# OPTIONS
-*-a*
-*--all*
+*-a*, *--all*
Probe all modules. This option is enabled by default if no file names
are given in the command-line.
-*-A*
-*--quick*
+*-A*, *--quick*
This option scans to see if any modules are newer than the
*modules.dep* file before any work is done: if not, it silently exits
rather than regenerating the files.
-*-b* _basedir_
-*--basedir* _basedir_
+*-b* _basedir_, *--basedir* _basedir_
Override the base directory <BASEDIR> where modules are located.
If your modules are not currently in the (normal) directory
@MODULE_DIRECTORY@/_version_, but in a staging area, you can specify a
_/my/build/staging/dir@MODULE_DIRECTORY@/$(uname -r)_ and generates
index files under that same directory.
-*-m* _moduledir_
-*--moduledir* _moduledir_
+*-m* _moduledir_, *--moduledir* _moduledir_
Override the module directory <MODULEDIR>, which defaults to
@MODULE_DIRECTORY@ prefix set at build time. This is useful when
building *modules.dep* file in _basedir_ for a system that uses a
_/tmp/build/kernel-modules/$(uname -r)_ and generates index files under
that same directory.
-*-o* _outdir_
-*--outdir* _outdir_
+*-o* _outdir_, *--outdir* _outdir_
Set the output directory where *depmod* will store any generated file.
_outdir_ serves as a root to that location, similar to how _basedir_ is
used. Also this setting takes precedence and if used together with
_@MODULE_DIRECTORY@/$(uname -r)_ and generates index files under
_/my/build/staging/dir@MODULE_DIRECTORY@/$(uname -r)_.
-*-C* _file_ _or_ _directory_
-*--config* _file_ _or_ _directory_
+*-C* _file_ _or_ _directory_, *--config* _file_ _or_ _directory_
This option overrides the default configuration files. See
*depmod.d*(5).
-*-e*
-*--errsyms*
+*-e*, *--errsyms*
When combined with the *-F* option, this reports any symbols which a
module needs which are not supplied by other modules or the kernel.
Normally, any symbols not provided by modules are assumed to be provided
assumption can break especially when additionally updated third party
drivers are not correctly installed or were built incorrectly.
-*-E* _Module.symvers_
-*--symvers* _Module.symvers_
+*-E* _Module.symvers_, *--symvers* _Module.symvers_
When combined with the *-e* option, this reports any symbol versions
supplied by modules that do not match with the symbol versions provided
by the kernel in its _Module.symvers_. This option is mutually
incompatible with *-F*.
-*-F* _System.map_
-*--filesyms* _System.map_
+*-F* _System.map_, *--filesyms* _System.map_
Supplied with the _System.map_ produced when the kernel was built, this
allows the *-e* option to report unresolved symbols. This option is
mutually incompatible with *-E*.
-*-h*
-*--help*
+*-h*, *--help*
Print the help message and exit.
-*-n*
-*--show*
-*--dry-run*
+*-n*, *--show*, *--dry-run*
This sends the resulting *modules.dep* and the various map files to
standard output rather than writing them into the module directory.
Some architectures prefix symbols with an extraneous character. This
specifies a prefix character (for example '\_') to ignore.
-*-v*
-*--verbose*
+*-v*, *--verbose*
In verbose mode, *depmod* will print (to stdout) all the symbols each
module depends on and the module's file name which provides that symbol.
-*-V*
-*--version*
+*-V*, *--version*
Show version of program and exit. See below for caveats when run on
older kernels.
# OPTIONS
-*-f*
-*--force*
+*-f*, *--force*
This option can be extremely dangerous: it tells the kernel to ignore
the module version and vermagic fields when loading. With this option,
you can load modules build locally or by third parties, although this
can lead to memory corruption, system crashes and data loss.
-*-s*
-*--syslog*
+*-s*, *--syslog*
Send errors to syslog instead of standard error.
-*-v*
-*--verbose*
+*-v*, *--verbose*
Print messages about what the program is doing. Usually *insmod* prints
messages only if something goes wrong.
-*-V*
-*--version*
+*-V*, *--version*
Show version of program and exit.
-*-h*
-*--help*
+*-h*, *--help*
Print the help message and exit.
# COPYRIGHT
# OPTIONS
-*-V*
-*--version*
+*-V*, *--version*
Show the program version and exit.
-*-h*
-*--help*
+*-h*, *--help*
Show the help message.
# COMMANDS
# OPTIONS
-*-s*
-*--syslog*
+*-s*, *--syslog*
Send errors to syslog instead of standard error.
-*-v*
-*--verbose*
+*-v*, *--verbose*
Print messages about what the program is doing. Usually *lsmod* prints
messages only if something goes wrong.
-*-V*
-*--version*
+*-V*, *--version*
Show version of program and exit.
-*-h*
-*--help*
+*-h*, *--help*
Print the help message and exit.
# COPYRIGHT
# OPTIONS
-*-V*
-*--version*
+*-V*, *--version*
Print the *modinfo* version.
-*-F* _field_
-*--field* _field_
+*-F* _field_, *--field* _field_
Only print this _field_ value, one per line. This is most useful for
scripts. Field names are case-insensitive. Common fields (which may not
be in every module) include author, description, license, parm, depends,
and alias. There are often multiple parm, alias and depends fields. The
special _field_ filename lists the filename of the module.
-*-b* _basedir_
-*--basedir* _basedir_
+*-b* _basedir_, *--basedir* _basedir_
Root directory for modules, / by default.
*-k* _kernel_
modules in a new kernel for which you must make an initrd/initramfs
image prior to booting.
-*-0*
-*--null*
+*-0*, *--null*
Use the ASCII zero character to separate _field_ values, instead of a new
line. This is useful for scripts, since a new line can theoretically
appear inside a _field_.
-*-a* *--author*
-*-d* *--description*
-*-l* *--license*
-*-p* *--parameters*
-*-n* *--filename*
+*-a* *--author*, *-d* *--description*, *-l* *--license*, *-p* *--parameters*, *-n* *--filename*
These are shortcuts for the *--field* flag's author, description,
license, parm and filename arguments, to ease the transition from the
old modutils *modinfo*.
# OPTIONS
-*-a*
-*--all*
+*-a*, *--all*
Insert all module names on the command line.
-*-b*
-*--use-blacklist*
+*-b*, *--use-blacklist*
This option causes *modprobe* to apply the *blacklist* commands in the
configuration files (if any) to module names as well. It is usually used
by *udev*(7).
-*-C* _directory_
-*--config* _directory_
+*-C* _directory_, *--config* _directory_
This option overrides the default configuration directory. See
*modprobe.d*(5).
This option is passed through *install* or *remove* commands to other
*modprobe* commands in the MODPROBE_OPTIONS environment variable.
-*-c*
-*--showconfig*
+*-c*, *--showconfig*
Dump out the effective configuration from the config directory and exit.
*--dump-modversions*
This option is commonly used by distributions in order to package up a
Linux kernel module using module versioning deps.
-*-d*
-*--dirname*
+*-d*, *--dirname*
Root directory for modules, / by default.
*--first-time*
This applies to any modules inserted: both the module (or alias) on the
command line and any modules on which it depends.
-*-f*
-*--force*
+*-f*, *--force*
Try to strip any versioning information from the module which might
otherwise stop it from loading: this is the same as using both
*--force-vermagic* and *--force-modversion*. Naturally, these checks are
This applies to any modules inserted: both the module (or alias) on the
command line and any modules on which it depends.
-*-i*
-*--ignore-install*
-*--ignore-remove*
+*-i*, *--ignore-install*, *--ignore-remove*
This option causes *modprobe* to ignore *install* and *remove* commands
in the configuration file (if any) for the module specified on the
command line (any dependent modules are still subject to commands set
the request was more specifically made with only one or other (and not
both) of *--ignore-install* or *--ignore-remove*. See *modprobe.d*(5).
-*-n*
-*--dry-run*
-*--show*
+*-n*, *--dry-run*, *--show*
This option does everything but actually insert or delete the modules
(or run the install or remove commands). Combined with *-v*, it is
useful for debugging problems. For historical reasons both *--dry-run*
and *--show* actually mean the same thing and are interchangeable.
-*-q*
-*--quiet*
+*-q*, *--quiet*
With this flag, *modprobe* won't print an error message if you try to
remove or insert a module it can't find (and isn't an alias or
*install*/*remove* command). However, it will still return with a non-zero
exit status. The kernel uses this to opportunistically probe for modules
which might exist using request_module.
-*-R*
-*--resolve-alias*
+*-R*, *--resolve-alias*
Print all module names matching an alias. This can be useful for
debugging module alias problems.
-***-r*
-*--remove*
+***-r*, *--remove*
This option causes *modprobe* to remove rather than insert a module. If
the modules it depends on are also unused, *modprobe* will try to remove
them too. Unlike insertion, more than one module can be specified on the
require it. Your distribution kernel may not have been built to support
removal of modules at all.
-*-w* _TIMEOUT_MSEC_
-*--wait* _TIMEOUT_MSEC_
+*-w* _TIMEOUT_MSEC_, *--wait* _TIMEOUT_MSEC_
This option causes *modprobe -r *to continue trying to remove a module
if it fails due to the module being busy, i.e. its refcount is not 0 at
the time the call is made. Modprobe tries to remove the module with an
incremental sleep time between each tentative up until the maximum wait
time in milliseconds passed in this option.
-*-S* _version_
-*--set-version* _version_
+*-S* _version_, *--set-version* _version_
Set the kernel version, rather than using *uname*(2) to decide on the
kernel version (which dictates where to find the modules).
that *modinfo*(8) can be used to extract dependencies of a module from the
module itself, but knows nothing of aliases or install commands.
-*-s*
-*--syslog*
+*-s*, *--syslog*
This option causes any error messages to go through the syslog mechanism
(as LOG_DAEMON with level LOG_NOTICE) rather than to standard error.
This is also automatically enabled when stderr is unavailable.
This option is passed through *install* or *remove* commands to other
*modprobe* commands in the MODPROBE_OPTIONS environment variable.
-*-V*
-*--version*
+*-V*, *--version*
Show version of program and exit.
-*-v*
-*--verbose*
+*-v*, *--verbose*
Print messages about what the program is doing. Usually *modprobe* only
prints messages if something goes wrong.
# OPTIONS
-*-f*
-*--force*
+*-f*, *--force*
This option can be extremely dangerous: it has no effect unless
CONFIG_MODULE_FORCE_UNLOAD was set when the kernel was compiled. With
this option, you can remove modules which are being used, or which are
not designed to be removed, or have been marked as unsafe (see *lsmod*(8)).
-*-s*
-*--syslog*
+*-s*, *--syslog*
Send errors to syslog instead of standard error.
-*-v*
-*--verbose*
+*-v*, *--verbose*
Print messages about what the program is doing. Usually *rmmod* prints
messages only if something goes wrong.
-*-V*
-*--version*
+*-V*, *--version*
Show version of program and exit.
-*-h*
-*--help*
+*-h*, *--help*
Print the help message and exit.
# COPYRIGHT
projects / thirdparty / kmod.git / commitdiff
