ARC: DTB: [scripted] fix node name and address spelling

1. Remove "0x" prefix from unit-address of node names
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts*
sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

Inspired by [1] and the like.

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/

Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi
index 02410b2114334466572c05e651b6227b02e415f0..c0bcd97522bbfcfa96b0f9e0fa992d104df474f7 100644 (file)
--- a/arch/arc/boot/dts/abilis_tb100.dtsi
+++ b/arch/arc/boot/dts/abilis_tb100.dtsi
@@ -38,7 +38,7 @@
                        clock-div = <6>;
                };
 
-               iomux: iomux@FF10601c {
+               iomux: iomux@ff10601c {
                        /* Port 1 */
                        pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
                                abilis,function = "mis0";
@@ -162,182 +162,182 @@
                        };
                };
 
-               gpioa: gpio@FF140000 {
+               gpioa: gpio@ff140000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF140000 0x1000>;
+                       reg = <0xff140000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioa";
                };
-               gpiob: gpio@FF141000 {
+               gpiob: gpio@ff141000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF141000 0x1000>;
+                       reg = <0xff141000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiob";
                };
-               gpioc: gpio@FF142000 {
+               gpioc: gpio@ff142000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF142000 0x1000>;
+                       reg = <0xff142000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioc";
                };
-               gpiod: gpio@FF143000 {
+               gpiod: gpio@ff143000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF143000 0x1000>;
+                       reg = <0xff143000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiod";
                };
-               gpioe: gpio@FF144000 {
+               gpioe: gpio@ff144000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF144000 0x1000>;
+                       reg = <0xff144000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioe";
                };
-               gpiof: gpio@FF145000 {
+               gpiof: gpio@ff145000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF145000 0x1000>;
+                       reg = <0xff145000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiof";
                };
-               gpiog: gpio@FF146000 {
+               gpiog: gpio@ff146000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF146000 0x1000>;
+                       reg = <0xff146000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiog";
                };
-               gpioh: gpio@FF147000 {
+               gpioh: gpio@ff147000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF147000 0x1000>;
+                       reg = <0xff147000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioh";
                };
-               gpioi: gpio@FF148000 {
+               gpioi: gpio@ff148000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF148000 0x1000>;
+                       reg = <0xff148000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <12>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioi";
                };
-               gpioj: gpio@FF149000 {
+               gpioj: gpio@ff149000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF149000 0x1000>;
+                       reg = <0xff149000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <32>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioj";
                };
-               gpiok: gpio@FF14a000 {
+               gpiok: gpio@ff14a000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14A000 0x1000>;
+                       reg = <0xff14a000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <22>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiok";
                };
-               gpiol: gpio@FF14b000 {
+               gpiol: gpio@ff14b000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14B000 0x1000>;
+                       reg = <0xff14b000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiol";
                };
-               gpiom: gpio@FF14c000 {
+               gpiom: gpio@ff14c000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14C000 0x1000>;
+                       reg = <0xff14c000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiom";
                };
-               gpion: gpio@FF14d000 {
+               gpion: gpio@ff14d000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14D000 0x1000>;
+                       reg = <0xff14d000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <5>;

diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index 3acf04db80302875d86d4e4de355c077bfabbd02..c968e677db46b01e88f344c52a6232f33fda9556 100644 (file)
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -37,27 +37,27 @@
        };
 
        soc100 {
-               uart@FF100000 {
+               uart@ff100000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&pctl_uart0>;
                };
-               ethernet@FE100000 {
+               ethernet@fe100000 {
                        phy-mode = "rgmii";
                };
 
-               i2c0: i2c@FF120000 {
+               i2c0: i2c@ff120000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c1: i2c@FF121000 {
+               i2c1: i2c@ff121000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c2: i2c@FF122000 {
+               i2c2: i2c@ff122000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c3: i2c@FF123000 {
+               i2c3: i2c@ff123000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c4: i2c@FF124000 {
+               i2c4: i2c@ff124000 {
                        i2c-sda-hold-time-ns = <432>;
                };
 

diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi
index f9e7686044ebee0a4c49e1d4824810e49747256e..6a1615f58f052d3586dda6038e7b2ebc3a55d161 100644 (file)
--- a/arch/arc/boot/dts/abilis_tb101.dtsi
+++ b/arch/arc/boot/dts/abilis_tb101.dtsi
@@ -38,7 +38,7 @@
                        clock-div = <6>;
                };
 
-               iomux: iomux@FF10601c {
+               iomux: iomux@ff10601c {
                        /* Port 1 */
                        pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
                                abilis,function = "mis0";
@@ -171,182 +171,182 @@
                        };
                };
 
-               gpioa: gpio@FF140000 {
+               gpioa: gpio@ff140000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF140000 0x1000>;
+                       reg = <0xff140000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioa";
                };
-               gpiob: gpio@FF141000 {
+               gpiob: gpio@ff141000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF141000 0x1000>;
+                       reg = <0xff141000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiob";
                };
-               gpioc: gpio@FF142000 {
+               gpioc: gpio@ff142000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF142000 0x1000>;
+                       reg = <0xff142000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioc";
                };
-               gpiod: gpio@FF143000 {
+               gpiod: gpio@ff143000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF143000 0x1000>;
+                       reg = <0xff143000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiod";
                };
-               gpioe: gpio@FF144000 {
+               gpioe: gpio@ff144000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF144000 0x1000>;
+                       reg = <0xff144000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioe";
                };
-               gpiof: gpio@FF145000 {
+               gpiof: gpio@ff145000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF145000 0x1000>;
+                       reg = <0xff145000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiof";
                };
-               gpiog: gpio@FF146000 {
+               gpiog: gpio@ff146000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF146000 0x1000>;
+                       reg = <0xff146000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiog";
                };
-               gpioh: gpio@FF147000 {
+               gpioh: gpio@ff147000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF147000 0x1000>;
+                       reg = <0xff147000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioh";
                };
-               gpioi: gpio@FF148000 {
+               gpioi: gpio@ff148000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF148000 0x1000>;
+                       reg = <0xff148000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <12>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioi";
                };
-               gpioj: gpio@FF149000 {
+               gpioj: gpio@ff149000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF149000 0x1000>;
+                       reg = <0xff149000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <32>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioj";
                };
-               gpiok: gpio@FF14a000 {
+               gpiok: gpio@ff14a000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14A000 0x1000>;
+                       reg = <0xff14a000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <22>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiok";
                };
-               gpiol: gpio@FF14b000 {
+               gpiol: gpio@ff14b000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14B000 0x1000>;
+                       reg = <0xff14b000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiol";
                };
-               gpiom: gpio@FF14c000 {
+               gpiom: gpio@ff14c000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14C000 0x1000>;
+                       reg = <0xff14c000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiom";
                };
-               gpion: gpio@FF14d000 {
+               gpion: gpio@ff14d000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14D000 0x1000>;
+                       reg = <0xff14d000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <5>;

diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index 37d88c5dd181fc5c0de3eb8bd7526d84e56f483c..05143ce9c120434a0d64ce892ed593dc038d8cf1 100644 (file)
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -37,27 +37,27 @@
        };
 
        soc100 {
-               uart@FF100000 {
+               uart@ff100000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&pctl_uart0>;
                };
-               ethernet@FE100000 {
+               ethernet@fe100000 {
                        phy-mode = "rgmii";
                };
 
-               i2c0: i2c@FF120000 {
+               i2c0: i2c@ff120000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c1: i2c@FF121000 {
+               i2c1: i2c@ff121000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c2: i2c@FF122000 {
+               i2c2: i2c@ff122000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c3: i2c@FF123000 {
+               i2c3: i2c@ff123000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c4: i2c@FF124000 {
+               i2c4: i2c@ff124000 {
                        i2c-sda-hold-time-ns = <432>;
                };
 

diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index 3121536b25a375883a5eca1b94a3e2a4db372680..2fbf1bdfe6de815f0865865338f225a897a204c5 100644 (file)
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -54,7 +54,7 @@
                #size-cells     = <1>;
                device_type     = "soc";
                ranges          = <0xfe000000 0xfe000000 0x02000000
-                               0x000F0000 0x000F0000 0x00010000>;
+                               0x000f0000 0x000f0000 0x00010000>;
                compatible      = "abilis,tb10x", "simple-bus";
 
                pll0: oscillator {
@@ -75,10 +75,10 @@
                        clock-output-names = "ahb_clk";
                };
 
-               iomux: iomux@FF10601c {
+               iomux: iomux@ff10601c {
                        compatible = "abilis,tb10x-iomux";
                        #gpio-range-cells = <3>;
-                       reg = <0xFF10601c 0x4>;
+                       reg = <0xff10601c 0x4>;
                };
 
                intc: interrupt-controller {
@@ -88,7 +88,7 @@
                };
                tb10x_ictl: pic@fe002000 {
                        compatible = "abilis,tb10x-ictl";
-                       reg = <0xFE002000 0x20>;
+                       reg = <0xfe002000 0x20>;
                        interrupt-controller;
                        #interrupt-cells = <2>;
                        interrupt-parent = <&intc>;
@@ -96,27 +96,27 @@
                                        20 21 22 23 24 25 26 27 28 29 30 31>;
                };
 
-               uart@FF100000 {
+               uart@ff100000 {
                        compatible = "snps,dw-apb-uart";
-                       reg = <0xFF100000 0x100>;
+                       reg = <0xff100000 0x100>;
                        clock-frequency = <166666666>;
                        interrupts = <25 8>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        interrupt-parent = <&tb10x_ictl>;
                };
-               ethernet@FE100000 {
+               ethernet@fe100000 {
                        compatible = "snps,dwmac-3.70a","snps,dwmac";
-                       reg = <0xFE100000 0x1058>;
+                       reg = <0xfe100000 0x1058>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <6 8>;
                        interrupt-names = "macirq";
                        clocks = <&ahb_clk>;
                        clock-names = "stmmaceth";
                };
-               dma@FE000000 {
+               dma@fe000000 {
                        compatible = "snps,dma-spear1340";
-                       reg = <0xFE000000 0x400>;
+                       reg = <0xfe000000 0x400>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <14 8>;
                        dma-channels = <6>;
@@ -132,70 +132,70 @@
                        multi-block = <1 1 1 1 1 1>;
                };
 
-               i2c0: i2c@FF120000 {
+               i2c0: i2c@ff120000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF120000 0x1000>;
+                       reg = <0xff120000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c1: i2c@FF121000 {
+               i2c1: i2c@ff121000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF121000 0x1000>;
+                       reg = <0xff121000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c2: i2c@FF122000 {
+               i2c2: i2c@ff122000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF122000 0x1000>;
+                       reg = <0xff122000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c3: i2c@FF123000 {
+               i2c3: i2c@ff123000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF123000 0x1000>;
+                       reg = <0xff123000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c4: i2c@FF124000 {
+               i2c4: i2c@ff124000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF124000 0x1000>;
+                       reg = <0xff124000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
 
-               spi0: spi@0xFE010000 {
+               spi0: spi@fe010000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        cell-index = <0>;
                        compatible = "abilis,tb100-spi";
                        num-cs = <1>;
-                       reg = <0xFE010000 0x20>;
+                       reg = <0xfe010000 0x20>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <26 8>;
                        clocks = <&ahb_clk>;
                };
-               spi1: spi@0xFE011000 {
+               spi1: spi@fe011000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        cell-index = <1>;
                        compatible = "abilis,tb100-spi";
                        num-cs = <2>;
-                       reg = <0xFE011000 0x20>;
+                       reg = <0xfe011000 0x20>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <10 8>;
                        clocks = <&ahb_clk>;
@@ -226,23 +226,23 @@
                        interrupts = <20 2>, <19 2>;
                        interrupt-names = "cmd_irq", "event_irq";
                };
-               tb10x_mdsc0: tb10x-mdscr@FF300000 {
+               tb10x_mdsc0: tb10x-mdscr@ff300000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF300000 0x7000>;
+                       reg = <0xff300000 0x7000>;
                        tb100-mdscr-manage-tsin;
                };
-               tb10x_mscr0: tb10x-mdscr@FF307000 {
+               tb10x_mscr0: tb10x-mdscr@ff307000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF307000 0x7000>;
+                       reg = <0xff307000 0x7000>;
                };
                tb10x_scr0: tb10x-mdscr@ff30e000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF30e000 0x4000>;
+                       reg = <0xff30e000 0x4000>;
                        tb100-mdscr-manage-tsin;
                };
                tb10x_scr1: tb10x-mdscr@ff312000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF312000 0x4000>;
+                       reg = <0xff312000 0x4000>;
                        tb100-mdscr-manage-tsin;
                };
                tb10x_wfb: tb10x-wfb@ff319000 {

diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index fdc266504ada273e6efaf72c18cc8c2e2f48edf2..37be3bf03ad632f75214f82ff984d9f781e68358 100644 (file)
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -41,7 +41,7 @@
                 * this GPIO block ORs all interrupts on CPU card (creg,..)
                 * to uplink only 1 IRQ to ARC core intc
                 */
-               dw-apb-gpio@0x2000 {
+               dw-apb-gpio@2000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = < 0x2000 0x80 >;
                        #address-cells = <1>;
@@ -60,7 +60,7 @@
                        };
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <33333000>;
@@ -88,7 +88,7 @@
         * avoid duplicating the MB dtsi file given that IRQ from
         * this intc to cpu intc are different for axs101 and axs103
         */
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0x0 0xe0012000 0x0 0x200 >;

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index d75d65ddf8e31db78c58fa9882b90c2e6be2ed4b..effa37536d7ad3a02668e0455ed93220c245c2cb 100644 (file)
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -55,7 +55,7 @@
                 * this GPIO block ORs all interrupts on CPU card (creg,..)
                 * to uplink only 1 IRQ to ARC core intc
                 */
-               dw-apb-gpio@0x2000 {
+               dw-apb-gpio@2000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = < 0x2000 0x80 >;
                        #address-cells = <1>;
@@ -74,7 +74,7 @@
                        };
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <33333000>;
@@ -102,19 +102,19 @@
         * external DMA buffer located outside of IOC aperture.
         */
        axs10x_mb {
-               ethernet@0x18000 {
+               ethernet@18000 {
                        dma-coherent;
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        dma-coherent;
                };
 
-               ohci@0x60000 {
+               ohci@60000 {
                        dma-coherent;
                };
 
-               mmc@0x15000 {
+               mmc@15000 {
                        dma-coherent;
                };
        };
@@ -132,7 +132,7 @@
         * avoid duplicating the MB dtsi file given that IRQ from
         * this intc to cpu intc are different for axs101 and axs103
         */
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -153,7 +153,7 @@
                #size-cells = <2>;
                ranges;
                /*
-                * Move frame buffer out of IOC aperture (0x8z-0xAz).
+                * Move frame buffer out of IOC aperture (0x8z-0xaz).
                 */
                frame_buffer: frame_buffer@be000000 {
                        compatible = "shared-dma-pool";

diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index a05bb737ea6392f5e77cd3830dceb8afe620943e..e401e59f61802f2ef33fcb12854a7f97f896200d 100644 (file)
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -62,7 +62,7 @@
                 * this GPIO block ORs all interrupts on CPU card (creg,..)
                 * to uplink only 1 IRQ to ARC core intc
                 */
-               dw-apb-gpio@0x2000 {
+               dw-apb-gpio@2000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = < 0x2000 0x80 >;
                        #address-cells = <1>;
@@ -81,7 +81,7 @@
                        };
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <33333000>;
@@ -109,19 +109,19 @@
         * external DMA buffer located outside of IOC aperture.
         */
        axs10x_mb {
-               ethernet@0x18000 {
+               ethernet@18000 {
                        dma-coherent;
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        dma-coherent;
                };
 
-               ohci@0x60000 {
+               ohci@60000 {
                        dma-coherent;
                };
 
-               mmc@0x15000 {
+               mmc@15000 {
                        dma-coherent;
                };
        };
@@ -138,7 +138,7 @@
         * avoid duplicating the MB dtsi file given that IRQ from
         * this intc to cpu intc are different for axs101 and axs103
         */
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -159,7 +159,7 @@
                #size-cells = <2>;
                ranges;
                /*
-                * Move frame buffer out of IOC aperture (0x8z-0xAz).
+                * Move frame buffer out of IOC aperture (0x8z-0xaz).
                 */
                frame_buffer: frame_buffer@be000000 {
                        compatible = "shared-dma-pool";

diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 37bafd44e36d0fed9b85e80ea356cd78df0c1872..4ead6dc9af2f7e3823b332ee9d7ed5df5b920d25 100644 (file)
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -72,7 +72,7 @@
                        };
                };
 
-               gmac: ethernet@0x18000 {
+               gmac: ethernet@18000 {
                        #interrupt-cells = <1>;
                        compatible = "snps,dwmac";
                        reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@
                        mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        compatible = "generic-ehci";
                        reg = < 0x40000 0x100 >;
                        interrupts = < 8 >;
                };
 
-               ohci@0x60000 {
+               ohci@60000 {
                        compatible = "generic-ohci";
                        reg = < 0x60000 0x100 >;
                        interrupts = < 8 >;
@@ -118,7 +118,7 @@
                 * dw_mci_pltfm_prepare_command() is used in generic platform
                 * code.
                 */
-               mmc@0x15000 {
+               mmc@15000 {
                        compatible = "altr,socfpga-dw-mshc";
                        reg = < 0x15000 0x400 >;
                        fifo-depth = < 16 >;
@@ -129,7 +129,7 @@
                        bus-width = < 4 >;
                };
 
-               uart@0x20000 {
+               uart@20000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x20000 0x100>;
                        clock-frequency = <33333333>;
@@ -139,7 +139,7 @@
                        reg-io-width = <4>;
                };
 
-               uart@0x21000 {
+               uart@21000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x21000 0x100>;
                        clock-frequency = <33333333>;
@@ -150,7 +150,7 @@
                };
 
                /* UART muxed with USB data port (ttyS3) */
-               uart@0x22000 {
+               uart@22000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x22000 0x100>;
                        clock-frequency = <33333333>;
@@ -160,7 +160,7 @@
                        reg-io-width = <4>;
                };
 
-               i2c@0x1d000 {
+               i2c@1d000 {
                        compatible = "snps,designware-i2c";
                        reg = <0x1d000 0x100>;
                        clock-frequency = <400000>;
@@ -177,7 +177,7 @@
                        #sound-dai-cells = <0>;
                };
 
-               i2c@0x1f000 {
+               i2c@1f000 {
                        compatible = "snps,designware-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -218,13 +218,13 @@
                                };
                        };
 
-                       eeprom@0x54{
+                       eeprom@54{
                                compatible = "atmel,24c01";
                                reg = <0x54>;
                                pagesize = <0x8>;
                        };
 
-                       eeprom@0x57{
+                       eeprom@57{
                                compatible = "atmel,24c04";
                                reg = <0x57>;
                                pagesize = <0x8>;

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 43f17b51ee89cca00a0b2eebb7ed045d49de03a0..6c23fa063cedc3c47555aae5fde62d27e7593d47 100644 (file)
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -110,12 +110,12 @@
                cgu_rst: reset-controller@8a0 {
                        compatible = "snps,hsdk-reset";
                        #reset-cells = <1>;
-                       reg = <0x8A0 0x4>, <0xFF0 0x4>;
+                       reg = <0x8a0 0x4>, <0xff0 0x4>;
                };
 
                core_clk: core-clk@0 {
                        compatible = "snps,hsdk-core-pll-clock";
-                       reg = <0x00 0x10>, <0x14B8 0x4>;
+                       reg = <0x00 0x10>, <0x14b8 0x4>;
                        #clock-cells = <0>;
                        clocks = <&input_clk>;
 

diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index 0fd6ba985b164b7752c26544e5d4b6d9684c88be..84e8766c8ca2c6144167ea48e969145e6bebfe71 100644 (file)
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -36,7 +36,7 @@
                        #interrupt-cells = <1>;
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <2403200>;
@@ -49,7 +49,7 @@
 
        };
 
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0xe0012000 0x200 >;

diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 28956f9a9f3db7e12042821ea72d5a4af0514e2a..eb7e705e8a2789722a449e5abf5d5ad122619f99 100644 (file)
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -44,7 +44,7 @@
                        #interrupt-cells = <1>;
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <2403200>;
@@ -57,7 +57,7 @@
 
        };
 
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0xe0012000 0x200 >;

diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 48bb4b4cd234ed65a8b4002dbf060f3bc09b7e0d..925d5cc95dbbbf1419b920d4d3e73743ec794dd4 100644 (file)
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -36,7 +36,7 @@
                        };
                };
 
-               ethernet@0x18000 {
+               ethernet@18000 {
                        #interrupt-cells = <1>;
                        compatible = "snps,dwmac";
                        reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@
                        clock-names = "stmmaceth";
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        compatible = "generic-ehci";
                        reg = < 0x40000 0x100 >;
                        interrupts = < 8 >;
                };
 
-               uart@0x20000 {
+               uart@20000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x20000 0x100>;
                        clock-frequency = <2403200>;
@@ -65,7 +65,7 @@
                        reg-io-width = <4>;
                };
 
-               uart@0x21000 {
+               uart@21000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x21000 0x100>;
                        clock-frequency = <2403200>;
@@ -75,7 +75,7 @@
                        reg-io-width = <4>;
                };
 
-               uart@0x22000 {
+               uart@22000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x22000 0x100>;
                        clock-frequency = <2403200>;
@@ -101,7 +101,7 @@
                        interrupt-names = "arc_ps2_irq";
                };
 
-               mmc@0x15000 {
+               mmc@15000 {
                        compatible = "snps,dw-mshc";
                        reg = <0x15000 0x400>;
                        fifo-depth = <1024>;
@@ -117,11 +117,11 @@
         * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
         *
         * This node is intentionally put outside of MB above becase
-        * it maps areas outside of MB's 0xEz-0xFz.
+        * it maps areas outside of MB's 0xez-0xfz.
         */
-       uio_ev: uio@0xD0000000 {
+       uio_ev: uio@d0000000 {
                compatible = "generic-uio";
-               reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+               reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
                reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
                interrupt-parent = <&mb_intc>;
                interrupts = <23>;