# cp $(ldnsdir)/examples/ldns-testpkts.h testcode/ldns-testpkts.h
ifeq "$(WITH_PYTHONMODULE)" "yes"
-pythonmod/pythonmod.c: pythonmod/interface.h
+$(srcdir)/pythonmod/pythonmod.c: pythonmod/interface.h
%.h: $(srcdir)/%.i $(srcdir)/config.h
@-if test ! -d $(dir $@); then $(INSTALL) -d $(patsubst %/,%,$(dir $@)); fi
$(INFO) Swig $<
+26 March 2009: Wouter
+ - ignore swig varargs warnings with gcc.
+ - remove duplicate example.conf text from python example configs.
+ - outofdir compile fix for python.
+
25 March 2009: Wouter
- initial import of the python contribution from Zdenek Vasicek and
Marek Vavrusa.
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
+
+/* ignore the varargs unused warning from SWIGs internal vararg support */
+#ifdef __GNUC__
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
#include "config.h"
#include "pythonmod/pythonmod.h"
#include "util/module.h"
-#
-# Example configuration file.
-#
-# See unbound.conf(5) man page.
-#
-# this is a comment.
-
-#Use this to include other text into the file.
-#include: "otherfile.conf"
-
-# The server clause sets the main parameters.
+# Example configuration file for calc.py
server:
- # whitespace is not necessary, but looks cleaner.
-
- # verbosity number, 0 is least verbose. 1 is default.
verbosity: 1
-
- # print statistics to the log (for every thread) every N seconds.
- # Set to "" or 0 to disable. Default is disabled.
- # statistics-interval: 0
-
- # enable cumulative statistics, without clearing them after printing.
- # statistics-cumulative: no
-
- # enable extended statistics (query types, answer codes, status)
- # printed from unbound-control. default off, because of speed.
- # extended-statistics: no
-
- # number of threads to create. 1 disables threading.
- # num-threads: 1
-
- # specify the interfaces to answer queries from by ip-address.
- # The default is to listen to localhost (127.0.0.1 and ::1).
- # specify 0.0.0.0 and ::0 to bind to all available interfaces.
- # specify every interface on a new 'interface:' labelled line.
- # The listen interfaces are not changed on reload, only on restart.
interface: 0.0.0.0
- # interface: 192.0.2.154
- # interface: 2001:DB8::5
-
- # enable this feature to copy the source address of queries to reply.
- # Socket options are not supported on all platforms. experimental.
- # interface-automatic: no
-
- # port to answer queries from
- # port: 53
-
- # specify the interfaces to send outgoing queries to authoritative
- # server from by ip-address. If none, the default (all) interface
- # is used. Specify every interface on a 'outgoing-interface:' line.
- # outgoing-interface: 192.0.2.153
- # outgoing-interface: 2001:DB8::5
- # outgoing-interface: 2001:DB8::6
-
- # number of ports to allocate per thread, determines the size of the
- # port range that can be open simultaneously.
- # outgoing-range: 256
-
- # permit unbound to use this port number or port range for
- # making outgoing queries, using an outgoing interface.
- # outgoing-port-permit: 32768
-
- # deny unbound the use this of port number or port range for
- # making outgoing queries, using an outgoing interface.
- # Use this to make sure unbound does not grab a UDP port that some
- # other server on this computer needs. The default is to avoid
- # IANA-assigned port numbers.
- # outgoing-port-avoid: "3200-3208"
-
- # number of outgoing simultaneous tcp buffers to hold per thread.
- # outgoing-num-tcp: 10
-
- # number of incoming simultaneous tcp buffers to hold per thread.
- # incoming-num-tcp: 10
-
- # buffer size for handling DNS data. No messages larger than this
- # size can be sent or received, by UDP or TCP. In bytes.
- # msg-buffer-size: 65552
-
- # the amount of memory to use for the message cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # msg-cache-size: 4m
-
- # the number of slabs to use for the message cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # msg-cache-slabs: 4
-
- # the number of queries that a thread gets to service.
- # num-queries-per-thread: 1024
-
- # if very busy, 50% queries run to completion, 50% get timeout in msec
- # jostle-timeout: 200
-
- # the amount of memory to use for the RRset cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # rrset-cache-size: 4m
-
- # the number of slabs to use for the RRset cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # rrset-cache-slabs: 4
-
- # the time to live (TTL) value cap for RRsets and messages in the
- # cache. Items are not cached for longer. In seconds.
- # cache-max-ttl: 86400
-
- # the time to live (TTL) value for cached roundtrip times and
- # EDNS version information for hosts. In seconds.
- # infra-host-ttl: 900
-
- # the time to live (TTL) value for cached lame delegations. In sec.
- # infra-lame-ttl: 900
-
- # the number of slabs to use for the Infrastructure cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # infra-cache-slabs: 4
-
- # the maximum number of hosts that are cached (roundtrip times, EDNS).
- # infra-cache-numhosts: 10000
-
- # the maximum size of the lame zones cached per host. in bytes.
- # infra-cache-lame-size: 10k
-
- # Enable IPv4, "yes" or "no".
- # do-ip4: yes
-
- # Enable IPv6, "yes" or "no".
- # do-ip6: yes
-
- # Enable UDP, "yes" or "no".
- # do-udp: yes
-
- # Enable TCP, "yes" or "no".
- # do-tcp: yes
-
- # Detach from the terminal, run in background, "yes" or "no".
do-daemonize: no
-
- # control which clients are allowed to make (recursive) queries
- # to this server. Specify classless netblocks with /size and action.
- # By default everything is refused, except for localhost.
- # Choose deny (drop message), refuse (polite error reply),
- # allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
access-control: 0.0.0.0/0 allow
- # access-control: 127.0.0.0/8 allow
- # access-control: ::0/0 refuse
- # access-control: ::1 allow
- # access-control: ::ffff:127.0.0.1 allow
-
- # if given, a chroot(2) is done to the given directory.
- # i.e. you can chroot to the working directory, for example,
- # for extra security, but make sure all files are in that directory.
- #
- # If chroot is enabled, you should pass the configfile (from the
- # commandline) as a full path from the original root. After the
- # chroot has been performed the now defunct portion of the config
- # file path is removed to be able to reread the config after a reload.
- #
- # All other file paths (working dir, logfile, roothints, and
- # key files) can be specified in several ways:
- # o as an absolute path relative to the new root.
- # o as a relative path to the working directory.
- # o as an absolute path relative to the original root.
- # In the last case the path is adjusted to remove the unused portion.
- #
- # The pid file can be absolute and outside of the chroot, it is
- # written just prior to performing the chroot and dropping permissions.
- #
- # Additionally, unbound may need to access /dev/random (for entropy).
- # How to do this is specific to your OS.
- #
- # If you give "" no chroot is performed. The path must not end in a /.
- chroot: ""
-
- # if given, user privileges are dropped (after binding port),
- # and the given username is assumed. Default is user "unbound".
- # If you give "" no privileges are dropped.
+ chroot: ""
username: ""
-
- # the working directory. The relative files in this config are
- # relative to this directory. If you give "" the working directory
- # is not changed.
directory: ""
-
- # the log file, "" means log to stderr.
- # Use of this option sets use-syslog to "no".
logfile: ""
-
- # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
- # log to, with identity "unbound". If yes, it overrides the logfile.
- # use-syslog: yes
-
- # the pid file. Can be an absolute path outside of chroot/work dir.
pidfile: "unbound.pid"
-
- # file to read root hints from.
- # get one from ftp://FTP.INTERNIC.NET/domain/named.cache
- # root-hints: ""
-
- # enable to not answer id.server and hostname.bind queries.
- # hide-identity: no
-
- # enable to not answer version.server and version.bind queries.
- # hide-version: no
-
- # the identity to report. Leave "" or default to return hostname.
- # identity: ""
-
- # the version to report. Leave "" or default to return package version.
- # version: ""
-
- # the target fetch policy.
- # series of integers describing the policy per dependency depth.
- # The number of values in the list determines the maximum dependency
- # depth the recursor will pursue before giving up. Each integer means:
- # -1 : fetch all targets opportunistically,
- # 0: fetch on demand,
- # positive value: fetch that many targets opportunistically.
- # Enclose the list of numbers between quotes ("").
- # target-fetch-policy: "3 2 1 0 0"
-
- # Harden against very small EDNS buffer sizes.
- # harden-short-bufsize: no
-
- # Harden against unseemly large queries.
- # harden-large-queries: no
-
- # Harden against out of zone rrsets, to avoid spoofing attempts.
- # harden-glue: yes
-
- # Harden against receiving dnssec-stripped data. If you turn it
- # off, failing to validate dnskey data for a trustanchor will
- # trigger insecure mode for that zone (like without a trustanchor).
- # Default on, which insists on dnssec data for trust-anchored zones.
- # harden-dnssec-stripped: yes
-
- # Harden the referral path by performing additional queries for
- # infrastructure data. Validates the replies (if possible).
- # Default off, because the lookups burden the server. Experimental
- # implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
- # harden-referral-path: no
-
- # Use 0x20-encoded random bits in the query to foil spoof attempts.
- # This feature is an experimental implementation of draft dns-0x20.
- # use-caps-for-id: no
-
- # Enforce privacy of these addresses. Strips them away from answers.
- # It may cause DNSSEC validation to additionally mark it as bogus.
- # Protects against 'DNS Rebinding' (uses browser as network proxy).
- # Only 'private-domain' and 'local-data' names are allowed to have
- # these private addresses. No default.
- # private-address: 10.0.0.0/8
- # private-address: 172.16.0.0/12
- # private-address: 192.168.0.0/16
- # private-address: 192.254.0.0/16
- # private-address: fd00::/8
- # private-address: fe80::/10
-
- # Allow the domain (and its subdomains) to contain private addresses.
- # local-data statements are allowed to contain private addresses too.
- # private-domain: "example.com"
-
- # If nonzero, unwanted replies are not only reported in statistics,
- # but also a running total is kept per thread. If it reaches the
- # threshold, a warning is printed and a defensive action is taken,
- # the cache is cleared to flush potential poison out of it.
- # A suggested value is 10000000, the default is 0 (turned off).
- # unwanted-reply-threshold: 0
-
- # Do not query the following addresses. No DNS queries are sent there.
- # List one address per entry. List classless netblocks with /size,
- # do-not-query-address: 127.0.0.1/8
- # do-not-query-address: ::1
-
- # if yes, the above default do-not-query-address entries are present.
- # if no, localhost can be queried (for testing and debugging).
- # do-not-query-localhost: yes
-
- # module configuration of the server. A string with identifiers
- # separated by spaces. "iterator" or "validator iterator"
- module-config: "validator python iterator"
-
- # File with DLV trusted keys. Same format as trust-anchor-file.
- # There can be only one DLV configured, it is trusted from root down.
- # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key
- # dlv-anchor-file: "dlv.isc.org.key"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry.
- # Zone file format, with DS and DNSKEY entries.
- # trust-anchor-file: ""
-
- # Trusted key for validation. DS or DNSKEY. specify the RR on a
- # single line, surrounded by "". TTL is ignored. class is IN default.
- # (These examples are from August 2007 and may not be valid anymore).
- # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
- # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry. Like trust-anchor-file
- # but has a different file format. Format is BIND-9 style format,
- # the trusted-keys { name flag proto algo "key"; }; clauses are read.
- # trusted-keys-file: ""
-
- # Override the date for validation with a specific fixed date.
- # Do not set this unless you are debugging signature inception
- # and expiration. "" or "0" turns the feature off.
- # val-override-date: ""
-
- # The time to live for bogus data, rrsets and messages. This avoids
- # some of the revalidation, until the time interval expires. in secs.
- # val-bogus-ttl: 60
-
- # Should additional section of secure message also be kept clean of
- # unsecure data. Useful to shield the users of this validator from
- # potential bogus data in the additional section. All unsigned data
- # in the additional section is removed from secure messages.
- # val-clean-additional: yes
-
- # Turn permissive mode on to permit bogus messages. Thus, messages
- # for which security checks failed will be returned to clients,
- # instead of SERVFAIL. It still performs the security checks, which
- # result in interesting log files and possibly the AD bit in
- # replies if the message is found secure. The default is off.
- # val-permissive-mode: no
-
- # It is possible to configure NSEC3 maximum iteration counts per
- # keysize. Keep this table very short, as linear search is done.
- # A message with an NSEC3 with larger count is marked insecure.
- # List in ascending order the keysize and count values.
- # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
-
- # the amount of memory to use for the key cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # key-cache-size: 4m
-
- # the number of slabs to use for the key cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # key-cache-slabs: 4
-
- # the amount of memory to use for the negative cache (used for DLV).
- # plain value in bytes or you can append k, m or G. default is "1Mb".
- # neg-cache-size: 1m
-
- # a number of locally served zones can be configured.
- # local-zone: <zone> <type>
- # local-data: "<resource record string>"
- # o deny serves local data (if any), else, drops queries.
- # o refuse serves local data (if any), else, replies with error.
- # o static serves local data, else, nxdomain or nodata answer.
- # o transparent serves local data, else, resolves normally .
- # o redirect serves the zone data for any subdomain in the zone.
- # o nodefault can be used to normally resolve AS112 zones.
- #
- # defaults are localhost address, reverse for 127.0.0.1 and ::1
- # and nxdomain for AS112 zones. If you configure one of these zones
- # the default content is omitted, or you can omit it with 'nodefault'.
- #
- # If you configure local-data without specifying local-zone, by
- # default a transparent local-zone is created for the data.
- #
- # You can add locally served data with
- # local-zone: "local." static
- # local-data: "mycomputer.local. IN A 192.0.2.51"
- # local-data: 'mytext.local TXT "content of text record"'
- #
- # You can override certain queries with
- # local-data: "adserver.example.com A 127.0.0.1"
- #
- # You can redirect a domain to a fixed address with
- # (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
- # local-zone: "example.com" redirect
- # local-data: "example.com A 192.0.2.3"
- #
- # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
- # You can also add PTR records using local-data directly, but then
- # you need to do the reverse notation yourself.
- # local-data-ptr: "192.0.2.3 www.example.com"
+ module-config: "validator python iterator"
# Python config section
python:
- # Script file to load
- python-script: "./examples/calc.py"
-
-# Remote control config section.
-remote-control:
- # Enable remote control with unbound-control(8) here.
- # set up the keys and certificates with unbound-control-setup.
- # control-enable: no
-
- # what interfaces are listened to for remote control.
- # give 0.0.0.0 and ::0 to listen to all interfaces.
- # control-interface: 127.0.0.1
- # control-interface: ::1
-
- # port number for remote control operations.
- # control-port: 953
-
- # unbound server key file.
- # server-key-file: "/usr/local/etc/unbound/unbound_server.key"
-
- # unbound server certificate file.
- # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem"
-
- # unbound-control key file.
- # control-key-file: "/usr/local/etc/unbound/unbound_control.key"
-
- # unbound-control certificate file.
- # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem"
-
-# Stub zones.
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of nameservers. list zero or more
-# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
-# the list is treated as priming hints (default is no).
-# stub-zone:
-# name: "example.com"
-# stub-addr: 192.0.2.68
-# stub-prime: "no"
-# stub-zone:
-# name: "example.org"
-# stub-host: ns.example.com.
+ # Script file to load
+ python-script: "./examples/calc.py"
-# Forward zones
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of servers. These servers have to handle
-# recursion to other nameservers. List zero or more nameservers by hostname
-# or by ipaddress. Use an entry with name "." to forward all queries.
-# forward-zone:
-# name: "example.com"
-# forward-addr: 192.0.2.68
-# forward-addr: 192.0.2.73@5355 # forward to port 5355.
-# forward-zone:
-# name: "example.org"
-# forward-host: fwd.example.com
-#
-# Example configuration file.
-#
-# See unbound.conf(5) man page.
-#
-# this is a comment.
-
-#Use this to include other text into the file.
-#include: "otherfile.conf"
-
-# The server clause sets the main parameters.
+# Example configuration file for dict.py
server:
- # whitespace is not necessary, but looks cleaner.
-
- # verbosity number, 0 is least verbose. 1 is default.
verbosity: 1
-
- # print statistics to the log (for every thread) every N seconds.
- # Set to "" or 0 to disable. Default is disabled.
- # statistics-interval: 0
-
- # enable cumulative statistics, without clearing them after printing.
- # statistics-cumulative: no
-
- # enable extended statistics (query types, answer codes, status)
- # printed from unbound-control. default off, because of speed.
- # extended-statistics: no
-
- # number of threads to create. 1 disables threading.
- # num-threads: 1
-
- # specify the interfaces to answer queries from by ip-address.
- # The default is to listen to localhost (127.0.0.1 and ::1).
- # specify 0.0.0.0 and ::0 to bind to all available interfaces.
- # specify every interface on a new 'interface:' labelled line.
- # The listen interfaces are not changed on reload, only on restart.
interface: 0.0.0.0
- # interface: 192.0.2.154
- # interface: 2001:DB8::5
-
- # enable this feature to copy the source address of queries to reply.
- # Socket options are not supported on all platforms. experimental.
- # interface-automatic: no
-
- # port to answer queries from
- # port: 53
-
- # specify the interfaces to send outgoing queries to authoritative
- # server from by ip-address. If none, the default (all) interface
- # is used. Specify every interface on a 'outgoing-interface:' line.
- # outgoing-interface: 192.0.2.153
- # outgoing-interface: 2001:DB8::5
- # outgoing-interface: 2001:DB8::6
-
- # number of ports to allocate per thread, determines the size of the
- # port range that can be open simultaneously.
- # outgoing-range: 256
-
- # permit unbound to use this port number or port range for
- # making outgoing queries, using an outgoing interface.
- # outgoing-port-permit: 32768
-
- # deny unbound the use this of port number or port range for
- # making outgoing queries, using an outgoing interface.
- # Use this to make sure unbound does not grab a UDP port that some
- # other server on this computer needs. The default is to avoid
- # IANA-assigned port numbers.
- # outgoing-port-avoid: "3200-3208"
-
- # number of outgoing simultaneous tcp buffers to hold per thread.
- # outgoing-num-tcp: 10
-
- # number of incoming simultaneous tcp buffers to hold per thread.
- # incoming-num-tcp: 10
-
- # buffer size for handling DNS data. No messages larger than this
- # size can be sent or received, by UDP or TCP. In bytes.
- # msg-buffer-size: 65552
-
- # the amount of memory to use for the message cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # msg-cache-size: 4m
-
- # the number of slabs to use for the message cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # msg-cache-slabs: 4
-
- # the number of queries that a thread gets to service.
- # num-queries-per-thread: 1024
-
- # if very busy, 50% queries run to completion, 50% get timeout in msec
- # jostle-timeout: 200
-
- # the amount of memory to use for the RRset cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # rrset-cache-size: 4m
-
- # the number of slabs to use for the RRset cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # rrset-cache-slabs: 4
-
- # the time to live (TTL) value cap for RRsets and messages in the
- # cache. Items are not cached for longer. In seconds.
- # cache-max-ttl: 86400
-
- # the time to live (TTL) value for cached roundtrip times and
- # EDNS version information for hosts. In seconds.
- # infra-host-ttl: 900
-
- # the time to live (TTL) value for cached lame delegations. In sec.
- # infra-lame-ttl: 900
-
- # the number of slabs to use for the Infrastructure cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # infra-cache-slabs: 4
-
- # the maximum number of hosts that are cached (roundtrip times, EDNS).
- # infra-cache-numhosts: 10000
-
- # the maximum size of the lame zones cached per host. in bytes.
- # infra-cache-lame-size: 10k
-
- # Enable IPv4, "yes" or "no".
- # do-ip4: yes
-
- # Enable IPv6, "yes" or "no".
- # do-ip6: yes
-
- # Enable UDP, "yes" or "no".
- # do-udp: yes
-
- # Enable TCP, "yes" or "no".
- # do-tcp: yes
-
- # Detach from the terminal, run in background, "yes" or "no".
do-daemonize: no
-
- # control which clients are allowed to make (recursive) queries
- # to this server. Specify classless netblocks with /size and action.
- # By default everything is refused, except for localhost.
- # Choose deny (drop message), refuse (polite error reply),
- # allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
access-control: 0.0.0.0/0 allow
- # access-control: 127.0.0.0/8 allow
- # access-control: ::0/0 refuse
- # access-control: ::1 allow
- # access-control: ::ffff:127.0.0.1 allow
-
- # if given, a chroot(2) is done to the given directory.
- # i.e. you can chroot to the working directory, for example,
- # for extra security, but make sure all files are in that directory.
- #
- # If chroot is enabled, you should pass the configfile (from the
- # commandline) as a full path from the original root. After the
- # chroot has been performed the now defunct portion of the config
- # file path is removed to be able to reread the config after a reload.
- #
- # All other file paths (working dir, logfile, roothints, and
- # key files) can be specified in several ways:
- # o as an absolute path relative to the new root.
- # o as a relative path to the working directory.
- # o as an absolute path relative to the original root.
- # In the last case the path is adjusted to remove the unused portion.
- #
- # The pid file can be absolute and outside of the chroot, it is
- # written just prior to performing the chroot and dropping permissions.
- #
- # Additionally, unbound may need to access /dev/random (for entropy).
- # How to do this is specific to your OS.
- #
- # If you give "" no chroot is performed. The path must not end in a /.
- chroot: ""
-
- # if given, user privileges are dropped (after binding port),
- # and the given username is assumed. Default is user "unbound".
- # If you give "" no privileges are dropped.
+ chroot: ""
username: ""
-
- # the working directory. The relative files in this config are
- # relative to this directory. If you give "" the working directory
- # is not changed.
directory: ""
-
- # the log file, "" means log to stderr.
- # Use of this option sets use-syslog to "no".
logfile: ""
-
- # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
- # log to, with identity "unbound". If yes, it overrides the logfile.
- # use-syslog: yes
-
- # the pid file. Can be an absolute path outside of chroot/work dir.
pidfile: "unbound.pid"
-
- # file to read root hints from.
- # get one from ftp://FTP.INTERNIC.NET/domain/named.cache
- # root-hints: ""
-
- # enable to not answer id.server and hostname.bind queries.
- # hide-identity: no
-
- # enable to not answer version.server and version.bind queries.
- # hide-version: no
-
- # the identity to report. Leave "" or default to return hostname.
- # identity: ""
-
- # the version to report. Leave "" or default to return package version.
- # version: ""
-
- # the target fetch policy.
- # series of integers describing the policy per dependency depth.
- # The number of values in the list determines the maximum dependency
- # depth the recursor will pursue before giving up. Each integer means:
- # -1 : fetch all targets opportunistically,
- # 0: fetch on demand,
- # positive value: fetch that many targets opportunistically.
- # Enclose the list of numbers between quotes ("").
- # target-fetch-policy: "3 2 1 0 0"
-
- # Harden against very small EDNS buffer sizes.
- # harden-short-bufsize: no
-
- # Harden against unseemly large queries.
- # harden-large-queries: no
-
- # Harden against out of zone rrsets, to avoid spoofing attempts.
- # harden-glue: yes
-
- # Harden against receiving dnssec-stripped data. If you turn it
- # off, failing to validate dnskey data for a trustanchor will
- # trigger insecure mode for that zone (like without a trustanchor).
- # Default on, which insists on dnssec data for trust-anchored zones.
- # harden-dnssec-stripped: yes
-
- # Harden the referral path by performing additional queries for
- # infrastructure data. Validates the replies (if possible).
- # Default off, because the lookups burden the server. Experimental
- # implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
- # harden-referral-path: no
-
- # Use 0x20-encoded random bits in the query to foil spoof attempts.
- # This feature is an experimental implementation of draft dns-0x20.
- # use-caps-for-id: no
-
- # Enforce privacy of these addresses. Strips them away from answers.
- # It may cause DNSSEC validation to additionally mark it as bogus.
- # Protects against 'DNS Rebinding' (uses browser as network proxy).
- # Only 'private-domain' and 'local-data' names are allowed to have
- # these private addresses. No default.
- # private-address: 10.0.0.0/8
- # private-address: 172.16.0.0/12
- # private-address: 192.168.0.0/16
- # private-address: 192.254.0.0/16
- # private-address: fd00::/8
- # private-address: fe80::/10
-
- # Allow the domain (and its subdomains) to contain private addresses.
- # local-data statements are allowed to contain private addresses too.
- # private-domain: "example.com"
-
- # If nonzero, unwanted replies are not only reported in statistics,
- # but also a running total is kept per thread. If it reaches the
- # threshold, a warning is printed and a defensive action is taken,
- # the cache is cleared to flush potential poison out of it.
- # A suggested value is 10000000, the default is 0 (turned off).
- # unwanted-reply-threshold: 0
-
- # Do not query the following addresses. No DNS queries are sent there.
- # List one address per entry. List classless netblocks with /size,
- # do-not-query-address: 127.0.0.1/8
- # do-not-query-address: ::1
-
- # if yes, the above default do-not-query-address entries are present.
- # if no, localhost can be queried (for testing and debugging).
- # do-not-query-localhost: yes
-
- # module configuration of the server. A string with identifiers
- # separated by spaces. "iterator" or "validator iterator"
- module-config: "validator python iterator"
-
- # File with DLV trusted keys. Same format as trust-anchor-file.
- # There can be only one DLV configured, it is trusted from root down.
- # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key
- # dlv-anchor-file: "dlv.isc.org.key"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry.
- # Zone file format, with DS and DNSKEY entries.
- # trust-anchor-file: ""
-
- # Trusted key for validation. DS or DNSKEY. specify the RR on a
- # single line, surrounded by "". TTL is ignored. class is IN default.
- # (These examples are from August 2007 and may not be valid anymore).
- # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
- # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry. Like trust-anchor-file
- # but has a different file format. Format is BIND-9 style format,
- # the trusted-keys { name flag proto algo "key"; }; clauses are read.
- # trusted-keys-file: ""
-
- # Override the date for validation with a specific fixed date.
- # Do not set this unless you are debugging signature inception
- # and expiration. "" or "0" turns the feature off.
- # val-override-date: ""
-
- # The time to live for bogus data, rrsets and messages. This avoids
- # some of the revalidation, until the time interval expires. in secs.
- # val-bogus-ttl: 60
-
- # Should additional section of secure message also be kept clean of
- # unsecure data. Useful to shield the users of this validator from
- # potential bogus data in the additional section. All unsigned data
- # in the additional section is removed from secure messages.
- # val-clean-additional: yes
-
- # Turn permissive mode on to permit bogus messages. Thus, messages
- # for which security checks failed will be returned to clients,
- # instead of SERVFAIL. It still performs the security checks, which
- # result in interesting log files and possibly the AD bit in
- # replies if the message is found secure. The default is off.
- # val-permissive-mode: no
-
- # It is possible to configure NSEC3 maximum iteration counts per
- # keysize. Keep this table very short, as linear search is done.
- # A message with an NSEC3 with larger count is marked insecure.
- # List in ascending order the keysize and count values.
- # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
-
- # the amount of memory to use for the key cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # key-cache-size: 4m
-
- # the number of slabs to use for the key cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # key-cache-slabs: 4
-
- # the amount of memory to use for the negative cache (used for DLV).
- # plain value in bytes or you can append k, m or G. default is "1Mb".
- # neg-cache-size: 1m
-
- # a number of locally served zones can be configured.
- # local-zone: <zone> <type>
- # local-data: "<resource record string>"
- # o deny serves local data (if any), else, drops queries.
- # o refuse serves local data (if any), else, replies with error.
- # o static serves local data, else, nxdomain or nodata answer.
- # o transparent serves local data, else, resolves normally .
- # o redirect serves the zone data for any subdomain in the zone.
- # o nodefault can be used to normally resolve AS112 zones.
- #
- # defaults are localhost address, reverse for 127.0.0.1 and ::1
- # and nxdomain for AS112 zones. If you configure one of these zones
- # the default content is omitted, or you can omit it with 'nodefault'.
- #
- # If you configure local-data without specifying local-zone, by
- # default a transparent local-zone is created for the data.
- #
- # You can add locally served data with
- # local-zone: "local." static
- # local-data: "mycomputer.local. IN A 192.0.2.51"
- # local-data: 'mytext.local TXT "content of text record"'
- #
- # You can override certain queries with
- # local-data: "adserver.example.com A 127.0.0.1"
- #
- # You can redirect a domain to a fixed address with
- # (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
- # local-zone: "example.com" redirect
- # local-data: "example.com A 192.0.2.3"
- #
- # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
- # You can also add PTR records using local-data directly, but then
- # you need to do the reverse notation yourself.
- # local-data-ptr: "192.0.2.3 www.example.com"
+ module-config: "validator python iterator"
# Python config section
python:
- # Script file to load
- python-script: "./examples/dict.py"
-
-# Remote control config section.
-remote-control:
- # Enable remote control with unbound-control(8) here.
- # set up the keys and certificates with unbound-control-setup.
- # control-enable: no
-
- # what interfaces are listened to for remote control.
- # give 0.0.0.0 and ::0 to listen to all interfaces.
- # control-interface: 127.0.0.1
- # control-interface: ::1
-
- # port number for remote control operations.
- # control-port: 953
-
- # unbound server key file.
- # server-key-file: "/usr/local/etc/unbound/unbound_server.key"
-
- # unbound server certificate file.
- # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem"
-
- # unbound-control key file.
- # control-key-file: "/usr/local/etc/unbound/unbound_control.key"
-
- # unbound-control certificate file.
- # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem"
-
-# Stub zones.
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of nameservers. list zero or more
-# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
-# the list is treated as priming hints (default is no).
-# stub-zone:
-# name: "example.com"
-# stub-addr: 192.0.2.68
-# stub-prime: "no"
-# stub-zone:
-# name: "example.org"
-# stub-host: ns.example.com.
+ # Script file to load
+ python-script: "./examples/dict.py"
-# Forward zones
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of servers. These servers have to handle
-# recursion to other nameservers. List zero or more nameservers by hostname
-# or by ipaddress. Use an entry with name "." to forward all queries.
-# forward-zone:
-# name: "example.com"
-# forward-addr: 192.0.2.68
-# forward-addr: 192.0.2.73@5355 # forward to port 5355.
-# forward-zone:
-# name: "example.org"
-# forward-host: fwd.example.com
-#
-# Example configuration file.
-#
-# See unbound.conf(5) man page.
-#
-# this is a comment.
-
-#Use this to include other text into the file.
-#include: "otherfile.conf"
-
-# The server clause sets the main parameters.
+# Example configuration file for log.py
server:
- # whitespace is not necessary, but looks cleaner.
-
- # verbosity number, 0 is least verbose. 1 is default.
verbosity: 1
-
- # print statistics to the log (for every thread) every N seconds.
- # Set to "" or 0 to disable. Default is disabled.
- # statistics-interval: 0
-
- # enable cumulative statistics, without clearing them after printing.
- # statistics-cumulative: no
-
- # enable extended statistics (query types, answer codes, status)
- # printed from unbound-control. default off, because of speed.
- # extended-statistics: no
-
- # number of threads to create. 1 disables threading.
- # num-threads: 1
-
- # specify the interfaces to answer queries from by ip-address.
- # The default is to listen to localhost (127.0.0.1 and ::1).
- # specify 0.0.0.0 and ::0 to bind to all available interfaces.
- # specify every interface on a new 'interface:' labelled line.
- # The listen interfaces are not changed on reload, only on restart.
interface: 0.0.0.0
- # interface: 192.0.2.154
- # interface: 2001:DB8::5
-
- # enable this feature to copy the source address of queries to reply.
- # Socket options are not supported on all platforms. experimental.
- # interface-automatic: no
-
- # port to answer queries from
- # port: 53
-
- # specify the interfaces to send outgoing queries to authoritative
- # server from by ip-address. If none, the default (all) interface
- # is used. Specify every interface on a 'outgoing-interface:' line.
- # outgoing-interface: 192.0.2.153
- # outgoing-interface: 2001:DB8::5
- # outgoing-interface: 2001:DB8::6
-
- # number of ports to allocate per thread, determines the size of the
- # port range that can be open simultaneously.
- # outgoing-range: 256
-
- # permit unbound to use this port number or port range for
- # making outgoing queries, using an outgoing interface.
- # outgoing-port-permit: 32768
-
- # deny unbound the use this of port number or port range for
- # making outgoing queries, using an outgoing interface.
- # Use this to make sure unbound does not grab a UDP port that some
- # other server on this computer needs. The default is to avoid
- # IANA-assigned port numbers.
- # outgoing-port-avoid: "3200-3208"
-
- # number of outgoing simultaneous tcp buffers to hold per thread.
- # outgoing-num-tcp: 10
-
- # number of incoming simultaneous tcp buffers to hold per thread.
- # incoming-num-tcp: 10
-
- # buffer size for handling DNS data. No messages larger than this
- # size can be sent or received, by UDP or TCP. In bytes.
- # msg-buffer-size: 65552
-
- # the amount of memory to use for the message cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # msg-cache-size: 4m
-
- # the number of slabs to use for the message cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # msg-cache-slabs: 4
-
- # the number of queries that a thread gets to service.
- # num-queries-per-thread: 1024
-
- # if very busy, 50% queries run to completion, 50% get timeout in msec
- # jostle-timeout: 200
-
- # the amount of memory to use for the RRset cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # rrset-cache-size: 4m
-
- # the number of slabs to use for the RRset cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # rrset-cache-slabs: 4
-
- # the time to live (TTL) value cap for RRsets and messages in the
- # cache. Items are not cached for longer. In seconds.
- # cache-max-ttl: 86400
-
- # the time to live (TTL) value for cached roundtrip times and
- # EDNS version information for hosts. In seconds.
- # infra-host-ttl: 900
-
- # the time to live (TTL) value for cached lame delegations. In sec.
- # infra-lame-ttl: 900
-
- # the number of slabs to use for the Infrastructure cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # infra-cache-slabs: 4
-
- # the maximum number of hosts that are cached (roundtrip times, EDNS).
- # infra-cache-numhosts: 10000
-
- # the maximum size of the lame zones cached per host. in bytes.
- # infra-cache-lame-size: 10k
-
- # Enable IPv4, "yes" or "no".
- # do-ip4: yes
-
- # Enable IPv6, "yes" or "no".
- # do-ip6: yes
-
- # Enable UDP, "yes" or "no".
- # do-udp: yes
-
- # Enable TCP, "yes" or "no".
- # do-tcp: yes
-
- # Detach from the terminal, run in background, "yes" or "no".
do-daemonize: no
-
- # control which clients are allowed to make (recursive) queries
- # to this server. Specify classless netblocks with /size and action.
- # By default everything is refused, except for localhost.
- # Choose deny (drop message), refuse (polite error reply),
- # allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
access-control: 0.0.0.0/0 allow
- # access-control: 127.0.0.0/8 allow
- # access-control: ::0/0 refuse
- # access-control: ::1 allow
- # access-control: ::ffff:127.0.0.1 allow
-
- # if given, a chroot(2) is done to the given directory.
- # i.e. you can chroot to the working directory, for example,
- # for extra security, but make sure all files are in that directory.
- #
- # If chroot is enabled, you should pass the configfile (from the
- # commandline) as a full path from the original root. After the
- # chroot has been performed the now defunct portion of the config
- # file path is removed to be able to reread the config after a reload.
- #
- # All other file paths (working dir, logfile, roothints, and
- # key files) can be specified in several ways:
- # o as an absolute path relative to the new root.
- # o as a relative path to the working directory.
- # o as an absolute path relative to the original root.
- # In the last case the path is adjusted to remove the unused portion.
- #
- # The pid file can be absolute and outside of the chroot, it is
- # written just prior to performing the chroot and dropping permissions.
- #
- # Additionally, unbound may need to access /dev/random (for entropy).
- # How to do this is specific to your OS.
- #
- # If you give "" no chroot is performed. The path must not end in a /.
- chroot: ""
-
- # if given, user privileges are dropped (after binding port),
- # and the given username is assumed. Default is user "unbound".
- # If you give "" no privileges are dropped.
+ chroot: ""
username: ""
-
- # the working directory. The relative files in this config are
- # relative to this directory. If you give "" the working directory
- # is not changed.
directory: ""
-
- # the log file, "" means log to stderr.
- # Use of this option sets use-syslog to "no".
logfile: ""
-
- # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
- # log to, with identity "unbound". If yes, it overrides the logfile.
- # use-syslog: yes
-
- # the pid file. Can be an absolute path outside of chroot/work dir.
pidfile: "unbound.pid"
-
- # file to read root hints from.
- # get one from ftp://FTP.INTERNIC.NET/domain/named.cache
- # root-hints: ""
-
- # enable to not answer id.server and hostname.bind queries.
- # hide-identity: no
-
- # enable to not answer version.server and version.bind queries.
- # hide-version: no
-
- # the identity to report. Leave "" or default to return hostname.
- # identity: ""
-
- # the version to report. Leave "" or default to return package version.
- # version: ""
-
- # the target fetch policy.
- # series of integers describing the policy per dependency depth.
- # The number of values in the list determines the maximum dependency
- # depth the recursor will pursue before giving up. Each integer means:
- # -1 : fetch all targets opportunistically,
- # 0: fetch on demand,
- # positive value: fetch that many targets opportunistically.
- # Enclose the list of numbers between quotes ("").
- # target-fetch-policy: "3 2 1 0 0"
-
- # Harden against very small EDNS buffer sizes.
- # harden-short-bufsize: no
-
- # Harden against unseemly large queries.
- # harden-large-queries: no
-
- # Harden against out of zone rrsets, to avoid spoofing attempts.
- # harden-glue: yes
-
- # Harden against receiving dnssec-stripped data. If you turn it
- # off, failing to validate dnskey data for a trustanchor will
- # trigger insecure mode for that zone (like without a trustanchor).
- # Default on, which insists on dnssec data for trust-anchored zones.
- # harden-dnssec-stripped: yes
-
- # Harden the referral path by performing additional queries for
- # infrastructure data. Validates the replies (if possible).
- # Default off, because the lookups burden the server. Experimental
- # implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
- # harden-referral-path: no
-
- # Use 0x20-encoded random bits in the query to foil spoof attempts.
- # This feature is an experimental implementation of draft dns-0x20.
- # use-caps-for-id: no
-
- # Enforce privacy of these addresses. Strips them away from answers.
- # It may cause DNSSEC validation to additionally mark it as bogus.
- # Protects against 'DNS Rebinding' (uses browser as network proxy).
- # Only 'private-domain' and 'local-data' names are allowed to have
- # these private addresses. No default.
- # private-address: 10.0.0.0/8
- # private-address: 172.16.0.0/12
- # private-address: 192.168.0.0/16
- # private-address: 192.254.0.0/16
- # private-address: fd00::/8
- # private-address: fe80::/10
-
- # Allow the domain (and its subdomains) to contain private addresses.
- # local-data statements are allowed to contain private addresses too.
- # private-domain: "example.com"
-
- # If nonzero, unwanted replies are not only reported in statistics,
- # but also a running total is kept per thread. If it reaches the
- # threshold, a warning is printed and a defensive action is taken,
- # the cache is cleared to flush potential poison out of it.
- # A suggested value is 10000000, the default is 0 (turned off).
- # unwanted-reply-threshold: 0
-
- # Do not query the following addresses. No DNS queries are sent there.
- # List one address per entry. List classless netblocks with /size,
- # do-not-query-address: 127.0.0.1/8
- # do-not-query-address: ::1
-
- # if yes, the above default do-not-query-address entries are present.
- # if no, localhost can be queried (for testing and debugging).
- # do-not-query-localhost: yes
-
- # module configuration of the server. A string with identifiers
- # separated by spaces. "iterator" or "validator iterator"
- module-config: "validator python iterator"
-
- # File with DLV trusted keys. Same format as trust-anchor-file.
- # There can be only one DLV configured, it is trusted from root down.
- # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key
- # dlv-anchor-file: "dlv.isc.org.key"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry.
- # Zone file format, with DS and DNSKEY entries.
- # trust-anchor-file: ""
-
- # Trusted key for validation. DS or DNSKEY. specify the RR on a
- # single line, surrounded by "". TTL is ignored. class is IN default.
- # (These examples are from August 2007 and may not be valid anymore).
- # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
- # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry. Like trust-anchor-file
- # but has a different file format. Format is BIND-9 style format,
- # the trusted-keys { name flag proto algo "key"; }; clauses are read.
- # trusted-keys-file: ""
-
- # Override the date for validation with a specific fixed date.
- # Do not set this unless you are debugging signature inception
- # and expiration. "" or "0" turns the feature off.
- # val-override-date: ""
-
- # The time to live for bogus data, rrsets and messages. This avoids
- # some of the revalidation, until the time interval expires. in secs.
- # val-bogus-ttl: 60
-
- # Should additional section of secure message also be kept clean of
- # unsecure data. Useful to shield the users of this validator from
- # potential bogus data in the additional section. All unsigned data
- # in the additional section is removed from secure messages.
- # val-clean-additional: yes
-
- # Turn permissive mode on to permit bogus messages. Thus, messages
- # for which security checks failed will be returned to clients,
- # instead of SERVFAIL. It still performs the security checks, which
- # result in interesting log files and possibly the AD bit in
- # replies if the message is found secure. The default is off.
- # val-permissive-mode: no
-
- # It is possible to configure NSEC3 maximum iteration counts per
- # keysize. Keep this table very short, as linear search is done.
- # A message with an NSEC3 with larger count is marked insecure.
- # List in ascending order the keysize and count values.
- # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
-
- # the amount of memory to use for the key cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # key-cache-size: 4m
-
- # the number of slabs to use for the key cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # key-cache-slabs: 4
-
- # the amount of memory to use for the negative cache (used for DLV).
- # plain value in bytes or you can append k, m or G. default is "1Mb".
- # neg-cache-size: 1m
-
- # a number of locally served zones can be configured.
- # local-zone: <zone> <type>
- # local-data: "<resource record string>"
- # o deny serves local data (if any), else, drops queries.
- # o refuse serves local data (if any), else, replies with error.
- # o static serves local data, else, nxdomain or nodata answer.
- # o transparent serves local data, else, resolves normally .
- # o redirect serves the zone data for any subdomain in the zone.
- # o nodefault can be used to normally resolve AS112 zones.
- #
- # defaults are localhost address, reverse for 127.0.0.1 and ::1
- # and nxdomain for AS112 zones. If you configure one of these zones
- # the default content is omitted, or you can omit it with 'nodefault'.
- #
- # If you configure local-data without specifying local-zone, by
- # default a transparent local-zone is created for the data.
- #
- # You can add locally served data with
- # local-zone: "local." static
- # local-data: "mycomputer.local. IN A 192.0.2.51"
- # local-data: 'mytext.local TXT "content of text record"'
- #
- # You can override certain queries with
- # local-data: "adserver.example.com A 127.0.0.1"
- #
- # You can redirect a domain to a fixed address with
- # (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
- # local-zone: "example.com" redirect
- # local-data: "example.com A 192.0.2.3"
- #
- # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
- # You can also add PTR records using local-data directly, but then
- # you need to do the reverse notation yourself.
- # local-data-ptr: "192.0.2.3 www.example.com"
+ module-config: "validator python iterator"
# Python config section
python:
- # Script file to load
- python-script: "./examples/log.py"
-
-# Remote control config section.
-remote-control:
- # Enable remote control with unbound-control(8) here.
- # set up the keys and certificates with unbound-control-setup.
- # control-enable: no
-
- # what interfaces are listened to for remote control.
- # give 0.0.0.0 and ::0 to listen to all interfaces.
- # control-interface: 127.0.0.1
- # control-interface: ::1
-
- # port number for remote control operations.
- # control-port: 953
-
- # unbound server key file.
- # server-key-file: "/usr/local/etc/unbound/unbound_server.key"
-
- # unbound server certificate file.
- # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem"
-
- # unbound-control key file.
- # control-key-file: "/usr/local/etc/unbound/unbound_control.key"
-
- # unbound-control certificate file.
- # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem"
-
-# Stub zones.
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of nameservers. list zero or more
-# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
-# the list is treated as priming hints (default is no).
-# stub-zone:
-# name: "example.com"
-# stub-addr: 192.0.2.68
-# stub-prime: "no"
-# stub-zone:
-# name: "example.org"
-# stub-host: ns.example.com.
-
-# Forward zones
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of servers. These servers have to handle
-# recursion to other nameservers. List zero or more nameservers by hostname
-# or by ipaddress. Use an entry with name "." to forward all queries.
-# forward-zone:
-# name: "example.com"
-# forward-addr: 192.0.2.68
-# forward-addr: 192.0.2.73@5355 # forward to port 5355.
-# forward-zone:
-# name: "example.org"
-# forward-host: fwd.example.com
+ # Script file to load
+ python-script: "./examples/log.py"
-#
-# Example configuration file.
-#
-# See unbound.conf(5) man page.
-#
-# this is a comment.
-
-#Use this to include other text into the file.
-#include: "otherfile.conf"
-
-# The server clause sets the main parameters.
+# Example configuration file for resgen.py
server:
- # whitespace is not necessary, but looks cleaner.
-
- # verbosity number, 0 is least verbose. 1 is default.
verbosity: 1
-
- # print statistics to the log (for every thread) every N seconds.
- # Set to "" or 0 to disable. Default is disabled.
- # statistics-interval: 0
-
- # enable cumulative statistics, without clearing them after printing.
- # statistics-cumulative: no
-
- # enable extended statistics (query types, answer codes, status)
- # printed from unbound-control. default off, because of speed.
- # extended-statistics: no
-
- # number of threads to create. 1 disables threading.
- # num-threads: 1
-
- # specify the interfaces to answer queries from by ip-address.
- # The default is to listen to localhost (127.0.0.1 and ::1).
- # specify 0.0.0.0 and ::0 to bind to all available interfaces.
- # specify every interface on a new 'interface:' labelled line.
- # The listen interfaces are not changed on reload, only on restart.
interface: 0.0.0.0
- # interface: 192.0.2.154
- # interface: 2001:DB8::5
-
- # enable this feature to copy the source address of queries to reply.
- # Socket options are not supported on all platforms. experimental.
- # interface-automatic: no
-
- # port to answer queries from
- # port: 53
-
- # specify the interfaces to send outgoing queries to authoritative
- # server from by ip-address. If none, the default (all) interface
- # is used. Specify every interface on a 'outgoing-interface:' line.
- # outgoing-interface: 192.0.2.153
- # outgoing-interface: 2001:DB8::5
- # outgoing-interface: 2001:DB8::6
-
- # number of ports to allocate per thread, determines the size of the
- # port range that can be open simultaneously.
- # outgoing-range: 256
-
- # permit unbound to use this port number or port range for
- # making outgoing queries, using an outgoing interface.
- # outgoing-port-permit: 32768
-
- # deny unbound the use this of port number or port range for
- # making outgoing queries, using an outgoing interface.
- # Use this to make sure unbound does not grab a UDP port that some
- # other server on this computer needs. The default is to avoid
- # IANA-assigned port numbers.
- # outgoing-port-avoid: "3200-3208"
-
- # number of outgoing simultaneous tcp buffers to hold per thread.
- # outgoing-num-tcp: 10
-
- # number of incoming simultaneous tcp buffers to hold per thread.
- # incoming-num-tcp: 10
-
- # buffer size for handling DNS data. No messages larger than this
- # size can be sent or received, by UDP or TCP. In bytes.
- # msg-buffer-size: 65552
-
- # the amount of memory to use for the message cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # msg-cache-size: 4m
-
- # the number of slabs to use for the message cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # msg-cache-slabs: 4
-
- # the number of queries that a thread gets to service.
- # num-queries-per-thread: 1024
-
- # if very busy, 50% queries run to completion, 50% get timeout in msec
- # jostle-timeout: 200
-
- # the amount of memory to use for the RRset cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # rrset-cache-size: 4m
-
- # the number of slabs to use for the RRset cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # rrset-cache-slabs: 4
-
- # the time to live (TTL) value cap for RRsets and messages in the
- # cache. Items are not cached for longer. In seconds.
- # cache-max-ttl: 86400
-
- # the time to live (TTL) value for cached roundtrip times and
- # EDNS version information for hosts. In seconds.
- # infra-host-ttl: 900
-
- # the time to live (TTL) value for cached lame delegations. In sec.
- # infra-lame-ttl: 900
-
- # the number of slabs to use for the Infrastructure cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # infra-cache-slabs: 4
-
- # the maximum number of hosts that are cached (roundtrip times, EDNS).
- # infra-cache-numhosts: 10000
-
- # the maximum size of the lame zones cached per host. in bytes.
- # infra-cache-lame-size: 10k
-
- # Enable IPv4, "yes" or "no".
- # do-ip4: yes
-
- # Enable IPv6, "yes" or "no".
- # do-ip6: yes
-
- # Enable UDP, "yes" or "no".
- # do-udp: yes
-
- # Enable TCP, "yes" or "no".
- # do-tcp: yes
-
- # Detach from the terminal, run in background, "yes" or "no".
do-daemonize: no
-
- # control which clients are allowed to make (recursive) queries
- # to this server. Specify classless netblocks with /size and action.
- # By default everything is refused, except for localhost.
- # Choose deny (drop message), refuse (polite error reply),
- # allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
access-control: 0.0.0.0/0 allow
- # access-control: 127.0.0.0/8 allow
- # access-control: ::0/0 refuse
- # access-control: ::1 allow
- # access-control: ::ffff:127.0.0.1 allow
-
- # if given, a chroot(2) is done to the given directory.
- # i.e. you can chroot to the working directory, for example,
- # for extra security, but make sure all files are in that directory.
- #
- # If chroot is enabled, you should pass the configfile (from the
- # commandline) as a full path from the original root. After the
- # chroot has been performed the now defunct portion of the config
- # file path is removed to be able to reread the config after a reload.
- #
- # All other file paths (working dir, logfile, roothints, and
- # key files) can be specified in several ways:
- # o as an absolute path relative to the new root.
- # o as a relative path to the working directory.
- # o as an absolute path relative to the original root.
- # In the last case the path is adjusted to remove the unused portion.
- #
- # The pid file can be absolute and outside of the chroot, it is
- # written just prior to performing the chroot and dropping permissions.
- #
- # Additionally, unbound may need to access /dev/random (for entropy).
- # How to do this is specific to your OS.
- #
- # If you give "" no chroot is performed. The path must not end in a /.
- chroot: ""
-
- # if given, user privileges are dropped (after binding port),
- # and the given username is assumed. Default is user "unbound".
- # If you give "" no privileges are dropped.
+ chroot: ""
username: ""
-
- # the working directory. The relative files in this config are
- # relative to this directory. If you give "" the working directory
- # is not changed.
directory: ""
-
- # the log file, "" means log to stderr.
- # Use of this option sets use-syslog to "no".
logfile: ""
-
- # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
- # log to, with identity "unbound". If yes, it overrides the logfile.
- # use-syslog: yes
-
- # the pid file. Can be an absolute path outside of chroot/work dir.
pidfile: "unbound.pid"
-
- # file to read root hints from.
- # get one from ftp://FTP.INTERNIC.NET/domain/named.cache
- # root-hints: ""
-
- # enable to not answer id.server and hostname.bind queries.
- # hide-identity: no
-
- # enable to not answer version.server and version.bind queries.
- # hide-version: no
-
- # the identity to report. Leave "" or default to return hostname.
- # identity: ""
-
- # the version to report. Leave "" or default to return package version.
- # version: ""
-
- # the target fetch policy.
- # series of integers describing the policy per dependency depth.
- # The number of values in the list determines the maximum dependency
- # depth the recursor will pursue before giving up. Each integer means:
- # -1 : fetch all targets opportunistically,
- # 0: fetch on demand,
- # positive value: fetch that many targets opportunistically.
- # Enclose the list of numbers between quotes ("").
- # target-fetch-policy: "3 2 1 0 0"
-
- # Harden against very small EDNS buffer sizes.
- # harden-short-bufsize: no
-
- # Harden against unseemly large queries.
- # harden-large-queries: no
-
- # Harden against out of zone rrsets, to avoid spoofing attempts.
- # harden-glue: yes
-
- # Harden against receiving dnssec-stripped data. If you turn it
- # off, failing to validate dnskey data for a trustanchor will
- # trigger insecure mode for that zone (like without a trustanchor).
- # Default on, which insists on dnssec data for trust-anchored zones.
- # harden-dnssec-stripped: yes
-
- # Harden the referral path by performing additional queries for
- # infrastructure data. Validates the replies (if possible).
- # Default off, because the lookups burden the server. Experimental
- # implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
- # harden-referral-path: no
-
- # Use 0x20-encoded random bits in the query to foil spoof attempts.
- # This feature is an experimental implementation of draft dns-0x20.
- # use-caps-for-id: no
-
- # Enforce privacy of these addresses. Strips them away from answers.
- # It may cause DNSSEC validation to additionally mark it as bogus.
- # Protects against 'DNS Rebinding' (uses browser as network proxy).
- # Only 'private-domain' and 'local-data' names are allowed to have
- # these private addresses. No default.
- # private-address: 10.0.0.0/8
- # private-address: 172.16.0.0/12
- # private-address: 192.168.0.0/16
- # private-address: 192.254.0.0/16
- # private-address: fd00::/8
- # private-address: fe80::/10
-
- # Allow the domain (and its subdomains) to contain private addresses.
- # local-data statements are allowed to contain private addresses too.
- # private-domain: "example.com"
-
- # If nonzero, unwanted replies are not only reported in statistics,
- # but also a running total is kept per thread. If it reaches the
- # threshold, a warning is printed and a defensive action is taken,
- # the cache is cleared to flush potential poison out of it.
- # A suggested value is 10000000, the default is 0 (turned off).
- # unwanted-reply-threshold: 0
-
- # Do not query the following addresses. No DNS queries are sent there.
- # List one address per entry. List classless netblocks with /size,
- # do-not-query-address: 127.0.0.1/8
- # do-not-query-address: ::1
-
- # if yes, the above default do-not-query-address entries are present.
- # if no, localhost can be queried (for testing and debugging).
- # do-not-query-localhost: yes
-
- # module configuration of the server. A string with identifiers
- # separated by spaces. "iterator" or "validator iterator"
- module-config: "validator python iterator"
-
- # File with DLV trusted keys. Same format as trust-anchor-file.
- # There can be only one DLV configured, it is trusted from root down.
- # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key
- # dlv-anchor-file: "dlv.isc.org.key"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry.
- # Zone file format, with DS and DNSKEY entries.
- # trust-anchor-file: ""
-
- # Trusted key for validation. DS or DNSKEY. specify the RR on a
- # single line, surrounded by "". TTL is ignored. class is IN default.
- # (These examples are from August 2007 and may not be valid anymore).
- # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
- # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry. Like trust-anchor-file
- # but has a different file format. Format is BIND-9 style format,
- # the trusted-keys { name flag proto algo "key"; }; clauses are read.
- # trusted-keys-file: ""
-
- # Override the date for validation with a specific fixed date.
- # Do not set this unless you are debugging signature inception
- # and expiration. "" or "0" turns the feature off.
- # val-override-date: ""
-
- # The time to live for bogus data, rrsets and messages. This avoids
- # some of the revalidation, until the time interval expires. in secs.
- # val-bogus-ttl: 60
-
- # Should additional section of secure message also be kept clean of
- # unsecure data. Useful to shield the users of this validator from
- # potential bogus data in the additional section. All unsigned data
- # in the additional section is removed from secure messages.
- # val-clean-additional: yes
-
- # Turn permissive mode on to permit bogus messages. Thus, messages
- # for which security checks failed will be returned to clients,
- # instead of SERVFAIL. It still performs the security checks, which
- # result in interesting log files and possibly the AD bit in
- # replies if the message is found secure. The default is off.
- # val-permissive-mode: no
-
- # It is possible to configure NSEC3 maximum iteration counts per
- # keysize. Keep this table very short, as linear search is done.
- # A message with an NSEC3 with larger count is marked insecure.
- # List in ascending order the keysize and count values.
- # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
-
- # the amount of memory to use for the key cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # key-cache-size: 4m
-
- # the number of slabs to use for the key cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # key-cache-slabs: 4
-
- # the amount of memory to use for the negative cache (used for DLV).
- # plain value in bytes or you can append k, m or G. default is "1Mb".
- # neg-cache-size: 1m
-
- # a number of locally served zones can be configured.
- # local-zone: <zone> <type>
- # local-data: "<resource record string>"
- # o deny serves local data (if any), else, drops queries.
- # o refuse serves local data (if any), else, replies with error.
- # o static serves local data, else, nxdomain or nodata answer.
- # o transparent serves local data, else, resolves normally .
- # o redirect serves the zone data for any subdomain in the zone.
- # o nodefault can be used to normally resolve AS112 zones.
- #
- # defaults are localhost address, reverse for 127.0.0.1 and ::1
- # and nxdomain for AS112 zones. If you configure one of these zones
- # the default content is omitted, or you can omit it with 'nodefault'.
- #
- # If you configure local-data without specifying local-zone, by
- # default a transparent local-zone is created for the data.
- #
- # You can add locally served data with
- # local-zone: "local." static
- # local-data: "mycomputer.local. IN A 192.0.2.51"
- # local-data: 'mytext.local TXT "content of text record"'
- #
- # You can override certain queries with
- # local-data: "adserver.example.com A 127.0.0.1"
- #
- # You can redirect a domain to a fixed address with
- # (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
- # local-zone: "example.com" redirect
- # local-data: "example.com A 192.0.2.3"
- #
- # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
- # You can also add PTR records using local-data directly, but then
- # you need to do the reverse notation yourself.
- # local-data-ptr: "192.0.2.3 www.example.com"
+ module-config: "validator python iterator"
# Python config section
python:
- # Script file to load
- python-script: "./examples/resgen.py"
-
-# Remote control config section.
-remote-control:
- # Enable remote control with unbound-control(8) here.
- # set up the keys and certificates with unbound-control-setup.
- # control-enable: no
-
- # what interfaces are listened to for remote control.
- # give 0.0.0.0 and ::0 to listen to all interfaces.
- # control-interface: 127.0.0.1
- # control-interface: ::1
-
- # port number for remote control operations.
- # control-port: 953
-
- # unbound server key file.
- # server-key-file: "/usr/local/etc/unbound/unbound_server.key"
-
- # unbound server certificate file.
- # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem"
-
- # unbound-control key file.
- # control-key-file: "/usr/local/etc/unbound/unbound_control.key"
-
- # unbound-control certificate file.
- # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem"
-
-# Stub zones.
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of nameservers. list zero or more
-# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
-# the list is treated as priming hints (default is no).
-# stub-zone:
-# name: "example.com"
-# stub-addr: 192.0.2.68
-# stub-prime: "no"
-# stub-zone:
-# name: "example.org"
-# stub-host: ns.example.com.
+ # Script file to load
+ python-script: "./examples/resgen.py"
-# Forward zones
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of servers. These servers have to handle
-# recursion to other nameservers. List zero or more nameservers by hostname
-# or by ipaddress. Use an entry with name "." to forward all queries.
-# forward-zone:
-# name: "example.com"
-# forward-addr: 192.0.2.68
-# forward-addr: 192.0.2.73@5355 # forward to port 5355.
-# forward-zone:
-# name: "example.org"
-# forward-host: fwd.example.com
-#
-# Example configuration file.
-#
-# See unbound.conf(5) man page.
-#
-# this is a comment.
-
-#Use this to include other text into the file.
-#include: "otherfile.conf"
-
-# The server clause sets the main parameters.
+# Example configuration file for resmod.py
server:
- # whitespace is not necessary, but looks cleaner.
-
- # verbosity number, 0 is least verbose. 1 is default.
verbosity: 1
-
- # print statistics to the log (for every thread) every N seconds.
- # Set to "" or 0 to disable. Default is disabled.
- # statistics-interval: 0
-
- # enable cumulative statistics, without clearing them after printing.
- # statistics-cumulative: no
-
- # enable extended statistics (query types, answer codes, status)
- # printed from unbound-control. default off, because of speed.
- # extended-statistics: no
-
- # number of threads to create. 1 disables threading.
- # num-threads: 1
-
- # specify the interfaces to answer queries from by ip-address.
- # The default is to listen to localhost (127.0.0.1 and ::1).
- # specify 0.0.0.0 and ::0 to bind to all available interfaces.
- # specify every interface on a new 'interface:' labelled line.
- # The listen interfaces are not changed on reload, only on restart.
interface: 0.0.0.0
- # interface: 192.0.2.154
- # interface: 2001:DB8::5
-
- # enable this feature to copy the source address of queries to reply.
- # Socket options are not supported on all platforms. experimental.
- # interface-automatic: no
-
- # port to answer queries from
- # port: 53
-
- # specify the interfaces to send outgoing queries to authoritative
- # server from by ip-address. If none, the default (all) interface
- # is used. Specify every interface on a 'outgoing-interface:' line.
- # outgoing-interface: 192.0.2.153
- # outgoing-interface: 2001:DB8::5
- # outgoing-interface: 2001:DB8::6
-
- # number of ports to allocate per thread, determines the size of the
- # port range that can be open simultaneously.
- # outgoing-range: 256
-
- # permit unbound to use this port number or port range for
- # making outgoing queries, using an outgoing interface.
- # outgoing-port-permit: 32768
-
- # deny unbound the use this of port number or port range for
- # making outgoing queries, using an outgoing interface.
- # Use this to make sure unbound does not grab a UDP port that some
- # other server on this computer needs. The default is to avoid
- # IANA-assigned port numbers.
- # outgoing-port-avoid: "3200-3208"
-
- # number of outgoing simultaneous tcp buffers to hold per thread.
- # outgoing-num-tcp: 10
-
- # number of incoming simultaneous tcp buffers to hold per thread.
- # incoming-num-tcp: 10
-
- # buffer size for handling DNS data. No messages larger than this
- # size can be sent or received, by UDP or TCP. In bytes.
- # msg-buffer-size: 65552
-
- # the amount of memory to use for the message cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # msg-cache-size: 4m
-
- # the number of slabs to use for the message cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # msg-cache-slabs: 4
-
- # the number of queries that a thread gets to service.
- # num-queries-per-thread: 1024
-
- # if very busy, 50% queries run to completion, 50% get timeout in msec
- # jostle-timeout: 200
-
- # the amount of memory to use for the RRset cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # rrset-cache-size: 4m
-
- # the number of slabs to use for the RRset cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # rrset-cache-slabs: 4
-
- # the time to live (TTL) value cap for RRsets and messages in the
- # cache. Items are not cached for longer. In seconds.
- # cache-max-ttl: 86400
-
- # the time to live (TTL) value for cached roundtrip times and
- # EDNS version information for hosts. In seconds.
- # infra-host-ttl: 900
-
- # the time to live (TTL) value for cached lame delegations. In sec.
- # infra-lame-ttl: 900
-
- # the number of slabs to use for the Infrastructure cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # infra-cache-slabs: 4
-
- # the maximum number of hosts that are cached (roundtrip times, EDNS).
- # infra-cache-numhosts: 10000
-
- # the maximum size of the lame zones cached per host. in bytes.
- # infra-cache-lame-size: 10k
-
- # Enable IPv4, "yes" or "no".
- # do-ip4: yes
-
- # Enable IPv6, "yes" or "no".
- # do-ip6: yes
-
- # Enable UDP, "yes" or "no".
- # do-udp: yes
-
- # Enable TCP, "yes" or "no".
- # do-tcp: yes
-
- # Detach from the terminal, run in background, "yes" or "no".
do-daemonize: no
-
- # control which clients are allowed to make (recursive) queries
- # to this server. Specify classless netblocks with /size and action.
- # By default everything is refused, except for localhost.
- # Choose deny (drop message), refuse (polite error reply),
- # allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
access-control: 0.0.0.0/0 allow
- # access-control: 127.0.0.0/8 allow
- # access-control: ::0/0 refuse
- # access-control: ::1 allow
- # access-control: ::ffff:127.0.0.1 allow
-
- # if given, a chroot(2) is done to the given directory.
- # i.e. you can chroot to the working directory, for example,
- # for extra security, but make sure all files are in that directory.
- #
- # If chroot is enabled, you should pass the configfile (from the
- # commandline) as a full path from the original root. After the
- # chroot has been performed the now defunct portion of the config
- # file path is removed to be able to reread the config after a reload.
- #
- # All other file paths (working dir, logfile, roothints, and
- # key files) can be specified in several ways:
- # o as an absolute path relative to the new root.
- # o as a relative path to the working directory.
- # o as an absolute path relative to the original root.
- # In the last case the path is adjusted to remove the unused portion.
- #
- # The pid file can be absolute and outside of the chroot, it is
- # written just prior to performing the chroot and dropping permissions.
- #
- # Additionally, unbound may need to access /dev/random (for entropy).
- # How to do this is specific to your OS.
- #
- # If you give "" no chroot is performed. The path must not end in a /.
- chroot: ""
-
- # if given, user privileges are dropped (after binding port),
- # and the given username is assumed. Default is user "unbound".
- # If you give "" no privileges are dropped.
+ chroot: ""
username: ""
-
- # the working directory. The relative files in this config are
- # relative to this directory. If you give "" the working directory
- # is not changed.
directory: ""
-
- # the log file, "" means log to stderr.
- # Use of this option sets use-syslog to "no".
logfile: ""
-
- # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
- # log to, with identity "unbound". If yes, it overrides the logfile.
- # use-syslog: yes
-
- # the pid file. Can be an absolute path outside of chroot/work dir.
pidfile: "unbound.pid"
-
- # file to read root hints from.
- # get one from ftp://FTP.INTERNIC.NET/domain/named.cache
- # root-hints: ""
-
- # enable to not answer id.server and hostname.bind queries.
- # hide-identity: no
-
- # enable to not answer version.server and version.bind queries.
- # hide-version: no
-
- # the identity to report. Leave "" or default to return hostname.
- # identity: ""
-
- # the version to report. Leave "" or default to return package version.
- # version: ""
-
- # the target fetch policy.
- # series of integers describing the policy per dependency depth.
- # The number of values in the list determines the maximum dependency
- # depth the recursor will pursue before giving up. Each integer means:
- # -1 : fetch all targets opportunistically,
- # 0: fetch on demand,
- # positive value: fetch that many targets opportunistically.
- # Enclose the list of numbers between quotes ("").
- # target-fetch-policy: "3 2 1 0 0"
-
- # Harden against very small EDNS buffer sizes.
- # harden-short-bufsize: no
-
- # Harden against unseemly large queries.
- # harden-large-queries: no
-
- # Harden against out of zone rrsets, to avoid spoofing attempts.
- # harden-glue: yes
-
- # Harden against receiving dnssec-stripped data. If you turn it
- # off, failing to validate dnskey data for a trustanchor will
- # trigger insecure mode for that zone (like without a trustanchor).
- # Default on, which insists on dnssec data for trust-anchored zones.
- # harden-dnssec-stripped: yes
-
- # Harden the referral path by performing additional queries for
- # infrastructure data. Validates the replies (if possible).
- # Default off, because the lookups burden the server. Experimental
- # implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
- # harden-referral-path: no
-
- # Use 0x20-encoded random bits in the query to foil spoof attempts.
- # This feature is an experimental implementation of draft dns-0x20.
- # use-caps-for-id: no
-
- # Enforce privacy of these addresses. Strips them away from answers.
- # It may cause DNSSEC validation to additionally mark it as bogus.
- # Protects against 'DNS Rebinding' (uses browser as network proxy).
- # Only 'private-domain' and 'local-data' names are allowed to have
- # these private addresses. No default.
- # private-address: 10.0.0.0/8
- # private-address: 172.16.0.0/12
- # private-address: 192.168.0.0/16
- # private-address: 192.254.0.0/16
- # private-address: fd00::/8
- # private-address: fe80::/10
-
- # Allow the domain (and its subdomains) to contain private addresses.
- # local-data statements are allowed to contain private addresses too.
- # private-domain: "example.com"
-
- # If nonzero, unwanted replies are not only reported in statistics,
- # but also a running total is kept per thread. If it reaches the
- # threshold, a warning is printed and a defensive action is taken,
- # the cache is cleared to flush potential poison out of it.
- # A suggested value is 10000000, the default is 0 (turned off).
- # unwanted-reply-threshold: 0
-
- # Do not query the following addresses. No DNS queries are sent there.
- # List one address per entry. List classless netblocks with /size,
- # do-not-query-address: 127.0.0.1/8
- # do-not-query-address: ::1
-
- # if yes, the above default do-not-query-address entries are present.
- # if no, localhost can be queried (for testing and debugging).
- # do-not-query-localhost: yes
-
- # module configuration of the server. A string with identifiers
- # separated by spaces. "iterator" or "validator iterator"
- #module-config: "python iterator"
- module-config: "validator python iterator"
-
- # File with DLV trusted keys. Same format as trust-anchor-file.
- # There can be only one DLV configured, it is trusted from root down.
- # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key
- # dlv-anchor-file: "dlv.isc.org.key"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry.
- # Zone file format, with DS and DNSKEY entries.
- # trust-anchor-file: ""
-
- # Trusted key for validation. DS or DNSKEY. specify the RR on a
- # single line, surrounded by "". TTL is ignored. class is IN default.
- # (These examples are from August 2007 and may not be valid anymore).
- # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
- # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
-
- # File with trusted keys for validation. Specify more than one file
- # with several entries, one file per entry. Like trust-anchor-file
- # but has a different file format. Format is BIND-9 style format,
- # the trusted-keys { name flag proto algo "key"; }; clauses are read.
- # trusted-keys-file: ""
-
- # Override the date for validation with a specific fixed date.
- # Do not set this unless you are debugging signature inception
- # and expiration. "" or "0" turns the feature off.
- # val-override-date: ""
-
- # The time to live for bogus data, rrsets and messages. This avoids
- # some of the revalidation, until the time interval expires. in secs.
- # val-bogus-ttl: 60
-
- # Should additional section of secure message also be kept clean of
- # unsecure data. Useful to shield the users of this validator from
- # potential bogus data in the additional section. All unsigned data
- # in the additional section is removed from secure messages.
- # val-clean-additional: yes
-
- # Turn permissive mode on to permit bogus messages. Thus, messages
- # for which security checks failed will be returned to clients,
- # instead of SERVFAIL. It still performs the security checks, which
- # result in interesting log files and possibly the AD bit in
- # replies if the message is found secure. The default is off.
- # val-permissive-mode: no
-
- # It is possible to configure NSEC3 maximum iteration counts per
- # keysize. Keep this table very short, as linear search is done.
- # A message with an NSEC3 with larger count is marked insecure.
- # List in ascending order the keysize and count values.
- # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
-
- # the amount of memory to use for the key cache.
- # plain value in bytes or you can append k, m or G. default is "4Mb".
- # key-cache-size: 4m
-
- # the number of slabs to use for the key cache.
- # the number of slabs must be a power of 2.
- # more slabs reduce lock contention, but fragment memory usage.
- # key-cache-slabs: 4
-
- # the amount of memory to use for the negative cache (used for DLV).
- # plain value in bytes or you can append k, m or G. default is "1Mb".
- # neg-cache-size: 1m
-
- # a number of locally served zones can be configured.
- # local-zone: <zone> <type>
- # local-data: "<resource record string>"
- # o deny serves local data (if any), else, drops queries.
- # o refuse serves local data (if any), else, replies with error.
- # o static serves local data, else, nxdomain or nodata answer.
- # o transparent serves local data, else, resolves normally .
- # o redirect serves the zone data for any subdomain in the zone.
- # o nodefault can be used to normally resolve AS112 zones.
- #
- # defaults are localhost address, reverse for 127.0.0.1 and ::1
- # and nxdomain for AS112 zones. If you configure one of these zones
- # the default content is omitted, or you can omit it with 'nodefault'.
- #
- # If you configure local-data without specifying local-zone, by
- # default a transparent local-zone is created for the data.
- #
- # You can add locally served data with
- # local-zone: "local." static
- # local-data: "mycomputer.local. IN A 192.0.2.51"
- # local-data: 'mytext.local TXT "content of text record"'
- #
- # You can override certain queries with
- # local-data: "adserver.example.com A 127.0.0.1"
- #
- # You can redirect a domain to a fixed address with
- # (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
- # local-zone: "example.com" redirect
- # local-data: "example.com A 192.0.2.3"
- #
- # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
- # You can also add PTR records using local-data directly, but then
- # you need to do the reverse notation yourself.
- # local-data-ptr: "192.0.2.3 www.example.com"
+ #module-config: "python iterator"
+ module-config: "validator python iterator"
# Python config section
python:
- # Script file to load
- python-script: "./examples/resmod.py"
-
-# Remote control config section.
-remote-control:
- # Enable remote control with unbound-control(8) here.
- # set up the keys and certificates with unbound-control-setup.
- # control-enable: no
-
- # what interfaces are listened to for remote control.
- # give 0.0.0.0 and ::0 to listen to all interfaces.
- # control-interface: 127.0.0.1
- # control-interface: ::1
-
- # port number for remote control operations.
- # control-port: 953
-
- # unbound server key file.
- # server-key-file: "/usr/local/etc/unbound/unbound_server.key"
-
- # unbound server certificate file.
- # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem"
-
- # unbound-control key file.
- # control-key-file: "/usr/local/etc/unbound/unbound_control.key"
-
- # unbound-control certificate file.
- # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem"
-
-# Stub zones.
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of nameservers. list zero or more
-# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
-# the list is treated as priming hints (default is no).
-# stub-zone:
-# name: "example.com"
-# stub-addr: 192.0.2.68
-# stub-prime: "no"
-# stub-zone:
-# name: "example.org"
-# stub-host: ns.example.com.
+ # Script file to load
+ python-script: "./examples/resmod.py"
-# Forward zones
-# Create entries like below, to make all queries for 'example.com' and
-# 'example.org' go to the given list of servers. These servers have to handle
-# recursion to other nameservers. List zero or more nameservers by hostname
-# or by ipaddress. Use an entry with name "." to forward all queries.
-# forward-zone:
-# name: "example.com"
-# forward-addr: 192.0.2.68
-# forward-addr: 192.0.2.73@5355 # forward to port 5355.
-# forward-zone:
-# name: "example.org"
-# forward-host: fwd.example.com
projects / thirdparty / unbound.git / commitdiff
