ranges;
compatible = "simple-bus";
- lpass@28100000 {
- compatible = "qcom,lpass-cpu";
- status = "disabled";
- clocks = <&lcc AHBIX_CLK>,
- <&lcc MI2S_OSR_CLK>,
- <&lcc MI2S_BIT_CLK>;
- clock-names = "ahbix-clk",
- "mi2s-osr-clk",
- "mi2s-bit-clk";
- interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "lpass-irq-lpaif";
- reg = <0x28100000 0x10000>;
- reg-names = "lpass-lpaif";
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <7>;
+ snps,rd_osr_lmt = <7>;
+ snps,blen = <16 0 0 0 0 0 0>;
+ };
+
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ rpm: rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+
+ qfprom: qfprom@700000 {
+ compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
+ reg = <0x00700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ speedbin_efuse: speedbin@c0 {
+ reg = <0xc0 0x4>;
+ };
+ tsens_calib: calib@400 {
+ reg = <0x400 0xb>;
+ };
+ tsens_calib_backup: calib_backup@410 {
+ reg = <0x410 0xb>;
+ };
};
qcom_pinmux: pinmux@800000 {
};
};
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-ipq8064", "syscon";
+ clocks = <&pxo_board>, <&cxo_board>;
+ clock-names = "pxo", "cxo";
+ reg = <0x00900000 0x4000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,ipq8064-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ sfpb_mutex: hwlock@1200600 {
+ compatible = "qcom,sfpb-mutex";
+ reg = <0x01200600 0x100>;
+
+ #hwlock-cells = <1>;
+ };
+
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
cpu-offset = <0x80000>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu_l2_aux";
+ };
+
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
};
+ saw0: regulator@2089000 {
+ compatible = "qcom,saw2";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
- adm_dma: dma-controller@18300000 {
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
+ saw1: regulator@2099000 {
+ compatible = "qcom,saw2";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- clock-names = "core", "iface";
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
- resets = <&gcc ADM0_RESET>,
- <&gcc ADM0_PBUS_RESET>,
- <&gcc ADM0_C0_RESET>,
- <&gcc ADM0_C1_RESET>,
- <&gcc ADM0_C2_RESET>;
- reset-names = "clk", "pbus", "c0", "c1", "c2";
- qcom,ee = <0>;
+ usb3_0: usb3@100f8800 {
+ compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_0_MASTER_RESET>;
+ reset-names = "master";
status = "disabled";
+
+ dwc3_0: dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
};
- saw0: regulator@2089000 {
- compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
+ hs_phy_0: phy@100f8800 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
};
- saw1: regulator@2099000 {
- compatible = "qcom,saw2";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
+ ss_phy_0: phy@100f8830 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb3_1: usb3@110f8800 {
+ compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_1_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_1: dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ hs_phy_1: phy@110f8800 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ss_phy_1: phy@110f8830 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ sdcc3bam: dma-controller@12182000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc1bam: dma-controller@12402000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x8000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba: amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sdcc3: mmc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc1: mmc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ };
};
gsbi1: gsbi@12440000 {
};
};
- gsbi5: gsbi@1a200000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <5>;
- reg = <0x1a200000 0x100>;
- clocks = <&gcc GSBI5_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- gsbi5_serial: serial@1a240000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x1a240000 0x1000>,
- <0x1a200000 0x1000>;
- interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@1a280000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x1a280000 0x1000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi@1a280000 {
- compatible = "qcom,spi-qup-v1.1.1";
- reg = <0x1a280000 0x1000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
gsbi6: gsbi@16500000 {
compatible = "qcom,gsbi-v1.0.0";
reg = <0x16500000 0x100>;
};
};
- rng@1a500000 {
- compatible = "qcom,prng";
- reg = <0x1a500000 0x200>;
- clocks = <&gcc PRNG_CLK>;
- clock-names = "core";
- };
+ adm_dma: dma-controller@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
- sata_phy: sata-phy@1b400000 {
- compatible = "qcom,ipq806x-sata-phy";
- reg = <0x1b400000 0x200>;
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
- #phy-cells = <0>;
status = "disabled";
};
- nand: nand-controller@1ac00000 {
- compatible = "qcom,ipq806x-nand";
- reg = <0x1ac00000 0x800>;
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- clocks = <&gcc EBI2_CLK>,
- <&gcc EBI2_AON_CLK>;
- clock-names = "core", "aon";
-
- dmas = <&adm_dma 3>;
- dma-names = "rxtx";
- qcom,cmd-crci = <15>;
- qcom,data-crci = <3>;
-
+ gsbi5: gsbi@1a200000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
+ reg = <0x1a200000 0x100>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges;
status = "disabled";
- };
- sata: sata@29000000 {
- compatible = "qcom,ipq806x-ahci", "generic-ahci";
- reg = <0x29000000 0x180>;
+ syscon-tcsr = <&tcsr>;
- interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ gsbi5_serial: serial@1a240000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a240000 0x1000>,
+ <0x1a200000 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
- clocks = <&gcc SFAB_SATA_S_H_CLK>,
- <&gcc SATA_H_CLK>,
- <&gcc SATA_A_CLK>,
- <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_face", "iface", "core",
- "rxoob", "pmalive";
+ i2c@1a280000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x1a280000 0x1000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
- assigned-clock-rates = <100000000>, <100000000>;
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- status = "disabled";
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x00500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
+ spi@1a280000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ reg = <0x1a280000 0x1000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- qfprom: qfprom@700000 {
- compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
- reg = <0x00700000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- speedbin_efuse: speedbin@c0 {
- reg = <0xc0 0x4>;
- };
- tsens_calib: calib@400 {
- reg = <0x400 0xb>;
- };
- tsens_calib_backup: calib_backup@410 {
- reg = <0x410 0xb>;
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064", "syscon";
- clocks = <&pxo_board>, <&cxo_board>;
- clock-names = "pxo", "cxo";
- reg = <0x00900000 0x4000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
-
- tsens: thermal-sensor@900000 {
- compatible = "qcom,ipq8064-tsens";
-
- nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
- #qcom,sensors = <11>;
- #thermal-sensor-cells = <1>;
- };
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
};
- rpm: rpm@108000 {
- compatible = "qcom,rpm-ipq8064";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
+ nand: nand-controller@1ac00000 {
+ compatible = "qcom,ipq806x-nand";
+ reg = <0x1ac00000 0x800>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "ack", "err", "wakeup";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
- clocks = <&gcc RPM_MSG_RAM_H_CLK>;
- clock-names = "ram";
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&pxo_board>;
- clock-names = "pxo";
- };
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
- tcsr: syscon@1a400000 {
- compatible = "qcom,tcsr-ipq8064", "syscon";
- reg = <0x1a400000 0x100>;
+ status = "disabled";
};
- l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
- clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
- clock-names = "pll8_vote", "pxo";
- clock-output-names = "acpu_l2_aux";
- };
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
- lcc: clock-controller@28000000 {
- compatible = "qcom,lcc-ipq8064";
- reg = <0x28000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ status = "disabled";
};
pcie0: pci@1b500000 {
perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
};
- nss_common: syscon@03000000 {
- compatible = "syscon";
- reg = <0x03000000 0x0000FFFF>;
- };
-
qsgmii_csr: syscon@1bb00000 {
compatible = "syscon";
reg = <0x1bb00000 0x000001FF>;
};
- stmmac_axi_setup: stmmac-axi-config {
- snps,wr_osr_lmt = <7>;
- snps,rd_osr_lmt = <7>;
- snps,blen = <16 0 0 0 0 0 0>;
+ lcc: clock-controller@28000000 {
+ compatible = "qcom,lcc-ipq8064";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ lpass@28100000 {
+ compatible = "qcom,lpass-cpu";
+ status = "disabled";
+ clocks = <&lcc AHBIX_CLK>,
+ <&lcc MI2S_OSR_CLK>,
+ <&lcc MI2S_BIT_CLK>;
+ clock-names = "ahbix-clk",
+ "mi2s-osr-clk",
+ "mi2s-bit-clk";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x28100000 0x10000>;
+ reg-names = "lpass-lpaif";
+ };
+
+ sata: sata@29000000 {
+ compatible = "qcom,ipq806x-ahci", "generic-ahci";
+ reg = <0x29000000 0x180>;
+
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_face", "iface", "core",
+ "rxoob", "pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ status = "disabled";
};
gmac0: ethernet@37000000 {
status = "disabled";
};
-
- hs_phy_0: phy@100f8800 {
- compatible = "qcom,ipq806x-usb-phy-hs";
- reg = <0x100f8800 0x30>;
- clocks = <&gcc USB30_0_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_0: phy@100f8830 {
- compatible = "qcom,ipq806x-usb-phy-ss";
- reg = <0x100f8830 0x30>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb3_0: usb3@100f8800 {
- compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x100f8800 0x8000>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "core";
-
- ranges;
-
- resets = <&gcc USB30_0_MASTER_RESET>;
- reset-names = "master";
-
- status = "disabled";
-
- dwc3_0: dwc3@10000000 {
- compatible = "snps,dwc3";
- reg = <0x10000000 0xcd00>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hs_phy_0>, <&ss_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- hs_phy_1: phy@110f8800 {
- compatible = "qcom,ipq806x-usb-phy-hs";
- reg = <0x110f8800 0x30>;
- clocks = <&gcc USB30_1_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_1: phy@110f8830 {
- compatible = "qcom,ipq806x-usb-phy-ss";
- reg = <0x110f8830 0x30>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb3_1: usb3@110f8800 {
- compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x110f8800 0x8000>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "core";
-
- ranges;
-
- resets = <&gcc USB30_1_MASTER_RESET>;
- reset-names = "master";
-
- status = "disabled";
-
- dwc3_1: dwc3@11000000 {
- compatible = "snps,dwc3";
- reg = <0x11000000 0xcd00>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hs_phy_1>, <&ss_phy_1>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- sdcc1bam: dma-controller@12402000 {
- compatible = "qcom,bam-v1.3.0";
- reg = <0x12402000 0x8000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc SDC1_H_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- sdcc3bam: dma-controller@12182000 {
- compatible = "qcom,bam-v1.3.0";
- reg = <0x12182000 0x8000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc SDC3_H_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- amba: amba {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sdcc1: mmc@12400000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x2000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
- non-removable;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- vmmc-supply = <&vsdcc_fixed>;
- dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
- dma-names = "tx", "rx";
- };
-
- sdcc3: mmc@12180000 {
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x2000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <192000000>;
- sd-uhs-sdr104;
- sd-uhs-ddr50;
- vqmmc-supply = <&vsdcc_fixed>;
- dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
- dma-names = "tx", "rx";
- };
- };
-
- sfpb_mutex: hwlock@1200600 {
- compatible = "qcom,sfpb-mutex";
- reg = <0x01200600 0x100>;
-
- #hwlock-cells = <1>;
- };
};
};
projects / thirdparty / linux.git / commitdiff
