]> git.ipfire.org Git - thirdparty/linux.git/commitdiff
ASoC: codecs: Add NeoFidelity NTP8835 codec
authorIgor Prusov <ivprusov@salutedevices.com>
Wed, 25 Sep 2024 14:52:44 +0000 (17:52 +0300)
committerMark Brown <broonie@kernel.org>
Sun, 29 Sep 2024 23:09:20 +0000 (01:09 +0200)
The NeoFidelity NTP8835 adn NTP8835C are 2.1 channel amplifiers with
mixer and biquad filters. Both amplifiers have identical programming
interfaces but differ in output signal characteristics.

Datasheet: https://www.cpbay.com/Uploads/20210225/6037116a3ea91.pdf
Datasheet: https://www.cpbay.com/Uploads/20210918/61458b2f2631e.pdf
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Link: https://patch.msgid.link/20240925-ntp-amps-8918-8835-v3-6-e2459a8191a6@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/Kconfig
sound/soc/codecs/Makefile
sound/soc/codecs/ntp8835.c [new file with mode: 0644]

index 03eb9512d2239782faf1ed3a3315e94c9e583c53..c6c4c7481b4ca4938bdcabb1e22514ddd2bc5ca4 100644 (file)
@@ -2573,6 +2573,11 @@ config SND_SOC_NTP8918
        tristate "NeoFidelity NTP8918 amplifier"
        depends on I2C
 
+config SND_SOC_NTP8835
+       select SND_SOC_NTPFW
+       tristate "NeoFidelity NTP8835 and NTP8835C amplifiers"
+       depends on I2C
+
 config SND_SOC_TPA6130A2
        tristate "Texas Instruments TPA6130A2 headphone amplifier"
        depends on I2C
index 9e72c28d193b21a0b0ac4fb3dfbaea5e4252a66c..850c6249e3dfedb3d59897b57c6a731b6fbf517e 100644 (file)
@@ -189,6 +189,7 @@ snd-soc-nau8821-y := nau8821.o
 snd-soc-nau8822-y := nau8822.o
 snd-soc-nau8824-y := nau8824.o
 snd-soc-nau8825-y := nau8825.o
+snd-soc-ntp8835-y := ntp8835.o
 snd-soc-ntp8918-y := ntp8918.o
 snd-soc-ntpfw-y := ntpfw.o
 snd-soc-hdmi-codec-y := hdmi-codec.o
@@ -593,6 +594,7 @@ obj-$(CONFIG_SND_SOC_NAU8821)   += snd-soc-nau8821.o
 obj-$(CONFIG_SND_SOC_NAU8822)   += snd-soc-nau8822.o
 obj-$(CONFIG_SND_SOC_NAU8824)   += snd-soc-nau8824.o
 obj-$(CONFIG_SND_SOC_NAU8825)   += snd-soc-nau8825.o
+obj-$(CONFIG_SND_SOC_NTP8835)  += snd-soc-ntp8835.o
 obj-$(CONFIG_SND_SOC_NTP8918)  += snd-soc-ntp8918.o
 obj-$(CONFIG_SND_SOC_NTPFW)    += snd-soc-ntpfw.o
 obj-$(CONFIG_SND_SOC_HDMI_CODEC)       += snd-soc-hdmi-codec.o
diff --git a/sound/soc/codecs/ntp8835.c b/sound/soc/codecs/ntp8835.c
new file mode 100644 (file)
index 0000000..97056d8
--- /dev/null
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the NTP8835/NTP8835C Audio Amplifiers
+ *
+ * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
+ *
+ * Author: Igor Prusov <ivprusov@salutedevices.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/bits.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <sound/initval.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-component.h>
+#include <sound/tlv.h>
+
+#include "ntpfw.h"
+
+#define NTP8835_FORMATS     (SNDRV_PCM_FMTBIT_S16_LE | \
+                            SNDRV_PCM_FMTBIT_S20_3LE | \
+                            SNDRV_PCM_FMTBIT_S24_LE | \
+                            SNDRV_PCM_FMTBIT_S32_LE)
+
+#define NTP8835_INPUT_FMT                      0x0
+#define  NTP8835_INPUT_FMT_MASTER_MODE         BIT(0)
+#define  NTP8835_INPUT_FMT_GSA_MODE            BIT(1)
+#define NTP8835_GSA_FMT                                0x1
+#define  NTP8835_GSA_BS_MASK                   GENMASK(3, 2)
+#define  NTP8835_GSA_BS(x)                     ((x) << 2)
+#define  NTP8835_GSA_RIGHT_J                   BIT(0)
+#define  NTP8835_GSA_LSB                       BIT(1)
+#define NTP8835_MCLK_FREQ_CTRL                 0x2
+#define  NTP8835_MCLK_FREQ_MCF                 GENMASK(1, 0)
+#define NTP8835_SOFT_MUTE                      0x26
+#define  NTP8835_SOFT_MUTE_SM1                 BIT(0)
+#define  NTP8835_SOFT_MUTE_SM2                 BIT(1)
+#define  NTP8835_SOFT_MUTE_SM3                 BIT(2)
+#define NTP8835_PWM_SWITCH                     0x27
+#define  NTP8835_PWM_SWITCH_POF1               BIT(0)
+#define  NTP8835_PWM_SWITCH_POF2               BIT(1)
+#define  NTP8835_PWM_SWITCH_POF3               BIT(2)
+#define NTP8835_PWM_MASK_CTRL0                 0x28
+#define  NTP8835_PWM_MASK_CTRL0_OUT_LOW                BIT(1)
+#define  NTP8835_PWM_MASK_CTRL0_FPMLD          BIT(2)
+#define NTP8835_MASTER_VOL                     0x2e
+#define NTP8835_CHNL_A_VOL                     0x2f
+#define NTP8835_CHNL_B_VOL                     0x30
+#define NTP8835_CHNL_C_VOL                     0x31
+#define REG_MAX                                        NTP8835_CHNL_C_VOL
+
+#define NTP8835_FW_NAME                                "eq_8835.bin"
+#define NTP8835_FW_MAGIC                       0x38383335      /* "8835" */
+
+struct ntp8835_priv {
+       struct i2c_client *i2c;
+       struct reset_control *reset;
+       unsigned int format;
+       struct clk *mclk;
+       unsigned int mclk_rate;
+};
+
+static const DECLARE_TLV_DB_RANGE(ntp8835_vol_scale,
+       0, 1, TLV_DB_SCALE_ITEM(-15000, 0, 0),
+       2, 6, TLV_DB_SCALE_ITEM(-15000, 1000, 0),
+       7, 0xff, TLV_DB_SCALE_ITEM(-10000, 50, 0),
+);
+
+static int ntp8835_mute_info(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_info *uinfo)
+{
+       uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+       uinfo->access =
+               (SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE);
+       uinfo->count = 1;
+
+       uinfo->value.integer.min = 0;
+       uinfo->value.integer.max = 1;
+       uinfo->value.integer.step = 1;
+
+       return 0;
+}
+
+static int ntp8835_mute_get(struct snd_kcontrol *kcontrol,
+                           struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+       unsigned int val;
+
+       val = snd_soc_component_read(component, NTP8835_SOFT_MUTE);
+
+       ucontrol->value.integer.value[0] = val ? 0 : 1;
+       return 0;
+}
+
+static int ntp8835_mute_put(struct snd_kcontrol *kcontrol,
+                           struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+       unsigned int val;
+
+       val = ucontrol->value.integer.value[0] ? 0 : 7;
+
+       snd_soc_component_write(component, NTP8835_SOFT_MUTE, val);
+
+       return 0;
+}
+
+static const struct snd_kcontrol_new ntp8835_vol_control[] = {
+       SOC_SINGLE_TLV("Playback Volume", NTP8835_MASTER_VOL, 0,
+                      0xff, 0, ntp8835_vol_scale),
+       {
+               .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+               .name = "Playback Switch",
+               .info = ntp8835_mute_info,
+               .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,
+               .get = ntp8835_mute_get,
+               .put = ntp8835_mute_put,
+       },
+};
+
+static void ntp8835_reset_gpio(struct ntp8835_priv *ntp8835)
+{
+       /*
+        * Proper initialization sequence for NTP835 amplifier requires driving
+        * /RESET signal low during power up for at least 0.1us. The sequence is,
+        * according to NTP8835 datasheet, 6.2 Timing Sequence (recommended):
+        * Deassert for T2 >= 1ms...
+        */
+       reset_control_deassert(ntp8835->reset);
+       fsleep(1000);
+
+       /* ...Assert for T3 >= 0.1us... */
+       reset_control_assert(ntp8835->reset);
+       fsleep(1);
+
+       /* ...Deassert, and wait for T4 >= 0.5ms before sound on sequence. */
+       reset_control_deassert(ntp8835->reset);
+       fsleep(500);
+}
+
+static const struct reg_sequence ntp8835_sound_on[] = {
+       { NTP8835_PWM_MASK_CTRL0,       NTP8835_PWM_MASK_CTRL0_FPMLD },
+       { NTP8835_PWM_SWITCH,           0x00 },
+       { NTP8835_SOFT_MUTE,            0x00 },
+};
+
+static const struct reg_sequence ntp8835_sound_off[] = {
+       { NTP8835_SOFT_MUTE,            NTP8835_SOFT_MUTE_SM1 |
+                                       NTP8835_SOFT_MUTE_SM2 |
+                                       NTP8835_SOFT_MUTE_SM3 },
+
+       { NTP8835_PWM_SWITCH,           NTP8835_PWM_SWITCH_POF1 |
+                                       NTP8835_PWM_SWITCH_POF2 |
+                                       NTP8835_PWM_SWITCH_POF3 },
+
+       { NTP8835_PWM_MASK_CTRL0,       NTP8835_PWM_MASK_CTRL0_OUT_LOW |
+                                       NTP8835_PWM_MASK_CTRL0_FPMLD },
+};
+
+static int ntp8835_load_firmware(struct ntp8835_priv *ntp8835)
+{
+       int ret;
+
+       ret = ntpfw_load(ntp8835->i2c, NTP8835_FW_NAME, NTP8835_FW_MAGIC);
+       if (ret == -ENOENT) {
+               dev_warn_once(&ntp8835->i2c->dev,
+                             "Could not find firmware %s\n", NTP8835_FW_NAME);
+               return 0;
+       }
+
+       return ret;
+}
+
+static int ntp8835_snd_suspend(struct snd_soc_component *component)
+{
+       struct ntp8835_priv *ntp8835 = snd_soc_component_get_drvdata(component);
+
+       regcache_cache_only(component->regmap, true);
+
+       regmap_multi_reg_write_bypassed(component->regmap,
+                                       ntp8835_sound_off,
+                                       ARRAY_SIZE(ntp8835_sound_off));
+
+       /*
+        * According to NTP8835 datasheet, 6.2 Timing Sequence (recommended):
+        * wait after sound off for T6 >= 0.5ms
+        */
+       fsleep(500);
+       reset_control_assert(ntp8835->reset);
+
+       regcache_mark_dirty(component->regmap);
+       clk_disable_unprepare(ntp8835->mclk);
+
+       return 0;
+}
+
+static int ntp8835_snd_resume(struct snd_soc_component *component)
+{
+       struct ntp8835_priv *ntp8835 = snd_soc_component_get_drvdata(component);
+       int ret;
+
+       ntp8835_reset_gpio(ntp8835);
+       ret = clk_prepare_enable(ntp8835->mclk);
+       if (ret)
+               return ret;
+
+       regmap_multi_reg_write_bypassed(component->regmap,
+                                       ntp8835_sound_on,
+                                       ARRAY_SIZE(ntp8835_sound_on));
+
+       ret = ntp8835_load_firmware(ntp8835);
+       if (ret) {
+               dev_err(&ntp8835->i2c->dev, "Failed to load firmware\n");
+               return ret;
+       }
+
+       regcache_cache_only(component->regmap, false);
+       snd_soc_component_cache_sync(component);
+
+       return 0;
+}
+
+static int ntp8835_probe(struct snd_soc_component *component)
+{
+       int ret;
+       struct ntp8835_priv *ntp8835 = snd_soc_component_get_drvdata(component);
+       struct device *dev = component->dev;
+
+       ret = snd_soc_add_component_controls(component, ntp8835_vol_control,
+                                            ARRAY_SIZE(ntp8835_vol_control));
+       if (ret)
+               return dev_err_probe(dev, ret, "Failed to add controls\n");
+
+       ret = ntp8835_load_firmware(ntp8835);
+       if (ret)
+               return dev_err_probe(dev, ret, "Failed to load firmware\n");
+
+       return 0;
+}
+
+static const struct snd_soc_dapm_widget ntp8835_dapm_widgets[] = {
+       SND_SOC_DAPM_DAC("AIFIN", "Playback", SND_SOC_NOPM, 0, 0),
+
+       SND_SOC_DAPM_OUTPUT("OUT1"),
+       SND_SOC_DAPM_OUTPUT("OUT2"),
+       SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route ntp8835_dapm_routes[] = {
+       { "OUT1", NULL, "AIFIN" },
+       { "OUT2", NULL, "AIFIN" },
+       { "OUT3", NULL, "AIFIN" },
+};
+
+static int ntp8835_set_component_sysclk(struct snd_soc_component *component,
+                                      int clk_id, int source,
+                                      unsigned int freq, int dir)
+{
+       struct ntp8835_priv *ntp8835 = snd_soc_component_get_drvdata(component);
+
+       switch (freq) {
+       case 12288000:
+       case 24576000:
+       case 18432000:
+               ntp8835->mclk_rate = freq;
+               break;
+       default:
+               ntp8835->mclk_rate = 0;
+               dev_err(component->dev, "Unsupported MCLK value: %u", freq);
+               return -EINVAL;
+       };
+
+       return 0;
+}
+
+static const struct snd_soc_component_driver soc_component_ntp8835 = {
+       .probe = ntp8835_probe,
+       .suspend = ntp8835_snd_suspend,
+       .resume = ntp8835_snd_resume,
+       .dapm_widgets = ntp8835_dapm_widgets,
+       .num_dapm_widgets = ARRAY_SIZE(ntp8835_dapm_widgets),
+       .dapm_routes = ntp8835_dapm_routes,
+       .num_dapm_routes = ARRAY_SIZE(ntp8835_dapm_routes),
+       .set_sysclk = ntp8835_set_component_sysclk,
+};
+
+static int ntp8835_hw_params(struct snd_pcm_substream *substream,
+                            struct snd_pcm_hw_params *params,
+                            struct snd_soc_dai *dai)
+{
+       struct snd_soc_component *component = dai->component;
+       struct ntp8835_priv *ntp8835 = snd_soc_component_get_drvdata(component);
+       unsigned int input_fmt = 0;
+       unsigned int gsa_fmt = 0;
+       unsigned int gsa_fmt_mask;
+       unsigned int mcf;
+       int ret;
+
+       switch (ntp8835->mclk_rate) {
+       case 12288000:
+               mcf = 0;
+               break;
+       case 24576000:
+               mcf = 1;
+               break;
+       case 18432000:
+               mcf = 2;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       ret = snd_soc_component_update_bits(component, NTP8835_MCLK_FREQ_CTRL,
+                                           NTP8835_MCLK_FREQ_MCF, mcf);
+       if (ret)
+               return ret;
+
+       switch (ntp8835->format) {
+       case SND_SOC_DAIFMT_I2S:
+               break;
+       case SND_SOC_DAIFMT_RIGHT_J:
+               input_fmt |= NTP8835_INPUT_FMT_GSA_MODE;
+               gsa_fmt |= NTP8835_GSA_RIGHT_J;
+               break;
+       case SND_SOC_DAIFMT_LEFT_J:
+               input_fmt |= NTP8835_INPUT_FMT_GSA_MODE;
+               break;
+       }
+
+       ret = snd_soc_component_update_bits(component, NTP8835_INPUT_FMT,
+                                           NTP8835_INPUT_FMT_MASTER_MODE |
+                                           NTP8835_INPUT_FMT_GSA_MODE,
+                                           input_fmt);
+
+       if (!(input_fmt & NTP8835_INPUT_FMT_GSA_MODE) || ret < 0)
+               return ret;
+
+       switch (params_width(params)) {
+       case 24:
+               gsa_fmt |= NTP8835_GSA_BS(0);
+               break;
+       case 20:
+               gsa_fmt |= NTP8835_GSA_BS(1);
+               break;
+       case 18:
+               gsa_fmt |= NTP8835_GSA_BS(2);
+               break;
+       case 16:
+               gsa_fmt |= NTP8835_GSA_BS(3);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       gsa_fmt_mask = NTP8835_GSA_BS_MASK |
+                      NTP8835_GSA_RIGHT_J |
+                      NTP8835_GSA_LSB;
+       return snd_soc_component_update_bits(component, NTP8835_GSA_FMT,
+                                            gsa_fmt_mask, gsa_fmt);
+}
+
+static int ntp8835_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+       struct snd_soc_component *component = dai->component;
+       struct ntp8835_priv *ntp8835 = snd_soc_component_get_drvdata(component);
+
+       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+       case SND_SOC_DAIFMT_I2S:
+       case SND_SOC_DAIFMT_RIGHT_J:
+       case SND_SOC_DAIFMT_LEFT_J:
+               ntp8835->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+               break;
+       default:
+               return -EINVAL;
+       }
+       return 0;
+};
+
+static const struct snd_soc_dai_ops ntp8835_dai_ops = {
+       .hw_params = ntp8835_hw_params,
+       .set_fmt = ntp8835_set_fmt,
+};
+
+static struct snd_soc_dai_driver ntp8835_dai = {
+       .name = "ntp8835-amplifier",
+       .playback = {
+               .stream_name = "Playback",
+               .channels_min = 1,
+               .channels_max = 3,
+               .rates = SNDRV_PCM_RATE_8000_192000,
+               .formats = NTP8835_FORMATS,
+       },
+       .ops = &ntp8835_dai_ops,
+};
+
+static const struct regmap_config ntp8835_regmap = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = REG_MAX,
+       .cache_type = REGCACHE_MAPLE,
+};
+
+static int ntp8835_i2c_probe(struct i2c_client *i2c)
+{
+       struct ntp8835_priv *ntp8835;
+       struct regmap *regmap;
+       int ret;
+
+       ntp8835 = devm_kzalloc(&i2c->dev, sizeof(*ntp8835), GFP_KERNEL);
+       if (!ntp8835)
+               return -ENOMEM;
+
+       ntp8835->i2c = i2c;
+
+       ntp8835->reset = devm_reset_control_get_shared(&i2c->dev, NULL);
+       if (IS_ERR(ntp8835->reset))
+               return dev_err_probe(&i2c->dev, PTR_ERR(ntp8835->reset),
+                                    "Failed to get reset\n");
+
+       ret = reset_control_deassert(ntp8835->reset);
+       if (ret)
+               return dev_err_probe(&i2c->dev, PTR_ERR(ntp8835->reset),
+                                    "Failed to deassert reset\n");
+
+       dev_set_drvdata(&i2c->dev, ntp8835);
+
+       ntp8835_reset_gpio(ntp8835);
+
+       regmap = devm_regmap_init_i2c(i2c, &ntp8835_regmap);
+       if (IS_ERR(regmap))
+               return dev_err_probe(&i2c->dev, PTR_ERR(regmap),
+                                    "Failed to allocate regmap\n");
+
+       ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_ntp8835,
+                                             &ntp8835_dai, 1);
+       if (ret)
+               return dev_err_probe(&i2c->dev, ret,
+                                    "Failed to register component\n");
+
+       ntp8835->mclk = devm_clk_get_enabled(&i2c->dev, "mclk");
+       if (IS_ERR(ntp8835->mclk))
+               return dev_err_probe(&i2c->dev, PTR_ERR(ntp8835->mclk), "failed to get mclk\n");
+
+       return 0;
+}
+
+static const struct i2c_device_id ntp8835_i2c_id[] = {
+       { "ntp8835", 0 },
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, ntp8835_i2c_id);
+
+static const struct of_device_id ntp8835_of_match[] = {
+       {.compatible = "neofidelity,ntp8835",},
+       {}
+};
+MODULE_DEVICE_TABLE(of, ntp8835_of_match);
+
+static struct i2c_driver ntp8835_i2c_driver = {
+       .probe = ntp8835_i2c_probe,
+       .id_table = ntp8835_i2c_id,
+       .driver = {
+               .name = "ntp8835",
+               .of_match_table = ntp8835_of_match,
+       },
+};
+module_i2c_driver(ntp8835_i2c_driver);
+
+MODULE_AUTHOR("Igor Prusov <ivprusov@salutedevices.com>");
+MODULE_DESCRIPTION("NTP8835 Audio Amplifier Driver");
+MODULE_LICENSE("GPL");