match[] = {
+ .data = &sdx55_mem_noc},
+ { .compatible = "qcom,sdx55-system-noc",
+ .data = &sdx55_system_noc},
+- { .compatible = "qcom,sdx55-ipa-virt",
+- .data = &sdx55_ipa_virt},
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, qnoc_of_match);
+--
+2.35.1
+
--- /dev/null
+From a040176a770ed7dc68e37d22ef3f14f9ba22efad Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 26 Apr 2022 19:34:57 -0600
+Subject: io_uring: check reserved fields for recv/recvmsg
+
+From: Jens Axboe <axboe@kernel.dk>
+
+[ Upstream commit 5a1e99b61b0c81388cde0c808b3e4173907df19f ]
+
+We should check unused fields for non-zero and -EINVAL if they are set,
+making it consistent with other opcodes.
+
+Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()")
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/io_uring.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/fs/io_uring.c b/fs/io_uring.c
+index 107bce75131e..531d0086d0b3 100644
+--- a/fs/io_uring.c
++++ b/fs/io_uring.c
+@@ -5103,6 +5103,8 @@ static int io_recvmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
++ if (unlikely(sqe->addr2 || sqe->file_index))
++ return -EINVAL;
+
+ sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr));
+ sr->len = READ_ONCE(sqe->len);
+--
+2.35.1
+
--- /dev/null
+From ee2e54a5b09c2666b906919c5b651421d8375119 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 26 Apr 2022 19:34:11 -0600
+Subject: io_uring: check reserved fields for send/sendmsg
+
+From: Jens Axboe <axboe@kernel.dk>
+
+[ Upstream commit 588faa1ea5eecb351100ee5d187b9be99210f70d ]
+
+We should check unused fields for non-zero and -EINVAL if they are set,
+making it consistent with other opcodes.
+
+Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()")
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/io_uring.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/fs/io_uring.c b/fs/io_uring.c
+index fbba8342172a..107bce75131e 100644
+--- a/fs/io_uring.c
++++ b/fs/io_uring.c
+@@ -4890,6 +4890,8 @@ static int io_sendmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
++ if (unlikely(sqe->addr2 || sqe->file_index))
++ return -EINVAL;
+
+ sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr));
+ sr->len = READ_ONCE(sqe->len);
+--
+2.35.1
+
--- /dev/null
+From 7796dfc8534b6ea120d9c907b71015c1d4cfcd81 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 28 Apr 2022 12:57:52 -0400
+Subject: io_uring: fix uninitialized field in rw io_kiocb
+
+From: Joseph Ravichandran <jravi@mit.edu>
+
+[ Upstream commit 32452a3eb8b64e01e2be717f518c0be046975b9d ]
+
+io_rw_init_file does not initialize kiocb->private, so when iocb_bio_iopoll
+reads kiocb->private it can contain uninitialized data.
+
+Fixes: 3e08773c3841 ("block: switch polling to be bio based")
+Signed-off-by: Joseph Ravichandran <jravi@mit.edu>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/io_uring.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/fs/io_uring.c b/fs/io_uring.c
+index 531d0086d0b3..87df37912055 100644
+--- a/fs/io_uring.c
++++ b/fs/io_uring.c
+@@ -3584,6 +3584,7 @@ static int io_rw_init_file(struct io_kiocb *req, fmode_t mode)
+ if (!(kiocb->ki_flags & IOCB_DIRECT) || !file->f_op->iopoll)
+ return -EOPNOTSUPP;
+
++ kiocb->private = NULL;
+ kiocb->ki_flags |= IOCB_HIPRI | IOCB_ALLOC_CACHE;
+ kiocb->ki_complete = io_complete_rw_iopoll;
+ req->iopoll_completed = 0;
+--
+2.35.1
+
--- /dev/null
+From 9513fc97f4ec1b14ddc1c61ea41ee307b78d3997 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 15:08:38 -0700
+Subject: ip6_gre: Make o_seqno start from 0 in native mode
+
+From: Peilin Ye <peilin.ye@bytedance.com>
+
+[ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ]
+
+For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in
+native mode. According to RFC 2890 2.2., "The first datagram is sent
+with a sequence number of 0." Fix it.
+
+It is worth mentioning that o_seqno already starts from 0 in collect_md
+mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(),
+where tunnel->o_seqno is passed to gre_build_header() before getting
+incremented.
+
+Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
+Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
+Acked-by: William Tu <u9012063@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/ipv6/ip6_gre.c | 11 +++++------
+ 1 file changed, 5 insertions(+), 6 deletions(-)
+
+diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
+index 976236736146..d9e4ac94eab4 100644
+--- a/net/ipv6/ip6_gre.c
++++ b/net/ipv6/ip6_gre.c
+@@ -724,6 +724,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+ {
+ struct ip6_tnl *tunnel = netdev_priv(dev);
+ __be16 protocol;
++ __be16 flags;
+
+ if (dev->type == ARPHRD_ETHER)
+ IPCB(skb)->flags = 0;
+@@ -739,7 +740,6 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+ if (tunnel->parms.collect_md) {
+ struct ip_tunnel_info *tun_info;
+ const struct ip_tunnel_key *key;
+- __be16 flags;
+ int tun_hlen;
+
+ tun_info = skb_tunnel_info_txcheck(skb);
+@@ -770,15 +770,14 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+ : 0);
+
+ } else {
+- if (tunnel->parms.o_flags & TUNNEL_SEQ)
+- tunnel->o_seqno++;
+-
+ if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen))
+ return -ENOMEM;
+
+- gre_build_header(skb, tunnel->tun_hlen, tunnel->parms.o_flags,
++ flags = tunnel->parms.o_flags;
++
++ gre_build_header(skb, tunnel->tun_hlen, flags,
+ protocol, tunnel->parms.o_key,
+- htonl(tunnel->o_seqno));
++ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
+ }
+
+ return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu,
+--
+2.35.1
+
--- /dev/null
+From e48b349268419269c7a5fb918f6d90618118e6d1 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 15:09:02 -0700
+Subject: ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode
+
+From: Peilin Ye <peilin.ye@bytedance.com>
+
+[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]
+
+As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
+collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the
+following sequence of events:
+
+1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
+ add ... external". "ip" ignores "[o]seq" if "external" is specified,
+ so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
+ it uses lockless TX);
+2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
+ bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
+3. gre_fb_xmit() or __gre6_xmit() processes these skb's:
+
+ gre_build_header(skb, tun_hlen,
+ flags, protocol,
+ tunnel_id_to_key32(tun_info->key.tun_id),
+ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
+ : 0); ^^^^^^^^^^^^^^^^^
+
+Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
+try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by
+making o_seqno atomic_t.
+
+As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
+xmit"), making o_seqno atomic_t increases "chance for packets being out
+of order at receiver" when NETIF_F_LLTX is on.
+
+Maybe a better fix would be:
+
+1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if
+ they want the kernel to allow sequencing of outgoing packets;
+2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
+ with "oseq".
+
+Unfortunately, that would break userspace.
+
+We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
+do it in separate patches to keep this fix minimal.
+
+Suggested-by: Jakub Kicinski <kuba@kernel.org>
+Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
+Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
+Acked-by: William Tu <u9012063@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/net/ip6_tunnel.h | 2 +-
+ include/net/ip_tunnels.h | 2 +-
+ net/ipv4/ip_gre.c | 6 +++---
+ net/ipv6/ip6_gre.c | 7 ++++---
+ 4 files changed, 9 insertions(+), 8 deletions(-)
+
+diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
+index a38c4f1e4e5c..74b369bddf49 100644
+--- a/include/net/ip6_tunnel.h
++++ b/include/net/ip6_tunnel.h
+@@ -58,7 +58,7 @@ struct ip6_tnl {
+
+ /* These fields used only by GRE */
+ __u32 i_seqno; /* The last seen seqno */
+- __u32 o_seqno; /* The last output seqno */
++ atomic_t o_seqno; /* The last output seqno */
+ int hlen; /* tun_hlen + encap_hlen */
+ int tun_hlen; /* Precalculated header length */
+ int encap_hlen; /* Encap header length (FOU,GUE) */
+diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
+index 0219fe907b26..3ec6146f8734 100644
+--- a/include/net/ip_tunnels.h
++++ b/include/net/ip_tunnels.h
+@@ -116,7 +116,7 @@ struct ip_tunnel {
+
+ /* These four fields used only by GRE */
+ u32 i_seqno; /* The last seen seqno */
+- u32 o_seqno; /* The last output seqno */
++ atomic_t o_seqno; /* The last output seqno */
+ int tun_hlen; /* Precalculated header length */
+
+ /* These four fields used only by ERSPAN */
+diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
+index ca70b92e80d9..8cf86e42c1d1 100644
+--- a/net/ipv4/ip_gre.c
++++ b/net/ipv4/ip_gre.c
+@@ -464,7 +464,7 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
+ /* Push GRE header. */
+ gre_build_header(skb, tunnel->tun_hlen,
+ flags, proto, tunnel->parms.o_key,
+- (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
++ (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);
+
+ ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
+ }
+@@ -502,7 +502,7 @@ static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev,
+ (TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
+ gre_build_header(skb, tunnel_hlen, flags, proto,
+ tunnel_id_to_key32(tun_info->key.tun_id),
+- (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
++ (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);
+
+ ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen);
+
+@@ -579,7 +579,7 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev)
+ }
+
+ gre_build_header(skb, 8, TUNNEL_SEQ,
+- proto, 0, htonl(tunnel->o_seqno++));
++ proto, 0, htonl(atomic_fetch_inc(&tunnel->o_seqno)));
+
+ ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen);
+
+diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
+index d9e4ac94eab4..5136959b3dc5 100644
+--- a/net/ipv6/ip6_gre.c
++++ b/net/ipv6/ip6_gre.c
+@@ -766,7 +766,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+ gre_build_header(skb, tun_hlen,
+ flags, protocol,
+ tunnel_id_to_key32(tun_info->key.tun_id),
+- (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
++ (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno))
+ : 0);
+
+ } else {
+@@ -777,7 +777,8 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
+
+ gre_build_header(skb, tunnel->tun_hlen, flags,
+ protocol, tunnel->parms.o_key,
+- (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
++ (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno))
++ : 0);
+ }
+
+ return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu,
+@@ -1055,7 +1056,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
+ /* Push GRE header. */
+ proto = (t->parms.erspan_ver == 1) ? htons(ETH_P_ERSPAN)
+ : htons(ETH_P_ERSPAN2);
+- gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(t->o_seqno++));
++ gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(atomic_fetch_inc(&t->o_seqno)));
+
+ /* TooBig packet may have updated dst->dev's mtu */
+ if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu)
+--
+2.35.1
+
--- /dev/null
+From 70d46bf01e91dbe9839d8ad6884480d90436c937 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 15:07:57 -0700
+Subject: ip_gre: Make o_seqno start from 0 in native mode
+
+From: Peilin Ye <peilin.ye@bytedance.com>
+
+[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ]
+
+For GRE and GRETAP devices, currently o_seqno starts from 1 in native
+mode. According to RFC 2890 2.2., "The first datagram is sent with a
+sequence number of 0." Fix it.
+
+It is worth mentioning that o_seqno already starts from 0 in collect_md
+mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
+gre_build_header() before getting incremented.
+
+Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
+Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
+Acked-by: William Tu <u9012063@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/ipv4/ip_gre.c | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
+index 99db2e41ed10..ca70b92e80d9 100644
+--- a/net/ipv4/ip_gre.c
++++ b/net/ipv4/ip_gre.c
+@@ -459,14 +459,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
+ __be16 proto)
+ {
+ struct ip_tunnel *tunnel = netdev_priv(dev);
+-
+- if (tunnel->parms.o_flags & TUNNEL_SEQ)
+- tunnel->o_seqno++;
++ __be16 flags = tunnel->parms.o_flags;
+
+ /* Push GRE header. */
+ gre_build_header(skb, tunnel->tun_hlen,
+- tunnel->parms.o_flags, proto, tunnel->parms.o_key,
+- htonl(tunnel->o_seqno));
++ flags, proto, tunnel->parms.o_key,
++ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
+
+ ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
+ }
+--
+2.35.1
+
--- /dev/null
+From dc5a0348e196b9ed2d421b4bf1653796891a4b93 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 12 Apr 2022 19:05:45 +0800
+Subject: ipvs: correctly print the memory size of ip_vs_conn_tab
+
+From: Pengcheng Yang <yangpc@wangsu.com>
+
+[ Upstream commit eba1a872cb73314280d5448d934935b23e30b7ca ]
+
+The memory size of ip_vs_conn_tab changed after we use hlist
+instead of list.
+
+Fixes: 731109e78415 ("ipvs: use hlist instead of list")
+Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
+Acked-by: Julian Anastasov <ja@ssi.bg>
+Acked-by: Simon Horman <horms@verge.net.au>
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/netfilter/ipvs/ip_vs_conn.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
+index 2c467c422dc6..fb67f1ca2495 100644
+--- a/net/netfilter/ipvs/ip_vs_conn.c
++++ b/net/netfilter/ipvs/ip_vs_conn.c
+@@ -1495,7 +1495,7 @@ int __init ip_vs_conn_init(void)
+ pr_info("Connection hash table configured "
+ "(size=%d, memory=%ldKbytes)\n",
+ ip_vs_conn_tab_size,
+- (long)(ip_vs_conn_tab_size*sizeof(struct list_head))/1024);
++ (long)(ip_vs_conn_tab_size*sizeof(*ip_vs_conn_tab))/1024);
+ IP_VS_DBG(0, "Each connection entry needs %zd bytes at least\n",
+ sizeof(struct ip_vs_conn));
+
+--
+2.35.1
+
--- /dev/null
+From 14d6385dbb01b706475c3077390182f22df4525b Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 27 Apr 2022 10:31:52 -0700
+Subject: ixgbe: ensure IPsec VF<->PF compatibility
+
+From: Leon Romanovsky <leonro@nvidia.com>
+
+[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ]
+
+The VF driver can forward any IPsec flags and such makes the function
+is not extendable and prone to backward/forward incompatibility.
+
+If new software runs on VF, it won't know that PF configured something
+completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag.
+
+Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
+Reviewed-by: Raed Salem <raeds@nvidia.com>
+Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
+Reviewed-by: Shannon Nelson <snelson@pensando.io>
+Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
+Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
+Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+index e596e1a9fc75..69d11ff7677d 100644
+--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
++++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+@@ -903,7 +903,8 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
+ /* Tx IPsec offload doesn't seem to work on this
+ * device, so block these requests for now.
+ */
+- if (!(sam->flags & XFRM_OFFLOAD_INBOUND)) {
++ sam->flags = sam->flags & ~XFRM_OFFLOAD_IPV6;
++ if (sam->flags != XFRM_OFFLOAD_INBOUND) {
+ err = -EOPNOTSUPP;
+ goto err_out;
+ }
+--
+2.35.1
+
--- /dev/null
+From 6aa440e026dda527581d529b5e65f5f6d4db667b Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 5 Apr 2022 12:04:43 +0900
+Subject: ksmbd: increment reference count of parent fp
+
+From: Namjae Jeon <linkinjeon@kernel.org>
+
+[ Upstream commit 8510a043d334ecdf83d4604782f288db6bf21d60 ]
+
+Add missing increment reference count of parent fp in
+ksmbd_lookup_fd_inode().
+
+Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
+Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/ksmbd/smb2pdu.c | 2 ++
+ fs/ksmbd/vfs_cache.c | 1 +
+ 2 files changed, 3 insertions(+)
+
+diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
+index 67e8e28e3fc3..a19a2b9c1e56 100644
+--- a/fs/ksmbd/smb2pdu.c
++++ b/fs/ksmbd/smb2pdu.c
+@@ -5771,8 +5771,10 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp,
+ if (parent_fp) {
+ if (parent_fp->daccess & FILE_DELETE_LE) {
+ pr_err("parent dir is opened with delete access\n");
++ ksmbd_fd_put(work, parent_fp);
+ return -ESHARE;
+ }
++ ksmbd_fd_put(work, parent_fp);
+ }
+ next:
+ return smb2_rename(work, fp, user_ns, rename_info,
+diff --git a/fs/ksmbd/vfs_cache.c b/fs/ksmbd/vfs_cache.c
+index 29c1db66bd0f..8b873d92d785 100644
+--- a/fs/ksmbd/vfs_cache.c
++++ b/fs/ksmbd/vfs_cache.c
+@@ -497,6 +497,7 @@ struct ksmbd_file *ksmbd_lookup_fd_inode(struct inode *inode)
+ list_for_each_entry(lfp, &ci->m_fp_list, node) {
+ if (inode == file_inode(lfp->filp)) {
+ atomic_dec(&ci->m_count);
++ lfp = ksmbd_fp_get(lfp);
+ read_unlock(&ci->m_lock);
+ return lfp;
+ }
+--
+2.35.1
+
--- /dev/null
+From 635b977f0f575763c493a448f4a5f283ae3fb6af Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 13 Apr 2022 10:01:36 +0900
+Subject: ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
+
+From: Namjae Jeon <linkinjeon@kernel.org>
+
+[ Upstream commit 02655a70b7cc0f534531ee65fa72692f4d31a944 ]
+
+Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size.
+If fat/exfat is a local share, ->f_bsize is a cluster size that is too
+large to be used as a sector size. Sector sizes larger than 4K cause
+problem occurs when mounting an iso file through windows client.
+
+The error message can be obtained using Mount-DiskImage command,
+ the error is:
+"Mount-DiskImage : The sector size of the physical disk on which the
+virtual disk resides is not supported."
+
+This patch reports fixed 4KB sector size if ->s_blocksize is bigger
+than 4KB.
+
+Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/ksmbd/smb2pdu.c | 11 +++++++----
+ 1 file changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
+index a19a2b9c1e56..83ffa73c9348 100644
+--- a/fs/ksmbd/smb2pdu.c
++++ b/fs/ksmbd/smb2pdu.c
+@@ -11,6 +11,7 @@
+ #include <linux/statfs.h>
+ #include <linux/ethtool.h>
+ #include <linux/falloc.h>
++#include <linux/mount.h>
+
+ #include "glob.h"
+ #include "smbfsctl.h"
+@@ -5005,15 +5006,17 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work,
+ case FS_SECTOR_SIZE_INFORMATION:
+ {
+ struct smb3_fs_ss_info *info;
++ unsigned int sector_size =
++ min_t(unsigned int, path.mnt->mnt_sb->s_blocksize, 4096);
+
+ info = (struct smb3_fs_ss_info *)(rsp->Buffer);
+
+- info->LogicalBytesPerSector = cpu_to_le32(stfs.f_bsize);
++ info->LogicalBytesPerSector = cpu_to_le32(sector_size);
+ info->PhysicalBytesPerSectorForAtomicity =
+- cpu_to_le32(stfs.f_bsize);
+- info->PhysicalBytesPerSectorForPerf = cpu_to_le32(stfs.f_bsize);
++ cpu_to_le32(sector_size);
++ info->PhysicalBytesPerSectorForPerf = cpu_to_le32(sector_size);
+ info->FSEffPhysicalBytesPerSectorForAtomicity =
+- cpu_to_le32(stfs.f_bsize);
++ cpu_to_le32(sector_size);
+ info->Flags = cpu_to_le32(SSINFO_FLAGS_ALIGNED_DEVICE |
+ SSINFO_FLAGS_PARTITION_ALIGNED_ON_DEVICE);
+ info->ByteOffsetForSectorAlignment = 0;
+--
+2.35.1
+
--- /dev/null
+From c47c3f9a3bf2d1d287ca37cdbe29a1e8404033ff Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 22 Apr 2022 19:43:40 +0800
+Subject: mctp: defer the kfree of object mdev->addrs
+
+From: Lin Ma <linma@zju.edu.cn>
+
+[ Upstream commit b561275d633bcd8e0e8055ab86f1a13df75a0269 ]
+
+The function mctp_unregister() reclaims the device's relevant resource
+when a netcard detaches. However, a running routine may be unaware of
+this and cause the use-after-free of the mdev->addrs object.
+
+The race condition can be demonstrated below
+
+ cleanup thread another thread
+ |
+unregister_netdev() | mctp_sendmsg()
+... | ...
+ mctp_unregister() | rt = mctp_route_lookup()
+ ... | mctl_local_output()
+ kfree(mdev->addrs) | ...
+ | saddr = rt->dev->addrs[0];
+ |
+
+An attacker can adopt the (recent provided) mtcpserial driver with pty
+to fake the device detaching and use the userfaultfd to increase the
+race success chance (in mctp_sendmsg). The KASan report for such a POC
+is shown below:
+
+[ 86.051955] ==================================================================
+[ 86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d
+[ 86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295
+[ 86.051955]
+[ 86.051955] Call Trace:
+[ 86.051955] <TASK>
+[ 86.051955] dump_stack_lvl+0x33/0x42
+[ 86.051955] print_report.cold.13+0xb2/0x6b3
+[ 86.051955] ? preempt_schedule_irq+0x57/0x80
+[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
+[ 86.051955] kasan_report+0xa5/0x120
+[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
+[ 86.051955] mctp_local_output+0x4e9/0xb7d
+[ 86.051955] ? mctp_dev_set_key+0x79/0x79
+[ 86.051955] ? copyin+0x38/0x50
+[ 86.051955] ? _copy_from_iter+0x1b6/0xf20
+[ 86.051955] ? sysvec_apic_timer_interrupt+0x97/0xb0
+[ 86.051955] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
+[ 86.051955] ? mctp_local_output+0x1/0xb7d
+[ 86.051955] mctp_sendmsg+0x64d/0xdb0
+[ 86.051955] ? mctp_sk_close+0x20/0x20
+[ 86.051955] ? __fget_light+0x2fd/0x4f0
+[ 86.051955] ? mctp_sk_close+0x20/0x20
+[ 86.051955] sock_sendmsg+0xdd/0x110
+[ 86.051955] __sys_sendto+0x1cc/0x2a0
+[ 86.051955] ? __ia32_sys_getpeername+0xa0/0xa0
+[ 86.051955] ? new_sync_write+0x335/0x550
+[ 86.051955] ? alloc_file+0x22f/0x500
+[ 86.051955] ? __ip_do_redirect+0x820/0x1820
+[ 86.051955] ? vfs_write+0x44d/0x7b0
+[ 86.051955] ? vfs_write+0x44d/0x7b0
+[ 86.051955] ? fput_many+0x15/0x120
+[ 86.051955] ? ksys_write+0x155/0x1b0
+[ 86.051955] ? __ia32_sys_read+0xa0/0xa0
+[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
+[ 86.051955] ? exit_to_user_mode_prepare+0x2f/0x120
+[ 86.051955] ? syscall_exit_to_user_mode+0x12/0x20
+[ 86.051955] do_syscall_64+0x3a/0x80
+[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
+[ 86.051955] RIP: 0033:0x7f82118a56b3
+[ 86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
+[ 86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3
+[ 86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007
+[ 86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c
+[ 86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0
+[ 86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000
+[ 86.051955] </TASK>
+[ 86.051955]
+[ 86.051955] Allocated by task 295:
+[ 86.051955] kasan_save_stack+0x1c/0x40
+[ 86.051955] __kasan_kmalloc+0x84/0xa0
+[ 86.051955] mctp_rtm_newaddr+0x242/0x610
+[ 86.051955] rtnetlink_rcv_msg+0x2fd/0x8b0
+[ 86.051955] netlink_rcv_skb+0x11c/0x340
+[ 86.051955] netlink_unicast+0x439/0x630
+[ 86.051955] netlink_sendmsg+0x752/0xc00
+[ 86.051955] sock_sendmsg+0xdd/0x110
+[ 86.051955] __sys_sendto+0x1cc/0x2a0
+[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
+[ 86.051955] do_syscall_64+0x3a/0x80
+[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
+[ 86.051955]
+[ 86.051955] Freed by task 301:
+[ 86.051955] kasan_save_stack+0x1c/0x40
+[ 86.051955] kasan_set_track+0x21/0x30
+[ 86.051955] kasan_set_free_info+0x20/0x30
+[ 86.051955] __kasan_slab_free+0x104/0x170
+[ 86.051955] kfree+0x8c/0x290
+[ 86.051955] mctp_dev_notify+0x161/0x2c0
+[ 86.051955] raw_notifier_call_chain+0x8b/0xc0
+[ 86.051955] unregister_netdevice_many+0x299/0x1180
+[ 86.051955] unregister_netdevice_queue+0x210/0x2f0
+[ 86.051955] unregister_netdev+0x13/0x20
+[ 86.051955] mctp_serial_close+0x6d/0xa0
+[ 86.051955] tty_ldisc_kill+0x31/0xa0
+[ 86.051955] tty_ldisc_hangup+0x24f/0x560
+[ 86.051955] __tty_hangup.part.28+0x2ce/0x6b0
+[ 86.051955] tty_release+0x327/0xc70
+[ 86.051955] __fput+0x1df/0x8b0
+[ 86.051955] task_work_run+0xca/0x150
+[ 86.051955] exit_to_user_mode_prepare+0x114/0x120
+[ 86.051955] syscall_exit_to_user_mode+0x12/0x20
+[ 86.051955] do_syscall_64+0x46/0x80
+[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
+[ 86.051955]
+[ 86.051955] The buggy address belongs to the object at ffff888005f298c0
+[ 86.051955] which belongs to the cache kmalloc-8 of size 8
+[ 86.051955] The buggy address is located 0 bytes inside of
+[ 86.051955] 8-byte region [ffff888005f298c0, ffff888005f298c8)
+[ 86.051955]
+[ 86.051955] The buggy address belongs to the physical page:
+[ 86.051955] flags: 0x100000000000200(slab|node=0|zone=1)
+[ 86.051955] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888005c42280
+[ 86.051955] raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000
+[ 86.051955] page dumped because: kasan: bad access detected
+[ 86.051955]
+[ 86.051955] Memory state around the buggy address:
+[ 86.051955] ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
+[ 86.051955] ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc
+[ 86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc
+[ 86.051955] ^
+[ 86.051955] ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
+[ 86.051955] ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
+[ 86.051955] ==================================================================
+
+To this end, just like the commit e04480920d1e ("Bluetooth: defer
+cleanup of resources in hci_unregister_dev()") this patch defers the
+destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put,
+where the refcount of mdev is zero and the entire device is reclaimed.
+This prevents the use-after-free because the sendmsg thread holds the
+reference of mdev in the mctp_route object.
+
+Fixes: 583be982d934 (mctp: Add device handling and netlink interface)
+Signed-off-by: Lin Ma <linma@zju.edu.cn>
+Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
+Link: https://lore.kernel.org/r/20220422114340.32346-1-linma@zju.edu.cn
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/mctp/device.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/net/mctp/device.c b/net/mctp/device.c
+index f86ef6d751bd..9150b9789d25 100644
+--- a/net/mctp/device.c
++++ b/net/mctp/device.c
+@@ -312,6 +312,7 @@ void mctp_dev_hold(struct mctp_dev *mdev)
+ void mctp_dev_put(struct mctp_dev *mdev)
+ {
+ if (mdev && refcount_dec_and_test(&mdev->refs)) {
++ kfree(mdev->addrs);
+ dev_put(mdev->dev);
+ kfree_rcu(mdev, rcu);
+ }
+@@ -440,7 +441,6 @@ static void mctp_unregister(struct net_device *dev)
+
+ mctp_route_remove_dev(mdev);
+ mctp_neigh_remove_dev(mdev);
+- kfree(mdev->addrs);
+
+ mctp_dev_put(mdev);
+ }
+--
+2.35.1
+
--- /dev/null
+From 363c583953518217127f49aaa4ec304be7164386 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 09:05:26 +0200
+Subject: memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
+
+From: Geert Uytterhoeven <geert+renesas@glider.be>
+
+[ Upstream commit 7e842d70fe599bc13594b650b2144c4b6e6d6bf1 ]
+
+HyperFlash devices fail to probe:
+
+ rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
+
+In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
+(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
+from half of the transfer size, cfr. the rpcif_bits_set() helper
+function. However, rpcif_reg_{read,write}() does not take the bus size
+into account, and does not double all Manual Mode Data Register access
+sizes when communicating with a HyperFlash or Octal-SPI Flash device.
+
+Fix this, and avoid the back-and-forth conversion between transfer size
+and Transfer Data Enable bits, by explicitly storing the transfer size
+in struct rpcif, and using that value to determine access size in
+rpcif_reg_{read,write}().
+
+Enforce that the "high" Manual Mode Read/Write Data Registers
+(SM[RW]DR1) are only used for 8-byte data accesses.
+While at it, forbid writing to the Manual Mode Read Data Registers,
+as they are read-only.
+
+Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
+Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
+Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/memory/renesas-rpc-if.c | 60 +++++++++++++++++++++++++--------
+ include/memory/renesas-rpc-if.h | 1 +
+ 2 files changed, 47 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
+index 2e545f473cc6..019a0822bde0 100644
+--- a/drivers/memory/renesas-rpc-if.c
++++ b/drivers/memory/renesas-rpc-if.c
+@@ -164,25 +164,39 @@ static const struct regmap_access_table rpcif_volatile_table = {
+
+
+ /*
+- * Custom accessor functions to ensure SMRDR0 and SMWDR0 are always accessed
+- * with proper width. Requires SMENR_SPIDE to be correctly set before!
++ * Custom accessor functions to ensure SM[RW]DR[01] are always accessed with
++ * proper width. Requires rpcif.xfer_size to be correctly set before!
+ */
+ static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
+ {
+ struct rpcif *rpc = context;
+
+- if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
+- u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
+-
+- if (spide == 0x8) {
++ switch (reg) {
++ case RPCIF_SMRDR0:
++ case RPCIF_SMWDR0:
++ switch (rpc->xfer_size) {
++ case 1:
+ *val = readb(rpc->base + reg);
+ return 0;
+- } else if (spide == 0xC) {
++
++ case 2:
+ *val = readw(rpc->base + reg);
+ return 0;
+- } else if (spide != 0xF) {
++
++ case 4:
++ case 8:
++ *val = readl(rpc->base + reg);
++ return 0;
++
++ default:
+ return -EILSEQ;
+ }
++
++ case RPCIF_SMRDR1:
++ case RPCIF_SMWDR1:
++ if (rpc->xfer_size != 8)
++ return -EILSEQ;
++ break;
+ }
+
+ *val = readl(rpc->base + reg);
+@@ -193,18 +207,34 @@ static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val)
+ {
+ struct rpcif *rpc = context;
+
+- if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
+- u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
+-
+- if (spide == 0x8) {
++ switch (reg) {
++ case RPCIF_SMWDR0:
++ switch (rpc->xfer_size) {
++ case 1:
+ writeb(val, rpc->base + reg);
+ return 0;
+- } else if (spide == 0xC) {
++
++ case 2:
+ writew(val, rpc->base + reg);
+ return 0;
+- } else if (spide != 0xF) {
++
++ case 4:
++ case 8:
++ writel(val, rpc->base + reg);
++ return 0;
++
++ default:
+ return -EILSEQ;
+ }
++
++ case RPCIF_SMWDR1:
++ if (rpc->xfer_size != 8)
++ return -EILSEQ;
++ break;
++
++ case RPCIF_SMRDR0:
++ case RPCIF_SMRDR1:
++ return -EPERM;
+ }
+
+ writel(val, rpc->base + reg);
+@@ -469,6 +499,7 @@ int rpcif_manual_xfer(struct rpcif *rpc)
+
+ smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes));
+ regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
++ rpc->xfer_size = nbytes;
+
+ memcpy(data, rpc->buffer + pos, nbytes);
+ if (nbytes == 8) {
+@@ -533,6 +564,7 @@ int rpcif_manual_xfer(struct rpcif *rpc)
+ regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
+ regmap_write(rpc->regmap, RPCIF_SMCR,
+ rpc->smcr | RPCIF_SMCR_SPIE);
++ rpc->xfer_size = nbytes;
+ ret = wait_msg_xfer_end(rpc);
+ if (ret)
+ goto err_out;
+diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h
+index 7c93f5177532..9c0ad64b8d29 100644
+--- a/include/memory/renesas-rpc-if.h
++++ b/include/memory/renesas-rpc-if.h
+@@ -72,6 +72,7 @@ struct rpcif {
+ enum rpcif_type type;
+ enum rpcif_data_dir dir;
+ u8 bus_size;
++ u8 xfer_size;
+ void *buffer;
+ u32 xferlen;
+ u32 smcr;
+--
+2.35.1
+
--- /dev/null
+From b6afca52eed4d7a81d8abef300685d5af951028a Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 17 Apr 2022 11:46:47 -0700
+Subject: mtd: fix 'part' field data corruption in mtd_info
+
+From: Oleksandr Ocheretnyi <oocheret@cisco.com>
+
+[ Upstream commit 37c5f9e80e015d0df17d0c377c18523002986851 ]
+
+Commit 46b5889cc2c5 ("mtd: implement proper partition handling")
+started using "mtd_get_master_ofs()" in mtd callbacks to determine
+memory offsets by means of 'part' field from mtd_info, what previously
+was smashed accessing 'master' field in the mtd_set_dev_defaults() method.
+That provides wrong offset what causes hardware access errors.
+
+Just make 'part', 'master' as separate fields, rather than using
+union type to avoid 'part' data corruption when mtd_set_dev_defaults()
+is called.
+
+Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
+Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/linux/mtd/mtd.h | 6 ++----
+ 1 file changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
+index 1ffa933121f6..12ed7bb071be 100644
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -392,10 +392,8 @@ struct mtd_info {
+ /* List of partitions attached to this MTD device */
+ struct list_head partitions;
+
+- union {
+- struct mtd_part part;
+- struct mtd_master master;
+- };
++ struct mtd_part part;
++ struct mtd_master master;
+ };
+
+ static inline struct mtd_info *mtd_get_master(struct mtd_info *mtd)
+--
+2.35.1
+
--- /dev/null
+From 18b876849ae996b2cb81639d9ce9738607a21631 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 3 Apr 2022 00:03:13 +0800
+Subject: mtd: rawnand: fix ecc parameters for mt7622
+
+From: Chuanhong Guo <gch981213@gmail.com>
+
+[ Upstream commit 9fe4e0d3cbfe90152137963cc024ecb63db6e8e6 ]
+
+According to the datasheet, mt7622 only has 5 ECC capabilities instead
+of 7, and the decoding error register is arranged as follows:
++------+---------+---------+---------+---------+
+| Bits | 19:15 | 14:10 | 9:5 | 4:0 |
++------+---------+---------+---------+---------+
+| Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 |
++------+---------+---------+---------+---------+
+This means err_mask should be 0x1f instead of 0x3f and the number of
+bits shifted in mtk_ecc_get_stats should be 5 instead of 8.
+
+This commit introduces err_shift for the difference in this register
+and fix other existing parameters.
+
+Public MT7622 reference manual can be found on [0] and the info this
+commit is based on is from page 656 and page 660.
+
+[0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents
+
+Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.")
+Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/mtd/nand/raw/mtk_ecc.c | 12 ++++++++----
+ 1 file changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c
+index 1b47964cb6da..4f6adb657c89 100644
+--- a/drivers/mtd/nand/raw/mtk_ecc.c
++++ b/drivers/mtd/nand/raw/mtk_ecc.c
+@@ -43,6 +43,7 @@
+
+ struct mtk_ecc_caps {
+ u32 err_mask;
++ u32 err_shift;
+ const u8 *ecc_strength;
+ const u32 *ecc_regs;
+ u8 num_ecc_strength;
+@@ -76,7 +77,7 @@ static const u8 ecc_strength_mt2712[] = {
+ };
+
+ static const u8 ecc_strength_mt7622[] = {
+- 4, 6, 8, 10, 12, 14, 16
++ 4, 6, 8, 10, 12
+ };
+
+ enum mtk_ecc_regs {
+@@ -221,7 +222,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
+ for (i = 0; i < sectors; i++) {
+ offset = (i >> 2) << 2;
+ err = readl(ecc->regs + ECC_DECENUM0 + offset);
+- err = err >> ((i % 4) * 8);
++ err = err >> ((i % 4) * ecc->caps->err_shift);
+ err &= ecc->caps->err_mask;
+ if (err == ecc->caps->err_mask) {
+ /* uncorrectable errors */
+@@ -449,6 +450,7 @@ EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
+
+ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+ .err_mask = 0x3f,
++ .err_shift = 8,
+ .ecc_strength = ecc_strength_mt2701,
+ .ecc_regs = mt2701_ecc_regs,
+ .num_ecc_strength = 20,
+@@ -459,6 +461,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+
+ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+ .err_mask = 0x7f,
++ .err_shift = 8,
+ .ecc_strength = ecc_strength_mt2712,
+ .ecc_regs = mt2712_ecc_regs,
+ .num_ecc_strength = 23,
+@@ -468,10 +471,11 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+ };
+
+ static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
+- .err_mask = 0x3f,
++ .err_mask = 0x1f,
++ .err_shift = 5,
+ .ecc_strength = ecc_strength_mt7622,
+ .ecc_regs = mt7622_ecc_regs,
+- .num_ecc_strength = 7,
++ .num_ecc_strength = 5,
+ .ecc_mode_shift = 4,
+ .parity_bits = 13,
+ .pg_irq_sel = 0,
+--
+2.35.1
+
--- /dev/null
+From 5e4a2e9797cec89d4e05915b95359f1491ea6768 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 12 Apr 2022 08:34:31 +0000
+Subject: mtd: rawnand: Fix return value check of wait_for_completion_timeout
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ]
+
+wait_for_completion_timeout() returns unsigned long not int.
+It returns 0 if timed out, and positive if completed.
+The check for <= 0 is ambiguous and should be == 0 here
+indicating timeout which is the only error case.
+
+Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/mtd/nand/raw/sh_flctl.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
+index 13df4bdf792a..8f89e2d3d817 100644
+--- a/drivers/mtd/nand/raw/sh_flctl.c
++++ b/drivers/mtd/nand/raw/sh_flctl.c
+@@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+ dma_addr_t dma_addr;
+ dma_cookie_t cookie;
+ uint32_t reg;
+- int ret;
++ int ret = 0;
++ unsigned long time_left;
+
+ if (dir == DMA_FROM_DEVICE) {
+ chan = flctl->chan_fifo0_rx;
+@@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+ goto out;
+ }
+
+- ret =
++ time_left =
+ wait_for_completion_timeout(&flctl->dma_complete,
+ msecs_to_jiffies(3000));
+
+- if (ret <= 0) {
++ if (time_left == 0) {
+ dmaengine_terminate_all(chan);
+ dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
++ ret = -ETIMEDOUT;
+ }
+
+ out:
+@@ -441,7 +443,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+
+ dma_unmap_single(chan->device->dev, dma_addr, len, dir);
+
+- /* ret > 0 is success */
++ /* ret == 0 is success */
+ return ret;
+ }
+
+@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_rx && rlen >= 32 &&
+- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
++ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
+ goto convert; /* DMA success */
+
+ /* do polling transfer */
+@@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_tx && rlen >= 32 &&
+- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
++ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
+ return; /* DMA success */
+
+ /* do polling transfer */
+--
+2.35.1
+
--- /dev/null
+From c035b9ecccb11e479d62563575e74b3541499aa0 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 09:53:07 -0700
+Subject: net: bcmgenet: hide status block before TX timestamping
+
+From: Jonathan Lemon <jonathan.lemon@gmail.com>
+
+[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ]
+
+The hardware checksum offloading requires use of a transmit
+status block inserted before the outgoing frame data, this was
+updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'
+
+However, skb_tx_timestamp() assumes that it is passed a raw frame
+and PTP parsing chokes on this status block.
+
+Fix this by calling __skb_pull(), which hides the TSB before calling
+skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
+
+As the data in the skb has already been set up for DMA, and the
+dma_unmap_* calls use a separately stored address, there is no
+no effective change in the data transmission.
+
+Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
+Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call")
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+index 2da804f84b48..c2bfb25e087c 100644
+--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
++++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+@@ -2035,6 +2035,11 @@ static struct sk_buff *bcmgenet_add_tsb(struct net_device *dev,
+ return skb;
+ }
+
++static void bcmgenet_hide_tsb(struct sk_buff *skb)
++{
++ __skb_pull(skb, sizeof(struct status_64));
++}
++
+ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+ struct bcmgenet_priv *priv = netdev_priv(dev);
+@@ -2141,6 +2146,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
+ }
+
+ GENET_CB(skb)->last_cb = tx_cb_ptr;
++
++ bcmgenet_hide_tsb(skb);
+ skb_tx_timestamp(skb);
+
+ /* Decrement total BD count and advance our write pointer */
+--
+2.35.1
+
--- /dev/null
+From 0eb9ef0fa529b3586e64d1d0f70f5791da0ec4b2 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 19:04:08 +0800
+Subject: net: dsa: Add missing of_node_put() in dsa_port_link_register_of
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit fc06b2867f4cea543505acfb194c2be4ebf0c7d3 ]
+
+The device_node pointer is returned by of_parse_phandle() with refcount
+incremented. We should use of_node_put() on it when done.
+of_node_put() will check for NULL value.
+
+Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/dsa/port.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/net/dsa/port.c b/net/dsa/port.c
+index 1a40c52f5a42..4368fd32c4a5 100644
+--- a/net/dsa/port.c
++++ b/net/dsa/port.c
+@@ -1240,8 +1240,10 @@ int dsa_port_link_register_of(struct dsa_port *dp)
+ if (ds->ops->phylink_mac_link_down)
+ ds->ops->phylink_mac_link_down(ds, port,
+ MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
++ of_node_put(phy_np);
+ return dsa_port_phylink_register(dp);
+ }
++ of_node_put(phy_np);
+ return 0;
+ }
+
+--
+2.35.1
+
--- /dev/null
+From 358d0b6e5e4c5783437e25f53ab7841179a7f4e1 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 25 Apr 2022 17:20:27 +0200
+Subject: net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
+
+From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ]
+
+Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
+GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
+register. It helped bring this register into a well-defined state so the
+driver has to rely less on the bootloader to do things right.
+Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
+possibility to configure it. Upon further testing it turns out that all
+boards which are supported by the GSWIP driver in OpenWrt which use an
+RMII PHY have a dedicated oscillator on the board which provides the
+50MHz RMII reference clock.
+
+Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
+clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
+a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
+the MAC also generates the RMII reference clock whose signal then
+conflicts with the signal from the oscillator on the board. This results
+in a constant cycle of the PHY detecting link up/down (and as a result
+of that: the two ports using the AR8030 PHYs are not working).
+
+At the time of writing this patch there's no known board where the MAC
+(GSWIP) has to generate the RMII reference clock. If needed this can be
+implemented in future by providing a device-tree flag so the
+GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
+
+Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
+Tested-by: Jan Hoffmann <jan@3e8.eu>
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ---
+ 1 file changed, 3 deletions(-)
+
+diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
+index 8a7a8093a156..8acec33a4702 100644
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1637,9 +1637,6 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
+-
+- /* Configure the RMII clock as output: */
+- miicfg |= GSWIP_MII_CFG_RMII_CLK;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+--
+2.35.1
+
--- /dev/null
+From fe48e7d41685ddc4ab78a6d7130e35d73fae292e Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 25 Apr 2022 07:04:54 +0000
+Subject: net: dsa: mv88e6xxx: Fix port_hidden_wait to account for
+ port_base_addr
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Nathan Rossi <nathan@nathanrossi.com>
+
+[ Upstream commit 24cbdb910bb62b5be3865275e5682be1a7708c0f ]
+
+The other port_hidden functions rely on the port_read/port_write
+functions to access the hidden control port. These functions apply the
+offset for port_base_addr where applicable. Update port_hidden_wait to
+use the port_wait_bit so that port_base_addr offsets are accounted for
+when waiting for the busy bit to change.
+
+Without the offset the port_hidden_wait function would timeout on
+devices that have a non-zero port_base_addr (e.g. MV88E6141), however
+devices that have a zero port_base_addr would operate correctly (e.g.
+MV88E6390).
+
+Fixes: 609070133aff ("net: dsa: mv88e6xxx: update code operating on hidden registers")
+Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
+Reviewed-by: Marek Behún <kabel@kernel.org>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/dsa/mv88e6xxx/port_hidden.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/dsa/mv88e6xxx/port_hidden.c b/drivers/net/dsa/mv88e6xxx/port_hidden.c
+index b49d05f0e117..7a9f9ff6dedf 100644
+--- a/drivers/net/dsa/mv88e6xxx/port_hidden.c
++++ b/drivers/net/dsa/mv88e6xxx/port_hidden.c
+@@ -40,8 +40,9 @@ int mv88e6xxx_port_hidden_wait(struct mv88e6xxx_chip *chip)
+ {
+ int bit = __bf_shf(MV88E6XXX_PORT_RESERVED_1A_BUSY);
+
+- return mv88e6xxx_wait_bit(chip, MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT,
+- MV88E6XXX_PORT_RESERVED_1A, bit, 0);
++ return mv88e6xxx_port_wait_bit(chip,
++ MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT,
++ MV88E6XXX_PORT_RESERVED_1A, bit, 0);
+ }
+
+ int mv88e6xxx_port_hidden_read(struct mv88e6xxx_chip *chip, int block, int port,
+--
+2.35.1
+
--- /dev/null
+From 2b69475a87c5ee3926672b66a76f5f978c967cb9 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 27 Apr 2022 23:30:17 +0300
+Subject: net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
+
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+
+[ Upstream commit 66a2f5ef68faaf950746747d790a0c95f7ec96d2 ]
+
+The Time-Specified Departure feature is indeed mutually exclusive with
+TX IP checksumming in ENETC, but TX checksumming in itself is broken and
+was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx
+checksumming offload code").
+
+The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply
+with software TSO's expectations, and still did the checksumming in
+software by calling skb_checksum_help(). So there isn't any restriction
+for the Time-Specified Departure feature.
+
+However, enetc_setup_tc_txtime() doesn't understand that, and blindly
+looks for NETIF_F_CSUM_MASK.
+
+Instead of checking for things which can literally never happen in the
+current code base, just remove the check and let the driver offload
+tc-etf qdiscs.
+
+Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software")
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/freescale/enetc/enetc_qos.c | 4 ----
+ 1 file changed, 4 deletions(-)
+
+diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+index d3d7172e0fcc..3b148d4e0f0c 100644
+--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
++++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+@@ -308,10 +308,6 @@ int enetc_setup_tc_txtime(struct net_device *ndev, void *type_data)
+ if (tc < 0 || tc >= priv->num_tx_rings)
+ return -EINVAL;
+
+- /* Do not support TXSTART and TX CSUM offload simutaniously */
+- if (ndev->features & NETIF_F_CSUM_MASK)
+- return -EBUSY;
+-
+ /* TSD and Qbv are mutually exclusive in hardware */
+ if (enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET) & ENETC_QBV_TGE)
+ return -EBUSY;
+--
+2.35.1
+
--- /dev/null
+From f916333fecef363335078c321373dbbbc2f224a8 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 26 Apr 2022 20:52:31 +0800
+Subject: net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
+
+From: Yang Yingliang <yangyingliang@huawei.com>
+
+[ Upstream commit d2b52ec056d5bddb055c8f21d7489a23548d0838 ]
+
+Put device node in error path in fec_enet_init_stop_mode().
+
+Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT")
+Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
+Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/freescale/fec_main.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
+index 796133de527e..870919c66518 100644
+--- a/drivers/net/ethernet/freescale/fec_main.c
++++ b/drivers/net/ethernet/freescale/fec_main.c
+@@ -3731,7 +3731,7 @@ static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
+ ARRAY_SIZE(out_val));
+ if (ret) {
+ dev_dbg(&fep->pdev->dev, "no stop mode property\n");
+- return ret;
++ goto out;
+ }
+
+ fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
+--
+2.35.1
+
--- /dev/null
+From dd0748c20dc2529fe6d3f1f32b0dabc123dd60d8 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 20:57:25 +0800
+Subject: net: hns3: add return value for mailbox handling in PF
+
+From: Jian Shen <shenjian15@huawei.com>
+
+[ Upstream commit c59d606296842409a6e5a4828235b0bd46b12bc4 ]
+
+Currently, there are some querying mailboxes sent from VF to PF,
+and VF will wait the PF's handling result. For mailbox
+HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
+when the input parameter is invalid, but the prototype of their
+handler function is void. In this case, PF always return success
+to VF, which may cause the VF get incorrect result.
+
+Fixes it by adding return value for these function.
+
+Fixes: 63b1279d9905 ("net: hns3: check queue id range before using")
+Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()")
+Signed-off-by: Jian Shen <shenjian15@huawei.com>
+Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ .../hisilicon/hns3/hns3pf/hclge_mbx.c | 22 ++++++++++---------
+ 1 file changed, 12 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+index 53f939923c28..7998ca617a92 100644
+--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
++++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+@@ -594,9 +594,9 @@ static int hclge_set_vf_mtu(struct hclge_vport *vport,
+ return hclge_set_vport_mtu(vport, mtu);
+ }
+
+-static void hclge_get_queue_id_in_pf(struct hclge_vport *vport,
+- struct hclge_mbx_vf_to_pf_cmd *mbx_req,
+- struct hclge_respond_to_vf_msg *resp_msg)
++static int hclge_get_queue_id_in_pf(struct hclge_vport *vport,
++ struct hclge_mbx_vf_to_pf_cmd *mbx_req,
++ struct hclge_respond_to_vf_msg *resp_msg)
+ {
+ struct hnae3_handle *handle = &vport->nic;
+ struct hclge_dev *hdev = vport->back;
+@@ -606,17 +606,18 @@ static void hclge_get_queue_id_in_pf(struct hclge_vport *vport,
+ if (queue_id >= handle->kinfo.num_tqps) {
+ dev_err(&hdev->pdev->dev, "Invalid queue id(%u) from VF %u\n",
+ queue_id, mbx_req->mbx_src_vfid);
+- return;
++ return -EINVAL;
+ }
+
+ qid_in_pf = hclge_covert_handle_qid_global(&vport->nic, queue_id);
+ memcpy(resp_msg->data, &qid_in_pf, sizeof(qid_in_pf));
+ resp_msg->len = sizeof(qid_in_pf);
++ return 0;
+ }
+
+-static void hclge_get_rss_key(struct hclge_vport *vport,
+- struct hclge_mbx_vf_to_pf_cmd *mbx_req,
+- struct hclge_respond_to_vf_msg *resp_msg)
++static int hclge_get_rss_key(struct hclge_vport *vport,
++ struct hclge_mbx_vf_to_pf_cmd *mbx_req,
++ struct hclge_respond_to_vf_msg *resp_msg)
+ {
+ #define HCLGE_RSS_MBX_RESP_LEN 8
+ struct hclge_dev *hdev = vport->back;
+@@ -634,13 +635,14 @@ static void hclge_get_rss_key(struct hclge_vport *vport,
+ dev_warn(&hdev->pdev->dev,
+ "failed to get the rss hash key, the index(%u) invalid !\n",
+ index);
+- return;
++ return -EINVAL;
+ }
+
+ memcpy(resp_msg->data,
+ &rss_cfg->rss_hash_key[index * HCLGE_RSS_MBX_RESP_LEN],
+ HCLGE_RSS_MBX_RESP_LEN);
+ resp_msg->len = HCLGE_RSS_MBX_RESP_LEN;
++ return 0;
+ }
+
+ static void hclge_link_fail_parse(struct hclge_dev *hdev, u8 link_fail_code)
+@@ -816,10 +818,10 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
+ "VF fail(%d) to set mtu\n", ret);
+ break;
+ case HCLGE_MBX_GET_QID_IN_PF:
+- hclge_get_queue_id_in_pf(vport, req, &resp_msg);
++ ret = hclge_get_queue_id_in_pf(vport, req, &resp_msg);
+ break;
+ case HCLGE_MBX_GET_RSS_KEY:
+- hclge_get_rss_key(vport, req, &resp_msg);
++ ret = hclge_get_rss_key(vport, req, &resp_msg);
+ break;
+ case HCLGE_MBX_GET_LINK_MODE:
+ hclge_get_link_mode(vport, req);
+--
+2.35.1
+
--- /dev/null
+From 0e40fcbef050be0f1ef089caa3f9020ff227f415 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 20:57:24 +0800
+Subject: net: hns3: add validity check for message data length
+
+From: Jian Shen <shenjian15@huawei.com>
+
+[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ]
+
+Add validity check for message data length in function
+hclge_send_mbx_msg(), avoid unexpected overflow.
+
+Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
+Signed-off-by: Jian Shen <shenjian15@huawei.com>
+Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+index 36cbafc5f944..53f939923c28 100644
+--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
++++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+@@ -94,6 +94,13 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
+ enum hclge_comm_cmd_status status;
+ struct hclge_desc desc;
+
++ if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) {
++ dev_err(&hdev->pdev->dev,
++ "msg data length(=%u) exceeds maximum(=%u)\n",
++ msg_len, HCLGE_MBX_MAX_MSG_SIZE);
++ return -EMSGSIZE;
++ }
++
+ resp_pf_to_vf = (struct hclge_mbx_pf_to_vf_cmd *)desc.data;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_PF_TO_VF, false);
+--
+2.35.1
+
--- /dev/null
+From 09f22e3f4654f1dccd5138b3730928dd19cc0006 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 20:57:20 +0800
+Subject: net: hns3: clear inited state and stop client after failed to
+ register netdev
+
+From: Jian Shen <shenjian15@huawei.com>
+
+[ Upstream commit e98365afc1e94ea1609268866a44112b3572c58b ]
+
+If failed to register netdev, it needs to clear INITED state and stop
+client in case of cause problem when concurrency with uninitialized
+process of driver.
+
+Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete")
+Signed-off-by: Jian Shen <shenjian15@huawei.com>
+Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+index f6082be7481c..f33b4c351a70 100644
+--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
++++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+@@ -5132,6 +5132,13 @@ static void hns3_state_init(struct hnae3_handle *handle)
+ set_bit(HNS3_NIC_STATE_RXD_ADV_LAYOUT_ENABLE, &priv->state);
+ }
+
++static void hns3_state_uninit(struct hnae3_handle *handle)
++{
++ struct hns3_nic_priv *priv = handle->priv;
++
++ clear_bit(HNS3_NIC_STATE_INITED, &priv->state);
++}
++
+ static int hns3_client_init(struct hnae3_handle *handle)
+ {
+ struct pci_dev *pdev = handle->pdev;
+@@ -5249,7 +5256,9 @@ static int hns3_client_init(struct hnae3_handle *handle)
+ return ret;
+
+ out_reg_netdev_fail:
++ hns3_state_uninit(handle);
+ hns3_dbg_uninit(handle);
++ hns3_client_stop(handle);
+ out_client_start:
+ hns3_free_rx_cpu_rmap(netdev);
+ hns3_nic_uninit_irq(priv);
+--
+2.35.1
+
--- /dev/null
+From 4bb9d1be13c5c343ebe86e082a92bf0f9c794305 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 20:57:22 +0800
+Subject: net: hns3: fix error log of tx/rx tqps stats
+
+From: Peng Li <lipeng321@huawei.com>
+
+[ Upstream commit 123521b6b260d901937d3fb598ab88d260c857a6 ]
+
+The comments in function hclge_comm_tqps_update_stats is not right,
+so fix it.
+
+Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
+Signed-off-by: Peng Li <lipeng321@huawei.com>
+Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ .../hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c
+index 0c60f41fca8a..f3c9395d8351 100644
+--- a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c
++++ b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c
+@@ -75,7 +75,7 @@ int hclge_comm_tqps_update_stats(struct hnae3_handle *handle,
+ ret = hclge_comm_cmd_send(hw, &desc, 1);
+ if (ret) {
+ dev_err(&hw->cmq.csq.pdev->dev,
+- "failed to get tqp stat, ret = %d, tx = %u.\n",
++ "failed to get tqp stat, ret = %d, rx = %u.\n",
+ ret, i);
+ return ret;
+ }
+@@ -89,7 +89,7 @@ int hclge_comm_tqps_update_stats(struct hnae3_handle *handle,
+ ret = hclge_comm_cmd_send(hw, &desc, 1);
+ if (ret) {
+ dev_err(&hw->cmq.csq.pdev->dev,
+- "failed to get tqp stat, ret = %d, rx = %u.\n",
++ "failed to get tqp stat, ret = %d, tx = %u.\n",
+ ret, i);
+ return ret;
+ }
+--
+2.35.1
+
--- /dev/null
+From a5cb55dd453b7c8772f1112d96a34b8989fcea9d Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 20:57:23 +0800
+Subject: net: hns3: modify the return code of hclge_get_ring_chain_from_mbx
+
+From: Jie Wang <wangjie125@huawei.com>
+
+[ Upstream commit 48009e9972974c52a5f649f761862dd67bce3d13 ]
+
+Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
+ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
+return -EINVAL for the invalid parameter case.
+
+So this patch fixes it by return -EINVAL in this abnormal branch.
+
+Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning")
+Signed-off-by: Jie Wang <wangjie125@huawei.com>
+Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+index 6799d16de34b..36cbafc5f944 100644
+--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
++++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+@@ -176,7 +176,7 @@ static int hclge_get_ring_chain_from_mbx(
+ ring_num = req->msg.ring_num;
+
+ if (ring_num > HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM)
+- return -ENOMEM;
++ return -EINVAL;
+
+ for (i = 0; i < ring_num; i++) {
+ if (req->msg.param[i].tqp_index >= vport->nic.kinfo.rss_size) {
+--
+2.35.1
+
--- /dev/null
+From 869be75f7806f6bca870502025a967c846134bf3 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 18:46:13 +0300
+Subject: net: lan966x: fix a couple off by one bugs
+
+From: Dan Carpenter <dan.carpenter@oracle.com>
+
+[ Upstream commit 9810c58c7051ae83e7ac326fca3daa823da6b778 ]
+
+The lan966x->ports[] array has lan966x->num_phys_ports elements. These
+are assigned in lan966x_probe(). That means the > comparison should be
+changed to >=.
+
+The first off by one check is harmless but the second one could lead to
+an out of bounds access and a crash.
+
+Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer")
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/microchip/lan966x/lan966x_mac.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_mac.c b/drivers/net/ethernet/microchip/lan966x/lan966x_mac.c
+index 2679111ef669..005e56ea5da1 100644
+--- a/drivers/net/ethernet/microchip/lan966x/lan966x_mac.c
++++ b/drivers/net/ethernet/microchip/lan966x/lan966x_mac.c
+@@ -346,7 +346,7 @@ static void lan966x_mac_irq_process(struct lan966x *lan966x, u32 row,
+
+ lan966x_mac_process_raw_entry(&raw_entries[column],
+ mac, &vid, &dest_idx);
+- if (WARN_ON(dest_idx > lan966x->num_phys_ports))
++ if (WARN_ON(dest_idx >= lan966x->num_phys_ports))
+ continue;
+
+ /* If the entry in SW is found, then there is nothing
+@@ -393,7 +393,7 @@ static void lan966x_mac_irq_process(struct lan966x *lan966x, u32 row,
+
+ lan966x_mac_process_raw_entry(&raw_entries[column],
+ mac, &vid, &dest_idx);
+- if (WARN_ON(dest_idx > lan966x->num_phys_ports))
++ if (WARN_ON(dest_idx >= lan966x->num_phys_ports))
+ continue;
+
+ mac_entry = lan966x_mac_alloc_entry(mac, vid, dest_idx);
+--
+2.35.1
+
--- /dev/null
+From 07ad05aa5800c46bfd2193c1f778d68489090d9b Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 25 Apr 2022 09:27:38 +0300
+Subject: net: phy: marvell10g: fix return value on error
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Baruch Siach <baruch.siach@siklu.com>
+
+[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ]
+
+Return back the error value that we get from phy_read_mmd().
+
+Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1")
+Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
+Reviewed-by: Marek Behún <kabel@kernel.org>
+Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/phy/marvell10g.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
+index b6fea119fe13..2b7d0720720b 100644
+--- a/drivers/net/phy/marvell10g.c
++++ b/drivers/net/phy/marvell10g.c
+@@ -880,7 +880,7 @@ static int mv3310_read_status_copper(struct phy_device *phydev)
+
+ cssr1 = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSSR1);
+ if (cssr1 < 0)
+- return val;
++ return cssr1;
+
+ /* If the link settings are not resolved, mark the link down */
+ if (!(cssr1 & MV_PCS_CSSR1_RESOLVED)) {
+--
+2.35.1
+
--- /dev/null
+From cd9e669cdb8d92a27e70135d5487629d6791be9c Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 17:40:27 +0800
+Subject: net/smc: sync err code when tcp connection was refused
+
+From: liuyacan <liuyacan@corp.netease.com>
+
+[ Upstream commit 4e2e65e2e56c6ceb4ea1719360080c0af083229e ]
+
+In the current implementation, when TCP initiates a connection
+to an unavailable [ip,port], ECONNREFUSED will be stored in the
+TCP socket, but SMC will not. However, some apps (like curl) use
+getsockopt(,,SO_ERROR,,) to get the error information, which makes
+them miss the error message and behave strangely.
+
+Fixes: 50717a37db03 ("net/smc: nonblocking connect rework")
+Signed-off-by: liuyacan <liuyacan@corp.netease.com>
+Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
+Acked-by: Karsten Graul <kgraul@linux.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/smc/af_smc.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
+index 68cd110722a4..fd9d9cfd0f3d 100644
+--- a/net/smc/af_smc.c
++++ b/net/smc/af_smc.c
+@@ -1357,6 +1357,8 @@ static void smc_connect_work(struct work_struct *work)
+ smc->sk.sk_state = SMC_CLOSED;
+ if (rc == -EPIPE || rc == -EAGAIN)
+ smc->sk.sk_err = EPIPE;
++ else if (rc == -ECONNREFUSED)
++ smc->sk.sk_err = ECONNREFUSED;
+ else if (signal_pending(current))
+ smc->sk.sk_err = -sock_intr_errno(timeo);
+ sock_put(&smc->sk); /* passive closing */
+--
+2.35.1
+
--- /dev/null
+From 0dd5c7bd79fc3b19d458cec194a9cd4e727c3599 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 27 Apr 2022 14:09:00 +0300
+Subject: netfilter: conntrack: fix udp offload timeout sysctl
+
+From: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
+
+[ Upstream commit 626873c446f7559d5af8b48cefad903ffd85cf4e ]
+
+`nf_flowtable_udp_timeout` sysctl option is available only
+if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow
+offload UDP timeout was added under CONFIG_NF_FLOW_TABLE
+config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD
+disabled and CONFIG_NF_FLOW_TABLE enabled, the
+`nf_flowtable_udp_timeout` is not present in sysfs.
+Please note, that TCP flow offload timeout sysctl option
+is present even CONFIG_NFT_FLOW_OFFLOAD is disabled.
+
+I suppose it was a typo in commit that adds UDP flow offload
+timeout and CONFIG_NF_FLOW_TABLE should be used instead.
+
+Fixes: 975c57504da1 ("netfilter: conntrack: Introduce udp offload timeout configuration")
+Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/netfilter/nf_conntrack_standalone.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
+index 3e1afd10a9b6..55aa55b252b2 100644
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -823,7 +823,7 @@ static struct ctl_table nf_ct_sysctl_table[] = {
+ .mode = 0644,
+ .proc_handler = proc_dointvec_jiffies,
+ },
+-#if IS_ENABLED(CONFIG_NFT_FLOW_OFFLOAD)
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
+ [NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD] = {
+ .procname = "nf_flowtable_udp_timeout",
+ .maxlen = sizeof(unsigned int),
+--
+2.35.1
+
--- /dev/null
+From fc402e572f9d62c9e7eea784056396a123d99d57 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 25 Apr 2022 11:47:11 +0200
+Subject: netfilter: nf_conntrack_tcp: re-init for syn packets only
+
+From: Florian Westphal <fw@strlen.de>
+
+[ Upstream commit c7aab4f17021b636a0ee75bcf28e06fb7c94ab48 ]
+
+Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell
+pinpointed to nf_conntrack tcp_in_window() bug.
+
+tcp trace shows following sequence:
+
+I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]>
+R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..]
+R > I Flags [P.], seq 1:89, ack 1, [..]
+
+Note 3rd ACK is from responder to initiator so following branch is taken:
+ } else if (((state->state == TCP_CONNTRACK_SYN_SENT
+ && dir == IP_CT_DIR_ORIGINAL)
+ || (state->state == TCP_CONNTRACK_SYN_RECV
+ && dir == IP_CT_DIR_REPLY))
+ && after(end, sender->td_end)) {
+
+... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY.
+This causes the scaling factor to be reset to 0: window scale option
+is only present in syn(ack) packets. This in turn makes nf_conntrack
+mark valid packets as out-of-window.
+
+This was always broken, it exists even in original commit where
+window tracking was added to ip_conntrack (nf_conntrack predecessor)
+in 2.6.9-rc1 kernel.
+
+Restrict to 'tcph->syn', just like the 3rd condtional added in
+commit 82b72cb94666 ("netfilter: conntrack: re-init state for retransmitted syn-ack").
+
+Upon closer look, those conditionals/branches can be merged:
+
+Because earlier checks prevent syn-ack from showing up in
+original direction, the 'dir' checks in the conditional quoted above are
+redundant, remove them. Return early for pure syn retransmitted in reply
+direction (simultaneous open).
+
+Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
+Reported-by: Jaco Kroon <jaco@uls.co.za>
+Signed-off-by: Florian Westphal <fw@strlen.de>
+Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/netfilter/nf_conntrack_proto_tcp.c | 21 ++++++---------------
+ 1 file changed, 6 insertions(+), 15 deletions(-)
+
+diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
+index 8ec55cd72572..204a5cdff5b1 100644
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -556,24 +556,14 @@ static bool tcp_in_window(struct nf_conn *ct,
+ }
+
+ }
+- } else if (((state->state == TCP_CONNTRACK_SYN_SENT
+- && dir == IP_CT_DIR_ORIGINAL)
+- || (state->state == TCP_CONNTRACK_SYN_RECV
+- && dir == IP_CT_DIR_REPLY))
+- && after(end, sender->td_end)) {
++ } else if (tcph->syn &&
++ after(end, sender->td_end) &&
++ (state->state == TCP_CONNTRACK_SYN_SENT ||
++ state->state == TCP_CONNTRACK_SYN_RECV)) {
+ /*
+ * RFC 793: "if a TCP is reinitialized ... then it need
+ * not wait at all; it must only be sure to use sequence
+ * numbers larger than those recently used."
+- */
+- sender->td_end =
+- sender->td_maxend = end;
+- sender->td_maxwin = (win == 0 ? 1 : win);
+-
+- tcp_options(skb, dataoff, tcph, sender);
+- } else if (tcph->syn && dir == IP_CT_DIR_REPLY &&
+- state->state == TCP_CONNTRACK_SYN_SENT) {
+- /* Retransmitted syn-ack, or syn (simultaneous open).
+ *
+ * Re-init state for this direction, just like for the first
+ * syn(-ack) reply, it might differ in seq, ack or tcp options.
+@@ -581,7 +571,8 @@ static bool tcp_in_window(struct nf_conn *ct,
+ tcp_init_sender(sender, receiver,
+ skb, dataoff, tcph,
+ end, win);
+- if (!tcph->ack)
++
++ if (dir == IP_CT_DIR_REPLY && !tcph->ack)
+ return true;
+ }
+
+--
+2.35.1
+
--- /dev/null
+From 0910e7bff39538e2d1f55ad782085abf797d919a Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Mon, 18 Apr 2022 12:21:05 +0200
+Subject: netfilter: nft_set_rbtree: overlap detection with element re-addition
+ after deletion
+
+From: Pablo Neira Ayuso <pablo@netfilter.org>
+
+[ Upstream commit babc3dc9524f0bcb5a0ec61f3c3639b11508fad6 ]
+
+This patch fixes spurious EEXIST errors.
+
+Extend d2df92e98a34 ("netfilter: nft_set_rbtree: handle element
+re-addition after deletion") to deal with elements with same end flags
+in the same transation.
+
+Reset the overlap flag as described by 7c84d41416d8 ("netfilter:
+nft_set_rbtree: Detect partial overlaps on insertion").
+
+Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
+Fixes: d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion")
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/netfilter/nft_set_rbtree.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
+index d600a566da32..7325bee7d144 100644
+--- a/net/netfilter/nft_set_rbtree.c
++++ b/net/netfilter/nft_set_rbtree.c
+@@ -349,7 +349,11 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
+ *ext = &rbe->ext;
+ return -EEXIST;
+ } else {
+- p = &parent->rb_left;
++ overlap = false;
++ if (nft_rbtree_interval_end(rbe))
++ p = &parent->rb_left;
++ else
++ p = &parent->rb_right;
+ }
+ }
+
+--
+2.35.1
+
--- /dev/null
+From b31d1c8847017e82560c6c806098e7970a13ac61 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 17:52:03 +0100
+Subject: perf arm-spe: Fix addresses of synthesized SPE events
+
+From: Timothy Hayes <timothy.hayes@arm.com>
+
+[ Upstream commit 4e13f6706d5aee1a6b835a44f6cf4971a921dcb8 ]
+
+This patch corrects a bug whereby synthesized events from SPE
+samples are missing virtual addresses.
+
+Fixes: 54f7815efef7fad9 ("perf arm-spe: Fill address info for samples")
+Reviewed-by: Leo Yan <leo.yan@linaro.org>
+Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
+Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Cc: bpf@vger.kernel.org
+Cc: Jiri Olsa <jolsa@kernel.org>
+Cc: John Fastabend <john.fastabend@gmail.com>
+Cc: John Garry <john.garry@huawei.com>
+Cc: KP Singh <kpsingh@kernel.org>
+Cc: Leo Yan <leo.yan@linaro.org>
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Mark Rutland <mark.rutland@arm.com>
+Cc: Martin KaFai Lau <kafai@fb.com>
+Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
+Cc: Namhyung Kim <namhyung@kernel.org>
+Cc: netdev@vger.kernel.org
+Cc: Song Liu <songliubraving@fb.com>
+Cc: Will Deacon <will@kernel.org>
+Cc: Yonghong Song <yhs@fb.com>
+Link: https://lore.kernel.org/r/20220421165205.117662-2-timothy.hayes@arm.com
+Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/perf/util/arm-spe.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
+index d2b64e3f588b..151cc38a171c 100644
+--- a/tools/perf/util/arm-spe.c
++++ b/tools/perf/util/arm-spe.c
+@@ -1036,7 +1036,7 @@ arm_spe_synth_events(struct arm_spe *spe, struct perf_session *session)
+ attr.sample_type = evsel->core.attr.sample_type & PERF_SAMPLE_MASK;
+ attr.sample_type |= PERF_SAMPLE_IP | PERF_SAMPLE_TID |
+ PERF_SAMPLE_PERIOD | PERF_SAMPLE_DATA_SRC |
+- PERF_SAMPLE_WEIGHT;
++ PERF_SAMPLE_WEIGHT | PERF_SAMPLE_ADDR;
+ if (spe->timeless_decoding)
+ attr.sample_type &= ~(u64)PERF_SAMPLE_TIME;
+ else
+--
+2.35.1
+
--- /dev/null
+From 14cff6577afde6a69d5d22e813eb2c480e0f9e52 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 15 Apr 2022 16:03:10 +0200
+Subject: phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()
+
+From: Heiner Kallweit <hkallweit1@gmail.com>
+
+[ Upstream commit 2c8045d48dee703ad8eab2be7d6547765a89c069 ]
+
+If clk_prepare_enable() fails we call clk_disable_unprepare()
+in the error path what results in a warning that the clock
+is disabled and unprepared already.
+And if we fail later in phy_g12a_usb3_pcie_probe() then we
+bail out w/o calling clk_disable_unprepare().
+This patch fixes both errors.
+
+Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ .../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 20 +++++++++++--------
+ 1 file changed, 12 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+index 5b471ab80fe2..54d65a6f0fcc 100644
+--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
++++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+@@ -414,19 +414,19 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
+
+ ret = clk_prepare_enable(priv->clk_ref);
+ if (ret)
+- goto err_disable_clk_ref;
++ return ret;
+
+ priv->reset = devm_reset_control_array_get_exclusive(dev);
+- if (IS_ERR(priv->reset))
+- return PTR_ERR(priv->reset);
++ if (IS_ERR(priv->reset)) {
++ ret = PTR_ERR(priv->reset);
++ goto err_disable_clk_ref;
++ }
+
+ priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
+ if (IS_ERR(priv->phy)) {
+ ret = PTR_ERR(priv->phy);
+- if (ret != -EPROBE_DEFER)
+- dev_err(dev, "failed to create PHY\n");
+-
+- return ret;
++ dev_err_probe(dev, ret, "failed to create PHY\n");
++ goto err_disable_clk_ref;
+ }
+
+ phy_set_drvdata(priv->phy, priv);
+@@ -434,8 +434,12 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ phy_g12a_usb3_pcie_xlate);
++ if (IS_ERR(phy_provider)) {
++ ret = PTR_ERR(phy_provider);
++ goto err_disable_clk_ref;
++ }
+
+- return PTR_ERR_OR_ZERO(phy_provider);
++ return 0;
+
+ err_disable_clk_ref:
+ clk_disable_unprepare(priv->clk_ref);
+--
+2.35.1
+
--- /dev/null
+From 922ca306081965143afc7b3cb008a7ef970445e4 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 1 Mar 2022 02:46:11 +0000
+Subject: phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]
+
+The pm_runtime_enable will increase power disable depth.
+If the probe fails, we should use pm_runtime_disable() to balance
+pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
+undo pm_runtime_use_autosuspend()
+In the PM Runtime docs:
+ Drivers in ->remove() callback should undo the runtime PM changes done
+ in ->probe(). Usually this means calling pm_runtime_disable(),
+ pm_runtime_dont_use_autosuspend() etc.
+
+We should do this in error handling.
+
+Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/phy/motorola/phy-mapphone-mdm6600.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
+index 5172971f4c36..3cd4d51c247c 100644
+--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
++++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
+@@ -629,7 +629,8 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
+ cleanup:
+ if (error < 0)
+ phy_mdm6600_device_power_off(ddata);
+-
++ pm_runtime_disable(ddata->dev);
++ pm_runtime_dont_use_autosuspend(ddata->dev);
+ return error;
+ }
+
+--
+2.35.1
+
--- /dev/null
+From e9e60ca6eab61c3875fc9812d4407b22d50fb897 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 7 Apr 2022 11:18:57 +0200
+Subject: phy: samsung: exynos5250-sata: fix missing device put in probe error
+ paths
+
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ]
+
+The actions of of_find_i2c_device_by_node() in probe function should be
+reversed in error paths by putting the reference to obtained device.
+
+Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
+Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/phy/samsung/phy-exynos5250-sata.c | 20 ++++++++++++++------
+ 1 file changed, 14 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
+index 6c305a3fe187..595adba5fb8f 100644
+--- a/drivers/phy/samsung/phy-exynos5250-sata.c
++++ b/drivers/phy/samsung/phy-exynos5250-sata.c
+@@ -196,20 +196,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
+ sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
+ if (IS_ERR(sata_phy->phyclk)) {
+ dev_err(dev, "failed to get clk for PHY\n");
+- return PTR_ERR(sata_phy->phyclk);
++ ret = PTR_ERR(sata_phy->phyclk);
++ goto put_dev;
+ }
+
+ ret = clk_prepare_enable(sata_phy->phyclk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable source clk\n");
+- return ret;
++ goto put_dev;
+ }
+
+ sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops);
+ if (IS_ERR(sata_phy->phy)) {
+- clk_disable_unprepare(sata_phy->phyclk);
+ dev_err(dev, "failed to create PHY\n");
+- return PTR_ERR(sata_phy->phy);
++ ret = PTR_ERR(sata_phy->phy);
++ goto clk_disable;
+ }
+
+ phy_set_drvdata(sata_phy->phy, sata_phy);
+@@ -217,11 +218,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
+ phy_provider = devm_of_phy_provider_register(dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+- clk_disable_unprepare(sata_phy->phyclk);
+- return PTR_ERR(phy_provider);
++ ret = PTR_ERR(phy_provider);
++ goto clk_disable;
+ }
+
+ return 0;
++
++clk_disable:
++ clk_disable_unprepare(sata_phy->phyclk);
++put_dev:
++ put_device(&sata_phy->client->dev);
++
++ return ret;
+ }
+
+ static const struct of_device_id exynos_sata_phy_of_match[] = {
+--
+2.35.1
+
--- /dev/null
+From 264d23131767b5144fd2a44d2bb8ba1dc8cb3469 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 7 Apr 2022 11:18:56 +0200
+Subject: phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ]
+
+The device_node pointer is returned by of_parse_phandle() with refcount
+incremented. We should use of_node_put() on it when done.
+
+Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/phy/samsung/phy-exynos5250-sata.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
+index 9ec234243f7c..6c305a3fe187 100644
+--- a/drivers/phy/samsung/phy-exynos5250-sata.c
++++ b/drivers/phy/samsung/phy-exynos5250-sata.c
+@@ -187,6 +187,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
+ return -EINVAL;
+
+ sata_phy->client = of_find_i2c_device_by_node(node);
++ of_node_put(node);
+ if (!sata_phy->client)
+ return -EPROBE_DEFER;
+
+--
+2.35.1
+
--- /dev/null
+From e0e85e38d8bf68ee68d3882f5d94b27e3acef42f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 1 Mar 2022 02:58:49 +0000
+Subject: phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ]
+
+The pm_runtime_enable() will increase power disable depth.
+If the probe fails, we should use pm_runtime_disable() to balance
+pm_runtime_enable().
+Add missing pm_runtime_disable() for serdes_am654_probe().
+
+Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/phy/ti/phy-am654-serdes.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
+index c1211c4f863c..0be727bb9f79 100644
+--- a/drivers/phy/ti/phy-am654-serdes.c
++++ b/drivers/phy/ti/phy-am654-serdes.c
+@@ -838,7 +838,7 @@ static int serdes_am654_probe(struct platform_device *pdev)
+
+ clk_err:
+ of_clk_del_provider(node);
+-
++ pm_runtime_disable(dev);
+ return ret;
+ }
+
+--
+2.35.1
+
--- /dev/null
+From 7ae66a0e5db3104b9bc5b56e1a1470f56ac19957 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 18 Mar 2022 10:57:46 +0000
+Subject: phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
+
+From: Miaoqian Lin <linmq006@gmail.com>
+
+[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ]
+
+The corresponding API for clk_prepare_enable is clk_disable_unprepare.
+Make sure that the clock is unprepared on exit by changing clk_disable
+to clk_disable_unprepare.
+
+Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
+Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
+Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/phy/ti/phy-omap-usb2.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
+index 3a505fe5715a..31a775877f6e 100644
+--- a/drivers/phy/ti/phy-omap-usb2.c
++++ b/drivers/phy/ti/phy-omap-usb2.c
+@@ -215,7 +215,7 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
+ return 0;
+
+ err1:
+- clk_disable(phy->wkupclk);
++ clk_disable_unprepare(phy->wkupclk);
+
+ err0:
+ return ret;
+--
+2.35.1
+
--- /dev/null
+From 9bcda1390ce81aff995ade77bc5c48558bd9ffc4 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sat, 9 Apr 2022 18:59:58 +0800
+Subject: pinctrl: mediatek: moore: Fix build error
+
+From: YueHaibing <yuehaibing@huawei.com>
+
+[ Upstream commit 87950929e2ff2236207bdbe14bff8230558b541b ]
+
+If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:
+
+drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
+pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
+drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
+pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'
+
+Select EINT_MTK for PINCTRL_MTK_V2 to fix this.
+
+Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
+Signed-off-by: YueHaibing <yuehaibing@huawei.com>
+Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/mediatek/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
+index 66db4ac5d169..c7fa1525e42a 100644
+--- a/drivers/pinctrl/mediatek/Kconfig
++++ b/drivers/pinctrl/mediatek/Kconfig
+@@ -30,6 +30,7 @@ config PINCTRL_MTK_MOORE
+ select GENERIC_PINMUX_FUNCTIONS
+ select GPIOLIB
+ select OF_GPIO
++ select EINT_MTK
+ select PINCTRL_MTK_V2
+
+ config PINCTRL_MTK_PARIS
+--
+2.35.1
+
--- /dev/null
+From bc94114fb328a4cf307631d52db2493964caff65 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 03:14:30 +0000
+Subject: pinctrl: pistachio: fix use of irq_of_parse_and_map()
+
+From: Lv Ruyi <lv.ruyi@zte.com.cn>
+
+[ Upstream commit 0c9843a74a85224a89daa81fa66891dae2f930e1 ]
+
+The irq_of_parse_and_map() function returns 0 on failure, and does not
+return an negative value.
+
+Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver")
+Reported-by: Zeal Robot <zealci@zte.com.cn>
+Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
+Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/pinctrl-pistachio.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
+index 8d271c6b0ca4..5de691c630b4 100644
+--- a/drivers/pinctrl/pinctrl-pistachio.c
++++ b/drivers/pinctrl/pinctrl-pistachio.c
+@@ -1374,10 +1374,10 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
+ }
+
+ irq = irq_of_parse_and_map(child, 0);
+- if (irq < 0) {
+- dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
++ if (!irq) {
++ dev_err(pctl->dev, "No IRQ for bank %u\n", i);
+ of_node_put(child);
+- ret = irq;
++ ret = -EINVAL;
+ goto err;
+ }
+
+--
+2.35.1
+
--- /dev/null
+From 109833269e456e24273348dd8a30e4b670dd0a5c Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 18 Mar 2022 19:30:02 +0100
+Subject: pinctrl: qcom: sm6350: fix order of UFS & SDC pins
+
+From: Luca Weiss <luca.weiss@fairphone.com>
+
+[ Upstream commit ef0beba1a5fb0c693ddf7d31246bd96c925ffd00 ]
+
+In other places the SDC and UFS pins have been swapped but this was
+missed in the PINCTRL_PIN definitions. Fix that.
+
+Fixes: 7d74b55afd27 ("pinctrl: qcom: Add SM6350 pinctrl driver")
+Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
+Link: https://lore.kernel.org/r/20220318183004.858707-5-luca.weiss@fairphone.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/qcom/pinctrl-sm6350.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/pinctrl/qcom/pinctrl-sm6350.c b/drivers/pinctrl/qcom/pinctrl-sm6350.c
+index 4d37b817b232..a91a86628f2f 100644
+--- a/drivers/pinctrl/qcom/pinctrl-sm6350.c
++++ b/drivers/pinctrl/qcom/pinctrl-sm6350.c
+@@ -264,14 +264,14 @@ static const struct pinctrl_pin_desc sm6350_pins[] = {
+ PINCTRL_PIN(153, "GPIO_153"),
+ PINCTRL_PIN(154, "GPIO_154"),
+ PINCTRL_PIN(155, "GPIO_155"),
+- PINCTRL_PIN(156, "SDC1_RCLK"),
+- PINCTRL_PIN(157, "SDC1_CLK"),
+- PINCTRL_PIN(158, "SDC1_CMD"),
+- PINCTRL_PIN(159, "SDC1_DATA"),
+- PINCTRL_PIN(160, "SDC2_CLK"),
+- PINCTRL_PIN(161, "SDC2_CMD"),
+- PINCTRL_PIN(162, "SDC2_DATA"),
+- PINCTRL_PIN(163, "UFS_RESET"),
++ PINCTRL_PIN(156, "UFS_RESET"),
++ PINCTRL_PIN(157, "SDC1_RCLK"),
++ PINCTRL_PIN(158, "SDC1_CLK"),
++ PINCTRL_PIN(159, "SDC1_CMD"),
++ PINCTRL_PIN(160, "SDC1_DATA"),
++ PINCTRL_PIN(161, "SDC2_CLK"),
++ PINCTRL_PIN(162, "SDC2_CMD"),
++ PINCTRL_PIN(163, "SDC2_DATA"),
+ };
+
+ #define DECLARE_MSM_GPIO_PINS(pin) \
+--
+2.35.1
+
--- /dev/null
+From 622ab70d2703bbb865c00920ef18d2f8b86c6b14 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 16:24:31 +0200
+Subject: pinctrl: rockchip: fix RK3308 pinmux bits
+
+From: Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+[ Upstream commit 1f3e25a068832f8892a5ff71467622d012f5bc9f ]
+
+Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
+pointing to non-existing registers.
+
+Fix the entire table.
+
+Also add a comment in front of each entry with the same string that appears
+in the datasheet to make the table easier to compare with the docs.
+
+This fix has been tested on real hardware for the gpio3b3_sel entry.
+
+Fixes: 7825aeb7b208 ("pinctrl: rockchip: add rk3308 SoC support")
+Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/pinctrl-rockchip.c | 45 ++++++++++++++++++++----------
+ 1 file changed, 30 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
+index a1b598b86aa9..65fa305b5f59 100644
+--- a/drivers/pinctrl/pinctrl-rockchip.c
++++ b/drivers/pinctrl/pinctrl-rockchip.c
+@@ -457,95 +457,110 @@ static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
+
+ static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
+ {
++ /* gpio1b6_sel */
+ .num = 1,
+ .pin = 14,
+ .reg = 0x28,
+ .bit = 12,
+ .mask = 0xf
+ }, {
++ /* gpio1b7_sel */
+ .num = 1,
+ .pin = 15,
+ .reg = 0x2c,
+ .bit = 0,
+ .mask = 0x3
+ }, {
++ /* gpio1c2_sel */
+ .num = 1,
+ .pin = 18,
+ .reg = 0x30,
+ .bit = 4,
+ .mask = 0xf
+ }, {
++ /* gpio1c3_sel */
+ .num = 1,
+ .pin = 19,
+ .reg = 0x30,
+ .bit = 8,
+ .mask = 0xf
+ }, {
++ /* gpio1c4_sel */
+ .num = 1,
+ .pin = 20,
+ .reg = 0x30,
+ .bit = 12,
+ .mask = 0xf
+ }, {
++ /* gpio1c5_sel */
+ .num = 1,
+ .pin = 21,
+ .reg = 0x34,
+ .bit = 0,
+ .mask = 0xf
+ }, {
++ /* gpio1c6_sel */
+ .num = 1,
+ .pin = 22,
+ .reg = 0x34,
+ .bit = 4,
+ .mask = 0xf
+ }, {
++ /* gpio1c7_sel */
+ .num = 1,
+ .pin = 23,
+ .reg = 0x34,
+ .bit = 8,
+ .mask = 0xf
+ }, {
++ /* gpio3b4_sel */
+ .num = 3,
+ .pin = 12,
+ .reg = 0x68,
+ .bit = 8,
+ .mask = 0xf
+ }, {
++ /* gpio3b5_sel */
+ .num = 3,
+ .pin = 13,
+ .reg = 0x68,
+ .bit = 12,
+ .mask = 0xf
+ }, {
++ /* gpio2a2_sel */
+ .num = 2,
+ .pin = 2,
+- .reg = 0x608,
+- .bit = 0,
+- .mask = 0x7
++ .reg = 0x40,
++ .bit = 4,
++ .mask = 0x3
+ }, {
++ /* gpio2a3_sel */
+ .num = 2,
+ .pin = 3,
+- .reg = 0x608,
+- .bit = 4,
+- .mask = 0x7
++ .reg = 0x40,
++ .bit = 6,
++ .mask = 0x3
+ }, {
++ /* gpio2c0_sel */
+ .num = 2,
+ .pin = 16,
+- .reg = 0x610,
+- .bit = 8,
+- .mask = 0x7
++ .reg = 0x50,
++ .bit = 0,
++ .mask = 0x3
+ }, {
++ /* gpio3b2_sel */
+ .num = 3,
+ .pin = 10,
+- .reg = 0x610,
+- .bit = 0,
+- .mask = 0x7
++ .reg = 0x68,
++ .bit = 4,
++ .mask = 0x3
+ }, {
++ /* gpio3b3_sel */
+ .num = 3,
+ .pin = 11,
+- .reg = 0x610,
+- .bit = 4,
+- .mask = 0x7
++ .reg = 0x68,
++ .bit = 6,
++ .mask = 0x3
+ },
+ };
+
+--
+2.35.1
+
--- /dev/null
+From f722bca9ef16bbec60bc8e0a776d3702ab985f8c Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 15 Apr 2022 23:54:10 +0200
+Subject: pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs
+ in EOI
+
+From: Marek Vasut <marex@denx.de>
+
+[ Upstream commit e74200ebf7c4f6a7a7d1be9f63833ddba251effa ]
+
+The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
+skip calling it for EDGE triggered interrupts altogether to avoid wasting
+CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
+the majority and LEVEL triggered interrupts are the exception no less, and
+the CPU cycles are not abundant.
+
+Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
+Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
+Cc: Linus Walleij <linus.walleij@linaro.org>
+Cc: Marc Zyngier <maz@kernel.org>
+Cc: linux-stm32@st-md-mailman.stormreply.com
+Cc: linux-arm-kernel@lists.infradead.org
+To: linux-gpio@vger.kernel.org
+Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/stm32/pinctrl-stm32.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
+index 9ed764731570..df1d6b466fb7 100644
+--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
++++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
+@@ -311,6 +311,10 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
+ struct stm32_gpio_bank *bank = d->domain->host_data;
+ int level;
+
++ /* Do not access the GPIO if this is not LEVEL triggered IRQ. */
++ if (!(bank->irq_type[d->hwirq] & IRQ_TYPE_LEVEL_MASK))
++ return;
++
+ /* If level interrupt type then retrig */
+ level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
+ if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
+--
+2.35.1
+
--- /dev/null
+From df2e1ecf7fd0b779dff59e4a3cd09548077ab5a9 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 16:08:27 +0200
+Subject: pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ
+ requested
+
+From: Marek Vasut <marex@denx.de>
+
+[ Upstream commit 05d8af449d93e04547b4c6b328e39c890bc803f4 ]
+
+The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
+register IO, clk_disable(). The clock manipulation requires locking which
+happens with IRQs disabled in clk_enable_lock(). Instead of turning the
+clock on and off all the time, enable the clock in case LEVEL interrupt is
+requested and keep the clock enabled until all LEVEL interrupts are freed.
+The LEVEL interrupts are an exception on this platform and seldom used, so
+this does not affect the common case.
+
+This simplifies the LEVEL interrupt handling considerably and also fixes
+the following splat found when using preempt-rt:
+ ------------[ cut here ]------------
+ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
+ Modules linked in:
+ CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
+ Hardware name: STM32 (Device Tree Support)
+ [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
+ [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
+ [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
+ [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
+ [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
+ [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
+ [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
+ [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
+ [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
+ [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
+ [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
+ [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
+ [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
+ [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
+ [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
+ Exception stack(0xc0e01f18 to 0xc0e01f60)
+ 1f00: 0000300c 00000000
+ 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
+ 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
+ [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
+ [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
+ [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
+ [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
+ [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
+ [<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
+ ---[ end trace 0000000000000002 ]---
+
+Power consumption measured on STM32MP157C DHCOM SoM is not increased or
+is below noise threshold.
+
+Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
+Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
+Cc: Linus Walleij <linus.walleij@linaro.org>
+Cc: Marc Zyngier <maz@kernel.org>
+Cc: linux-stm32@st-md-mailman.stormreply.com
+Cc: linux-arm-kernel@lists.infradead.org
+To: linux-gpio@vger.kernel.org
+Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
+Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/stm32/pinctrl-stm32.c | 19 +++++++++++++++++--
+ 1 file changed, 17 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
+index df1d6b466fb7..f7c9459f6628 100644
+--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
++++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
+@@ -225,6 +225,13 @@ static void stm32_gpio_free(struct gpio_chip *chip, unsigned offset)
+ pinctrl_gpio_free(chip->base + offset);
+ }
+
++static int stm32_gpio_get_noclk(struct gpio_chip *chip, unsigned int offset)
++{
++ struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
++
++ return !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
++}
++
+ static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
+ {
+ struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
+@@ -232,7 +239,7 @@ static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
+
+ clk_enable(bank->clk);
+
+- ret = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
++ ret = stm32_gpio_get_noclk(chip, offset);
+
+ clk_disable(bank->clk);
+
+@@ -316,7 +323,7 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
+ return;
+
+ /* If level interrupt type then retrig */
+- level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
++ level = stm32_gpio_get_noclk(&bank->gpio_chip, d->hwirq);
+ if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
+ (level == 1 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_HIGH))
+ irq_chip_retrigger_hierarchy(d);
+@@ -358,6 +365,7 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
+ {
+ struct stm32_gpio_bank *bank = irq_data->domain->host_data;
+ struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
++ unsigned long flags;
+ int ret;
+
+ ret = stm32_gpio_direction_input(&bank->gpio_chip, irq_data->hwirq);
+@@ -371,6 +379,10 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
+ return ret;
+ }
+
++ flags = irqd_get_trigger_type(irq_data);
++ if (flags & IRQ_TYPE_LEVEL_MASK)
++ clk_enable(bank->clk);
++
+ return 0;
+ }
+
+@@ -378,6 +390,9 @@ static void stm32_gpio_irq_release_resources(struct irq_data *irq_data)
+ {
+ struct stm32_gpio_bank *bank = irq_data->domain->host_data;
+
++ if (bank->irq_type[irq_data->hwirq] & IRQ_TYPE_LEVEL_MASK)
++ clk_disable(bank->clk);
++
+ gpiochip_unlock_as_irq(&bank->gpio_chip, irq_data->hwirq);
+ }
+
+--
+2.35.1
+
--- /dev/null
+From 3a05b37aa6fe14b20f1537dfcccbdb2e9934ec85 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 27 Apr 2022 13:49:56 +0200
+Subject: platform/x86: asus-wmi: Fix driver not binding when fan curve control
+ probe fails
+
+From: Hans de Goede <hdegoede@redhat.com>
+
+[ Upstream commit 9fe1bb29ea0ab231aa916dad4bcf0c435beb5869 ]
+
+Before this commit fan_curve_check_present() was trying to not cause
+the probe to fail on devices without fan curve control by testing for
+known error codes returned by asus_wmi_evaluate_method_buf().
+
+Checking for ENODATA or ENODEV, with the latter being returned by this
+function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
+is returned. But for other ACPI integer returns this function just returns
+them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.
+
+On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:
+
+ asus-nb-wmi: probe of asus-nb-wmi failed with error 2
+
+Instead of playing whack a mole with error codes here, simply treat all
+errors as there not being any fan curves, fixing the driver no longer
+loading on the Asus U36SD laptop.
+
+Fixes: e3d13da7f77d ("platform/x86: asus-wmi: Fix regression when probing for fan curve control")
+BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125
+Cc: Luke D. Jones <luke@ljones.dev>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/platform/x86/asus-wmi.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
+index 399a4a345224..1e7bc0c595c7 100644
+--- a/drivers/platform/x86/asus-wmi.c
++++ b/drivers/platform/x86/asus-wmi.c
+@@ -2227,9 +2227,10 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
+
+ err = fan_curve_get_factory_default(asus, fan_dev);
+ if (err) {
+- if (err == -ENODEV || err == -ENODATA)
+- return 0;
+- return err;
++ pr_debug("fan_curve_get_factory_default(0x%08x) failed: %d\n",
++ fan_dev, err);
++ /* Don't cause probe to fail on devices without fan-curves */
++ return 0;
+ }
+
+ *available = true;
+--
+2.35.1
+
--- /dev/null
+From d39d6e952f0dcce060df9c8596cde5cc048cf1c3 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 13 Apr 2022 10:37:44 +0300
+Subject: platform/x86: asus-wmi: Potential buffer overflow in
+ asus_wmi_evaluate_method_buf()
+
+From: Dan Carpenter <dan.carpenter@oracle.com>
+
+[ Upstream commit 4345ece8f0bcc682f1fb3b648922c9be5f7dbe6c ]
+
+This code tests for if the obj->buffer.length is larger than the buffer
+but then it just does the memcpy() anyway.
+
+Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves")
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Link: https://lore.kernel.org/r/20220413073744.GB8812@kili
+Reviewed-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/platform/x86/asus-wmi.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
+index adab31b52f2a..399a4a345224 100644
+--- a/drivers/platform/x86/asus-wmi.c
++++ b/drivers/platform/x86/asus-wmi.c
+@@ -371,10 +371,14 @@ static int asus_wmi_evaluate_method_buf(u32 method_id,
+
+ switch (obj->type) {
+ case ACPI_TYPE_BUFFER:
+- if (obj->buffer.length > size)
++ if (obj->buffer.length > size) {
+ err = -ENOSPC;
+- if (obj->buffer.length == 0)
++ break;
++ }
++ if (obj->buffer.length == 0) {
+ err = -ENODATA;
++ break;
++ }
+
+ memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length);
+ break;
+--
+2.35.1
+
--- /dev/null
+From b92e4f3f14a1f01b3a4bc3df8cf7203f3b27ca38 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 12:57:56 +1000
+Subject: powerpc/perf: Fix 32bit compile
+
+From: Alexey Kardashevskiy <aik@ozlabs.ru>
+
+[ Upstream commit bb82c574691daf8f7fa9a160264d15c5804cb769 ]
+
+The "read_bhrb" global symbol is only called under CONFIG_PPC64 of
+arch/powerpc/perf/core-book3s.c but it is compiled for both 32 and 64 bit
+anyway (and LLVM fails to link this on 32bit).
+
+This fixes it by moving bhrb.o to obj64 targets.
+
+Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Link: https://lore.kernel.org/r/20220421025756.571995-1-aik@ozlabs.ru
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/perf/Makefile | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
+index 2f46e31c7612..4f53d0b97539 100644
+--- a/arch/powerpc/perf/Makefile
++++ b/arch/powerpc/perf/Makefile
+@@ -3,11 +3,11 @@
+ obj-y += callchain.o callchain_$(BITS).o perf_regs.o
+ obj-$(CONFIG_COMPAT) += callchain_32.o
+
+-obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o bhrb.o
++obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o
+ obj64-$(CONFIG_PPC_PERF_CTRS) += ppc970-pmu.o power5-pmu.o \
+ power5+-pmu.o power6-pmu.o power7-pmu.o \
+ isa207-common.o power8-pmu.o power9-pmu.o \
+- generic-compat-pmu.o power10-pmu.o
++ generic-compat-pmu.o power10-pmu.o bhrb.o
+ obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
+
+ obj-$(CONFIG_PPC_POWERNV) += imc-pmu.o
+--
+2.35.1
+
--- /dev/null
+From ffbbe0d08b0f16273a00093268505b3b9ea96ce9 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 27 Apr 2022 18:51:46 -0500
+Subject: Revert "ibmvnic: Add ethtool private flag for driver-defined queue
+ limits"
+
+From: Dany Madden <drt@linux.ibm.com>
+
+[ Upstream commit aeaf59b78712c7a1827c76f086acff4f586e072f ]
+
+This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae
+
+When client requests channel or ring size larger than what the server
+can support the server will cap the request to the supported max. So,
+the client would not be able to successfully request resources that
+exceed the server limit.
+
+Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits")
+Signed-off-by: Dany Madden <drt@linux.ibm.com>
+Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/ibm/ibmvnic.c | 129 ++++++++---------------------
+ drivers/net/ethernet/ibm/ibmvnic.h | 6 --
+ 2 files changed, 35 insertions(+), 100 deletions(-)
+
+diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
+index b4804ce63151..a4428a7d0f35 100644
+--- a/drivers/net/ethernet/ibm/ibmvnic.c
++++ b/drivers/net/ethernet/ibm/ibmvnic.c
+@@ -3209,13 +3209,8 @@ static void ibmvnic_get_ringparam(struct net_device *netdev,
+ {
+ struct ibmvnic_adapter *adapter = netdev_priv(netdev);
+
+- if (adapter->priv_flags & IBMVNIC_USE_SERVER_MAXES) {
+- ring->rx_max_pending = adapter->max_rx_add_entries_per_subcrq;
+- ring->tx_max_pending = adapter->max_tx_entries_per_subcrq;
+- } else {
+- ring->rx_max_pending = IBMVNIC_MAX_QUEUE_SZ;
+- ring->tx_max_pending = IBMVNIC_MAX_QUEUE_SZ;
+- }
++ ring->rx_max_pending = adapter->max_rx_add_entries_per_subcrq;
++ ring->tx_max_pending = adapter->max_tx_entries_per_subcrq;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = adapter->req_rx_add_entries_per_subcrq;
+@@ -3230,23 +3225,21 @@ static int ibmvnic_set_ringparam(struct net_device *netdev,
+ struct netlink_ext_ack *extack)
+ {
+ struct ibmvnic_adapter *adapter = netdev_priv(netdev);
+- int ret;
+
+- ret = 0;
++ if (ring->rx_pending > adapter->max_rx_add_entries_per_subcrq ||
++ ring->tx_pending > adapter->max_tx_entries_per_subcrq) {
++ netdev_err(netdev, "Invalid request.\n");
++ netdev_err(netdev, "Max tx buffers = %llu\n",
++ adapter->max_rx_add_entries_per_subcrq);
++ netdev_err(netdev, "Max rx buffers = %llu\n",
++ adapter->max_tx_entries_per_subcrq);
++ return -EINVAL;
++ }
++
+ adapter->desired.rx_entries = ring->rx_pending;
+ adapter->desired.tx_entries = ring->tx_pending;
+
+- ret = wait_for_reset(adapter);
+-
+- if (!ret &&
+- (adapter->req_rx_add_entries_per_subcrq != ring->rx_pending ||
+- adapter->req_tx_entries_per_subcrq != ring->tx_pending))
+- netdev_info(netdev,
+- "Could not match full ringsize request. Requested: RX %d, TX %d; Allowed: RX %llu, TX %llu\n",
+- ring->rx_pending, ring->tx_pending,
+- adapter->req_rx_add_entries_per_subcrq,
+- adapter->req_tx_entries_per_subcrq);
+- return ret;
++ return wait_for_reset(adapter);
+ }
+
+ static void ibmvnic_get_channels(struct net_device *netdev,
+@@ -3254,14 +3247,8 @@ static void ibmvnic_get_channels(struct net_device *netdev,
+ {
+ struct ibmvnic_adapter *adapter = netdev_priv(netdev);
+
+- if (adapter->priv_flags & IBMVNIC_USE_SERVER_MAXES) {
+- channels->max_rx = adapter->max_rx_queues;
+- channels->max_tx = adapter->max_tx_queues;
+- } else {
+- channels->max_rx = IBMVNIC_MAX_QUEUES;
+- channels->max_tx = IBMVNIC_MAX_QUEUES;
+- }
+-
++ channels->max_rx = adapter->max_rx_queues;
++ channels->max_tx = adapter->max_tx_queues;
+ channels->max_other = 0;
+ channels->max_combined = 0;
+ channels->rx_count = adapter->req_rx_queues;
+@@ -3274,22 +3261,11 @@ static int ibmvnic_set_channels(struct net_device *netdev,
+ struct ethtool_channels *channels)
+ {
+ struct ibmvnic_adapter *adapter = netdev_priv(netdev);
+- int ret;
+
+- ret = 0;
+ adapter->desired.rx_queues = channels->rx_count;
+ adapter->desired.tx_queues = channels->tx_count;
+
+- ret = wait_for_reset(adapter);
+-
+- if (!ret &&
+- (adapter->req_rx_queues != channels->rx_count ||
+- adapter->req_tx_queues != channels->tx_count))
+- netdev_info(netdev,
+- "Could not match full channels request. Requested: RX %d, TX %d; Allowed: RX %llu, TX %llu\n",
+- channels->rx_count, channels->tx_count,
+- adapter->req_rx_queues, adapter->req_tx_queues);
+- return ret;
++ return wait_for_reset(adapter);
+ }
+
+ static void ibmvnic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+@@ -3297,43 +3273,32 @@ static void ibmvnic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+ struct ibmvnic_adapter *adapter = netdev_priv(dev);
+ int i;
+
+- switch (stringset) {
+- case ETH_SS_STATS:
+- for (i = 0; i < ARRAY_SIZE(ibmvnic_stats);
+- i++, data += ETH_GSTRING_LEN)
+- memcpy(data, ibmvnic_stats[i].name, ETH_GSTRING_LEN);
++ if (stringset != ETH_SS_STATS)
++ return;
+
+- for (i = 0; i < adapter->req_tx_queues; i++) {
+- snprintf(data, ETH_GSTRING_LEN, "tx%d_packets", i);
+- data += ETH_GSTRING_LEN;
++ for (i = 0; i < ARRAY_SIZE(ibmvnic_stats); i++, data += ETH_GSTRING_LEN)
++ memcpy(data, ibmvnic_stats[i].name, ETH_GSTRING_LEN);
+
+- snprintf(data, ETH_GSTRING_LEN, "tx%d_bytes", i);
+- data += ETH_GSTRING_LEN;
++ for (i = 0; i < adapter->req_tx_queues; i++) {
++ snprintf(data, ETH_GSTRING_LEN, "tx%d_packets", i);
++ data += ETH_GSTRING_LEN;
+
+- snprintf(data, ETH_GSTRING_LEN,
+- "tx%d_dropped_packets", i);
+- data += ETH_GSTRING_LEN;
+- }
++ snprintf(data, ETH_GSTRING_LEN, "tx%d_bytes", i);
++ data += ETH_GSTRING_LEN;
+
+- for (i = 0; i < adapter->req_rx_queues; i++) {
+- snprintf(data, ETH_GSTRING_LEN, "rx%d_packets", i);
+- data += ETH_GSTRING_LEN;
++ snprintf(data, ETH_GSTRING_LEN, "tx%d_dropped_packets", i);
++ data += ETH_GSTRING_LEN;
++ }
+
+- snprintf(data, ETH_GSTRING_LEN, "rx%d_bytes", i);
+- data += ETH_GSTRING_LEN;
++ for (i = 0; i < adapter->req_rx_queues; i++) {
++ snprintf(data, ETH_GSTRING_LEN, "rx%d_packets", i);
++ data += ETH_GSTRING_LEN;
+
+- snprintf(data, ETH_GSTRING_LEN, "rx%d_interrupts", i);
+- data += ETH_GSTRING_LEN;
+- }
+- break;
++ snprintf(data, ETH_GSTRING_LEN, "rx%d_bytes", i);
++ data += ETH_GSTRING_LEN;
+
+- case ETH_SS_PRIV_FLAGS:
+- for (i = 0; i < ARRAY_SIZE(ibmvnic_priv_flags); i++)
+- strcpy(data + i * ETH_GSTRING_LEN,
+- ibmvnic_priv_flags[i]);
+- break;
+- default:
+- return;
++ snprintf(data, ETH_GSTRING_LEN, "rx%d_interrupts", i);
++ data += ETH_GSTRING_LEN;
+ }
+ }
+
+@@ -3346,8 +3311,6 @@ static int ibmvnic_get_sset_count(struct net_device *dev, int sset)
+ return ARRAY_SIZE(ibmvnic_stats) +
+ adapter->req_tx_queues * NUM_TX_STATS +
+ adapter->req_rx_queues * NUM_RX_STATS;
+- case ETH_SS_PRIV_FLAGS:
+- return ARRAY_SIZE(ibmvnic_priv_flags);
+ default:
+ return -EOPNOTSUPP;
+ }
+@@ -3400,26 +3363,6 @@ static void ibmvnic_get_ethtool_stats(struct net_device *dev,
+ }
+ }
+
+-static u32 ibmvnic_get_priv_flags(struct net_device *netdev)
+-{
+- struct ibmvnic_adapter *adapter = netdev_priv(netdev);
+-
+- return adapter->priv_flags;
+-}
+-
+-static int ibmvnic_set_priv_flags(struct net_device *netdev, u32 flags)
+-{
+- struct ibmvnic_adapter *adapter = netdev_priv(netdev);
+- bool which_maxes = !!(flags & IBMVNIC_USE_SERVER_MAXES);
+-
+- if (which_maxes)
+- adapter->priv_flags |= IBMVNIC_USE_SERVER_MAXES;
+- else
+- adapter->priv_flags &= ~IBMVNIC_USE_SERVER_MAXES;
+-
+- return 0;
+-}
+-
+ static const struct ethtool_ops ibmvnic_ethtool_ops = {
+ .get_drvinfo = ibmvnic_get_drvinfo,
+ .get_msglevel = ibmvnic_get_msglevel,
+@@ -3433,8 +3376,6 @@ static const struct ethtool_ops ibmvnic_ethtool_ops = {
+ .get_sset_count = ibmvnic_get_sset_count,
+ .get_ethtool_stats = ibmvnic_get_ethtool_stats,
+ .get_link_ksettings = ibmvnic_get_link_ksettings,
+- .get_priv_flags = ibmvnic_get_priv_flags,
+- .set_priv_flags = ibmvnic_set_priv_flags,
+ };
+
+ /* Routines for managing CRQs/sCRQs */
+diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h
+index 8f5cefb932dd..1310c861bf83 100644
+--- a/drivers/net/ethernet/ibm/ibmvnic.h
++++ b/drivers/net/ethernet/ibm/ibmvnic.h
+@@ -41,11 +41,6 @@
+
+ #define IBMVNIC_RESET_DELAY 100
+
+-static const char ibmvnic_priv_flags[][ETH_GSTRING_LEN] = {
+-#define IBMVNIC_USE_SERVER_MAXES 0x1
+- "use-server-maxes"
+-};
+-
+ struct ibmvnic_login_buffer {
+ __be32 len;
+ __be32 version;
+@@ -883,7 +878,6 @@ struct ibmvnic_adapter {
+ struct ibmvnic_control_ip_offload_buffer ip_offload_ctrl;
+ dma_addr_t ip_offload_ctrl_tok;
+ u32 msg_enable;
+- u32 priv_flags;
+
+ /* Vital Product Data (VPD) */
+ struct ibmvnic_vpd *vpd;
+--
+2.35.1
+
--- /dev/null
+From b2450e030b8d593d90d13f1e8c56d13038982ba0 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 16:52:41 -0400
+Subject: sctp: check asoc strreset_chunk in sctp_generate_reconf_event
+
+From: Xin Long <lucien.xin@gmail.com>
+
+[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]
+
+A null pointer reference issue can be triggered when the response of a
+stream reconf request arrives after the timer is triggered, such as:
+
+ send Incoming SSN Reset Request --->
+ CPU0:
+ reconf timer is triggered,
+ go to the handler code before hold sk lock
+ <--- reply with Outgoing SSN Reset Request
+ CPU1:
+ process Outgoing SSN Reset Request,
+ and set asoc->strreset_chunk to NULL
+ CPU0:
+ continue the handler code, hold sk lock,
+ and try to hold asoc->strreset_chunk, crash!
+
+In Ying Xu's testing, the call trace is:
+
+ [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
+ [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
+ [ ] Call Trace:
+ [ ] <IRQ>
+ [ ] sctp_sf_send_reconf+0x2c/0x100 [sctp]
+ [ ] sctp_do_sm+0xa4/0x220 [sctp]
+ [ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp]
+ [ ] call_timer_fn+0x26/0x130
+
+This patch is to fix it by returning from the timer handler if asoc
+strreset_chunk is already set to NULL.
+
+Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer")
+Reported-by: Ying Xu <yinxu@redhat.com>
+Signed-off-by: Xin Long <lucien.xin@gmail.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/sctp/sm_sideeffect.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
+index b3815b568e8e..463c4a58d2c3 100644
+--- a/net/sctp/sm_sideeffect.c
++++ b/net/sctp/sm_sideeffect.c
+@@ -458,6 +458,10 @@ void sctp_generate_reconf_event(struct timer_list *t)
+ goto out_unlock;
+ }
+
++ /* This happens when the response arrives after the timer is triggered. */
++ if (!asoc->strreset_chunk)
++ goto out_unlock;
++
+ error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT,
+ SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_RECONF),
+ asoc->state, asoc->ep, asoc,
+--
+2.35.1
+
--- /dev/null
+From f49670bcc1970c2024af181f10b99b4248cf43e8 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 16:35:49 -0700
+Subject: selftest/vm: verify mmap addr in mremap_test
+
+From: Sidhartha Kumar <sidhartha.kumar@oracle.com>
+
+[ Upstream commit 9c85a9bae267f6b5e5e374d0d023bbbe9db096d3 ]
+
+Avoid calling mmap with requested addresses that are less than the
+system's mmap_min_addr. When run as root, mmap returns EACCES when
+trying to map addresses < mmap_min_addr. This is not one of the error
+codes for the condition to retry the mmap in the test.
+
+Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
+addr > vm.mmap_min_addr.
+
+Add a munmap call after an alignment check as the mappings are retained
+after the retry and can reach the vm.max_map_count sysctl.
+
+Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com
+Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
+Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/testing/selftests/vm/mremap_test.c | 41 +++++++++++++++++++++++-
+ 1 file changed, 40 insertions(+), 1 deletion(-)
+
+diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c
+index 7c0b0617b9f8..9a518fee6306 100644
+--- a/tools/testing/selftests/vm/mremap_test.c
++++ b/tools/testing/selftests/vm/mremap_test.c
+@@ -6,6 +6,7 @@
+
+ #include <errno.h>
+ #include <stdlib.h>
++#include <stdio.h>
+ #include <string.h>
+ #include <sys/mman.h>
+ #include <time.h>
+@@ -63,6 +64,35 @@ enum {
+ .expect_failure = should_fail \
+ }
+
++/* Returns mmap_min_addr sysctl tunable from procfs */
++static unsigned long long get_mmap_min_addr(void)
++{
++ FILE *fp;
++ int n_matched;
++ static unsigned long long addr;
++
++ if (addr)
++ return addr;
++
++ fp = fopen("/proc/sys/vm/mmap_min_addr", "r");
++ if (fp == NULL) {
++ ksft_print_msg("Failed to open /proc/sys/vm/mmap_min_addr: %s\n",
++ strerror(errno));
++ exit(KSFT_SKIP);
++ }
++
++ n_matched = fscanf(fp, "%llu", &addr);
++ if (n_matched != 1) {
++ ksft_print_msg("Failed to read /proc/sys/vm/mmap_min_addr: %s\n",
++ strerror(errno));
++ fclose(fp);
++ exit(KSFT_SKIP);
++ }
++
++ fclose(fp);
++ return addr;
++}
++
+ /*
+ * Returns the start address of the mapping on success, else returns
+ * NULL on failure.
+@@ -71,8 +101,15 @@ static void *get_source_mapping(struct config c)
+ {
+ unsigned long long addr = 0ULL;
+ void *src_addr = NULL;
++ unsigned long long mmap_min_addr;
++
++ mmap_min_addr = get_mmap_min_addr();
++
+ retry:
+ addr += c.src_alignment;
++ if (addr < mmap_min_addr)
++ goto retry;
++
+ src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE,
+ MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
+ -1, 0);
+@@ -90,8 +127,10 @@ static void *get_source_mapping(struct config c)
+ * alignment in the tests.
+ */
+ if (((unsigned long long) src_addr & (c.src_alignment - 1)) ||
+- !((unsigned long long) src_addr & c.src_alignment))
++ !((unsigned long long) src_addr & c.src_alignment)) {
++ munmap(src_addr, c.region_size);
+ goto retry;
++ }
+
+ if (!src_addr)
+ goto error;
+--
+2.35.1
+
--- /dev/null
+From 72c1a2eb210f25d6ade47e308f3fad226e922b28 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 16:35:52 -0700
+Subject: selftest/vm: verify remap destination address in mremap_test
+
+From: Sidhartha Kumar <sidhartha.kumar@oracle.com>
+
+[ Upstream commit 18d609daa546c919fd36b62a7b510c18de4b4af8 ]
+
+Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
+existing mappings. This causes a segfault when regions such as text are
+remapped and the permissions are changed.
+
+Verify the requested mremap destination address does not overlap any
+existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
+incrementing the destination address until a valid mapping is found or
+fail the current test once the max address is reached.
+
+Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
+Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
+Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/testing/selftests/vm/mremap_test.c | 42 ++++++++++++++++++++++--
+ 1 file changed, 39 insertions(+), 3 deletions(-)
+
+diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c
+index 9a518fee6306..58775dab3cc6 100644
+--- a/tools/testing/selftests/vm/mremap_test.c
++++ b/tools/testing/selftests/vm/mremap_test.c
+@@ -10,6 +10,7 @@
+ #include <string.h>
+ #include <sys/mman.h>
+ #include <time.h>
++#include <stdbool.h>
+
+ #include "../kselftest.h"
+
+@@ -64,6 +65,30 @@ enum {
+ .expect_failure = should_fail \
+ }
+
++/*
++ * Returns false if the requested remap region overlaps with an
++ * existing mapping (e.g text, stack) else returns true.
++ */
++static bool is_remap_region_valid(void *addr, unsigned long long size)
++{
++ void *remap_addr = NULL;
++ bool ret = true;
++
++ /* Use MAP_FIXED_NOREPLACE flag to ensure region is not mapped */
++ remap_addr = mmap(addr, size, PROT_READ | PROT_WRITE,
++ MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
++ -1, 0);
++
++ if (remap_addr == MAP_FAILED) {
++ if (errno == EEXIST)
++ ret = false;
++ } else {
++ munmap(remap_addr, size);
++ }
++
++ return ret;
++}
++
+ /* Returns mmap_min_addr sysctl tunable from procfs */
+ static unsigned long long get_mmap_min_addr(void)
+ {
+@@ -111,8 +136,8 @@ static void *get_source_mapping(struct config c)
+ goto retry;
+
+ src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE,
+- MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
+- -1, 0);
++ MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
++ -1, 0);
+ if (src_addr == MAP_FAILED) {
+ if (errno == EPERM || errno == EEXIST)
+ goto retry;
+@@ -179,9 +204,20 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
+ if (!((unsigned long long) addr & c.dest_alignment))
+ addr = (void *) ((unsigned long long) addr | c.dest_alignment);
+
++ /* Don't destroy existing mappings unless expected to overlap */
++ while (!is_remap_region_valid(addr, c.region_size) && !c.overlapping) {
++ /* Check for unsigned overflow */
++ if (addr + c.dest_alignment < addr) {
++ ksft_print_msg("Couldn't find a valid region to remap to\n");
++ ret = -1;
++ goto out;
++ }
++ addr += c.dest_alignment;
++ }
++
+ clock_gettime(CLOCK_MONOTONIC, &t_start);
+ dest_addr = mremap(src_addr, c.region_size, c.region_size,
+- MREMAP_MAYMOVE|MREMAP_FIXED, (char *) addr);
++ MREMAP_MAYMOVE|MREMAP_FIXED, (char *) addr);
+ clock_gettime(CLOCK_MONOTONIC, &t_end);
+
+ if (dest_addr == MAP_FAILED) {
+--
+2.35.1
+
x86-pci-xen-disable-pci-msi-masking-for-xen_hvm-guests.patch
iocost-don-t-reset-the-inuse-weight-of-under-weighted-debtors.patch
virtio_net-fix-wrong-buf-address-calculation-when-using-xdp.patch
+cpufreq-qcom-hw-drop-affinity-hint-before-freeing-th.patch
+cpufreq-qcom-hw-fix-the-race-between-lmh-worker-and-.patch
+cpufreq-qcom-hw-fix-the-opp-entries-refcounting.patch
+cpufreq-qcom-cpufreq-hw-fix-throttle-frequency-value.patch
+video-fbdev-udlfb-properly-check-endpoint-type.patch
+arm64-dts-meson-remove-cpu-opps-below-1ghz-for-g12b-.patch
+arm64-dts-meson-remove-cpu-opps-below-1ghz-for-sm1-b.patch
+iio-dac-ad3552r-fix-signedness-bug-in-ad3552r_reset.patch
+iio-imu-bmi160-disable-regulator-in-error-path.patch
+iio-filter-admv8818-select-regmap_spi-for-admv8818.patch
+mtd-rawnand-fix-ecc-parameters-for-mt7622.patch
+tee-optee-add-missing-mutext_destroy-in-optee_ffa_pr.patch
+xsk-fix-l2fwd-for-copy-mode-busy-poll-combo.patch
+arm64-dts-imx8qm-correct-scu-clock-controller-s-comp.patch
+usb-fix-xhci-event-ring-dequeue-pointer-erdp-update-.patch
+soc-imx-imx8m-blk-ctrl-fix-imx8mn_dispblk_pd_isi-han.patch
+arm-dts-imx6qdl-apalis-fix-sgtl5000-detection-issue.patch
+iio-dac-ad3552r-fix-an-is_err-vs-null-check.patch
+arm64-dts-imx8mq-tqma8mq-change-the-spi-nor-tx.patch
+arm64-dts-imx8mn-fix-sai-nodes.patch
+arm64-dts-meson-sm1-bananapi-m5-fix-wrong-gpio-pin-l.patch
+phy-samsung-fix-missing-of_node_put-in-exynos_sata_p.patch
+phy-samsung-exynos5250-sata-fix-missing-device-put-i.patch
+arm-omap2-fix-refcount-leak-in-omap_gic_of_init.patch
+bus-ti-sysc-make-omap3-gpt12-quirk-handling-soc-spec.patch
+arm-dts-dra7-fix-suspend-warning-for-vpe-powerdomain.patch
+phy-ti-omap-usb2-fix-error-handling-in-omap_usb2_ena.patch
+arm-dts-at91-map-mclk-for-wm8731-on-at91sam9g20ek.patch
+arm-dts-at91-sama5d4_xplained-fix-pinctrl-phandle-na.patch
+arm-dts-at91-fix-pinctrl-phandles.patch
+phy-mapphone-mdm6600-fix-pm-error-handling-in-phy_md.patch
+phy-ti-add-missing-pm_runtime_disable-in-serdes_am65.patch
+interconnect-qcom-sc7180-drop-ip0-interconnects.patch
+interconnect-qcom-sdx55-drop-ip0-interconnects.patch
+arm-dts-fix-mmc-order-for-omap3-gta04.patch
+arm-dts-am33xx-l4-add-missing-touchscreen-clock-prop.patch
+arm-dts-am3517-evm-fix-misc-pinmuxing.patch
+arm-dts-logicpd-som-lv-fix-wrong-pinmuxing-on-omap35.patch
+pinctrl-qcom-sm6350-fix-order-of-ufs-sdc-pins.patch
+ipvs-correctly-print-the-memory-size-of-ip_vs_conn_t.patch
+phy-amlogic-fix-error-path-in-phy_g12a_usb3_pcie_pro.patch
+pinctrl-mediatek-moore-fix-build-error.patch
+mtd-rawnand-fix-return-value-check-of-wait_for_compl.patch
+mtd-fix-part-field-data-corruption-in-mtd_info.patch
+pinctrl-stm32-do-not-call-stm32_gpio_get-for-edge-tr.patch
+memory-renesas-rpc-if-fix-hf-ospi-data-transfer-in-m.patch
+net-dsa-add-missing-of_node_put-in-dsa_port_link_reg.patch
+netfilter-nft_set_rbtree-overlap-detection-with-elem.patch
+bpf-lwt-fix-crash-when-using-bpf_skb_set_tunnel_key-.patch
+pinctrl-rockchip-fix-rk3308-pinmux-bits.patch
+tcp-md5-incorrect-tcp_header_len-for-incoming-connec.patch
+pinctrl-stm32-keep-pinctrl-block-clock-enabled-when-.patch
+tcp-ensure-to-use-the-most-recently-sent-skb-when-fi.patch
+wireguard-device-check-for-metadata_dst-with-skb_val.patch
+sctp-check-asoc-strreset_chunk-in-sctp_generate_reco.patch
+arm-dts-imx6ull-colibri-fix-vqmmc-regulator.patch
+arm64-dts-imx8mn-ddr4-evk-describe-the-32.768-khz-pm.patch
+pinctrl-pistachio-fix-use-of-irq_of_parse_and_map.patch
+cpufreq-fix-memory-leak-in-sun50i_cpufreq_nvmem_prob.patch
+net-hns3-clear-inited-state-and-stop-client-after-fa.patch
+net-hns3-fix-error-log-of-tx-rx-tqps-stats.patch
+net-hns3-modify-the-return-code-of-hclge_get_ring_ch.patch
+net-hns3-add-validity-check-for-message-data-length.patch
+net-hns3-add-return-value-for-mailbox-handling-in-pf.patch
+net-smc-sync-err-code-when-tcp-connection-was-refuse.patch
+net-lan966x-fix-a-couple-off-by-one-bugs.patch
+ip_gre-make-o_seqno-start-from-0-in-native-mode.patch
+ip6_gre-make-o_seqno-start-from-0-in-native-mode.patch
+ip_gre-ip6_gre-fix-race-condition-on-o_seqno-in-coll.patch
+tcp-fix-potential-xmit-stalls-caused-by-tcp_notsent_.patch
+tcp-make-sure-treq-af_specific-is-initialized.patch
+bus-sunxi-rsb-fix-the-return-value-of-sunxi_rsb_devi.patch
+clk-sunxi-sun9i-mmc-check-return-value-after-calling.patch
+cpufreq-qcom-cpufreq-hw-clear-dcvs-interrupts.patch
+mctp-defer-the-kfree-of-object-mdev-addrs.patch
+net-bcmgenet-hide-status-block-before-tx-timestampin.patch
+net-phy-marvell10g-fix-return-value-on-error.patch
+net-dsa-mv88e6xxx-fix-port_hidden_wait-to-account-fo.patch
+drm-sun4i-remove-obsolete-references-to-phys_offset.patch
+ice-wait-5-s-for-emp-reset-after-firmware-flash.patch
+bluetooth-hci_event-fix-checking-for-invalid-handle-.patch
+net-dsa-lantiq_gswip-don-t-set-gswip_mii_cfg_rmii_cl.patch
+io_uring-check-reserved-fields-for-send-sendmsg.patch
+io_uring-check-reserved-fields-for-recv-recvmsg.patch
+netfilter-nf_conntrack_tcp-re-init-for-syn-packets-o.patch
+netfilter-conntrack-fix-udp-offload-timeout-sysctl.patch
+platform-x86-asus-wmi-potential-buffer-overflow-in-a.patch
+platform-x86-asus-wmi-fix-driver-not-binding-when-fa.patch
+drm-amdkfd-fix-gws-queue-count.patch
+drm-amd-display-fix-memory-leak-in-dcn21_clock_sourc.patch
+tls-skip-tls_append_frag-on-zero-copy-size.patch
+bnx2x-fix-napi-api-usage-sequence.patch
+net-fec-add-missing-of_node_put-in-fec_enet_init_sto.patch
+gfs2-minor-retry-logic-cleanup.patch
+gfs2-make-sure-not-to-return-short-direct-writes.patch
+gfs2-no-short-reads-or-writes-upon-glock-contention.patch
+perf-arm-spe-fix-addresses-of-synthesized-spe-events.patch
+ixgbe-ensure-ipsec-vf-pf-compatibility.patch
+net-enetc-allow-tc-etf-offload-even-with-netif_f_csu.patch
+revert-ibmvnic-add-ethtool-private-flag-for-driver-d.patch
+tcp-fix-f-rto-may-not-work-correctly-when-receiving-.patch
+io_uring-fix-uninitialized-field-in-rw-io_kiocb.patch
+asoc-soc-pcm-use-gfp_kernel-when-the-code-is-sleepab.patch
+asoc-cs35l41-fix-a-shift-out-of-bounds-warning-found.patch
+asoc-rt711-5682-check-if-bus-is-active-before-deferr.patch
+asoc-intel-soc-acpi-correct-device-endpoints-for-max.patch
+asoc-wm8731-disable-the-regulator-when-probing-fails.patch
+asoc-intel-sof_es8336-add-a-quirk-for-huawei-mateboo.patch
+input-cypress-sf-register-a-callback-to-disable-the-.patch
+ext4-fix-bug_on-in-start_this_handle-during-umount-f.patch
+arch-xtensa-platforms-fix-deadlock-in-rs_close.patch
+ksmbd-increment-reference-count-of-parent-fp.patch
+ksmbd-set-fixed-sector-size-to-fs_sector_size_inform.patch
+erofs-fix-use-after-free-of-on-stack-io.patch
+bonding-do-not-discard-lowest-hash-bit-for-non-layer.patch
+x86-__memcpy_flushcache-fix-wrong-alignment-if-size-.patch
+cifs-destage-any-unwritten-data-to-the-server-before.patch
+drivers-net-hippi-fix-deadlock-in-rr_close.patch
+powerpc-perf-fix-32bit-compile.patch
+alsa-hda-intel-dsp-config-add-raptorlake-pci-ids.patch
+selftest-vm-verify-mmap-addr-in-mremap_test.patch
+selftest-vm-verify-remap-destination-address-in-mrem.patch
--- /dev/null
+From 491a857be57649baf4dd83ffe5b1cc7664a53267 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 20 Mar 2022 15:52:12 -0500
+Subject: soc: imx: imx8m-blk-ctrl: Fix IMX8MN_DISPBLK_PD_ISI hang
+
+From: Adam Ford <aford173@gmail.com>
+
+[ Upstream commit e2aa165cd0163cef83cb295eb572aa9fb1604cf4 ]
+
+The imx8mn clock list for the ISI lists four clocks, but DOMAIN_MAX_CLKS
+was set to 3. Because of this, attempts to enable the fourth clock failed,
+threw some splat, and ultimately hung.
+
+Fixes: 7f511d514e8c ("soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl")
+Signed-off-by: Adam Ford <aford173@gmail.com>
+Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/soc/imx/imx8m-blk-ctrl.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
+index 511e74f0db8a..e096cca9f18a 100644
+--- a/drivers/soc/imx/imx8m-blk-ctrl.c
++++ b/drivers/soc/imx/imx8m-blk-ctrl.c
+@@ -49,7 +49,7 @@ struct imx8m_blk_ctrl_domain_data {
+ u32 mipi_phy_rst_mask;
+ };
+
+-#define DOMAIN_MAX_CLKS 3
++#define DOMAIN_MAX_CLKS 4
+
+ struct imx8m_blk_ctrl_domain {
+ struct generic_pm_domain genpd;
+--
+2.35.1
+
--- /dev/null
+From c5aeaea5e9e3424668212deca0480975d1772954 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 10:34:41 +0800
+Subject: tcp: ensure to use the most recently sent skb when filling the rate
+ sample
+
+From: Pengcheng Yang <yangpc@wangsu.com>
+
+[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]
+
+If an ACK (s)acks multiple skbs, we favor the information
+from the most recently sent skb by choosing the skb with
+the highest prior_delivered count. But in the interval
+between receiving ACKs, we send multiple skbs with the same
+prior_delivered, because the tp->delivered only changes
+when we receive an ACK.
+
+We used RACK's solution, copying tcp_rack_sent_after() as
+tcp_skb_sent_after() helper to determine "which packet was
+sent last?". Later, we will use tcp_skb_sent_after() instead
+in RACK.
+
+Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
+Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
+Cc: Paolo Abeni <pabeni@redhat.com>
+Acked-by: Neal Cardwell <ncardwell@google.com>
+Tested-by: Neal Cardwell <ncardwell@google.com>
+Reviewed-by: Eric Dumazet <edumazet@google.com>
+Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/net/tcp.h | 6 ++++++
+ net/ipv4/tcp_rate.c | 11 ++++++++---
+ 2 files changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/include/net/tcp.h b/include/net/tcp.h
+index b9fc978fb2ca..9f459e8f1689 100644
+--- a/include/net/tcp.h
++++ b/include/net/tcp.h
+@@ -1042,6 +1042,7 @@ struct rate_sample {
+ int losses; /* number of packets marked lost upon ACK */
+ u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */
+ u32 prior_in_flight; /* in flight before this ACK */
++ u32 last_end_seq; /* end_seq of most recently ACKed packet */
+ bool is_app_limited; /* is sample from packet with bubble in pipe? */
+ bool is_retrans; /* is sample from retransmission? */
+ bool is_ack_delayed; /* is this (likely) a delayed ACK? */
+@@ -1164,6 +1165,11 @@ void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost,
+ bool is_sack_reneg, struct rate_sample *rs);
+ void tcp_rate_check_app_limited(struct sock *sk);
+
++static inline bool tcp_skb_sent_after(u64 t1, u64 t2, u32 seq1, u32 seq2)
++{
++ return t1 > t2 || (t1 == t2 && after(seq1, seq2));
++}
++
+ /* These functions determine how the current flow behaves in respect of SACK
+ * handling. SACK is negotiated with the peer, and therefore it can vary
+ * between different flows.
+diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c
+index fbab921670cc..9a8e014d9b5b 100644
+--- a/net/ipv4/tcp_rate.c
++++ b/net/ipv4/tcp_rate.c
+@@ -74,27 +74,32 @@ void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb)
+ *
+ * If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is
+ * called multiple times. We favor the information from the most recently
+- * sent skb, i.e., the skb with the highest prior_delivered count.
++ * sent skb, i.e., the skb with the most recently sent time and the highest
++ * sequence.
+ */
+ void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb,
+ struct rate_sample *rs)
+ {
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
++ u64 tx_tstamp;
+
+ if (!scb->tx.delivered_mstamp)
+ return;
+
++ tx_tstamp = tcp_skb_timestamp_us(skb);
+ if (!rs->prior_delivered ||
+- after(scb->tx.delivered, rs->prior_delivered)) {
++ tcp_skb_sent_after(tx_tstamp, tp->first_tx_mstamp,
++ scb->end_seq, rs->last_end_seq)) {
+ rs->prior_delivered_ce = scb->tx.delivered_ce;
+ rs->prior_delivered = scb->tx.delivered;
+ rs->prior_mstamp = scb->tx.delivered_mstamp;
+ rs->is_app_limited = scb->tx.is_app_limited;
+ rs->is_retrans = scb->sacked & TCPCB_RETRANS;
++ rs->last_end_seq = scb->end_seq;
+
+ /* Record send time of most recently ACKed packet: */
+- tp->first_tx_mstamp = tcp_skb_timestamp_us(skb);
++ tp->first_tx_mstamp = tx_tstamp;
+ /* Find the duration of the "send phase" of this window: */
+ rs->interval_us = tcp_stamp_us_delta(tp->first_tx_mstamp,
+ scb->tx.first_tx_mstamp);
+--
+2.35.1
+
--- /dev/null
+From 40e8f0bc68076dddd698c2feb0c4ba7e85b4f378 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 26 Apr 2022 18:03:39 +0800
+Subject: tcp: fix F-RTO may not work correctly when receiving DSACK
+
+From: Pengcheng Yang <yangpc@wangsu.com>
+
+[ Upstream commit d9157f6806d1499e173770df1f1b234763de5c79 ]
+
+Currently DSACK is regarded as a dupack, which may cause
+F-RTO to incorrectly enter "loss was real" when receiving
+DSACK.
+
+Packetdrill to demonstrate:
+
+// Enable F-RTO and TLP
+ 0 `sysctl -q net.ipv4.tcp_frto=2`
+ 0 `sysctl -q net.ipv4.tcp_early_retrans=3`
+ 0 `sysctl -q net.ipv4.tcp_congestion_control=cubic`
+
+// Establish a connection
+ +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+ +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+ +0 bind(3, ..., ...) = 0
+ +0 listen(3, 1) = 0
+
+// RTT 10ms, RTO 210ms
+ +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+ +0 > S. 0:0(0) ack 1 <...>
+ +.01 < . 1:1(0) ack 1 win 257
+ +0 accept(3, ..., ...) = 4
+
+// Send 2 data segments
+ +0 write(4, ..., 2000) = 2000
+ +0 > P. 1:2001(2000) ack 1
+
+// TLP
++.022 > P. 1001:2001(1000) ack 1
+
+// Continue to send 8 data segments
+ +0 write(4, ..., 10000) = 10000
+ +0 > P. 2001:10001(8000) ack 1
+
+// RTO
++.188 > . 1:1001(1000) ack 1
+
+// The original data is acked and new data is sent(F-RTO step 2.b)
+ +0 < . 1:1(0) ack 2001 win 257
+ +0 > P. 10001:12001(2000) ack 1
+
+// D-SACK caused by TLP is regarded as a dupack, this results in
+// the incorrect judgment of "loss was real"(F-RTO step 3.a)
++.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>
+
+// Never-retransmitted data(3001:4001) are acked and
+// expect to switch to open state(F-RTO step 3.b)
+ +0 < . 1:1(0) ack 4001 win 257
++0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%
+
+Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO")
+Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
+Acked-by: Neal Cardwell <ncardwell@google.com>
+Tested-by: Neal Cardwell <ncardwell@google.com>
+Reviewed-by: Eric Dumazet <edumazet@google.com>
+Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/ipv4/tcp_input.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
+index 525bf37c0fdb..7bf84ce34d9e 100644
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -3867,7 +3867,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
+ tcp_process_tlp_ack(sk, ack, flag);
+
+ if (tcp_ack_is_dubious(sk, flag)) {
+- if (!(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP))) {
++ if (!(flag & (FLAG_SND_UNA_ADVANCED |
++ FLAG_NOT_DUP | FLAG_DSACKING_ACK))) {
+ num_dupack = 1;
+ /* Consider if pure acks were aggregated in tcp_add_backlog() */
+ if (!(flag & FLAG_DATA))
+--
+2.35.1
+
--- /dev/null
+From c47bd01e9e5770f542a4cc6e0c02442468607ef4 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 17:34:07 -0700
+Subject: tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
+
+From: Eric Dumazet <edumazet@google.com>
+
+[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ]
+
+I had this bug sitting for too long in my pile, it is time to fix it.
+
+Thanks to Doug Porter for reminding me of it!
+
+We had various attempts in the past, including commit
+0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
+but the issue is that TCP stack currently only generates
+EPOLLOUT from input path, when tp->snd_una has advanced
+and skb(s) cleaned from rtx queue.
+
+If a flow has a big RTT, and/or receives SACKs, it is possible
+that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
+and no more data can be sent until tp->snd_una finally advances.
+
+What is needed is to also check if POLLOUT needs to be generated
+whenever tp->snd_nxt is advanced, from output path.
+
+This bug triggers more often after an idle period, as
+we do not receive ACK for at least one RTT. tcp_notsent_lowat
+could be a fraction of what CWND and pacing rate would allow to
+send during this RTT.
+
+In a followup patch, I will remove the bogus call
+to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
+from tcp_check_space(). Fact that we have decided to generate
+an EPOLLOUT does not mean the application has immediately
+refilled the transmit queue. This optimistic call
+might have been the reason the bug seemed not too serious.
+
+Tested:
+
+200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]
+
+$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
+$ cat bench_rr.sh
+SUM=0
+for i in {1..10}
+do
+ V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
+ echo $V
+ SUM=$(($SUM + $V))
+done
+echo SUM=$SUM
+
+Before patch:
+$ bench_rr.sh
+130000000
+80000000
+140000000
+140000000
+140000000
+140000000
+130000000
+40000000
+90000000
+110000000
+SUM=1140000000
+
+After patch:
+$ bench_rr.sh
+430000000
+590000000
+530000000
+450000000
+450000000
+350000000
+450000000
+490000000
+480000000
+460000000
+SUM=4680000000 # This is 410 % of the value before patch.
+
+Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
+Signed-off-by: Eric Dumazet <edumazet@google.com>
+Reported-by: Doug Porter <dsp@fb.com>
+Cc: Soheil Hassas Yeganeh <soheil@google.com>
+Cc: Neal Cardwell <ncardwell@google.com>
+Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/net/tcp.h | 1 +
+ net/ipv4/tcp_input.c | 12 +++++++++++-
+ net/ipv4/tcp_output.c | 1 +
+ 3 files changed, 13 insertions(+), 1 deletion(-)
+
+diff --git a/include/net/tcp.h b/include/net/tcp.h
+index 9f459e8f1689..40c05972178b 100644
+--- a/include/net/tcp.h
++++ b/include/net/tcp.h
+@@ -620,6 +620,7 @@ void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req);
+ void tcp_reset(struct sock *sk, struct sk_buff *skb);
+ void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb);
+ void tcp_fin(struct sock *sk);
++void tcp_check_space(struct sock *sk);
+
+ /* tcp_timer.c */
+ void tcp_init_xmit_timers(struct sock *);
+diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
+index bfe4112e000c..525bf37c0fdb 100644
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -5437,7 +5437,17 @@ static void tcp_new_space(struct sock *sk)
+ INDIRECT_CALL_1(sk->sk_write_space, sk_stream_write_space, sk);
+ }
+
+-static void tcp_check_space(struct sock *sk)
++/* Caller made space either from:
++ * 1) Freeing skbs in rtx queues (after tp->snd_una has advanced)
++ * 2) Sent skbs from output queue (and thus advancing tp->snd_nxt)
++ *
++ * We might be able to generate EPOLLOUT to the application if:
++ * 1) Space consumed in output/rtx queues is below sk->sk_sndbuf/2
++ * 2) notsent amount (tp->write_seq - tp->snd_nxt) became
++ * small enough that tcp_stream_memory_free() decides it
++ * is time to generate EPOLLOUT.
++ */
++void tcp_check_space(struct sock *sk)
+ {
+ /* pairs with tcp_poll() */
+ smp_mb();
+diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
+index 257780f93305..0b5eab685154 100644
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -82,6 +82,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
+
+ NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPORIGDATASENT,
+ tcp_skb_pcount(skb));
++ tcp_check_space(sk);
+ }
+
+ /* SND.NXT, if window was not shrunk or the amount of shrunk was less than one
+--
+2.35.1
+
--- /dev/null
+From f00e14efc4983e0ca9ccdf6a58dc9f4949afc813 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Sun, 24 Apr 2022 13:35:09 -0700
+Subject: tcp: make sure treq->af_specific is initialized
+
+From: Eric Dumazet <edumazet@google.com>
+
+[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ]
+
+syzbot complained about a recent change in TCP stack,
+hitting a NULL pointer [1]
+
+tcp request sockets have an af_specific pointer, which
+was used before the blamed change only for SYNACK generation
+in non SYNCOOKIE mode.
+
+tcp requests sockets momentarily created when third packet
+coming from client in SYNCOOKIE mode were not using
+treq->af_specific.
+
+Make sure this field is populated, in the same way normal
+TCP requests sockets do in tcp_conn_request().
+
+[1]
+TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters.
+general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
+KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
+CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0
+Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
+RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
+Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
+RSP: 0018:ffffc90000de0588 EFLAGS: 00010202
+RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100
+RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008
+RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000
+R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0
+R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000
+FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
+CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
+CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0
+DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
+Call Trace:
+ <IRQ>
+ tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
+ tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
+ cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
+ tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
+ tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
+ tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
+ ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
+ ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
+ NF_HOOK include/linux/netfilter.h:307 [inline]
+ NF_HOOK include/linux/netfilter.h:301 [inline]
+ ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
+ dst_input include/net/dst.h:461 [inline]
+ ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
+ NF_HOOK include/linux/netfilter.h:307 [inline]
+ NF_HOOK include/linux/netfilter.h:301 [inline]
+ ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
+ __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
+ __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
+ process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
+ __napi_poll+0xb3/0x6e0 net/core/dev.c:6413
+ napi_poll net/core/dev.c:6480 [inline]
+ net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
+ __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
+ invoke_softirq kernel/softirq.c:432 [inline]
+ __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
+ irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
+ sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
+
+Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections")
+Signed-off-by: Eric Dumazet <edumazet@google.com>
+Cc: Francesco Ruggeri <fruggeri@arista.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/net/tcp.h | 1 +
+ net/ipv4/syncookies.c | 8 +++++++-
+ net/ipv6/syncookies.c | 3 ++-
+ 3 files changed, 10 insertions(+), 2 deletions(-)
+
+diff --git a/include/net/tcp.h b/include/net/tcp.h
+index 40c05972178b..a3fe2f9bc01c 100644
+--- a/include/net/tcp.h
++++ b/include/net/tcp.h
+@@ -480,6 +480,7 @@ int __cookie_v4_check(const struct iphdr *iph, const struct tcphdr *th,
+ u32 cookie);
+ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb);
+ struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops,
++ const struct tcp_request_sock_ops *af_ops,
+ struct sock *sk, struct sk_buff *skb);
+ #ifdef CONFIG_SYN_COOKIES
+
+diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
+index 2cb3b852d148..f33c31dd7366 100644
+--- a/net/ipv4/syncookies.c
++++ b/net/ipv4/syncookies.c
+@@ -281,6 +281,7 @@ bool cookie_ecn_ok(const struct tcp_options_received *tcp_opt,
+ EXPORT_SYMBOL(cookie_ecn_ok);
+
+ struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops,
++ const struct tcp_request_sock_ops *af_ops,
+ struct sock *sk,
+ struct sk_buff *skb)
+ {
+@@ -297,6 +298,10 @@ struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops,
+ return NULL;
+
+ treq = tcp_rsk(req);
++
++ /* treq->af_specific might be used to perform TCP_MD5 lookup */
++ treq->af_specific = af_ops;
++
+ treq->syn_tos = TCP_SKB_CB(skb)->ip_dsfield;
+ #if IS_ENABLED(CONFIG_MPTCP)
+ treq->is_mptcp = sk_is_mptcp(sk);
+@@ -364,7 +369,8 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb)
+ goto out;
+
+ ret = NULL;
+- req = cookie_tcp_reqsk_alloc(&tcp_request_sock_ops, sk, skb);
++ req = cookie_tcp_reqsk_alloc(&tcp_request_sock_ops,
++ &tcp_request_sock_ipv4_ops, sk, skb);
+ if (!req)
+ goto out;
+
+diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
+index d1b61d00368e..9cc123f000fb 100644
+--- a/net/ipv6/syncookies.c
++++ b/net/ipv6/syncookies.c
+@@ -170,7 +170,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
+ goto out;
+
+ ret = NULL;
+- req = cookie_tcp_reqsk_alloc(&tcp6_request_sock_ops, sk, skb);
++ req = cookie_tcp_reqsk_alloc(&tcp6_request_sock_ops,
++ &tcp_request_sock_ipv6_ops, sk, skb);
+ if (!req)
+ goto out;
+
+--
+2.35.1
+
--- /dev/null
+From 3ad225bd4cf79f4b6b8df538a6219db4dd2ee173 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 20 Apr 2022 17:50:26 -0700
+Subject: tcp: md5: incorrect tcp_header_len for incoming connections
+
+From: Francesco Ruggeri <fruggeri@arista.com>
+
+[ Upstream commit 5b0b9e4c2c895227c8852488b3f09839233bba54 ]
+
+In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
+remote address in newsk. But that address is still 0 in newsk at this
+point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
+Use the address from the request socket instead.
+
+Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
+Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
+Reviewed-by: Eric Dumazet <edumazet@google.com>
+Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/ipv4/tcp_minisocks.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
+index 7c2d3ac2363a..492737d2b7d3 100644
+--- a/net/ipv4/tcp_minisocks.c
++++ b/net/ipv4/tcp_minisocks.c
+@@ -531,7 +531,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk,
+ newtp->tsoffset = treq->ts_off;
+ #ifdef CONFIG_TCP_MD5SIG
+ newtp->md5sig_info = NULL; /*XXX*/
+- if (newtp->af_specific->md5_lookup(sk, newsk))
++ if (treq->af_specific->req_md5_lookup(sk, req_to_sk(req)))
+ newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
+ #endif
+ if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
+--
+2.35.1
+
--- /dev/null
+From 555d9e87e6f5802a244cf6e20a3934168773bf66 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 16 Mar 2022 21:50:47 +0800
+Subject: tee: optee: add missing mutext_destroy in optee_ffa_probe
+
+From: Dongliang Mu <mudongliangabcd@gmail.com>
+
+[ Upstream commit b5e22886839ae466fcf03295150094516c0fd8eb ]
+
+The error handling code of optee_ffa_probe misses the mutex_destroy of
+ffa.mutex when mutext_init succeeds.
+
+Fix this by adding mutex_destory of ffa.mutex at the error handling part
+
+Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
+Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
+Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/tee/optee/ffa_abi.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
+index f744ab15bf2c..30a6119a2b16 100644
+--- a/drivers/tee/optee/ffa_abi.c
++++ b/drivers/tee/optee/ffa_abi.c
+@@ -894,6 +894,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
+ rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
+ optee_supp_uninit(&optee->supp);
+ mutex_destroy(&optee->call_queue.mutex);
++ mutex_destroy(&optee->ffa.mutex);
+ err_unreg_supp_teedev:
+ tee_device_unregister(optee->supp_teedev);
+ err_unreg_teedev:
+--
+2.35.1
+
--- /dev/null
+From bdb52280cd468abdb0ae6d883d12573823d61b03 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 26 Apr 2022 18:49:49 +0300
+Subject: tls: Skip tls_append_frag on zero copy size
+
+From: Maxim Mikityanskiy <maximmi@nvidia.com>
+
+[ Upstream commit a0df71948e9548de819a6f1da68f5f1742258a52 ]
+
+Calling tls_append_frag when max_open_record_len == record->len might
+add an empty fragment to the TLS record if the call happens to be on the
+page boundary. Normally tls_append_frag coalesces the zero-sized
+fragment to the previous one, but not if it's on page boundary.
+
+If a resync happens then, the mlx5 driver posts dump WQEs in
+tx_post_resync_dump, and the empty fragment may become a data segment
+with byte_count == 0, which will confuse the NIC and lead to a CQE
+error.
+
+This commit fixes the described issue by skipping tls_append_frag on
+zero size to avoid adding empty fragments. The fix is not in the driver,
+because an empty fragment is hardly the desired behavior.
+
+Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
+Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
+Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
+Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/tls/tls_device.c | 12 +++++++-----
+ 1 file changed, 7 insertions(+), 5 deletions(-)
+
+diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c
+index b932469ee69c..a40553e83f8b 100644
+--- a/net/tls/tls_device.c
++++ b/net/tls/tls_device.c
+@@ -483,11 +483,13 @@ static int tls_push_data(struct sock *sk,
+ copy = min_t(size_t, size, (pfrag->size - pfrag->offset));
+ copy = min_t(size_t, copy, (max_open_record_len - record->len));
+
+- rc = tls_device_copy_data(page_address(pfrag->page) +
+- pfrag->offset, copy, msg_iter);
+- if (rc)
+- goto handle_error;
+- tls_append_frag(record, pfrag, copy);
++ if (copy) {
++ rc = tls_device_copy_data(page_address(pfrag->page) +
++ pfrag->offset, copy, msg_iter);
++ if (rc)
++ goto handle_error;
++ tls_append_frag(record, pfrag, copy);
++ }
+
+ size -= copy;
+ if (!size) {
+--
+2.35.1
+
--- /dev/null
+From bb4337fdb6f04642fdf4e8f4e6d87fe826eb7df6 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Fri, 8 Apr 2022 16:48:21 +0300
+Subject: USB: Fix xhci event ring dequeue pointer ERDP update issue
+
+From: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
+
+[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ]
+
+In some situations software handles TRB events slower than adding TRBs.
+If the number of TRB events to be processed in a given interrupt is exactly
+the same as the event ring size 256, then the local variable
+"event_ring_deq" that holds the initial dequeue position is equal to
+software_dequeue after handling all 256 interrupts.
+
+It will cause driver to not update ERDP to hardware,
+
+Software dequeue pointer is out of sync with ERDP on interrupt exit.
+On the next interrupt, the event ring may full but driver will not
+update ERDP as software_dequeue is equal to ERDP.
+
+[ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
+[ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
+[ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
+[ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
+[ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
+[ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
+[ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
+[ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
+[ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD
+
+Hardware ERDP is updated mid event handling if there are more than 128
+events in an interrupt (half of ring size).
+Fix this by updating the software local variable at the same time as
+hardware ERDP.
+
+[commit message rewording -Mathias]
+
+Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose")
+Reviewed-by: Peter Chen <peter.chen@kernel.org>
+Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
+Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
+Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/host/xhci-ring.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
+index d0b6806275e0..f9707997969d 100644
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -3141,6 +3141,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
+ if (event_loop++ < TRBS_PER_SEGMENT / 2)
+ continue;
+ xhci_update_erst_dequeue(xhci, event_ring_deq);
++ event_ring_deq = xhci->event_ring->dequeue;
+
+ /* ring is half-full, force isoc trbs to interrupt more often */
+ if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
+--
+2.35.1
+
--- /dev/null
+From 7a6d20de15da7d7d509eba1c2ea5160808e85e5c Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 22 Mar 2022 23:04:38 +0300
+Subject: video: fbdev: udlfb: properly check endpoint type
+
+From: Pavel Skripkin <paskripkin@gmail.com>
+
+[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]
+
+syzbot reported warning in usb_submit_urb, which is caused by wrong
+endpoint type.
+
+This driver uses out bulk endpoint for communication, so
+let's check if this endpoint is present and bail out early if not.
+
+Fail log:
+
+usb 1-1: BOGUS urb xfer, pipe 3 != type 1
+WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
+Modules linked in:
+CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0
+...
+Workqueue: usb_hub_wq hub_event
+RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
+...
+Call Trace:
+ dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969
+ dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
+ dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110
+ dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732
+ usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
+
+Fixes: 88e58b1a42f8 ("Staging: add udlfb driver")
+Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com
+Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
+Signed-off-by: Helge Deller <deller@gmx.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/video/fbdev/udlfb.c | 14 ++++++++++++--
+ 1 file changed, 12 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
+index 90f48b71fd8f..d9eec1b60e66 100644
+--- a/drivers/video/fbdev/udlfb.c
++++ b/drivers/video/fbdev/udlfb.c
+@@ -1649,8 +1649,9 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+ const struct device_attribute *attr;
+ struct dlfb_data *dlfb;
+ struct fb_info *info;
+- int retval = -ENOMEM;
++ int retval;
+ struct usb_device *usbdev = interface_to_usbdev(intf);
++ struct usb_endpoint_descriptor *out;
+
+ /* usb initialization */
+ dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
+@@ -1664,6 +1665,12 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+ dlfb->udev = usb_get_dev(usbdev);
+ usb_set_intfdata(intf, dlfb);
+
++ retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL);
++ if (retval) {
++ dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n");
++ goto error;
++ }
++
+ dev_dbg(&intf->dev, "console enable=%d\n", console);
+ dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio);
+ dev_dbg(&intf->dev, "shadow enable=%d\n", shadow);
+@@ -1673,6 +1680,7 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+ if (!dlfb_parse_vendor_descriptor(dlfb, intf)) {
+ dev_err(&intf->dev,
+ "firmware not recognized, incompatible device?\n");
++ retval = -ENODEV;
+ goto error;
+ }
+
+@@ -1686,8 +1694,10 @@ static int dlfb_usb_probe(struct usb_interface *intf,
+
+ /* allocates framebuffer driver structure, not framebuffer memory */
+ info = framebuffer_alloc(0, &dlfb->udev->dev);
+- if (!info)
++ if (!info) {
++ retval = -ENOMEM;
+ goto error;
++ }
+
+ dlfb->info = info;
+ info->par = dlfb;
+--
+2.35.1
+
--- /dev/null
+From 3484ba0b6800665e27e2711cc119aaddd645101e Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Thu, 21 Apr 2022 15:48:05 +0200
+Subject: wireguard: device: check for metadata_dst with skb_valid_dst()
+
+From: Nikolay Aleksandrov <razor@blackwall.org>
+
+[ Upstream commit 45ac774c33d834fe9d4de06ab5f1022fe8cd2071 ]
+
+When we try to transmit an skb with md_dst attached through wireguard
+we hit a null pointer dereference in wg_xmit() due to the use of
+dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to
+dereference dst->dev.
+
+Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which
+checks for DST_METADATA flag, and if it's set, then falls back to
+wireguard's device mtu. That gives us the best chance of transmitting
+the packet; otherwise if the blackhole netdev is used we'd get
+ETH_MIN_MTU.
+
+ [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0
+ [ 263.693908] #PF: supervisor read access in kernel mode
+ [ 263.694174] #PF: error_code(0x0000) - not-present page
+ [ 263.694424] PGD 0 P4D 0
+ [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI
+ [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522
+ [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
+ [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20
+ [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00
+ [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246
+ [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000
+ [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900
+ [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002
+ [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00
+ [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000
+ [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000
+ [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
+ [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0
+ [ 263.699214] Call Trace:
+ [ 263.699505] <TASK>
+ [ 263.699759] wg_xmit+0x411/0x450
+ [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0
+ [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0
+ [ 263.700719] dev_hard_start_xmit+0xd9/0x220
+ [ 263.701047] __dev_queue_xmit+0x8b9/0xd30
+ [ 263.701344] __bpf_redirect+0x1a4/0x380
+ [ 263.701664] __dev_queue_xmit+0x83b/0xd30
+ [ 263.701961] ? packet_parse_headers+0xb4/0xf0
+ [ 263.702275] packet_sendmsg+0x9a8/0x16a0
+ [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40
+ [ 263.702933] sock_sendmsg+0x5e/0x60
+ [ 263.703239] __sys_sendto+0xf0/0x160
+ [ 263.703549] __x64_sys_sendto+0x20/0x30
+ [ 263.703853] do_syscall_64+0x3b/0x90
+ [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae
+ [ 263.704494] RIP: 0033:0x7f3704d50506
+ [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
+ [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
+ [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506
+ [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003
+ [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014
+ [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90
+ [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001
+ [ 263.708132] </TASK>
+ [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge]
+ [ 263.708942] CR2: 00000000000000e0
+
+Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
+Link: https://github.com/cilium/cilium/issues/19428
+Reported-by: Martynas Pumputis <m@lambda.lt>
+Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
+Acked-by: Daniel Borkmann <daniel@iogearbox.net>
+Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/wireguard/device.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireguard/device.c b/drivers/net/wireguard/device.c
+index a46067c38bf5..5eaef79c06e1 100644
+--- a/drivers/net/wireguard/device.c
++++ b/drivers/net/wireguard/device.c
+@@ -19,6 +19,7 @@
+ #include <linux/if_arp.h>
+ #include <linux/icmp.h>
+ #include <linux/suspend.h>
++#include <net/dst_metadata.h>
+ #include <net/icmp.h>
+ #include <net/rtnetlink.h>
+ #include <net/ip_tunnels.h>
+@@ -152,7 +153,7 @@ static netdev_tx_t wg_xmit(struct sk_buff *skb, struct net_device *dev)
+ goto err_peer;
+ }
+
+- mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
++ mtu = skb_valid_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
+
+ __skb_queue_head_init(&packets);
+ if (!skb_is_gso(skb)) {
+--
+2.35.1
+
--- /dev/null
+From 64e4b936791a3a750dc892e741a3c5c93d290a3f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Tue, 19 Apr 2022 09:56:23 -0400
+Subject: x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
+
+From: Mikulas Patocka <mpatocka@redhat.com>
+
+[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]
+
+The first "if" condition in __memcpy_flushcache is supposed to align the
+"dest" variable to 8 bytes and copy data up to this alignment. However,
+this condition may misbehave if "size" is greater than 4GiB.
+
+The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
+arguments to unsigned int and selects the smaller one. However, the
+cast truncates high bits in "size" and it results in misbehavior.
+
+For example:
+
+ suppose that size == 0x100000001, dest == 0x200000002
+ min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
+ ...
+ dest += 0x1;
+
+so we copy just one byte "and" dest remains unaligned.
+
+This patch fixes the bug by replacing unsigned with size_t.
+
+Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/x86/lib/usercopy_64.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
+index 0402a749f3a0..0ae6cf804197 100644
+--- a/arch/x86/lib/usercopy_64.c
++++ b/arch/x86/lib/usercopy_64.c
+@@ -119,7 +119,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
+
+ /* cache copy and flush to align dest */
+ if (!IS_ALIGNED(dest, 8)) {
+- unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
++ size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
+
+ memcpy((void *) dest, (void *) source, len);
+ clean_cache_range((void *) dest, len);
+--
+2.35.1
+
--- /dev/null
+From 2427cd8ab5e033723c6596d643c7ff71eae8e70b Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sashal@kernel.org>
+Date: Wed, 6 Apr 2022 17:58:04 +0200
+Subject: xsk: Fix l2fwd for copy mode + busy poll combo
+
+From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
+
+[ Upstream commit 8de8b71b787f38983d414d2dba169a3bfefa668a ]
+
+While checking AF_XDP copy mode combined with busy poll, strange
+results were observed. rxdrop and txonly scenarios worked fine, but
+l2fwd broke immediately.
+
+After a deeper look, it turned out that for l2fwd, Tx side was exiting
+early due to xsk_no_wakeup() returning true and in the end
+xsk_generic_xmit() was never called. Note that AF_XDP Tx in copy mode
+is syscall steered, so the current behavior is broken.
+
+Txonly scenario only worked due to the fact that
+sk_mark_napi_id_once_xdp() was never called - since Rx side is not in
+the picture for this case and mentioned function is called in
+xsk_rcv_check(), sk::sk_napi_id was never set, which in turn meant that
+xsk_no_wakeup() was returning false (see the sk->sk_napi_id >=
+MIN_NAPI_ID check in there).
+
+To fix this, prefer busy poll in xsk_sendmsg() only when zero copy is
+enabled on a given AF_XDP socket. By doing so, busy poll in copy mode
+would not exit early on Tx side and eventually xsk_generic_xmit() will
+be called.
+
+Fixes: a0731952d9cd ("xsk: Add busy-poll support for {recv,send}msg()")
+Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+Link: https://lore.kernel.org/bpf/20220406155804.434493-1-maciej.fijalkowski@intel.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/xdp/xsk.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
+index ac343cd8ff3f..39a82bfb5caa 100644
+--- a/net/xdp/xsk.c
++++ b/net/xdp/xsk.c
+@@ -640,7 +640,7 @@ static int __xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len
+ if (sk_can_busy_loop(sk))
+ sk_busy_loop(sk, 1); /* only support non-blocking sockets */
+
+- if (xsk_no_wakeup(sk))
++ if (xs->zc && xsk_no_wakeup(sk))
+ return 0;
+
+ pool = xs->pool;
+--
+2.35.1
+
projects / thirdparty / kernel / stable-queue.git / commitdiff
