.map_voltage = regulator_map_voltage_iterate,
};
+/*
+ * LDO ops without voltage selection, used for MICLDO on BCM59054.
+ * (These are currently the same as VBUS ops, but will be different
+ * in the future once full PMMODE support is implemented.)
+ */
+static const struct regulator_ops bcm590xx_ops_ldo_novolt = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+};
+
static const struct regulator_ops bcm590xx_ops_dcdc = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
#define BCM59056_SR_DESC(_name, _name_lower, _ranges) \
BCM590XX_SR_DESC(BCM59056, bcm59056, _name, _name_lower, _ranges)
+#define BCM59054_REG_DESC(_name, _name_lower) \
+ BCM590XX_REG_DESC(BCM59054, _name, _name_lower)
+#define BCM59054_LDO_DESC(_name, _name_lower, _table) \
+ BCM590XX_LDO_DESC(BCM59054, bcm59054, _name, _name_lower, _table)
+#define BCM59054_SR_DESC(_name, _name_lower, _ranges) \
+ BCM590XX_SR_DESC(BCM59054, bcm59054, _name, _name_lower, _ranges)
+
/* BCM59056 data */
/* I2C slave 0 registers */
},
};
+/* BCM59054 data */
+
+/* I2C slave 0 registers */
+#define BCM59054_RFLDOPMCTRL1 0x60
+#define BCM59054_CAMLDO1PMCTRL1 0x62
+#define BCM59054_CAMLDO2PMCTRL1 0x64
+#define BCM59054_SIMLDO1PMCTRL1 0x66
+#define BCM59054_SIMLDO2PMCTRL1 0x68
+#define BCM59054_SDLDOPMCTRL1 0x6a
+#define BCM59054_SDXLDOPMCTRL1 0x6c
+#define BCM59054_MMCLDO1PMCTRL1 0x6e
+#define BCM59054_MMCLDO2PMCTRL1 0x70
+#define BCM59054_AUDLDOPMCTRL1 0x72
+#define BCM59054_MICLDOPMCTRL1 0x74
+#define BCM59054_USBLDOPMCTRL1 0x76
+#define BCM59054_VIBLDOPMCTRL1 0x78
+#define BCM59054_IOSR1PMCTRL1 0x7a
+#define BCM59054_IOSR2PMCTRL1 0x7c
+#define BCM59054_CSRPMCTRL1 0x7e
+#define BCM59054_SDSR1PMCTRL1 0x82
+#define BCM59054_SDSR2PMCTRL1 0x86
+#define BCM59054_MMSRPMCTRL1 0x8a
+#define BCM59054_VSRPMCTRL1 0x8e
+#define BCM59054_RFLDOCTRL 0x96
+#define BCM59054_CAMLDO1CTRL 0x97
+#define BCM59054_CAMLDO2CTRL 0x98
+#define BCM59054_SIMLDO1CTRL 0x99
+#define BCM59054_SIMLDO2CTRL 0x9a
+#define BCM59054_SDLDOCTRL 0x9b
+#define BCM59054_SDXLDOCTRL 0x9c
+#define BCM59054_MMCLDO1CTRL 0x9d
+#define BCM59054_MMCLDO2CTRL 0x9e
+#define BCM59054_AUDLDOCTRL 0x9f
+#define BCM59054_MICLDOCTRL 0xa0
+#define BCM59054_USBLDOCTRL 0xa1
+#define BCM59054_VIBLDOCTRL 0xa2
+#define BCM59054_CSRVOUT1 0xc0
+#define BCM59054_IOSR1VOUT1 0xc3
+#define BCM59054_IOSR2VOUT1 0xc6
+#define BCM59054_MMSRVOUT1 0xc9
+#define BCM59054_SDSR1VOUT1 0xcc
+#define BCM59054_SDSR2VOUT1 0xcf
+#define BCM59054_VSRVOUT1 0xd2
+
+/* I2C slave 1 registers */
+#define BCM59054_LVLDO1PMCTRL1 0x16
+#define BCM59054_LVLDO2PMCTRL1 0x18
+#define BCM59054_GPLDO1CTRL 0x1a
+#define BCM59054_GPLDO2CTRL 0x1b
+#define BCM59054_GPLDO3CTRL 0x1c
+#define BCM59054_TCXLDOCTRL 0x1d
+#define BCM59054_LVLDO1CTRL 0x1e
+#define BCM59054_LVLDO2CTRL 0x1f
+#define BCM59054_OTG_CTRL 0x40
+#define BCM59054_GPLDO1PMCTRL1 0x57
+#define BCM59054_GPLDO2PMCTRL1 0x59
+#define BCM59054_GPLDO3PMCTRL1 0x5b
+#define BCM59054_TCXLDOPMCTRL1 0x5d
+
+/*
+ * RFLDO to VSR regulators are
+ * accessed via I2C slave 0
+ */
+
+/* LDO regulator IDs */
+#define BCM59054_REG_RFLDO 0
+#define BCM59054_REG_CAMLDO1 1
+#define BCM59054_REG_CAMLDO2 2
+#define BCM59054_REG_SIMLDO1 3
+#define BCM59054_REG_SIMLDO2 4
+#define BCM59054_REG_SDLDO 5
+#define BCM59054_REG_SDXLDO 6
+#define BCM59054_REG_MMCLDO1 7
+#define BCM59054_REG_MMCLDO2 8
+#define BCM59054_REG_AUDLDO 9
+#define BCM59054_REG_MICLDO 10
+#define BCM59054_REG_USBLDO 11
+#define BCM59054_REG_VIBLDO 12
+
+/* DCDC regulator IDs */
+#define BCM59054_REG_CSR 13
+#define BCM59054_REG_IOSR1 14
+#define BCM59054_REG_IOSR2 15
+#define BCM59054_REG_MMSR 16
+#define BCM59054_REG_SDSR1 17
+#define BCM59054_REG_SDSR2 18
+#define BCM59054_REG_VSR 19
+
+/*
+ * GPLDO1 to VBUS regulators are
+ * accessed via I2C slave 1
+ */
+
+#define BCM59054_REG_GPLDO1 20
+#define BCM59054_REG_GPLDO2 21
+#define BCM59054_REG_GPLDO3 22
+#define BCM59054_REG_TCXLDO 23
+#define BCM59054_REG_LVLDO1 24
+#define BCM59054_REG_LVLDO2 25
+#define BCM59054_REG_VBUS 26
+
+#define BCM59054_NUM_REGS 27
+
+/* LDO group 1: supported voltages in microvolts */
+static const unsigned int bcm59054_ldo_1_table[] = {
+ 1200000, 1800000, 2500000, 2700000, 2800000,
+ 2900000, 3000000, 3300000,
+};
+
+/* LDO group 2: supported voltages in microvolts */
+static const unsigned int bcm59054_ldo_2_table[] = {
+ 3100000, 1800000, 2500000, 2700000, 2800000,
+ 2900000, 3000000, 3300000,
+};
+
+/* LDO group 3: supported voltages in microvolts */
+static const unsigned int bcm59054_ldo_3_table[] = {
+ 1000000, 1107000, 1143000, 1214000, 1250000,
+ 1464000, 1500000, 1786000,
+};
+
+/* DCDC group SR: supported voltages in microvolts */
+static const struct linear_range bcm59054_dcdc_sr_ranges[] = {
+ REGULATOR_LINEAR_RANGE(0, 0, 1, 0),
+ REGULATOR_LINEAR_RANGE(860000, 2, 60, 10000),
+ REGULATOR_LINEAR_RANGE(1500000, 61, 61, 0),
+ REGULATOR_LINEAR_RANGE(1800000, 62, 62, 0),
+ REGULATOR_LINEAR_RANGE(900000, 63, 63, 0),
+};
+
+/* DCDC group VSR (BCM59054A1): supported voltages in microvolts */
+static const struct linear_range bcm59054_dcdc_vsr_a1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(0, 0, 1, 0),
+ REGULATOR_LINEAR_RANGE(860000, 2, 59, 10000),
+ REGULATOR_LINEAR_RANGE(1700000, 60, 60, 0),
+ REGULATOR_LINEAR_RANGE(1500000, 61, 61, 0),
+ REGULATOR_LINEAR_RANGE(1800000, 62, 62, 0),
+ REGULATOR_LINEAR_RANGE(1600000, 63, 63, 0),
+};
+
+/* DCDC group CSR: supported voltages in microvolts */
+static const struct linear_range bcm59054_dcdc_csr_ranges[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0, 1, 100000),
+ REGULATOR_LINEAR_RANGE(860000, 2, 60, 10000),
+ REGULATOR_LINEAR_RANGE(900000, 61, 63, 0),
+};
+
+static const struct bcm590xx_reg_data bcm59054_regs[BCM59054_NUM_REGS] = {
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(RFLDO, rfldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(CAMLDO1, camldo1, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(CAMLDO2, camldo2, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SIMLDO1, simldo1, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SIMLDO2, simldo2, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SDLDO, sdldo, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SDXLDO, sdxldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(MMCLDO1, mmcldo1, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(MMCLDO2, mmcldo2, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(AUDLDO, audldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_REG_DESC(MICLDO, micldo),
+ .ops = &bcm590xx_ops_ldo_novolt,
+ /* MICLDO is locked at 1.8V */
+ .n_voltages = 1,
+ .fixed_uV = 1800000,
+ .enable_reg = BCM59054_MICLDOPMCTRL1,
+ .enable_mask = BCM590XX_REG_ENABLE,
+ .enable_is_inverted = true,
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(USBLDO, usbldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(VIBLDO, vibldo, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(CSR, csr, dcdc_csr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(IOSR1, iosr1, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(IOSR2, iosr2, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(MMSR, mmsr, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(SDSR1, sdsr1, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(SDSR2, sdsr2, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(VSR, vsr, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(GPLDO1, gpldo1, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(GPLDO2, gpldo2, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(GPLDO3, gpldo3, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(TCXLDO, tcxldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(LVLDO1, lvldo1, ldo_3_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(LVLDO2, lvldo2, ldo_3_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_VBUS,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_REG_DESC(VBUS, vbus),
+ .ops = &bcm590xx_ops_vbus,
+ .n_voltages = 1,
+ .fixed_uV = 5000000,
+ .enable_reg = BCM59054_OTG_CTRL,
+ .enable_mask = BCM590XX_VBUS_ENABLE,
+ },
+ },
+};
+
+/*
+ * BCM59054A1 regulators; same as previous revision, but with different
+ * VSR voltage table.
+ */
+static const struct bcm590xx_reg_data bcm59054_a1_regs[BCM59054_NUM_REGS] = {
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(RFLDO, rfldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(CAMLDO1, camldo1, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(CAMLDO2, camldo2, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SIMLDO1, simldo1, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SIMLDO2, simldo2, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SDLDO, sdldo, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(SDXLDO, sdxldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(MMCLDO1, mmcldo1, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(MMCLDO2, mmcldo2, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(AUDLDO, audldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_REG_DESC(MICLDO, micldo),
+ .ops = &bcm590xx_ops_ldo_novolt,
+ /* MICLDO is locked at 1.8V */
+ .n_voltages = 1,
+ .fixed_uV = 1800000,
+ .enable_reg = BCM59054_MICLDOPMCTRL1,
+ .enable_mask = BCM590XX_REG_ENABLE,
+ .enable_is_inverted = true,
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(USBLDO, usbldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_LDO,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_LDO_DESC(VIBLDO, vibldo, ldo_2_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(CSR, csr, dcdc_csr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(IOSR1, iosr1, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(IOSR2, iosr2, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(MMSR, mmsr, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(SDSR1, sdsr1, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(SDSR2, sdsr2, dcdc_sr_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_SR,
+ .regmap = BCM590XX_REGMAP_PRI,
+ .desc = {
+ BCM59054_SR_DESC(VSR, vsr, dcdc_vsr_a1_ranges),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(GPLDO1, gpldo1, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(GPLDO2, gpldo2, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(GPLDO3, gpldo3, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(TCXLDO, tcxldo, ldo_1_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(LVLDO1, lvldo1, ldo_3_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_GPLDO,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_LDO_DESC(LVLDO2, lvldo2, ldo_3_table),
+ },
+ },
+
+ {
+ .type = BCM590XX_REG_TYPE_VBUS,
+ .regmap = BCM590XX_REGMAP_SEC,
+ .desc = {
+ BCM59054_REG_DESC(VBUS, vbus),
+ .ops = &bcm590xx_ops_vbus,
+ .n_voltages = 1,
+ .fixed_uV = 5000000,
+ .enable_reg = BCM59054_OTG_CTRL,
+ .enable_mask = BCM590XX_VBUS_ENABLE,
+ },
+ },
+};
+
static int bcm590xx_probe(struct platform_device *pdev)
{
struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent);
return -ENOMEM;
pmu->mfd = bcm590xx;
- pmu->n_regulators = BCM59056_NUM_REGS;
- pmu->regs = bcm59056_regs;
+
+ switch (pmu->mfd->pmu_id) {
+ case BCM590XX_PMUID_BCM59054:
+ pmu->n_regulators = BCM59054_NUM_REGS;
+ if (pmu->mfd->rev_analog == BCM59054_REV_ANALOG_A1)
+ pmu->regs = bcm59054_a1_regs;
+ else
+ pmu->regs = bcm59054_regs;
+ break;
+ case BCM590XX_PMUID_BCM59056:
+ pmu->n_regulators = BCM59056_NUM_REGS;
+ pmu->regs = bcm59056_regs;
+ break;
+ default:
+ dev_err(bcm590xx->dev,
+ "unknown device type, could not initialize\n");
+ return -EINVAL;
+ }
platform_set_drvdata(pdev, pmu);
projects / thirdparty / linux.git / commitdiff
