+2019-07-08 Robin Dapp <rdapp@linux.ibm.com>
+
+ * config/s390/constraints.md: Add new jsc constraint.
+ * config/s390/predicates.md: New predicates.
+ * config/s390/s390-protos.h (s390_valid_shift_count): New function.
+ * config/s390/s390.c (s390_valid_shift_count): New function.
+ (print_shift_count_operand): Use s390_valid_shift_count.
+ (print_operand): Likewise.
+ * config/s390/s390.md: Use new predicate.
+ * config/s390/subst.md: Remove addr_style_op and masked_op substs.
+ * config/s390/vector.md: Use new predicate.
+
2019-07-08 Joern Rennecke <joern.rennecke@riscy-ip.com>
Avoid clash with system header declaration.
(match_test "s390_decompose_addrstyle_without_index (op, NULL, NULL)" ))
+;; Shift count operands are not necessarily legitimate addresses
+;; but the predicate shift_count_operand will only allow
+;; proper operands. If reload/lra need to change e.g. a spilled register
+;; they can still do so via the special handling of address constraints.
+;; To avoid further reloading (caused by a non-matching constraint) we
+;; always return true here as the predicate's checks are already sufficient.
+
+(define_address_constraint "jsc"
+ "Address style operand used as shift count."
+ (match_test "true" ))
+
+
;; N -- Multiple letter constraint followed by 4 parameter letters.
;; 0..9,x: number of the part counting from most to least significant
;; S,H,Q: mode of the part
{
return memory_operand (op, mode) && !contains_symbol_ref_p (op);
})
+
+;; Check for a valid shift count operand with an implicit
+;; shift truncation mask of 63.
+
+(define_predicate "shift_count_operand"
+ (and (match_code "reg, subreg, and, plus, const_int")
+ (match_test "CONST_INT_P (op) || GET_MODE (op) == E_QImode"))
+{
+ return s390_valid_shift_count (op, 63);
+}
+)
+
+;; This is used as operand predicate. As we do not know
+;; the mode of the first operand here and the shift truncation
+;; mask depends on the mode, we cannot check the mask.
+;; This is supposed to happen in the insn condition which
+;; calls s390_valid_shift_count with the proper mode size.
+;; We need two separate predicates for non-vector and vector
+;; shifts since the (less restrictive) insn condition is checked
+;; after the more restrictive operand predicate which will
+;; disallow the operand before we can check the condition.
+
+(define_predicate "shift_count_operand_vec"
+ (and (match_code "reg, subreg, and, plus, const_int")
+ (match_test "CONST_INT_P (op) || GET_MODE (op) == E_QImode"))
+{
+ return s390_valid_shift_count (op, 0);
+}
+)
extern bool s390_legitimate_address_without_index_p (rtx);
extern bool s390_decompose_addrstyle_without_index (rtx, rtx *,
HOST_WIDE_INT *);
+extern bool s390_valid_shift_count (rtx op, HOST_WIDE_INT required_mask = 63);
extern int s390_branch_condition_mask (rtx);
extern int s390_compare_and_branch_condition_mask (rtx);
extern bool s390_extzv_shift_ok (int, int, unsigned HOST_WIDE_INT);
return true;
}
+/* Check that OP is a valid shift count operand.
+ It should be of the following structure:
+ (subreg (and (plus (reg imm_op)) 2^k-1) 7)
+ where subreg, and and plus are optional.
+
+ If IMPLICIT_MASK is > 0 and OP contains and
+ (AND ... immediate)
+ it is checked whether IMPLICIT_MASK and the immediate match.
+ Otherwise, no checking is performed.
+ */
+bool
+s390_valid_shift_count (rtx op, HOST_WIDE_INT implicit_mask)
+{
+ /* Strip subreg. */
+ while (GET_CODE (op) == SUBREG && subreg_lowpart_p (op))
+ op = XEXP (op, 0);
+
+ /* Check for an and with proper constant. */
+ if (GET_CODE (op) == AND)
+ {
+ rtx op1 = XEXP (op, 0);
+ rtx imm = XEXP (op, 1);
+
+ if (GET_CODE (op1) == SUBREG && subreg_lowpart_p (op1))
+ op1 = XEXP (op1, 0);
+
+ if (!(register_operand (op1, GET_MODE (op1)) || GET_CODE (op1) == PLUS))
+ return false;
+
+ if (!immediate_operand (imm, GET_MODE (imm)))
+ return false;
+
+ HOST_WIDE_INT val = INTVAL (imm);
+ if (implicit_mask > 0
+ && (val & implicit_mask) != implicit_mask)
+ return false;
+
+ op = op1;
+ }
+
+ /* Check the rest. */
+ return s390_decompose_addrstyle_without_index (op, NULL, NULL);
+}
/* Return true if CODE is a valid address without index. */
fprintf (file, "(%s)", reg_names[REGNO (base)]);
}
+/* Print the shift count operand OP to FILE.
+ OP is an address-style operand in a form which
+ s390_valid_shift_count permits. Subregs and no-op
+ and-masking of the operand are stripped. */
+
+static void
+print_shift_count_operand (FILE *file, rtx op)
+{
+ /* No checking of the and mask required here. */
+ if (!s390_valid_shift_count (op, 0))
+ gcc_unreachable ();
+
+ while (op && GET_CODE (op) == SUBREG)
+ op = SUBREG_REG (op);
+
+ if (GET_CODE (op) == AND)
+ op = XEXP (op, 0);
+
+ print_addrstyle_operand (file, op);
+}
+
/* Assigns the number of NOP halfwords to be emitted before and after the
function label to *HW_BEFORE and *HW_AFTER. Both pointers must not be NULL.
If hotpatching is disabled for the function, the values are set to zero.
break;
case 'Y':
- print_addrstyle_operand (file, x);
+ print_shift_count_operand (file, x);
return;
}
(define_expand "rotl<mode>3"
[(set (match_operand:GPR 0 "register_operand" "")
(rotate:GPR (match_operand:GPR 1 "register_operand" "")
- (match_operand:SI 2 "nonmemory_operand" "")))]
+ (match_operand:QI 2 "shift_count_operand" "")))]
""
"")
; rll, rllg
-(define_insn "*rotl<mode>3<addr_style_op><masked_op>"
+(define_insn "*rotl<mode>3"
[(set (match_operand:GPR 0 "register_operand" "=d")
(rotate:GPR (match_operand:GPR 1 "register_operand" "d")
- (match_operand:SI 2 "nonmemory_operand" "an")))]
+ (match_operand:QI 2 "shift_count_operand" "jsc")))]
""
- "rll<g>\t%0,%1,<addr_style_op_ops>"
+ "rll<g>\t%0,%1,%Y2"
[(set_attr "op_type" "RSE")
(set_attr "atype" "reg")
(set_attr "z10prop" "z10_super_E1")])
(define_expand "<shift><mode>3"
[(set (match_operand:DSI 0 "register_operand" "")
(SHIFT:DSI (match_operand:DSI 1 "register_operand" "")
- (match_operand:SI 2 "nonmemory_operand" "")))]
+ (match_operand:QI 2 "shift_count_operand" "")))]
""
"")
; ESA 64 bit register pair shift with reg or imm shift count
; sldl, srdl
-(define_insn "*<shift>di3_31<addr_style_op><masked_op>"
+(define_insn "*<shift>di3_31"
[(set (match_operand:DI 0 "register_operand" "=d")
(SHIFT:DI (match_operand:DI 1 "register_operand" "0")
- (match_operand:SI 2 "nonmemory_operand" "an")))]
+ (match_operand:QI 2 "shift_count_operand" "jsc")))]
"!TARGET_ZARCH"
- "s<lr>dl\t%0,<addr_style_op_ops>"
+ "s<lr>dl\t%0,%Y2"
[(set_attr "op_type" "RS")
(set_attr "atype" "reg")
(set_attr "z196prop" "z196_cracked")])
; 64 bit register shift with reg or imm shift count
; sll, srl, sllg, srlg, sllk, srlk
-(define_insn "*<shift><mode>3<addr_style_op><masked_op>"
+(define_insn "*<shift><mode>3"
[(set (match_operand:GPR 0 "register_operand" "=d, d")
(SHIFT:GPR (match_operand:GPR 1 "register_operand" "<d0>, d")
- (match_operand:SI 2 "nonmemory_operand" "an,an")))]
+ (match_operand:QI 2 "shift_count_operand" "jsc,jsc")))]
""
"@
- s<lr>l<g>\t%0,<1><addr_style_op_ops>
- s<lr>l<gk>\t%0,%1,<addr_style_op_ops>"
+ s<lr>l<g>\t%0,<1>%Y2
+ s<lr>l<gk>\t%0,%1,%Y2"
[(set_attr "op_type" "RS<E>,RSY")
(set_attr "atype" "reg,reg")
(set_attr "cpu_facility" "*,z196")
(set_attr "z10prop" "z10_super_E1,*")])
+
;
; ashr(di|si)3 instruction pattern(s).
; Arithmetic right shifts
[(parallel
[(set (match_operand:DSI 0 "register_operand" "")
(ashiftrt:DSI (match_operand:DSI 1 "register_operand" "")
- (match_operand:SI 2 "nonmemory_operand" "")))
+ (match_operand:QI 2 "shift_count_operand" "")))
(clobber (reg:CC CC_REGNUM))])]
""
"")
; number of 2 in the subst pattern for the (clobber (match_scratch...
; The right fix should be to support match_scratch in the output
; pattern of a define_subst.
-(define_insn "*ashrdi3_31<addr_style_op_cc><masked_op_cc><setcc><cconly>"
+(define_insn "*ashrdi3_31<setcc><cconly>"
[(set (match_operand:DI 0 "register_operand" "=d, d")
(ashiftrt:DI (match_operand:DI 1 "register_operand" "0, 0")
- (match_operand:SI 2 "nonmemory_operand" "an,an")))
+ (match_operand:QI 2 "shift_count_operand" "jsc,jsc")))
(clobber (reg:CC CC_REGNUM))]
"!TARGET_ZARCH"
"@
- srda\t%0,<addr_style_op_cc_ops>
- srda\t%0,<addr_style_op_cc_ops>"
+ srda\t%0,%Y2
+ srda\t%0,%Y2"
[(set_attr "op_type" "RS")
(set_attr "atype" "reg")])
; sra, srag
-(define_insn "*ashr<mode>3<addr_style_op_cc><masked_op_cc><setcc><cconly>"
+(define_insn "*ashr<mode>3<setcc><cconly>"
[(set (match_operand:GPR 0 "register_operand" "=d, d")
(ashiftrt:GPR (match_operand:GPR 1 "register_operand" "<d0>, d")
- (match_operand:SI 2 "nonmemory_operand" "an,an")))
+ (match_operand:QI 2 "shift_count_operand" "jsc,jsc")))
(clobber (reg:CC CC_REGNUM))]
""
"@
- sra<g>\t%0,<1><addr_style_op_cc_ops>
- sra<gk>\t%0,%1,<addr_style_op_cc_ops>"
+ sra<g>\t%0,<1>%Y2
+ sra<gk>\t%0,%1,%Y2"
[(set_attr "op_type" "RS<E>,RSY")
(set_attr "atype" "reg")
(set_attr "cpu_facility" "*,z196")
(define_code_iterator SUBST [rotate ashift lshiftrt ashiftrt])
(define_mode_iterator DSI_VI [SI DI V2QI V4QI V8QI V16QI V2HI V4HI V8HI V2SI V4SI V2DI])
-; This expands an register/immediate operand to a register+immediate
-; operand to draw advantage of the address style operand format
-; providing a addition for free.
-(define_subst "addr_style_op_subst"
- [(set (match_operand:DSI_VI 0 "" "")
- (SUBST:DSI_VI (match_operand:DSI_VI 1 "" "")
- (match_operand:SI 2 "" "")))]
- ""
- [(set (match_dup 0)
- (SUBST:DSI_VI (match_dup 1)
- (plus:SI (match_operand:SI 2 "register_operand" "a")
- (match_operand 3 "const_int_operand" "n"))))])
-
-; Use this in the insn name.
-(define_subst_attr "addr_style_op" "addr_style_op_subst" "" "_plus")
-
-; In the subst pattern the additional const int operand will be used
-; as displacement. In the normal version %Y is able to print the
-; operand either as displacement or as base register.
-(define_subst_attr "addr_style_op_ops" "addr_style_op_subst" "%Y2" "%Y3(%2)")
-
-
-; This substitution adds an explicit AND operation to the second
-; operand. This way previous operations on the now masked out bits
-; might get optimized away.
-(define_subst "masked_op_subst"
- [(set (match_operand:DSI 0 "" "")
- (SUBST:DSI (match_operand:DSI 1 "" "")
- (match_operand:SI 2 "" "")))]
- ""
- [(set (match_dup 0)
- (SUBST:DSI (match_dup 1)
- (and:SI (match_dup 2)
- (match_operand:SI 3 "const_int_6bitset_operand" "jm6"))))])
-
-; Use this in the insn name.
-(define_subst_attr "masked_op" "masked_op_subst" "" "_and")
-
-
-
-; This is like the addr_style_op substitution above but with a CC clobber.
-(define_subst "addr_style_op_cc_subst"
- [(set (match_operand:DSI 0 "" "")
- (ashiftrt:DSI (match_operand:DSI 1 "" "")
- (match_operand:SI 2 "" "")))
- (clobber (reg:CC CC_REGNUM))]
- "REG_P (operands[2])"
- [(set (match_dup 0)
- (ashiftrt:DSI (match_dup 1)
- (plus:SI (match_dup 2)
- (match_operand 3 "const_int_operand" "n"))))
- (clobber (reg:CC CC_REGNUM))])
-
-(define_subst_attr "addr_style_op_cc" "addr_style_op_cc_subst" "" "_plus")
-(define_subst_attr "addr_style_op_cc_ops" "addr_style_op_cc_subst" "%Y2" "%Y3(%2)")
-
-
-; This is like the masked_op substitution but with a CC clobber.
-(define_subst "masked_op_cc_subst"
- [(set (match_operand:DSI 0 "" "")
- (ashiftrt:DSI (match_operand:DSI 1 "" "")
- (match_operand:SI 2 "" "")))
- (clobber (reg:CC CC_REGNUM))]
- ""
- [(set (match_dup 0)
- (ashiftrt:DSI (match_dup 1)
- (and:SI (match_dup 2)
- (match_operand:SI 3 "const_int_6bitset_operand" ""))))
- (clobber (reg:CC CC_REGNUM))])
-(define_subst_attr "masked_op_cc" "masked_op_cc_subst" "" "_and")
-
-
; This adds an explicit CC reg set to an operation while keeping the
; set for the operation result as well.
(define_subst "setcc_subst"
(define_expand "<vec_shifts_name><mode>3"
[(set (match_operand:VI 0 "register_operand" "")
(VEC_SHIFTS:VI (match_operand:VI 1 "register_operand" "")
- (match_operand:SI 2 "nonmemory_operand" "")))]
+ (match_operand:QI 2 "shift_count_operand" "")))]
"TARGET_VX")
; verllb, verllh, verllf, verllg
; veslb, veslh, veslf, veslg
; vesrab, vesrah, vesraf, vesrag
; vesrlb, vesrlh, vesrlf, vesrlg
-(define_insn "*<vec_shifts_name><mode>3<addr_style_op>"
+(define_insn "*<vec_shifts_name><mode>3"
[(set (match_operand:VI 0 "register_operand" "=v")
(VEC_SHIFTS:VI (match_operand:VI 1 "register_operand" "v")
- (match_operand:SI 2 "nonmemory_operand" "an")))]
- "TARGET_VX"
- "<vec_shifts_mnem><bhfgq>\t%v0,%v1,<addr_style_op_ops>"
+ (match_operand:QI 2 "shift_count_operand_vec" "jsc")))]
+ "TARGET_VX
+ && s390_valid_shift_count (operands[2],
+ GET_MODE_BITSIZE (GET_MODE_INNER (<MODE>mode)) - 1)
+ "
+ "<vec_shifts_mnem><bhfgq>\t%v0,%v1,%Y2"
[(set_attr "op_type" "VRS")])
+
; Shift each element by corresponding vector element
; veslvb, veslvh, veslvf, veslvg
+2019-07-08 Robin Dapp <rdapp@linux.ibm.com>
+
+ * gcc.target/s390/combine-rotate-modulo.c: New test.
+ * gcc.target/s390/combine-shift-rotate-add-mod.c: New test.
+ * gcc.target/s390/vector/combine-shift-vec.c: New test.
+
2019-07-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/91108
--- /dev/null
+/* Check that we do not emit & 63 via risbg for rotating. */
+
+/* { dg-options "-O1 -m64" } */
+
+/* { dg-final { scan-assembler-not "risbg" } } */
+/* { dg-final { scan-assembler-not "nilf" } } */
+
+long shiftl (long in, unsigned long sh)
+{
+ sh %= 64;
+ return (in << sh);
+}
+
+unsigned long shiftll (unsigned long in, unsigned long sh)
+{
+ sh %= 64;
+ return (in << sh);
+}
+
+long shiftr (long in, unsigned long sh)
+{
+ sh %= 64;
+ return (in >> sh);
+}
+
+unsigned long shiftrl (unsigned long in, unsigned long sh)
+{
+ sh %= 64;
+ return (in >> sh);
+}
+
+unsigned long rotlmod (unsigned long in, unsigned long sh)
+{
+ sh %= 64;
+ return (in << sh) | (in >> (64 - sh));
+}
--- /dev/null
+/* Check shift via address-style displacement. There should not be any
+ and operations that the instructions perform implicitly anyway.*/
+
+/* { dg-options "-O1 -m64" } */
+
+/* { dg-final { scan-assembler-not "risbg\t%r.+,.*63" } } */
+/* { dg-final { scan-assembler "rllg\t%r.+,3.%r.+" } } */
+/* { dg-final { scan-assembler "sllg\t%r.+,2.%r.+" } } */
+
+unsigned long rotlmodp (unsigned long in, unsigned long sh)
+{
+ sh = (sh + 3) % 64;
+ return (in << sh) | (in >> (64 - sh));
+}
+
+unsigned long shiftmodp (unsigned long in, unsigned long sh)
+{
+ sh = (sh + 2) % 64;
+ return (in << sh);
+}
+
+/* We expect a displacement of 1 here since combine simplifies
+ modulo 255 when substituting into a QImode subreg. */
+/* { dg-final { scan-assembler "sllg\t%r.+,1.%r.+" } } */
+unsigned long shiftp (unsigned long in, unsigned long sh)
+{
+ sh = sh + 4097;
+ return (in << sh);
+}
--- /dev/null
+/* Check vector shift patterns. */
+
+/* { dg-options "-march=z13 -O1 -m64" } */
+
+/* { dg-final { scan-assembler "veslb\t%v.+,%v.+,2.%r2" } } */
+/* { dg-final { scan-assembler "veslh\t%v.+,%v.+,3.%r2" } } */
+/* { dg-final { scan-assembler "veslf\t%v.+,%v.+,4.%r2" } } */
+/* { dg-final { scan-assembler "veslg\t%v.+,%v.+,5.%r2" } } */
+/* { dg-final { scan-assembler "vesrab\t%v.+,%v.+,2.%r2" } } */
+/* { dg-final { scan-assembler "vesrah\t%v.+,%v.+,3.%r2" } } */
+/* { dg-final { scan-assembler "vesraf\t%v.+,%v.+,4.%r2" } } */
+/* { dg-final { scan-assembler "vesrag\t%v.+,%v.+,5.%r2" } } */
+/* { dg-final { scan-assembler "vesrlb\t%v.+,%v.+,2.%r2" } } */
+/* { dg-final { scan-assembler "vesrlh\t%v.+,%v.+,3.%r2" } } */
+/* { dg-final { scan-assembler "vesrlf\t%v.+,%v.+,4.%r2" } } */
+/* { dg-final { scan-assembler "vesrlg\t%v.+,%v.+,5.%r2" } } */
+/* { dg-final { scan-assembler-not "ahi" } } */
+/* { dg-final { scan-assembler-not "nilf" } } */
+/* { dg-final { scan-assembler-not "risbg" } } */
+
+typedef __attribute__((vector_size(16))) signed char v16qi;
+
+v16qi vshiftlqi (v16qi in, unsigned int sh)
+{
+ sh = (sh + 2) % 8;
+ return (in << sh);
+}
+
+typedef __attribute__((vector_size(16))) signed short v8hi;
+
+v8hi vshiftlhi (v8hi in, unsigned int sh)
+{
+ sh = (sh + 3) % 16;
+ return (in << sh);
+}
+
+typedef __attribute__((vector_size(16))) signed int v4si;
+
+v4si vshiftlsi (v4si in, unsigned int sh)
+{
+ sh = (sh + 4) % 32;
+ return (in << sh);
+}
+
+typedef __attribute__((vector_size(16))) signed long v2di;
+
+v2di vshiftldi (v2di in, unsigned int sh)
+{
+ sh = (sh + 5) % 64;
+ return (in << sh);
+}
+
+typedef __attribute__((vector_size(16))) unsigned char uv16qi;
+
+uv16qi vshiftrqiu (uv16qi in, unsigned int sh)
+{
+ sh = (sh + 2) % 8;
+ return (in >> sh);
+}
+
+typedef __attribute__((vector_size(16))) unsigned short uv8hi;
+
+uv8hi vshiftrhiu (uv8hi in, unsigned int sh)
+{
+ sh = (sh + 3) % 16;
+ return (in >> sh);
+}
+
+typedef __attribute__((vector_size(16))) unsigned int uv4si;
+
+uv4si vshiftrsiu (uv4si in, unsigned int sh)
+{
+ sh = (sh + 4) % 32;
+ return (in >> sh);
+}
+
+typedef __attribute__((vector_size(16))) unsigned long uv2di;
+
+uv2di vshiftrdiu (uv2di in, unsigned int sh)
+{
+ sh = (sh + 5) % 64;
+ return (in >> sh);
+}
+
+v16qi vshiftrqi (v16qi in, unsigned int sh)
+{
+ sh = (sh + 2) % 8;
+ return (in >> sh);
+}
+
+v8hi vshiftrhi (v8hi in, unsigned int sh)
+{
+ sh = (sh + 3) % 16;
+ return (in >> sh);
+}
+
+v4si vshiftrsi (v4si in, unsigned int sh)
+{
+ sh = (sh + 4) % 32;
+ return (in >> sh);
+}
+
+v2di vshiftrdi (v2di in, unsigned int sh)
+{
+ sh = (sh + 5) % 64;
+ return (in >> sh);
+}
projects / thirdparty / gcc.git / commitdiff
