arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB

As the hdmi-qp controller recently get merged, we can enable the
HDMI0 display on this board now.

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20241028123503.384866-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
index a4946cdc3bb34ef7bc084f74ae0a4ac8424994df..610a610e56eecab80aec3084a5a215ce30b83b94 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-coolpi-cm5.dtsi"
 
 / {
@@ -22,6 +23,17 @@
                pwms = <&pwm2 0 25000 0>;
        };
 
+       hdmi-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi0_out_con>;
+                       };
+               };
+       };
+
        leds: leds {
                compatible = "gpio-leds";
 
@@ -101,6 +113,26 @@
        };
 };
 
+&hdmi0 {
+       status = "okay";
+};
+
+&hdmi0_in {
+       hdmi0_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi0>;
+       };
+};
+
+&hdmi0_out {
+       hdmi0_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&hdptxphy_hdmi0 {
+       status = "okay";
+};
+
 /* M.2 E-Key */
 &pcie2x1l1 {
        reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -214,3 +246,18 @@
 &usb_host1_ohci {
        status = "okay";
 };
+
+&vop {
+       status = "okay";
+};
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi0_in_vp0>;
+       };
+};