u-boot: set nanopi r2s baudrate to 115200

default is 150000 but many usb-ttl adapters are unstable at this rate.

diff --git a/lfs/u-boot b/lfs/u-boot
index b245d529198798f6a980f73fb84d641e706307ca..5f1ce5b15bf4fae0781ca03e2f42b983bc1622f1 100644 (file)
--- a/lfs/u-boot
+++ b/lfs/u-boot
@@ -188,12 +188,13 @@ else
        cd $(DIR_APP)/arm-trusted-firmware-2.5 && make PLAT=rk3328 ARCH=aarch64 DEBUG=0 bl31
        cd $(DIR_APP) && cp arm-trusted-firmware-2.5/build/rk3328/release/bl31/bl31.elf bl31.elf
        cd $(DIR_APP) && rm -rf arm-trusted-firmware-2.5
-       -mkdir -pv /usr/share/u-boot/nanoi_r2s
+       -mkdir -pv /usr/share/u-boot/nanopi_r2s
        cd $(DIR_APP) && make CROSS_COMPILE="" nanopi-r2s-rk3328_config
        cd $(DIR_APP) && sed -i -e 's!^CONFIG_IDENT_STRING=.*!CONFIG_IDENT_STRING=" Nanopi R2S - IPFire.org"!' .config
+       cd $(DIR_APP) && sed -i -e 's!^CONFIG_BAUDRATE=.*!CONFIG_BAUDRATE=115200"!' .config
        cd $(DIR_APP) && make CROSS_COMPILE="" HOSTCC="gcc $(CFLAGS)"
        cd $(DIR_APP) && install -v -m 644 u-boot-rockchip.bin \
-               /usr/share/u-boot/nanoi_r2s/u-boot-rockchip.bin
+               /usr/share/u-boot/nanopi_r2s/u-boot-rockchip.bin
        cd $(DIR_APP) && make distclean
 
 endif