arm64: zynqmp: Remove si5328 and si5382 nodes

There are no drivers for these devices that's why remove that nodes
completely. This change is done based on Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com

diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index aef4bd579e482f2652f6196f639c29b24bec1e80..b7a103ceae58e5bc506285ea9df6e2b1d6ed83fb 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -165,10 +165,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
-                       clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
-                               compatible = "idt,8t49n287";
-                               reg = <0x6c>;
-                       };
+                       /* 8T49N287 - u182 */
                };
 
                i2c@2 {

diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 95d47b9073172a55ac06afc4617a92365472abf1..8bba53ff195f889f4c7517367b1af1523861a20f 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -189,10 +189,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
-                       clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
-                               compatible = "idt,8t49n287";
-                               reg = <0x6c>;
-                       };
+                       /* 8T49N287 - u182 */
                };
 
                i2c@2 {

diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index cda655d807610180f191dd5f3837a95f85babaab..6bbecd67d171fae9c38809e823910bbcdab27e0f 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -480,10 +480,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <4>;
-                       si5382: clock-generator@69 { /* SI5382 - u48 */
-                               compatible = "silabs,si5382";
-                               reg = <0x69>;
-                       };
+                       /* SI5382 - u48 */
                };
                i2c@5 {
                        #address-cells = <1>;