Remove unused (generated) src/ylwrap file.

ylwrap is now placed in config through AC_CONFIG_AUX_DIR.
The checked in src copy of the file wasn't used.

diff --git a/src/ylwrap b/src/ylwrap
deleted file mode 100644 (file)
index b77a9eb..0000000
--- a/src/ylwrap
+++ /dev/null
@@ -1,154 +0,0 @@
-#! /bin/sh
-# ylwrap - wrapper for lex/yacc invocations.
-# Copyright 1996, 1997, 1998, 1999, 2001  Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Usage:
-#     ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
-# * INPUT is the input file
-# * OUTPUT is file PROG generates
-# * DESIRED is file we actually want
-# * PROGRAM is program to run
-# * ARGS are passed to PROG
-# Any number of OUTPUT,DESIRED pairs may be used.
-
-# The input.
-input="$1"
-shift
-case "$input" in
- [\\/]* | ?:[\\/]*)
-    # Absolute path; do nothing.
-    ;;
- *)
-    # Relative path.  Make it absolute.
-    input="`pwd`/$input"
-    ;;
-esac
-
-pairlist=
-while test "$#" -ne 0; do
-   if test "$1" = "--"; then
-      shift
-      break
-   fi
-   pairlist="$pairlist $1"
-   shift
-done
-
-# The program to run.
-prog="$1"
-shift
-# Make any relative path in $prog absolute.
-case "$prog" in
- [\\/]* | ?:[\\/]*) ;;
- *[\\/]*) prog="`pwd`/$prog" ;;
-esac
-
-# FIXME: add hostname here for parallel makes that run commands on
-# other machines.  But that might take us over the 14-char limit.
-dirname=ylwrap$$
-trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
-mkdir $dirname || exit 1
-
-cd $dirname
-
-$prog ${1+"$@"} "$input"
-status=$?
-
-if test $status -eq 0; then
-   set X $pairlist
-   shift
-   first=yes
-   # Since DOS filename conventions don't allow two dots,
-   # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-   # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-   y_tab_nodot="no"
-   if test -f y_tab.c || test -f y_tab.h; then
-      y_tab_nodot="yes"
-   fi
-
-   # The directory holding the input.
-   input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
-   # Quote $INPUT_DIR so we can use it in a regexp.
-   # FIXME: really we should care about more than `.' and `\'.
-   input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-
-   while test "$#" -ne 0; do
-      from="$1"
-      # Handle y_tab.c and y_tab.h output by DOS
-      if test $y_tab_nodot = "yes"; then
-        if test $from = "y.tab.c"; then
-           from="y_tab.c"
-        else
-           if test $from = "y.tab.h"; then
-              from="y_tab.h"
-           fi
-        fi
-      fi
-      if test -f "$from"; then
-         # If $2 is an absolute path name, then just use that,
-         # otherwise prepend `../'.
-         case "$2" in
-          [\\/]* | ?:[\\/]*) target="$2";;
-          *) target="../$2";;
-        esac
-
-        # Edit out `#line' or `#' directives.
-        #
-        # We don't want the resulting debug information to point at
-        # an absolute srcdir; it is better for it to just mention the
-        # .y file with no path.
-        #
-        # We want to use the real output file name, not yy.lex.c for
-        # instance.
-        #
-        # We want the include guards to be adjusted too.
-        FROM=`echo "$from" | sed \
-                 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-                 -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-        TARGET=`echo "$2" | sed \
-                 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-                 -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-         sed "/^#/{s,$input_rx,,;s,$from,$2,;s,$FORM,$TO,;}" "$from" >"$target" ||
-            status=$?
-      else
-        # A missing file is only an error for the first file.  This
-        # is a blatant hack to let us support using "yacc -d".  If -d
-        # is not specified, we don't want an error when the header
-        # file is "missing".
-        if test $first = yes; then
-           status=1
-        fi
-      fi
-      shift
-      shift
-      first=no
-   done
-else
-   status=$?
-fi
-
-# Remove the directory.
-cd ..
-rm -rf $dirname
-
-exit $status