board: phytec: migrate imx8mm boards to standard boot

remove boot logic from shared env file for phyboard-polis and
phygate-tauri.
Adjust configs for both boards as well.
Space at the beginning of addressable RAM is reserved for space used via
standard boot env variables. CONFIG_SYS_LOAD_ADDR is set to the lowest
address behind the standard boot variables reserved space.

Signed-off-by: Yannic Moog <y.moog@phytec.de>

diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
index 402d967ab7d58ad206c1b6c03d6f039a77ddef8b..b3f0915432829219e0d6e0d89b1003d789988db4 100644 (file)
--- a/board/phytec/phycore_imx8mm/phycore_imx8mm.env
+++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
@@ -1,65 +1,15 @@
-#include <env/phytec/rauc.env>
-
-bootcmd=
-       mmc dev ${mmcdev};
-       if mmc rescan; then
-               if test ${doraucboot} = 1; then
-                       run raucinit;
-               fi;
-               if run loadimage; then
-                       run mmcboot;
-               else
-                       run netboot;
-               fi;
-       fi;
-console=ttymxc2,115200
+console=ttymxc2,CONFIG_BAUDRATE
 emmc_dev=2
-fdt_addr_r=0x48000000
 fdtfile=CONFIG_DEFAULT_FDT_FILE
-image=Image
+fdt_addr_r=0x40480000
+fdt_overlay_addr_r=0x404a0000
+kernel_addr_r=0x40a00000
+kernel_comp_addr_r=0x43a00000
+kernel_comp_size=0x1e00000
+pxefile_addr_r=0x45800000
+ramdisk_addr_r=0x45802000
+scriptaddr=0x47600000
+script_offset_f=0x0
+script_size_f=0x2000
 ip_dyn=yes
-loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
-loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
-mmcargs=
-       setenv bootargs console=${console}
-       root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
-mmcautodetect=yes
-mmcboot=
-       echo Booting from mmc ...;
-       run mmcargs;
-       if run loadfdt; then
-               if test ${dofitboot} = 1; then
-                       booti ${loadaddr} - ${fdt_addr_r}
-               else
-                       echo WARN: Cannot load the DT;
-               fi;
-       fi;
-mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
-mmcpart=1
-mmcroot=2
-netargs=
-       setenv bootargs console=${console} root=/dev/nfs ip=dhcp
-       nfsroot=${serverip}:${nfsroot},v3,tcp
-netboot=
-       echo Booting from net ...;
-       if test ${ip_dyn} = yes; then
-               setenv get_cmd dhcp;
-       else
-               setenv get_cmd tftp;
-       fi;
-       ${get_cmd} ${loadaddr} ${image};
-       run netargs;
-       if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
-               booti ${loadaddr} - ${fdt_addr_r};
-       else
-               echo WARN: Cannot load the DT;
-       fi;
 nfsroot=/srv/nfs
-update_bootimg=
-       mmc dev ${mmcdev};
-       if dhcp ${loadaddr} ${update_filepath}/${update_filename}; then
-               setexpr fw_sz ${filesize} / 0x200;
-               mmc write ${loadaddr} ${update_offset} ${fw_sz};
-       fi;
-update_filename=flash.bin
-update_offset=0x42

diff --git a/configs/imx8mm-phygate-tauri-l_defconfig b/configs/imx8mm-phygate-tauri-l_defconfig
index 7c8a2060b1a8a658eb94e57223775e709d0d848e..7369c0a05ac98315682127f0e96af7d36c4763d2 100644 (file)
--- a/configs/imx8mm-phygate-tauri-l_defconfig
+++ b/configs/imx8mm-phygate-tauri-l_defconfig
@@ -9,7 +9,6 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-phygate-tauri-l"
-CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x56000000
 CONFIG_TARGET_PHYCORE_IMX8MM=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
@@ -20,16 +19,15 @@ CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x47602000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3E0000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_BOOTSTD_FULL=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
-CONFIG_DEFAULT_FDT_FILE="oftree"
+CONFIG_DEFAULT_FDT_FILE="imx8mm-phygate-tauri-l"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
@@ -44,7 +42,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
@@ -60,15 +57,9 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y

diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 96eacec1d2309a20184236f9c84beb1e4cd01f27..4d6bce26f07f7b90e7c3674f4b9ddcac8d775e1d 100644 (file)
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -11,7 +11,7 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-phyboard-polis-rdk"
-CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x56000000
+CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x7e000000
 CONFIG_TARGET_PHYCORE_IMX8MM=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
@@ -23,7 +23,7 @@ CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x47602000
 CONFIG_SF_DEFAULT_BUS=3
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3E0000
@@ -31,8 +31,9 @@ CONFIG_PCI=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_BOOTSTD_FULL=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_DEFAULT_FDT_FILE="oftree"
+CONFIG_DEFAULT_FDT_FILE="imx8mm-phyboard-polis-rdk"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
@@ -48,7 +49,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
@@ -66,15 +66,9 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SF_TEST=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y