On s390 feraiseexcept (FE_OVERFLOW|FE_UNDERFLOW) sets FE_INEXACT, too.
This patch uses z196 zarch load rounded instruction which can suppress
FE_INEXACT exception if gcc has z196 support in used configuration.
Otherwise FE_INEXACT flag is set as before. The gcc support is tested
in a new configure-check.
A comment in fsetexcptflg.c is corrected as new exceptions are not
executed with the next floating-point instruction if fpc is set with
_FPU_SETCW macro. It seems the comment was copied e.g. from
sysdeps/x86_64/fpu/fsetexcptflg.c file.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT):
New undefine.
* sysdeps/s390/configure.ac: Add test for z196 zarch support.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra
instruction for raising over-/underflow if z196 zarch is supported
by default.
* sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag):
Correct comment.
+2016-08-31 Stefan Liebler <stli@linux.vnet.ibm.com>
+
+ * config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT): New undefine.
+ * sysdeps/s390/configure.ac: Add test for z196 zarch support.
+ * sysdeps/s390/configure: Regenerated.
+ * sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra
+ instruction for raising over-/underflow if z196 zarch is supported
+ by default.
+ * sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag): Correct comment.
+
2016-08-30 Svante Signell <svante.signell@gmail.com>
* sysdeps/mach/hurd/adjtime.c (__adjtime): When OLDDELTA is NULL, make
/* Define if assembler supports AVX512DQ. */
#undef HAVE_AVX512DQ_ASM_SUPPORT
+/* Define if assembler supports z196 zarch instructions as default on S390. */
+#undef HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT
+
/* Define if assembler supports vector instructions on S390. */
#undef HAVE_S390_VX_ASM_SUPPORT
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for S390 z196 zarch instruction support as default" >&5
+$as_echo_n "checking for S390 z196 zarch instruction support as default... " >&6; }
+if ${libc_cv_asm_s390_min_z196_zarch+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat > conftest.c <<\EOF
+float testinsn (double e)
+{
+ float d;
+ __asm__ ("ledbra %0,5,%1,4" : "=f" (d) : "f" (e) );
+ return d;
+}
+EOF
+if { ac_try='${CC-cc} $CFLAGS $CPPFLAGS $LDFLAGS --shared conftest.c
+ -o conftest.o &> /dev/null'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; } ;
+then
+ libc_cv_asm_s390_min_z196_zarch=yes
+else
+ libc_cv_asm_s390_min_z196_zarch=no
+fi
+rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_asm_s390_min_z196_zarch" >&5
+$as_echo "$libc_cv_asm_s390_min_z196_zarch" >&6; }
+
+if test "$libc_cv_asm_s390_min_z196_zarch" = yes ;
+then
+ $as_echo "#define HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT 1" >>confdefs.h
+
+fi
+
test -n "$critic_missing" && as_fn_error $? "
*** $critic_missing" "$LINENO" 5
AC_DEFINE(HAVE_S390_VX_GCC_SUPPORT)
fi
+AC_CACHE_CHECK(for S390 z196 zarch instruction support as default,
+ libc_cv_asm_s390_min_z196_zarch, [dnl
+cat > conftest.c <<\EOF
+float testinsn (double e)
+{
+ float d;
+ __asm__ ("ledbra %0,5,%1,4" : "=f" (d) : "f" (e) );
+ return d;
+}
+EOF
+dnl
+dnl test, if assembler supports S390 z196 zarch instructions as default
+if AC_TRY_COMMAND([${CC-cc} $CFLAGS $CPPFLAGS $LDFLAGS --shared conftest.c
+ -o conftest.o &> /dev/null]) ;
+then
+ libc_cv_asm_s390_min_z196_zarch=yes
+else
+ libc_cv_asm_s390_min_z196_zarch=no
+fi
+rm -f conftest* ])
+
+if test "$libc_cv_asm_s390_min_z196_zarch" = yes ;
+then
+ AC_DEFINE(HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT)
+fi
+
test -n "$critic_missing" && AC_MSG_ERROR([
*** $critic_missing])
__asm__ __volatile__ ("aebr %0,%1" : : "f" (d), "f" (e) );
}
+#ifdef HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT
+static __inline__ void
+fexceptround (double e)
+{
+ float d;
+ /* Load rounded from double to float with M3 = round toward 0, M4 = Suppress
+ IEEE-inexact exception.
+ In case of e=0x1p128 and the overflow-mask bit is zero, only the
+ IEEE-overflow flag is set. If overflow-mask bit is one, DXC field is set to
+ 0x20 "IEEE overflow, exact".
+ In case of e=0x1p-150 and the underflow-mask bit is zero, only the
+ IEEE-underflow flag is set. If underflow-mask bit is one, DXC field is set
+ to 0x10 "IEEE underflow, exact".
+ This instruction is available with a zarch machine >= z196. */
+ __asm__ __volatile__ ("ledbra %0,5,%1,4" : "=f" (d) : "f" (e) );
+}
+#endif
int
__feraiseexcept (int excepts)
/* Next: overflow. */
if (FE_OVERFLOW & excepts)
- /* I don't think we can do the same trick as intel so we will have
- to live with inexact coming also. */
- fexceptadd (FLT_MAX, 1.0e32);
+ {
+#ifdef HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT
+ fexceptround (0x1p128);
+#else
+ /* If overflow-mask bit is zero, both IEEE-overflow and IEEE-inexact flags
+ are set. If overflow-mask bit is one, DXC field is set to 0x2C "IEEE
+ overflow, inexact and incremented". */
+ fexceptadd (FLT_MAX, 1.0e32);
+#endif
+ }
/* Next: underflow. */
if (FE_UNDERFLOW & excepts)
- fexceptdiv (FLT_MIN, 3.0);
+ {
+#ifdef HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT
+ fexceptround (0x1p-150);
+#else
+ /* If underflow-mask bit is zero, both IEEE-underflow and IEEE-inexact
+ flags are set. If underflow-mask bit is one, DXC field is set to 0x1C
+ "IEEE underflow, inexact and incremented". */
+ fexceptdiv (FLT_MIN, 3.0);
+#endif
+ }
/* Last: inexact. */
if (FE_INEXACT & excepts)
& newexcepts;
/* Store the new status word (along with the rest of the environment.
- Possibly new exceptions are set but they won't get executed unless
- the next floating-point instruction. */
+ Possibly new exceptions are set but they won't get executed. */
_FPU_SETCW (temp);
/* Success. */
projects / thirdparty / glibc.git / commitdiff
