+++ /dev/null
-Initializing cgroup subsys cpuset
-Initializing cgroup subsys cpu
-Linux version 2.6.31-14.fc12.x86_64 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.4.1 20090911 (Red Hat 4.4.1-13) (GCC) ) #1 SMP Tue Sep 15 03:48:57 EDT 2009
-Command line: ro root=UUID=1e10ddb5-8b5b-4c20-989c-e1b496853d47 rhgb 4 quiet LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_plytheme=spinfinity
-KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- Centaur CentaurHauls
-BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bfe91400 (usable)
- BIOS-e820: 00000000bfe91400 - 00000000c0000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
- BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
- BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
-DMI 2.4 present.
-last_pfn = 0xbfe91 max_arch_pfn = 0x400000000
-MTRR default type: uncachable
-MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-CFFFF write-protect
- D0000-EFFFF uncachable
- F0000-FFFFF write-protect
-MTRR variable ranges enabled:
- 0 base 000000000 mask F80000000 write-back
- 1 base 080000000 mask FC0000000 write-back
- 2 base 0BFF00000 mask FFFF00000 uncachable
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
-x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
-original variable MTRRs
-reg 0, base: 0GB, range: 2GB, type WB
-reg 1, base: 2GB, range: 1GB, type WB
-reg 2, base: 3071MB, range: 1MB, type UC
-total RAM coverred: 3071M
-Found optimal setting for mtrr clean up
- gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
-New variable MTRRs
-reg 0, base: 0GB, range: 2GB, type WB
-reg 1, base: 2GB, range: 1GB, type WB
-reg 2, base: 3071MB, range: 1MB, type UC
-x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
-initial memory mapped : 0 - 20000000
-init_memory_mapping: 0000000000000000-00000000bfe91000
- 0000000000 - 00bfe00000 page 2M
- 00bfe00000 - 00bfe91000 page 4k
-kernel direct mapping tables up to bfe91000 @ 8000-d000
-RAMDISK: 373a4000 - 37fef770
-ACPI: RSDP 00000000000fc370 00014 (v00 DELL )
-ACPI: RSDT 00000000bfe91a11 00038 (v01 DELL M07 27D60317 ASL 00000061)
-ACPI: FACP 00000000bfe92800 00074 (v01 DELL M07 27D60317 ASL 00000061)
-ACPI: DSDT 00000000bfe93400 04474 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
-ACPI: FACS 00000000bfea1c00 00040
-ACPI: APIC 00000000bfe93000 00068 (v01 DELL M07 27D60317 ASL 00000047)
-ACPI: ASF! 00000000bfe92c00 0005B (v16 DELL M07 27D60317 ASL 00000061)
-ACPI: MCFG 00000000bfe92fc0 0003E (v16 DELL M07 27D60317 ASL 00000061)
-ACPI: SSDT 00000000bfe91a8c 004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
-ACPI: Local APIC address 0xfee00000
-No NUMA configuration found
-Faking a node at 0000000000000000-00000000bfe91000
-Bootmem setup node 0 0000000000000000-00000000bfe91000
- NODE_DATA [000000000000b000 - 0000000000022fff]
- bootmap [0000000000023000 - 000000000003afd7] pages 18
-(7 early reservations) ==> bootmem [0000000000 - 00bfe91000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- #2 [0001000000 - 0002662390] TEXT DATA BSS ==> [0001000000 - 0002662390]
- #3 [00373a4000 - 0037fef770] RAMDISK ==> [00373a4000 - 0037fef770]
- #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- #5 [0002663000 - 00026631ec] BRK ==> [0002663000 - 00026631ec]
- #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
- [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880002c00000-ffff8800079fffff] on node 0
-Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00100000
-Movable zone start PFN for each node
-early_node_map[2] active PFN ranges
- 0: 0x00000000 -> 0x0000009f
- 0: 0x00000100 -> 0x000bfe91
-On node 0 totalpages: 785968
- DMA zone: 104 pages used for memmap
- DMA zone: 103 pages reserved
- DMA zone: 3792 pages, LIFO batch:0
- DMA32 zone: 19855 pages used for memmap
- DMA32 zone: 762114 pages, LIFO batch:31
-ACPI: PM-Timer IO Port: 0x1008
-ACPI: Local APIC address 0xfee00000
-ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
-ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
-ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
-ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
-ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
-IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
-ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
-ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
-ACPI: IRQ0 used by override.
-ACPI: IRQ2 used by override.
-ACPI: IRQ9 used by override.
-Using ACPI (MADT) for SMP configuration information
-SMP: Allowing 2 CPUs, 0 hotplug CPUs
-nr_irqs_gsi: 24
-PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
-PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
-Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
-NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
-PERCPU: Embedded 478 pages at ffff880007a00000, static data 1926688 bytes
-Built 1 zonelists in Node order, mobility grouping on. Total pages: 765906
-Policy zone: DMA32
-Kernel command line: ro root=UUID=1e10ddb5-8b5b-4c20-989c-e1b496853d47 rhgb 4 quiet LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_plytheme=spinfinity
-PID hash table entries: 4096 (order: 12, 32768 bytes)
-Initializing CPU#0
-Checking aperture...
-No AGP bridge found
-Calgary: detecting Calgary via BIOS EBDA area
-Calgary: Unable to locate Rio Grande table in EBDA - bailing!
-Memory: 3024132k/3144260k available (5176k kernel code, 388k absent, 119740k reserved, 3132k data, 3196k init)
-SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
-Hierarchical RCU implementation.
-NR_IRQS:4352 nr_irqs:424
-Fast TSC calibration using PIT
-Detected 2161.321 MHz processor.
-Console: colour VGA+ 80x25
-console [tty0] enabled
-Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
-... MAX_LOCKDEP_SUBCLASSES: 8
-... MAX_LOCK_DEPTH: 48
-... MAX_LOCKDEP_KEYS: 8191
-... CLASSHASH_SIZE: 4096
-... MAX_LOCKDEP_ENTRIES: 16384
-... MAX_LOCKDEP_CHAINS: 32768
-... CHAINHASH_SIZE: 16384
- memory used by lock dependency info: 6207 kB
- per task-struct memory footprint: 2688 bytes
-allocated 31457280 bytes of page_cgroup
-please try 'cgroup_disable=memory' option if you don't want memory cgroups
-ODEBUG: 10 of 10 active objects replaced
-Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.64 BogoMIPS (lpj=2161321)
-Security Framework initialized
-SELinux: Initializing.
-SELinux: Starting in permissive mode
-Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
-Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
-Mount-cache hash table entries: 256
-Initializing cgroup subsys ns
-Initializing cgroup subsys cpuacct
-Initializing cgroup subsys memory
-Initializing cgroup subsys devices
-Initializing cgroup subsys freezer
-Initializing cgroup subsys net_cls
-CPU: L1 I cache: 32K, L1 D cache: 32K
-CPU: L2 cache: 4096K
-CPU 0/0x0 -> Node 0
-CPU: Physical Processor ID: 0
-CPU: Processor Core ID: 0
-mce: CPU supports 6 MCE banks
-CPU0: Thermal monitoring enabled (TM2)
-using mwait in idle threads.
-Performance Counters: Core2 events, Intel PMU driver.
-... version: 2
-... bit width: 40
-... generic counters: 2
-... value mask: 000000ffffffffff
-... max period: 000000007fffffff
-... fixed-purpose counters: 3
-... counter mask: 0000000700000003
-ACPI: Core revision 20090521
-ftrace: converting mcount calls to 0f 1f 44 00 00
-ftrace: allocating 21027 entries in 83 pages
-Setting APIC routing to flat
-..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
-CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
-lockdep: fixing up alternatives.
-Booting processor 1 APIC 0x1 ip 0x6000
-Initializing CPU#1
-Calibrating delay using timer specific routine.. 4321.87 BogoMIPS (lpj=2160935)
-CPU: L1 I cache: 32K, L1 D cache: 32K
-CPU: L2 cache: 4096K
-CPU 1/0x1 -> Node 0
-CPU: Physical Processor ID: 0
-CPU: Processor Core ID: 1
-mce: CPU supports 6 MCE banks
-CPU1: Thermal monitoring enabled (TM2)
-x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
-CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
-checking TSC synchronization [CPU#0 -> CPU#1]:
-Measured 4390289644 cycles TSC warp between CPUs, turning off TSC clock.
-Marking TSC unstable due to check_tsc_sync_source failed
-Brought up 2 CPUs
-Total of 2 processors activated (8644.51 BogoMIPS).
-sizeof(vma)=176 bytes
-sizeof(page)=104 bytes
-sizeof(inode)=1168 bytes
-sizeof(dentry)=256 bytes
-sizeof(ext3inode)=1584 bytes
-sizeof(buffer_head)=104 bytes
-sizeof(skbuff)=248 bytes
-sizeof(task_struct)=9304 bytes
-CPU0 attaching sched-domain:
- domain 0: span 0-1 level MC
- groups: 0 1
-CPU1 attaching sched-domain:
- domain 0: span 0-1 level MC
- groups: 1 0
-Booting paravirtualized kernel on bare hardware
-regulator: core version 0.5
-Time: 15:17:42 Date: 09/22/09
-NET: Registered protocol family 16
-ACPI: bus type pci registered
-PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
-PCI: MCFG area at e0000000 reserved in E820
-PCI: Using MMCONFIG at e0000000 - e3ffffff
-PCI: Using configuration type 1 for base access
-bio: create slab <bio-0> at 0
-ACPI: EC: Look up EC in DSDT
-ACPI: Interpreter enabled
-ACPI: (supports S0 S3 S4 S5)
-ACPI: Using IOAPIC for interrupt routing
-ACPI: ACPI Dock Station Driver: 2 docks/bays found
-ACPI: PCI Root Bridge [PCI0] (0000:00)
-pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
-pci 0000:00:01.0: PME# disabled
-pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfffc000-0xdfffffff]
-pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
-pci 0000:00:1b.0: PME# disabled
-pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
-pci 0000:00:1c.0: PME# disabled
-pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
-pci 0000:00:1c.1: PME# disabled
-pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
-pci 0000:00:1c.2: PME# disabled
-pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
-pci 0000:00:1c.3: PME# disabled
-pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
-pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
-pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
-pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
-pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
-pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
-pci 0000:00:1d.7: PME# disabled
-pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
-pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
-pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
-pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
-pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
-pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
-pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
-pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
-pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
-pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
-pci 0000:00:1f.2: PME# supported from D3hot
-pci 0000:00:1f.2: PME# disabled
-pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
-pci 0000:01:00.0: reg 10 32bit mmio: [0xdd000000-0xddffffff]
-pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
-pci 0000:01:00.0: reg 1c 64bit mmio: [0xde000000-0xdeffffff]
-pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
-pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
-pci 0000:00:01.0: bridge 32bit mmio: [0xdd000000-0xdfefffff]
-pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
-pci 0000:0c:00.0: reg 10 32bit mmio: [0xdcfff000-0xdcffffff]
-pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
-pci 0000:0c:00.0: PME# disabled
-pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
-pci 0000:00:1c.1: bridge 32bit mmio: [0xdcf00000-0xdcffffff]
-pci 0000:09:00.0: reg 10 64bit mmio: [0xdcef0000-0xdcefffff]
-pci 0000:09:00.0: PME# supported from D3hot D3cold
-pci 0000:09:00.0: PME# disabled
-pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
-pci 0000:00:1c.2: bridge 32bit mmio: [0xdce00000-0xdcefffff]
-pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
-pci 0000:00:1c.3: bridge 32bit mmio: [0xdcc00000-0xdcdfffff]
-pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd0000000-0xd01fffff]
-pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
-pci 0000:03:01.0: supports D1 D2
-pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci 0000:03:01.0: PME# disabled
-pci 0000:03:01.4: reg 10 32bit mmio: [0xdcbff000-0xdcbfffff]
-pci 0000:03:01.4: reg 14 32bit mmio: [0xdcbfe800-0xdcbfefff]
-pci 0000:03:01.4: supports D1 D2
-pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
-pci 0000:03:01.4: PME# disabled
-pci 0000:00:1e.0: transparent bridge
-pci 0000:00:1e.0: bridge 32bit mmio: [0xdcb00000-0xdcbfffff]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
-ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
-ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
-ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
-ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
-ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
-ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
-ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
-ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
-vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
-vgaarb: loaded
-SCSI subsystem initialized
-libata version 3.00 loaded.
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-PCI: Using ACPI for IRQ routing
-PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
-PCI: pci_cache_line_size set to 64 bytes
-NetLabel: Initializing
-NetLabel: domain hash size = 128
-NetLabel: protocols = UNLABELED CIPSOv4
-NetLabel: unlabeled traffic allowed by default
-DMA-API: preallocated 32768 debug entries
-DMA-API: debugging enabled by kernel config
-hpet clockevent registered
-HPET: 3 timers in total, 0 timers will be used for per-cpu timer
-hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
-hpet0: 3 comparators, 64-bit 14.318180 MHz counter
-Switched to high resolution mode on CPU 0
-Switched to high resolution mode on CPU 1
-pnp: PnP ACPI init
-ACPI: bus type pnp registered
-pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
-pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
-pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
-pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
-pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
-pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
-pnp: PnP ACPI: found 13 devices
-ACPI: ACPI bus type pnp unregistered
-system 00:00: iomem range 0x0-0x9fbff could not be reserved
-system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
-system 00:00: iomem range 0xc0000-0xcffff has been reserved
-system 00:00: iomem range 0xe0000-0xfffff has been reserved
-system 00:00: iomem range 0x100000-0xbfe913ff could not be reserved
-system 00:00: iomem range 0xbfe91400-0xbfefffff has been reserved
-system 00:00: iomem range 0xbff00000-0xbfffffff has been reserved
-system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
-system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
-system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
-system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
-system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
-system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
-system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
-system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved
-system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
-system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
-system 00:02: ioport range 0x4d0-0x4d1 has been reserved
-system 00:03: ioport range 0xf400-0xf4fe has been reserved
-system 00:03: ioport range 0x1080-0x10bf has been reserved
-system 00:03: ioport range 0x10c0-0x10df has been reserved
-system 00:03: ioport range 0x809-0x809 has been reserved
-system 00:08: ioport range 0xc80-0xcff could not be reserved
-system 00:08: ioport range 0x910-0x91f has been reserved
-system 00:08: ioport range 0x920-0x92f has been reserved
-system 00:08: ioport range 0xcbc-0xcbf has been reserved
-system 00:08: ioport range 0x940-0x97f has been reserved
-system 00:0c: ioport range 0xcb0-0xcbb has been reserved
-pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
-pci 0000:00:01.0: IO window: disabled
-pci 0000:00:01.0: MEM window: 0xdd000000-0xdfefffff
-pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
-pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
-pci 0000:00:1c.0: IO window: disabled
-pci 0000:00:1c.0: MEM window: disabled
-pci 0000:00:1c.0: PREFETCH window: disabled
-pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
-pci 0000:00:1c.1: IO window: disabled
-pci 0000:00:1c.1: MEM window: 0xdcf00000-0xdcffffff
-pci 0000:00:1c.1: PREFETCH window: disabled
-pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09
-pci 0000:00:1c.2: IO window: disabled
-pci 0000:00:1c.2: MEM window: 0xdce00000-0xdcefffff
-pci 0000:00:1c.2: PREFETCH window: disabled
-pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
-pci 0000:00:1c.3: IO window: 0xe000-0xefff
-pci 0000:00:1c.3: MEM window: 0xdcc00000-0xdcdfffff
-pci 0000:00:1c.3: PREFETCH window: 0x000000d0000000-0x000000d01fffff
-pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
-pci 0000:03:01.0: IO window: 0x002000-0x0020ff
-pci 0000:03:01.0: IO window: 0x002400-0x0024ff
-pci 0000:03:01.0: PREFETCH window: 0xd4000000-0xd7ffffff
-pci 0000:03:01.0: MEM window: 0xd8000000-0xdbffffff
-pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
-pci 0000:00:1e.0: IO window: 0x2000-0x2fff
-pci 0000:00:1e.0: MEM window: 0xdcb00000-0xdcbfffff
-pci 0000:00:1e.0: PREFETCH window: 0xd4000000-0xd7ffffff
- alloc irq_desc for 16 on node 0
- alloc kstat_irqs on node 0
-pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-pci 0000:00:01.0: setting latency timer to 64
-pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-pci 0000:00:1c.0: setting latency timer to 64
- alloc irq_desc for 17 on node 0
- alloc kstat_irqs on node 0
-pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
-pci 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 18 on node 0
- alloc kstat_irqs on node 0
-pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
-pci 0000:00:1c.2: setting latency timer to 64
- alloc irq_desc for 19 on node 0
- alloc kstat_irqs on node 0
-pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
-pci 0000:00:1c.3: setting latency timer to 64
-pci 0000:00:1e.0: setting latency timer to 64
-pci 0000:03:01.0: enabling device (0000 -> 0003)
-pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
-pci_bus 0000:00: resource 0 io: [0x00-0xffff]
-pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
-pci_bus 0000:01: resource 1 mem: [0xdd000000-0xdfefffff]
-pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
-pci_bus 0000:0c: resource 1 mem: [0xdcf00000-0xdcffffff]
-pci_bus 0000:09: resource 1 mem: [0xdce00000-0xdcefffff]
-pci_bus 0000:0d: resource 0 io: [0xe000-0xefff]
-pci_bus 0000:0d: resource 1 mem: [0xdcc00000-0xdcdfffff]
-pci_bus 0000:0d: resource 2 pref mem [0xd0000000-0xd01fffff]
-pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
-pci_bus 0000:03: resource 1 mem: [0xdcb00000-0xdcbfffff]
-pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd7ffffff]
-pci_bus 0000:03: resource 3 io: [0x00-0xffff]
-pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
-pci_bus 0000:04: resource 0 io: [0x2000-0x20ff]
-pci_bus 0000:04: resource 1 io: [0x2400-0x24ff]
-pci_bus 0000:04: resource 2 pref mem [0xd4000000-0xd7ffffff]
-pci_bus 0000:04: resource 3 mem: [0xd8000000-0xdbffffff]
-NET: Registered protocol family 2
-IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
-TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
-TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
-TCP: Hash tables configured (established 524288 bind 65536)
-TCP reno registered
-NET: Registered protocol family 1
-Trying to unpack rootfs image as initramfs...
-Freeing initrd memory: 12589k freed
-audit: initializing netlink socket (disabled)
-type=2000 audit(1253632663.228:1): initialized
-HugeTLB registered 2 MB page size, pre-allocated 0 pages
-VFS: Disk quotas dquot_6.5.2
-Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
-msgmni has been set to 5931
-SELinux: Registering netfilter hooks
-cryptomgr_test used greatest stack depth: 5728 bytes left
-cryptomgr_test used greatest stack depth: 5520 bytes left
-alg: No test for stdrng (krng)
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
-io scheduler noop registered
-io scheduler anticipatory registered
-io scheduler deadline registered
-io scheduler cfq registered (default)
-pci 0000:01:00.0: Boot video device
- alloc irq_desc for 24 on node 0
- alloc kstat_irqs on node 0
-pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
-pcieport-driver 0000:00:01.0: setting latency timer to 64
- alloc irq_desc for 25 on node 0
- alloc kstat_irqs on node 0
-pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
-pcieport-driver 0000:00:1c.0: setting latency timer to 64
- alloc irq_desc for 26 on node 0
- alloc kstat_irqs on node 0
-pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
-pcieport-driver 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 27 on node 0
- alloc kstat_irqs on node 0
-pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
-pcieport-driver 0000:00:1c.2: setting latency timer to 64
- alloc irq_desc for 28 on node 0
- alloc kstat_irqs on node 0
-pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
-pcieport-driver 0000:00:1c.3: setting latency timer to 64
-pci_hotplug: PCI Hot Plug PCI Core version: 0.5
-pciehp: PCI Express Hot Plug Controller Driver version: 0.4
-acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
-acpiphp_glue: can't get bus number, assuming 0
-decode_hpp: Could not get hotplug parameters. Use defaults
-acpiphp: Slot [1] registered
-acpiphp: Slot [2] registered
-decode_hpp: Could not get hotplug parameters. Use defaults
-acpiphp: Slot [1-1] registered
-ACPI: AC Adapter [AC] (on-line)
-input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
-ACPI: Lid Switch [LID]
-input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
-ACPI: Power Button [PBTN]
-input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
-ACPI: Sleep Button [SBTN]
-ACPI: SSDT 00000000bfe921b3 001F1 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
-ACPI: SSDT 00000000bfe91f68 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
-ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
-processor LNXCPU:00: registered as cooling_device0
-ACPI: Processor [CPU0] (supports 8 throttling states)
-ACPI: SSDT 00000000bfe923a4 00090 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
-ACPI: SSDT 00000000bfe9212e 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
-ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
-processor LNXCPU:01: registered as cooling_device1
-ACPI: Processor [CPU1] (supports 8 throttling states)
-thermal LNXTHERM:01: registered as thermal_zone0
-ACPI: Thermal Zone [THM] (38 C)
-Non-volatile memory driver v1.3
-Linux agpgart interface v0.103
-ACPI: Battery Slot [BAT0] (battery absent)
-ACPI: Battery Slot [BAT1] (battery absent)
-Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
-Clocksource tsc unstable (delta = 2031283261 ns)
-serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-brd: module loaded
-loop: module loaded
-input: Macintosh mouse button emulation as /devices/virtual/input/input3
-ata_piix 0000:00:1f.2: version 2.13
-ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
-ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
-ata_piix 0000:00:1f.2: setting latency timer to 64
-scsi0 : ata_piix
-scsi1 : ata_piix
-ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
-ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
-work_for_cpu used greatest stack depth: 4240 bytes left
-Fixed MDIO Bus: probed
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- alloc irq_desc for 20 on node 0
- alloc kstat_irqs on node 0
-ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
-ehci_hcd 0000:00:1d.7: setting latency timer to 64
-ehci_hcd 0000:00:1d.7: EHCI Host Controller
-ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
-ehci_hcd 0000:00:1d.7: debug port 1
-ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
-ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
-ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
-usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
-usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb1: Product: EHCI Host Controller
-usb usb1: Manufacturer: Linux 2.6.31-14.fc12.x86_64 ehci_hcd
-usb usb1: SerialNumber: 0000:00:1d.7
-usb usb1: configuration #1 chosen from 1 choice
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 8 ports detected
-work_for_cpu used greatest stack depth: 3856 bytes left
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-uhci_hcd: USB Universal Host Controller Interface driver
-uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
-uhci_hcd 0000:00:1d.0: setting latency timer to 64
-uhci_hcd 0000:00:1d.0: UHCI Host Controller
-uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
-uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
-usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
-usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb2: Product: UHCI Host Controller
-usb usb2: Manufacturer: Linux 2.6.31-14.fc12.x86_64 uhci_hcd
-usb usb2: SerialNumber: 0000:00:1d.0
-usb usb2: configuration #1 chosen from 1 choice
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 2 ports detected
- alloc irq_desc for 21 on node 0
- alloc kstat_irqs on node 0
-uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
-uhci_hcd 0000:00:1d.1: setting latency timer to 64
-uhci_hcd 0000:00:1d.1: UHCI Host Controller
-uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
-uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
-usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
-usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb3: Product: UHCI Host Controller
-usb usb3: Manufacturer: Linux 2.6.31-14.fc12.x86_64 uhci_hcd
-usb usb3: SerialNumber: 0000:00:1d.1
-usb usb3: configuration #1 chosen from 1 choice
-hub 3-0:1.0: USB hub found
-hub 3-0:1.0: 2 ports detected
- alloc irq_desc for 22 on node 0
- alloc kstat_irqs on node 0
-uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
-uhci_hcd 0000:00:1d.2: setting latency timer to 64
-uhci_hcd 0000:00:1d.2: UHCI Host Controller
-uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
-uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
-usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
-usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb4: Product: UHCI Host Controller
-usb usb4: Manufacturer: Linux 2.6.31-14.fc12.x86_64 uhci_hcd
-usb usb4: SerialNumber: 0000:00:1d.2
-usb usb4: configuration #1 chosen from 1 choice
-hub 4-0:1.0: USB hub found
-hub 4-0:1.0: 2 ports detected
- alloc irq_desc for 23 on node 0
- alloc kstat_irqs on node 0
-uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
-uhci_hcd 0000:00:1d.3: setting latency timer to 64
-uhci_hcd 0000:00:1d.3: UHCI Host Controller
-uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
-uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
-usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
-usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb5: Product: UHCI Host Controller
-usb usb5: Manufacturer: Linux 2.6.31-14.fc12.x86_64 uhci_hcd
-usb usb5: SerialNumber: 0000:00:1d.3
-usb usb5: configuration #1 chosen from 1 choice
-hub 5-0:1.0: USB hub found
-hub 5-0:1.0: 2 ports detected
-PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
-serio: i8042 KBD port at 0x60,0x64 irq 1
-serio: i8042 AUX port at 0x60,0x64 irq 12
-mice: PS/2 mouse device common for all mice
-rtc_cmos 00:06: RTC can wake from S4
-rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
-rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
-device-mapper: uevent: version 1.0.3
-device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
-cpuidle: using governor ladder
-input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
-cpuidle: using governor menu
-usbcore: registered new interface driver hiddev
-usbcore: registered new interface driver usbhid
-usbhid: v2.6:USB HID core driver
-nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
-CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
-nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
-sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
-ip_tables: (C) 2000-2006 Netfilter Core Team
-TCP cubic registered
-Initializing XFRM netlink socket
-NET: Registered protocol family 17
-PM: Resume from disk failed.
-registered taskstats version 1
-No TPM chip found, activating TPM-bypass!
- Magic number: 9:980:285
-acpi PNP0C04:00: hash matches
-rtc_cmos 00:06: setting system clock to 2009-09-22 15:17:43 UTC (1253632663)
-Initalizing network drop monitor service
-ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102G9, max UDMA/133
-ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
-ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B101, max UDMA/33
-ata1.00: configured for UDMA/133
-scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
-sd 0:0:0:0: Attached scsi generic sg0 type 0
-sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
-sd 0:0:0:0: [sda] Write Protect is off
-sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
-sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3
-sd 0:0:0:0: [sda] Attached SCSI disk
-ata2.00: configured for UDMA/33
-scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B101 PQ: 0 ANSI: 5
-sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
-Uniform CD-ROM driver Revision: 3.20
-sr 1:0:0:0: Attached scsi CD-ROM sr0
-sr 1:0:0:0: Attached scsi generic sg1 type 5
-Freeing unused kernel memory: 3196k freed
-NX-protecting the kernel data: ffffffff8150e000, 4469 pages
-Write protecting the kernel read-only data: 7392k
-dracut: dracut-002-2.gitc53acc30.fc12
-udev: starting version 145
-------------[ cut here ]------------
-WARNING: at kernel/trace/ftrace.c:1003 ftrace_bug+0x198/0x27e() (Not tainted)
-Hardware name: Precision M65
-Modules linked in: i2c_core(+)
-Pid: 96, comm: modprobe Not tainted 2.6.31-14.fc12.x86_64 #1
-Call Trace:
- [<ffffffff81064244>] warn_slowpath_common+0x95/0xc3
- [<ffffffffa0003072>] ? i2c_new_dummy+0x8/0x5e [i2c_core]
- [<ffffffff81064299>] warn_slowpath_null+0x27/0x3d
- [<ffffffff810d4a0e>] ftrace_bug+0x198/0x27e
- [<ffffffffa0003072>] ? i2c_new_dummy+0x8/0x5e [i2c_core]
- [<ffffffff810d5c66>] ftrace_convert_nops+0x201/0x2b9
- [<ffffffffa0003072>] ? i2c_new_dummy+0x8/0x5e [i2c_core]
- [<ffffffff810d5d6a>] ftrace_module_notify+0x4c/0x7f
- [<ffffffff815099a5>] notifier_call_chain+0x72/0xba
- [<ffffffff81086db1>] ? __blocking_notifier_call_chain+0x4c/0x8e
- [<ffffffff81086dc8>] __blocking_notifier_call_chain+0x63/0x8e
- [<ffffffff81086e1a>] blocking_notifier_call_chain+0x27/0x3d
- [<ffffffff810a466a>] sys_init_module+0xb7/0x249
- [<ffffffff81011f42>] system_call_fastpath+0x16/0x1b
----[ end trace 01b4a242f338ca8f ]---
-ftrace faulted on writing [<ffffffffa0003072>] i2c_new_dummy+0x8/0x5e [i2c_core]
-[drm] Initialized drm 1.1.0 20060810
-nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-nouveau 0000:01:00.0: setting latency timer to 64
-nvidia-control: failed to evaluate _DSM: 5
-nouveau 0000:01:00.0: Detected an NV40 generation card (0x046c00a3)
-nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
-nouveau 0000:01:00.0: ... BIOS signature not found
-nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
-nouveau 0000:01:00.0: ... appears to be valid
-nouveau 0000:01:00.0: BIT BIOS found
-nouveau 0000:01:00.0: Bios version 05.72.22.21
-nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
-nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000004
-nouveau 0000:01:00.0: Raw DCB entry 1: 01011300 00000028
-nouveau 0000:01:00.0: Raw DCB entry 2: 04022312 00000000
-nouveau 0000:01:00.0: Raw DCB entry 3: 020333f1 0020c070
-nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEFAE
-nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF2DF
-nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF866
-nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF9BE
-nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB70
-usb 2-2: new full speed USB device using uhci_hcd and address 2
-[TTM] Zone kernel: Available graphics memory: 1519960 kiB.
-nouveau 0000:01:00.0: Allocating FIFO number 0
-nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
-nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
-nouveau 0000:01:00.0: Enable TV-Out with tv module option
-nouveau 0000:01:00.0: Detected a LVDS connector
-integrated sync not supported
-nouveau 0000:01:00.0: Detected a VGA connector
-nouveau 0000:01:00.0: Detected a DVI-D connector
-nouveau 0000:01:00.0: Saving VGA fonts
-usb 2-2: New USB device found, idVendor=413c, idProduct=a005
-usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-usb 2-2: configuration #1 chosen from 1 choice
-hub 2-2:1.0: USB hub found
-hub 2-2:1.0: 4 ports detected
-input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
-integrated sync not supported
-input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
-allocated 1920x1200 fb: 0x49000, bo ffff88003763c038
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-usb 3-1: new full speed USB device using uhci_hcd and address 2
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 20
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-usb 3-1: New USB device found, idVendor=0b97, idProduct=7761
-usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-usb 3-1: configuration #1 chosen from 1 choice
-hub 3-1:1.0: USB hub found
-hub 3-1:1.0: 3 ports detected
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-usb 2-2.3: new full speed USB device using uhci_hcd and address 3
-async/0 used greatest stack depth: 3680 bytes left
-async/1 used greatest stack depth: 3520 bytes left
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-Console: switching to colour frame buffer device 240x75
-fb0: nouveaufb frame buffer device
-registered panic notifier
-[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
-work_for_cpu used greatest stack depth: 3408 bytes left
-usb 2-2.3: New USB device found, idVendor=413c, idProduct=8103
-usb 2-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-usb 2-2.3: configuration #1 chosen from 1 choice
-dracut: Starting plymouth daemon
-integrated sync not supported
-usb 3-1.1: new full speed USB device using uhci_hcd and address 3
-usb 3-1.1: New USB device found, idVendor=0483, idProduct=2016
-usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.1: Product: Biometric Coprocessor
-usb 3-1.1: Manufacturer: STMicroelectronics
-usb 3-1.1: configuration #1 chosen from 1 choice
-usb 3-1.2: new full speed USB device using uhci_hcd and address 4
-input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/device:22/input/input7
-ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
-usb 3-1.2: New USB device found, idVendor=0b97, idProduct=7762
-usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.2: Product: O2Micro CCID SC Reader
-usb 3-1.2: Manufacturer: O2
-usb 3-1.2: configuration #1 chosen from 1 choice
-cdrom_id used greatest stack depth: 3256 bytes left
-yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01c8]
-yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
-yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
-yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
-yenta_cardbus 0000:03:01.0: Socket status: 30000006
-pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
-yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
-yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdcb00000 - 0xdcbfffff
-yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7ffffff
-EXT4-fs (sda3): INFO: recovery required on readonly filesystem
-EXT4-fs (sda3): write access will be enabled during recovery
-EXT4-fs (sda3): barriers enabled
-kjournald2 starting: pid 263, dev sda3:8, commit interval 5 seconds
-EXT4-fs (sda3): delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs (sda3): orphan cleanup on readonly fs
-EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 137191
-EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 137919
-EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 137100
-EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 137923
-EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 136574
-EXT4-fs (sda3): 5 orphan inodes deleted
-EXT4-fs (sda3): recovery complete
-EXT4-fs (sda3): mounted filesystem with ordered data mode
-dracut: Mounted root filesystem /dev/sda3
-dracut: Loading SELinux policy
-type=1404 audit(1253632666.834:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
-SELinux: 8192 avtab hash slots, 130696 rules.
-SELinux: 8192 avtab hash slots, 130696 rules.
-SELinux: 8 users, 12 roles, 2853 types, 129 bools, 1 sens, 1024 cats
-SELinux: 75 classes, 130696 rules
-SELinux: Completing initialization.
-SELinux: Setting up existing superblocks.
-SELinux: initialized (dev sda3, type ext4), uses xattr
-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
-SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
-SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
-SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
-SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
-SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
-SELinux: initialized (dev devpts, type devpts), uses transition SIDs
-SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
-SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
-SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
-SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
-SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
-SELinux: initialized (dev proc, type proc), uses genfs_contexts
-SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
-SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
-SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
-type=1403 audit(1253632667.601:3): policy loaded auid=4294967295 ses=4294967295
-dracut: Switching root
-udev: starting version 145
-type=1400 audit(1253632669.332:4): avc: denied { read } for pid=363 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-type=1400 audit(1253632669.332:5): avc: denied { open } for pid=363 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-tg3.c:v3.99 (April 20, 2009)
-tg3 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
-tg3 0000:09:00.0: setting latency timer to 64
-tg3 0000:09:00.0: wake-up capability disabled by ACPI
-tg3 0000:09:00.0: PME# disabled
-cfg80211: Calling CRDA to update world regulatory domain
-eth0: Tigon3 [partno(BCM5752KFBG) rev 6002] (PCI Express) MAC address 00:15:c5:08:10:91
-eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1])
-eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
-eth0: dma_rwctrl[76180000] dma_mask[64-bit]
-HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
-HDA Intel 0000:00:1b.0: setting latency timer to 64
-iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
-iwl3945: Copyright(c) 2003-2009 Intel Corporation
-Bluetooth: Core ver 2.15
-NET: Registered protocol family 31
-Bluetooth: HCI device and connection manager initialized
-Bluetooth: HCI socket layer initialized
-Bluetooth: Generic Bluetooth USB driver ver 0.5
-usbcore: registered new interface driver btusb
-type=1400 audit(1253632669.800:6): avc: denied { read } for pid=473 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-type=1400 audit(1253632669.800:7): avc: denied { open } for pid=473 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
-ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
-ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
-ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
-ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x9/0x0
-ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0xf, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0
-intel_rng: FWH not detected
-iTCO_vendor_support: vendor-support=0
-iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
-iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
-iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
-input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
-input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
-i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
-iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
-iwl3945 0000:0c:00.0: setting latency timer to 64
-firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
-dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
-firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
-iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
-iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
- alloc irq_desc for 29 on node 0
- alloc kstat_irqs on node 0
-iwl3945 0000:0c:00.0: irq 29 for MSI/MSI-X
-udev: renamed network interface eth0 to eth1
-phy0: Selected rate control algorithm 'iwl-3945-rs'
-cfg80211: World regulatory domain updated:
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
-udev: renamed network interface wlan0 to wlan1
-type=1400 audit(1253632670.606:8): avc: denied { sys_module } for pid=605 comm="iw" capability=16 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=capability
-cfg80211: Calling CRDA for country: US
-cfg80211: Regulatory domain changed to country: US
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
-firewire_core: created device fw0: GUID 374fc00026e76921, S400
-ip used greatest stack depth: 3064 bytes left
-device-mapper: multipath: version 1.1.0 loaded
-EXT4-fs (sda3): internal journal on sda3:8
-EXT4-fs (sda1): barriers enabled
-kjournald2 starting: pid 694, dev sda1:8, commit interval 5 seconds
-EXT4-fs (sda1): internal journal on sda1:8
-EXT4-fs (sda1): delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs (sda1): mounted filesystem with ordered data mode
-SELinux: initialized (dev sda1, type ext4), uses xattr
-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
-Adding 6143992k swap on /dev/sda2. Priority:-1 extents:1 across:6143992k SS
-SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
-type=1400 audit(1253632672.411:9): avc: denied { read } for pid=840 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-type=1400 audit(1253632672.411:10): avc: denied { open } for pid=840 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x0
-platform microcode: firmware: requesting intel-ucode/06-0f-06
-type=1400 audit(1253632672.428:11): avc: denied { read } for pid=841 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-type=1400 audit(1253632672.428:12): avc: denied { open } for pid=841 comm="modprobe" name="modprobe.d" dev=sda3 ino=98306 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:modules_conf_t:s0 tclass=dir
-microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x0
-platform microcode: firmware: requesting intel-ucode/06-0f-06
-Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
-microcode: CPU0 updated to revision 0xc7, date = 2007-03-15
-microcode: CPU1 updated to revision 0xc7, date = 2007-03-15
-Microcode Update Driver: v2.00 removed.
-NET: Registered protocol family 10
-lo: Disabled Privacy Extensions
-ip6_tables: (C) 2000-2006 Netfilter Core Team
-iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
-iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
-Registered led device: iwl-phy0::radio
-Registered led device: iwl-phy0::assoc
-Registered led device: iwl-phy0::RX
-Registered led device: iwl-phy0::TX
-ADDRCONF(NETDEV_UP): wlan1: link is not ready
-tg3 0000:09:00.0: wake-up capability disabled by ACPI
-tg3 0000:09:00.0: PME# disabled
- alloc irq_desc for 30 on node 0
- alloc kstat_irqs on node 0
-tg3 0000:09:00.0: irq 30 for MSI/MSI-X
-ADDRCONF(NETDEV_UP): eth1: link is not ready
-RPC: Registered udp transport module.
-RPC: Registered tcp transport module.
-SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
-Bluetooth: L2CAP ver 2.13
-Bluetooth: L2CAP socket layer initialized
-Bluetooth: BNEP (Ethernet Emulation) ver 1.3
-Bluetooth: BNEP filters: protocol multicast
-Bridge firewalling registered
-Bluetooth: SCO (Voice Link) ver 0.6
-Bluetooth: SCO socket layer initialized
-hub 3-1:1.0: hub_port_status failed (err = -71)
-hub 3-1:1.0: cannot disable port 1 (err = -71)
-hub 3-1:1.0: hub_port_status failed (err = -71)
-hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
-usb 3-1: USB disconnect, address 2
-usb 3-1.1: USB disconnect, address 3
-usb 3-1.2: USB disconnect, address 4
-Bluetooth: RFCOMM TTY layer initialized
-Bluetooth: RFCOMM socket layer initialized
-Bluetooth: RFCOMM ver 1.11
-usb 3-1: new full speed USB device using uhci_hcd and address 5
-usb 3-1: New USB device found, idVendor=0b97, idProduct=7761
-usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-usb 3-1: configuration #1 chosen from 1 choice
-hub 3-1:1.0: USB hub found
-hub 3-1:1.0: 3 ports detected
-usb 3-1.1: new full speed USB device using uhci_hcd and address 6
-tg3: eth1: Link is up at 100 Mbps, full duplex.
-tg3: eth1: Flow control is off for TX and off for RX.
-ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
-usb 3-1.1: New USB device found, idVendor=0483, idProduct=2016
-usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.1: Product: Biometric Coprocessor
-usb 3-1.1: Manufacturer: STMicroelectronics
-usb 3-1.1: configuration #1 chosen from 1 choice
-usb 3-1.2: new full speed USB device using uhci_hcd and address 7
-usb 3-1.2: New USB device found, idVendor=0b97, idProduct=7762
-usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.2: Product: O2Micro CCID SC Reader
-usb 3-1.2: Manufacturer: O2
-usb 3-1.2: configuration #1 chosen from 1 choice
-eth1: no IPv6 routers present
-hub 3-1:1.0: hub_port_status failed (err = -71)
-hub 3-1:1.0: cannot disable port 1 (err = -71)
-hub 3-1:1.0: hub_port_status failed (err = -71)
-hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
-usb 3-1: USB disconnect, address 5
-usb 3-1.1: USB disconnect, address 6
-usb 3-1.2: USB disconnect, address 7
-usb 3-1: new full speed USB device using uhci_hcd and address 8
-usb 3-1: New USB device found, idVendor=0b97, idProduct=7761
-usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-usb 3-1: configuration #1 chosen from 1 choice
-hub 3-1:1.0: USB hub found
-hub 3-1:1.0: 3 ports detected
-usb 3-1.1: new full speed USB device using uhci_hcd and address 9
-usb 3-1.1: New USB device found, idVendor=0483, idProduct=2016
-usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.1: Product: Biometric Coprocessor
-usb 3-1.1: Manufacturer: STMicroelectronics
-usb 3-1.1: configuration #1 chosen from 1 choice
-usb 3-1.2: new full speed USB device using uhci_hcd and address 10
-usb 3-1.2: New USB device found, idVendor=0b97, idProduct=7762
-usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.2: Product: O2Micro CCID SC Reader
-usb 3-1.2: Manufacturer: O2
-usb 3-1.2: configuration #1 chosen from 1 choice
-hub 3-1:1.0: hub_port_status failed (err = -71)
-hub 3-1:1.0: cannot disable port 1 (err = -71)
-hub 3-1:1.0: hub_port_status failed (err = -71)
-hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
-usb 3-1: USB disconnect, address 8
-usb 3-1.1: USB disconnect, address 9
-usb 3-1.2: USB disconnect, address 10
-usb 3-1: new full speed USB device using uhci_hcd and address 11
-usb 3-1: New USB device found, idVendor=0b97, idProduct=7761
-usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-usb 3-1: configuration #1 chosen from 1 choice
-hub 3-1:1.0: USB hub found
-hub 3-1:1.0: 3 ports detected
-usb 3-1.1: new full speed USB device using uhci_hcd and address 12
-usb 3-1.1: New USB device found, idVendor=0483, idProduct=2016
-usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.1: Product: Biometric Coprocessor
-usb 3-1.1: Manufacturer: STMicroelectronics
-usb 3-1.1: configuration #1 chosen from 1 choice
-usb 3-1.2: new full speed USB device using uhci_hcd and address 13
-usb 3-1.2: New USB device found, idVendor=0b97, idProduct=7762
-usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 3-1.2: Product: O2Micro CCID SC Reader
-usb 3-1.2: Manufacturer: O2
-usb 3-1.2: configuration #1 chosen from 1 choice
-ar used greatest stack depth: 2936 bytes left
-integrated sync not supported
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-integrated sync not supported
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 30
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: vpll: n 65 m 12 log2p 0
-[drm] DAC-8: set mode 1680x1050 32
-nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
-nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output A
-nouveau 0000:01:00.0: Setting dpms mode 1 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-integrated sync not supported
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 2f
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: vpll: n 65 m 12 log2p 0
-[drm] DAC-8: set mode 1680x1050 33
-nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
-nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 20
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-Disabling lock debugging due to kernel taint
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: 0xE5D8: Parsing digital output script table
-nouveau 0000:01:00.0: Restoring VGA fonts
-Console: switching to colour VGA+ 80x25
-unregistered panic notifier
-nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 0
-[TTM] Zone kernel: Used memory at exit: 0 kiB.
-[drm] Module unloaded
-nouveau 0000:01:00.0: setting latency timer to 64
-nvidia-control: failed to evaluate _DSM: 5
-nouveau 0000:01:00.0: Detected an NV40 generation card (0x046c00a3)
-nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
-nouveau 0000:01:00.0: ... BIOS signature not found
-nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
-nouveau 0000:01:00.0: ... appears to be valid
-nouveau 0000:01:00.0: BIT BIOS found
-nouveau 0000:01:00.0: Bios version 05.72.22.21
-nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
-nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000004
-nouveau 0000:01:00.0: Raw DCB entry 1: 01011300 00000028
-nouveau 0000:01:00.0: Raw DCB entry 2: 04022312 00000000
-nouveau 0000:01:00.0: Raw DCB entry 3: 020333f1 0020c070
-nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEFAE
-nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF2DF
-nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF866
-nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF9BE
-nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB70
-[TTM] Zone kernel: Available graphics memory: 1519960 kiB.
-nouveau 0000:01:00.0: Allocating FIFO number 0
-nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
-nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
-nouveau 0000:01:00.0: Enable TV-Out with tv module option
-nouveau 0000:01:00.0: Detected a LVDS connector
-integrated sync not supported
-nouveau 0000:01:00.0: Detected a VGA connector
-nouveau 0000:01:00.0: Detected a DVI-D connector
-nouveau 0000:01:00.0: Saving VGA fonts
-integrated sync not supported
-allocated 1920x1200 fb: 0x49000, bo ffff8800b6de4038
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 2d
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-2 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: vpll: n 65 m 12 log2p 0
-[drm] DAC-8: set mode 1680x1050 2e
-nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
-nouveau 0000:01:00.0: Output VGA-2 is running on CRTC 1 using output A
-Console: switching to colour frame buffer device 210x65
-fb0: nouveaufb frame buffer device
-registered panic notifier
-[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
-integrated sync not supported
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-integrated sync not supported
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 30
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-2 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: vpll: n 65 m 12 log2p 0
-[drm] DAC-8: set mode 1680x1050 33
-nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
-nouveau 0000:01:00.0: Output VGA-2 is running on CRTC 1 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-integrated sync not supported
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 32
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-2 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: vpll: n 65 m 12 log2p 0
-[drm] DAC-8: set mode 1680x1050 35
-nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
-nouveau 0000:01:00.0: Output VGA-2 is running on CRTC 1 using output A
-nouveau 0000:01:00.0: Setting dpms mode 1 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: 0xE5D8: Parsing digital output script table
-nouveau 0000:01:00.0: Restoring VGA fonts
-Console: switching to colour VGA+ 80x25
-unregistered panic notifier
-nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 0
-[TTM] Zone kernel: Used memory at exit: 0 kiB.
-[drm] Module unloaded
-***********************************************
-nouveau 0000:01:00.0: setting latency timer to 64
-nvidia-control: failed to evaluate _DSM: 5
-nouveau 0000:01:00.0: Detected an NV40 generation card (0x046c00a3)
-nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
-nouveau 0000:01:00.0: ... BIOS signature not found
-nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
-nouveau 0000:01:00.0: ... appears to be valid
-nouveau 0000:01:00.0: BIT BIOS found
-nouveau 0000:01:00.0: Bios version 05.72.22.21
-nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
-nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000004
-nouveau 0000:01:00.0: Raw DCB entry 1: 01011300 00000028
-nouveau 0000:01:00.0: Raw DCB entry 2: 04022312 00000000
-nouveau 0000:01:00.0: Raw DCB entry 3: 020333f1 0020c070
-nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEFAE
-nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF2DF
-nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF866
-nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF9BE
-nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB70
-[TTM] Zone kernel: Available graphics memory: 1519960 kiB.
-nouveau 0000:01:00.0: Allocating FIFO number 0
-nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
-nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
-nouveau 0000:01:00.0: Enable TV-Out with tv module option
-nouveau 0000:01:00.0: Detected a LVDS connector
-integrated sync not supported
-nouveau 0000:01:00.0: Detected a VGA connector
-nouveau 0000:01:00.0: Detected a DVI-D connector
-nouveau 0000:01:00.0: Saving VGA fonts
-integrated sync not supported
-allocated 1920x1200 fb: 0x49000, bo ffff8800b8c8de30
-nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 6:
-nouveau 0000:01:00.0: 0xE319: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
-nouveau 0000:01:00.0: vpll: n 24 m 4 log2p 0
-[drm] LVDS-7: set mode 1920x1200 2d
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
-nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
-nouveau 0000:01:00.0: Calling LVDS script 2:
-nouveau 0000:01:00.0: 0xE396: Parsing digital output script table
-nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
-nouveau 0000:01:00.0: Calling LVDS script 5:
-nouveau 0000:01:00.0: 0xE30A: Parsing digital output script table
-nouveau 0000:01:00.0: Output LVDS-3 is running on CRTC 0 using output A
-nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
-nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
-nouveau 0000:01:00.0: vpll: n 65 m 12 log2p 0
-[drm] DAC-8: set mode 1680x1050 2e
-nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
-nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
-nouveau 0000:01:00.0: Output VGA-3 is running on CRTC 1 using output A
-Console: switching to colour frame buffer device 210x65
-fb0: nouveaufb frame buffer device
-registered panic notifier
-[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
-++++++++++++++++++++++++++++++++++++++++++
-integrated sync not supported
-=====================================
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
projects / thirdparty / plymouth.git / commitdiff
