usb: host: oxu210hp: remove unused struct 'ehci_dbg_port'

'ehci_dbg_port' is unused in oxu210hp-hcd.c since it's original
commit b92a78e582b1 ("usb host: Oxford OXU210HP HCD driver.")
when it was in a separate header.

Remove it.

Note, that this structure, and some others in the driver
are mostly clones of include/linux/usb/ehci_def.h.
Someone with the hardware to be able to test it might
be able to remove a lot more structs as well and just
use that header.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20240529210002.106369-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index d467472f9d3c4353cd887cc3719bb3f831ff8ca1..3f871fe62b90f23e217c79a63f7b505dc49d7195 100644 (file)
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -196,31 +196,6 @@ struct ehci_regs {
 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
 } __packed;
 
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-       u32     control;
-#define DBGP_OWNER     (1<<30)
-#define DBGP_ENABLED   (1<<28)
-#define DBGP_DONE      (1<<16)
-#define DBGP_INUSE     (1<<10)
-#define DBGP_ERRCODE(x)        (((x)>>7)&0x07)
-#      define DBGP_ERR_BAD     1
-#      define DBGP_ERR_SIGNAL  2
-#define DBGP_ERROR     (1<<6)
-#define DBGP_GO                (1<<5)
-#define DBGP_OUT       (1<<4)
-#define DBGP_LEN(x)    (((x)>>0)&0x0f)
-       u32     pids;
-#define DBGP_PID_GET(x)                (((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok)        (((data)<<8)|(tok))
-       u32     data03;
-       u32     data47;
-       u32     address;
-#define DBGP_EPADDR(dev, ep)   (((dev)<<8)|(ep))
-} __packed;
-
 #define        QTD_NEXT(dma)   cpu_to_le32((u32)dma)
 
 /*