+++ /dev/null
-From d7d5751b85040ecb50c47907be2f19295159d4e8 Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sashal@kernel.org>
-Date: Mon, 16 May 2022 21:37:09 +0200
-Subject: ARM: dts: exynos: add panel and backlight to p4note
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-From: Martin Jücker <martin.juecker@gmail.com>
-
-[ Upstream commit 6c52573bf4c3a0f6e7142264fb36b31ae2c3707a ]
-
-Add configuration for the LTL101AL01 panel and a pwm backlight to drive
-the display in the p4note devices.
-
-Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
-Link: https://lore.kernel.org/r/20220516193709.10037-3-martin.juecker@gmail.com
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Stable-dep-of: a26aa1238415 ("ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers")
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- arch/arm/boot/dts/exynos4412-p4note.dtsi | 84 ++++++++++++++++++++----
- 1 file changed, 71 insertions(+), 13 deletions(-)
-
-diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
-index 97f131b1014b..1fd051b52387 100644
---- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
-+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
-@@ -106,6 +106,16 @@
- regulator-always-on;
- };
-
-+ panel_vdd: voltage-regulator-4 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "LCD_ENABLE";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&lcd_enable>;
-+ gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ regulator-boot-on;
-+ };
-+
- wlan_pwrseq: sdhci3-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
-@@ -216,6 +226,32 @@
- monitored-battery = <&battery_cell>;
- };
- };
-+
-+ panel {
-+ compatible = "samsung,ltl101al01";
-+ pinctrl-0 = <&lvds_nshdn>;
-+ pinctrl-names = "default";
-+ power-supply = <&panel_vdd>;
-+ enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
-+ backlight = <&backlight>;
-+
-+ port {
-+ lcd_ep: endpoint {
-+ remote-endpoint = <&fimd_ep>;
-+ };
-+ };
-+ };
-+
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pinctrl-0 = <&led_bl_reset>;
-+ pinctrl-names = "default";
-+ enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
-+ pwms = <&pwm 1 78770 0>;
-+ brightness-levels = <0 48 128 255>;
-+ num-interpolated-steps = <8>;
-+ default-brightness-level = <12>;
-+ };
- };
-
- &adc {
-@@ -295,22 +331,19 @@
- };
-
- &fimd {
-- pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-+ pinctrl-0 = <&lcd_clk &lcd_data24>;
- pinctrl-names = "default";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- status = "okay";
-
-- display-timings {
-- timing0 {
-- clock-frequency = <66666666>;
-- hactive = <1280>;
-- vactive = <800>;
-- hfront-porch = <18>;
-- hback-porch = <36>;
-- hsync-len = <16>;
-- vback-porch = <16>;
-- vfront-porch = <4>;
-- vsync-len = <3>;
-- hsync-active = <1>;
-+ samsung,invert-vclk;
-+
-+ port@3 {
-+ reg = <3>;
-+
-+ fimd_ep: endpoint {
-+ remote-endpoint = <&lcd_ep>;
- };
- };
- };
-@@ -687,6 +720,12 @@
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
-+ lcd_enable: lcd-enable-pins {
-+ samsung,pins = "gpc0-1";
-+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-+ };
-+
- sleep0: sleep-state {
- PIN_SLP(gpa0-0, INPUT, NONE);
- PIN_SLP(gpa0-1, OUT0, NONE);
-@@ -809,12 +848,24 @@
- /* 0 = CP, 1 = AP (serial output) */
- };
-
-+ led_bl_reset: led-bl-reset-pins {
-+ samsung,pins = "gpm0-1";
-+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-+ };
-+
- tsp_rst: tsp-rst-pins {
- samsung,pins = "gpm0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
-+ lvds_nshdn: lvds-nshdn-pins {
-+ samsung,pins = "gpm0-5";
-+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-+ };
-+
- tsp_irq: tsp-irq-pins {
- samsung,pins = "gpm2-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-@@ -1100,6 +1151,13 @@
- assigned-clock-parents = <&clock CLK_XUSBXTI>;
- };
-
-+&pwm {
-+ pinctrl-0 = <&pwm1_out>;
-+ pinctrl-names = "default";
-+ samsung,pwm-outputs = <1>;
-+ status = "okay";
-+};
-+
- &rtc {
- clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
- clock-names = "rtc", "rtc_src";
---
-2.35.1
-
+++ /dev/null
-From de9e83143066ba84b91fcfb99f5d9dbf45daa627 Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sashal@kernel.org>
-Date: Sat, 21 May 2022 23:27:08 +0300
-Subject: arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support
-
-From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-
-[ Upstream commit 34279d6e3f32c7b2dd1192d8ba3e1d28b6ac775e ]
-
-The IFC6560 is a board from Inforce Computing, built around the SDA660
-SoC. This patch describes core clocks, some regulators from the two
-PMICs, debug uart, storage, bluetooth and audio DSP remoteproc.
-
-The regulator settings are inherited from prior work by Konrad Dybcio
-and AngeloGioacchino Del Regno.
-
-Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
-Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220521202708.1509308-12-dmitry.baryshkov@linaro.org
-Stable-dep-of: 7dac7991408f ("arm64: dts: qcom: sc8280xp-pmics: Remove reg entry & use correct node name for pmc8280c_lpg node")
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- arch/arm64/boot/dts/qcom/Makefile | 1 +
- .../boot/dts/qcom/sda660-inforce-ifc6560.dts | 461 ++++++++++++++++++
- 2 files changed, 462 insertions(+)
- create mode 100644 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
-
-diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
-index 2f8aec2cc6db..12bb2f8bdac2 100644
---- a/arch/arm64/boot/dts/qcom/Makefile
-+++ b/arch/arm64/boot/dts/qcom/Makefile
-@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
- dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
- dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
- dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
-+dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
- dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
- dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
- dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
-diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
-new file mode 100644
-index 000000000000..28050bc5f081
---- /dev/null
-+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
-@@ -0,0 +1,461 @@
-+// SPDX-License-Identifier: BSD-3-Clause
-+/*
-+ * Copyright (c) 2021, Linaro Ltd.
-+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
-+ * Copyright (c) 2020, AngeloGioacchino Del Regno
-+ * <angelogioacchino.delregno@somainline.org>
-+ */
-+
-+/dts-v1/;
-+
-+#include "sdm660.dtsi"
-+#include "pm660.dtsi"
-+#include "pm660l.dtsi"
-+
-+/ {
-+ model = "Inforce 6560 Single Board Computer";
-+ compatible = "inforce,ifc6560", "qcom,sda660";
-+ chassis-type = "embedded"; /* SBC */
-+
-+ aliases {
-+ serial0 = &blsp1_uart2;
-+ serial1 = &blsp2_uart1;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ volup {
-+ label = "Volume Up";
-+ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_VOLUMEUP>;
-+ debounce-interval = <15>;
-+ };
-+ };
-+
-+ /*
-+ * Until we hook up type-c detection, we
-+ * have to stick with this. But it works.
-+ */
-+ extcon_usb: extcon-usb {
-+ compatible = "linux,extcon-usb-gpio";
-+ id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ hdmi-out {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con: endpoint {
-+ remote-endpoint = <&adv7533_out>;
-+ };
-+ };
-+ };
-+
-+ vph_pwr: vph-pwr-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vph_pwr";
-+ regulator-min-microvolt = <3800000>;
-+ regulator-max-microvolt = <3800000>;
-+
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ v3p3_bck_bst: v3p3-bck-bst-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "v3p3_bck_bst";
-+
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ vin-supply = <&vph_pwr>;
-+ };
-+
-+ v1p2_ldo: v1p2-ldo-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "v1p2_ldo";
-+
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+
-+ vin-supply = <&vph_pwr>;
-+ };
-+
-+ v5p0_boost: v5p0-boost-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "v5p0_boost";
-+
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+
-+ vin-supply = <&vph_pwr>;
-+ };
-+};
-+
-+&adsp_pil {
-+ firmware-name = "qcom/ifc6560/adsp.mbn";
-+};
-+
-+&blsp_i2c6 {
-+ status = "okay";
-+
-+ adv7533: hdmi@39 {
-+ compatible = "adi,adv7535";
-+ reg = <0x39>, <0x66>;
-+ reg-names = "main", "edid";
-+
-+ interrupt-parent = <&pm660l_gpios>;
-+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-+
-+ clocks = <&rpmcc RPM_SMD_BB_CLK2>;
-+ clock-names = "cec";
-+ /*
-+ * Limit to 3 lanes to prevent the bridge from changing amount
-+ * of lanes in the fly. MSM DSI host doesn't like that.
-+ */
-+ adi,dsi-lanes = <3>;
-+ avdd-supply = <&vreg_l13a_1p8>;
-+ dvdd-supply = <&vreg_l13a_1p8>;
-+ pvdd-supply = <&vreg_l13a_1p8>;
-+ a2vdd-supply = <&vreg_l13a_1p8>;
-+ v3p3-supply = <&v3p3_bck_bst>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+
-+ adv7533_in: endpoint {
-+ remote-endpoint = <&dsi0_out>;
-+ };
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+
-+ adv7533_out: endpoint {
-+ remote-endpoint = <&hdmi_con>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&blsp1_dma {
-+ /*
-+ * The board will lock up if we toggle the BLSP clock, unless the
-+ * BAM DMA interconnects support is in place.
-+ */
-+ /delete-property/ clocks;
-+};
-+
-+&blsp1_uart2 {
-+ status = "okay";
-+};
-+
-+&blsp2_dma {
-+ /*
-+ * The board will lock up if we toggle the BLSP clock, unless the
-+ * BAM DMA interconnects support is in place.
-+ */
-+ /delete-property/ clocks;
-+};
-+
-+&blsp2_uart1 {
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "qcom,wcn3990-bt";
-+
-+ vddio-supply = <&vreg_l13a_1p8>;
-+ vddxo-supply = <&vreg_l9a_1p8>;
-+ vddrf-supply = <&vreg_l6a_1p3>;
-+ vddch0-supply = <&vreg_l19a_3p3>;
-+ max-speed = <3200000>;
-+ };
-+};
-+
-+&dsi0 {
-+ status = "okay";
-+ vdda-supply = <&vreg_l1a_1p225>;
-+};
-+
-+&dsi0_out {
-+ remote-endpoint = <&adv7533_in>;
-+ data-lanes = <0 1 2 3>;
-+};
-+
-+&dsi0_phy {
-+ status = "okay";
-+ vcca-supply = <&vreg_l1b_0p925>;
-+};
-+
-+&mdss {
-+ status = "okay";
-+};
-+
-+&mmss_smmu {
-+ status = "okay";
-+};
-+
-+&pon_pwrkey {
-+ status = "okay";
-+};
-+
-+&pon_resin {
-+ status = "okay";
-+
-+ linux,code = <KEY_VOLUMEUP>;
-+};
-+
-+&qusb2phy0 {
-+ status = "okay";
-+
-+ vdd-supply = <&vreg_l1b_0p925>;
-+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
-+};
-+
-+&qusb2phy1 {
-+ status = "okay";
-+
-+ vdd-supply = <&vreg_l1b_0p925>;
-+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
-+};
-+
-+&rpm_requests {
-+ pm660-regulators {
-+ compatible = "qcom,rpm-pm660-regulators";
-+
-+ vdd_s1-supply = <&vph_pwr>;
-+ vdd_s2-supply = <&vph_pwr>;
-+ vdd_s3-supply = <&vph_pwr>;
-+ vdd_s4-supply = <&vph_pwr>;
-+ vdd_s5-supply = <&vph_pwr>;
-+ vdd_s6-supply = <&vph_pwr>;
-+
-+ vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
-+ vdd_l2_l3-supply = <&vreg_s2b_1p05>;
-+ vdd_l5-supply = <&vreg_s2b_1p05>;
-+ vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
-+ vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
-+
-+ vreg_s4a_2p04: s4 {
-+ regulator-min-microvolt = <1805000>;
-+ regulator-max-microvolt = <2040000>;
-+ regulator-enable-ramp-delay = <200>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ };
-+
-+ vreg_s5a_1p35: s5 {
-+ regulator-min-microvolt = <1224000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-enable-ramp-delay = <200>;
-+ regulator-ramp-delay = <0>;
-+ };
-+
-+ vreg_l1a_1p225: l1 {
-+ regulator-min-microvolt = <1150000>;
-+ regulator-max-microvolt = <1250000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l6a_1p3: l6 {
-+ regulator-min-microvolt = <1304000>;
-+ regulator-max-microvolt = <1368000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l8a_1p8: l8 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ regulator-system-load = <325000>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l9a_1p8: l9 {
-+ regulator-min-microvolt = <1804000>;
-+ regulator-max-microvolt = <1896000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l13a_1p8: l13 {
-+ /* This gives power to the LPDDR4: never turn it off! */
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1944000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ vreg_l19a_3p3: l19 {
-+ regulator-min-microvolt = <3312000>;
-+ regulator-max-microvolt = <3400000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ regulator-allow-set-load;
-+ };
-+ };
-+
-+ pm660l-regulators {
-+ compatible = "qcom,rpm-pm660l-regulators";
-+
-+ vdd_s1-supply = <&vph_pwr>;
-+ vdd_s2-supply = <&vph_pwr>;
-+ vdd_s3_s4-supply = <&vph_pwr>;
-+ vdd_s5-supply = <&vph_pwr>;
-+ vdd_s6-supply = <&vph_pwr>;
-+
-+ vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
-+ vdd_l2-supply = <&vreg_bob>;
-+ vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
-+ vdd_l4_l6-supply = <&vreg_bob>;
-+ vdd_bob-supply = <&vph_pwr>;
-+
-+ vreg_s2b_1p05: s2 {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1050000>;
-+ regulator-enable-ramp-delay = <200>;
-+ regulator-ramp-delay = <0>;
-+ };
-+
-+ vreg_l1b_0p925: l1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <925000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l2b_2p95: l2 {
-+ regulator-min-microvolt = <1648000>;
-+ regulator-max-microvolt = <3100000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l4b_2p95: l4 {
-+ regulator-min-microvolt = <2944000>;
-+ regulator-max-microvolt = <2952000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+
-+ regulator-min-microamp = <200>;
-+ regulator-max-microamp = <600000>;
-+ regulator-system-load = <570000>;
-+ regulator-allow-set-load;
-+ };
-+
-+ /*
-+ * Downstream specifies a range of 1721-3600mV,
-+ * but the only assigned consumers are SDHCI2 VMMC
-+ * and Coresight QPDI that both request pinned 2.95V.
-+ * Tighten the range to 1.8-3.328 (closest to 3.3) to
-+ * make the mmc driver happy.
-+ */
-+ vreg_l5b_2p95: l5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3328000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-system-load = <800000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-allow-set-load;
-+ };
-+
-+ vreg_l7b_3p125: l7 {
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3125000>;
-+ regulator-enable-ramp-delay = <250>;
-+ };
-+
-+ vreg_l8b_3p3: l8 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <3400000>;
-+ regulator-enable-ramp-delay = <250>;
-+ regulator-ramp-delay = <0>;
-+ };
-+
-+ vreg_bob: bob {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3624000>;
-+ regulator-enable-ramp-delay = <500>;
-+ regulator-ramp-delay = <0>;
-+ };
-+ };
-+};
-+
-+&sdc2_state_on {
-+ sd-cd {
-+ pins = "gpio54";
-+ bias-pull-up;
-+ drive-strength = <2>;
-+ };
-+};
-+
-+&sdc2_state_off {
-+ sd-cd {
-+ pins = "gpio54";
-+ bias-disable;
-+ drive-strength = <2>;
-+ };
-+};
-+
-+&sdhc_1 {
-+ status = "okay";
-+ supports-cqe;
-+
-+ vmmc-supply = <&vreg_l4b_2p95>;
-+ vqmmc-supply = <&vreg_l8a_1p8>;
-+
-+ mmc-ddr-1_8v;
-+ mmc-hs400-1_8v;
-+ mmc-hs400-enhanced-strobe;
-+};
-+
-+&sdhc_2 {
-+ status = "okay";
-+
-+ vmmc-supply = <&vreg_l5b_2p95>;
-+ vqmmc-supply = <&vreg_l2b_2p95>;
-+
-+ cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
-+ no-sdio;
-+ no-emmc;
-+};
-+
-+&tlmm {
-+ gpio-reserved-ranges = <0 4>, <8 4>;
-+};
-+
-+&usb2 {
-+ status = "okay";
-+};
-+
-+&usb2_dwc3 {
-+ dr_mode = "host";
-+};
-+
-+&usb3 {
-+ status = "okay";
-+};
-+
-+&usb3_dwc3 {
-+ dr_mode = "peripheral";
-+ extcon = <&extcon_usb>;
-+};
---
-2.35.1
-
projects / thirdparty / kernel / stable-queue.git / commitdiff
