}
#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- * For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit Meaning Kernel IRQ
- *------------------------------------------
- * 0
- * 1
- * 2
- * 3 mouse 12
- * 4
- * 5
- * 6 keyboard 1
- * 7 floppy 6
- * 8 COM2 3
- * 9 parallel port 7
- *10 EISA irq 3 -
- *11 EISA irq 4 -
- *12 EISA irq 5 5
- *13 EISA irq 6 -
- *14 EISA irq 7 -
- *15 COM1 4
- *16 EISA irq 9 9
- *17 EISA irq 10 10
- *18 EISA irq 11 11
- *19 EISA irq 12 -
- *20
- *21 EISA irq 14 14
- *22 EISA irq 15 15
- *23 IIC -
- *24 VGA (builtin) -
- *25
- *26
- *27
- *28 NCR810 (builtin) 28
- *29
- *30
- *31
- *32 PCI 0 slot 4 A primary bus 32
- *33 PCI 0 slot 4 B primary bus 33
- *34 PCI 0 slot 4 C primary bus 34
- *35 PCI 0 slot 4 D primary bus
- *36 PCI 0 slot 5 A primary bus
- *37 PCI 0 slot 5 B primary bus
- *38 PCI 0 slot 5 C primary bus
- *39 PCI 0 slot 5 D primary bus
- *40 PCI 0 slot 6 A primary bus
- *41 PCI 0 slot 6 B primary bus
- *42 PCI 0 slot 6 C primary bus
- *43 PCI 0 slot 6 D primary bus
- *44 PCI 0 slot 7 A primary bus
- *45 PCI 0 slot 7 B primary bus
- *46 PCI 0 slot 7 C primary bus
- *47 PCI 0 slot 7 D primary bus
- *48 PCI 0 slot 0 A secondary bus
- *49 PCI 0 slot 0 B secondary bus
- *50 PCI 0 slot 0 C secondary bus
- *51 PCI 0 slot 0 D secondary bus
- *52 PCI 0 slot 1 A secondary bus
- *53 PCI 0 slot 1 B secondary bus
- *54 PCI 0 slot 1 C secondary bus
- *55 PCI 0 slot 1 D secondary bus
- *56 PCI 0 slot 2 A secondary bus
- *57 PCI 0 slot 2 B secondary bus
- *58 PCI 0 slot 2 C secondary bus
- *59 PCI 0 slot 2 D secondary bus
- *60 PCI 0 slot 3 A secondary bus
- *61 PCI 0 slot 3 B secondary bus
- *62 PCI 0 slot 3 C secondary bus
- *63 PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
- /*
- * Write the AIR register on the T3/T4 with the
- * address of the IC mask register (offset 0x40)
- */
- *(vulp)T2_AIR = 0x40;
- mb();
- *(vulp)T2_AIR; /* re-read to force write */
- mb();
- *(vulp)T2_DIR = mask;
- mb();
- mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
- *(vulp)T2_VAR = (u_long) bit;
- mb();
- mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
- { /* irq_to_mask */
- -1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */
- -1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* pseudo */
- -1, -1, -1, -1, 28, -1, -1, -1, /* pseudo */
- 32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
- 40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
- 48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
- 56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
- },
- { /* mask_to_irq */
- -1, -1, -1, 12, -1, -1, 1, 6, /* mask 0-7 */
- 3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */
- 9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */
- -1, -1, -1, -1, 28, -1, -1, -1, /* mask 24-31 */
- 32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
- 40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
- 48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
- 56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
- },
- -1,
- lynx_update_irq_hw,
- lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
- sable_lynx_irq_swizzle = &lynx_irq_swizzle;
- sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot Device
- * 0 none
- * 1 none
- * 2 PCI-EISA bridge
- * 3 PCI-PCI bridge
- * 4 NCR 810 (Demi-Lynx only)
- * 5 none
- * 6 PCI on board slot 4
- * 7 PCI on board slot 5
- * 8 PCI on board slot 6
- * 9 PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11 PCI on board slot 0
- * 12 PCI on board slot 1
- * 13 PCI on board slot 2
- * 14 PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[19][5] = {
- /*INT INTA INTB INTC INTD */
- { -1, -1, -1, -1, -1}, /* IdSel 13, PCEB */
- { -1, -1, -1, -1, -1}, /* IdSel 14, PPB */
- { 28, 28, 28, 28, 28}, /* IdSel 15, NCR demi */
- { -1, -1, -1, -1, -1}, /* IdSel 16, none */
- { 32, 32, 33, 34, 35}, /* IdSel 17, slot 4 */
- { 36, 36, 37, 38, 39}, /* IdSel 18, slot 5 */
- { 40, 40, 41, 42, 43}, /* IdSel 19, slot 6 */
- { 44, 44, 45, 46, 47}, /* IdSel 20, slot 7 */
- { -1, -1, -1, -1, -1}, /* IdSel 22, none */
- /* The following are actually behind the PPB. */
- { -1, -1, -1, -1, -1}, /* IdSel 16 none */
- { 28, 28, 28, 28, 28}, /* IdSel 17 NCR lynx */
- { -1, -1, -1, -1, -1}, /* IdSel 18 none */
- { -1, -1, -1, -1, -1}, /* IdSel 19 none */
- { -1, -1, -1, -1, -1}, /* IdSel 20 none */
- { -1, -1, -1, -1, -1}, /* IdSel 21 none */
- { 48, 48, 49, 50, 51}, /* IdSel 22 slot 0 */
- { 52, 52, 53, 54, 55}, /* IdSel 23 slot 1 */
- { 56, 56, 57, 58, 59}, /* IdSel 24 slot 2 */
- { 60, 60, 61, 62, 63} /* IdSel 25 slot 3 */
- };
- const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
-}
-
-static u8
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- int slot, pin = *pinp;
-
- if (dev->bus->number == 0) {
- slot = PCI_SLOT(dev->devfn);
- }
- /* Check for the built-in bridge */
- else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
- slot = PCI_SLOT(dev->devfn) + 11;
- }
- else
- {
- /* Must be a card-based bridge. */
- do {
- if (PCI_SLOT(dev->bus->self->devfn) == 3) {
- slot = PCI_SLOT(dev->devfn) + 11;
- break;
- }
- pin = pci_swizzle_interrupt_pin(dev, pin);
-
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- /* Slot of the next bridge. */
- slot = PCI_SLOT(dev->devfn);
- } while (dev->bus->self);
- }
- *pinp = pin;
- return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
/***********************************************************************/
/* GENERIC irq routines */
* these games with GAMMA_BIAS.
*/
-#if defined(CONFIG_ALPHA_GENERIC) || \
- (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
- .vector_name = "Sable",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_T2_IO,
- .machine_check = t2_machine_check,
- .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = T2_DEFAULT_MEM_BASE,
-
- .nr_irqs = 40,
- .device_interrupt = sable_lynx_srm_device_interrupt,
-
- .init_arch = t2_init_arch,
- .init_irq = sable_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = sable_lynx_init_pci,
- .kill_arch = t2_kill_arch,
- .pci_map_irq = sable_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .t2 = {
- .gamma_bias = 0
- } }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
- (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
#undef GAMMA_BIAS
#define GAMMA_BIAS _GAMMA_BIAS
struct alpha_machine_vector sable_gamma_mv __initmv = {
} }
};
ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
- .vector_name = "Lynx",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_T2_IO,
- .machine_check = t2_machine_check,
- .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = T2_DEFAULT_MEM_BASE,
-
- .nr_irqs = 64,
- .device_interrupt = sable_lynx_srm_device_interrupt,
-
- .init_arch = t2_init_arch,
- .init_irq = lynx_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = sable_lynx_init_pci,
- .kill_arch = t2_kill_arch,
- .pci_map_irq = lynx_map_irq,
- .pci_swizzle = lynx_swizzle,
-
- .sys = { .t2 = {
- .gamma_bias = _GAMMA_BIAS
- } }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
+#endif /* GENERIC || SABLE */
projects / thirdparty / kernel / linux.git / commitdiff
