#
# The simulator's configure.in should look like:
#
-# dnl Process this file with `autoconf -l ../common' to produce a configure script.
+# dnl Process this file with autoconf to produce a configure script.
+# sinclude(../common/aclocal.m4)
# AC_PREREQ(2.5)dnl
# AC_INIT(Makefile.in)
+#
# SIM_AC_COMMON
#
# ... target specific stuff ...
AC_ARG_PROGRAM
AC_PROG_CC
AC_PROG_INSTALL
-AC_C_BIGENDIAN
# Put a plausible default for CC_FOR_BUILD in Makefile.
AC_C_CROSS
dnl Do not add similar but different options to a particular simulator,
dnl all shall eventually behave the same way.
+
+dnl This is a generic option to enable special byte swapping
+dnl insns on *any* cpu.
+AC_ARG_ENABLE(sim-bswap,
+[ --enable-sim-bswap Use Host specific BSWAP instruction.],
+[case "${enableval}" in
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ no) sim_bswap="-DWITH_BSWAP=0";;
+ *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+ echo "Setting bswap flags = $sim_bswap" 6>&1
+fi],[sim_bswap=""])dnl
+AC_SUBST(sim_bswap)
+
+
AC_ARG_ENABLE(sim-cflags,
[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
[case "${enableval}" in
fi],[sim_cflags=""])dnl
AC_SUBST(sim_cflags)
+
dnl --enable-sim-debug is for developers of the simulator
dnl the allowable values are work-in-progress
AC_ARG_ENABLE(sim-debug,
fi],[sim_debug=""])dnl
AC_SUBST(sim_debug)
+
dnl --enable-sim-trace is for users of the simulator
dnl the allowable values are work-in-progress
AC_ARG_ENABLE(sim-trace,
fi],[sim_trace=""])dnl
AC_SUBST(sim_trace)
-dnl This is a generic option to enable special byte swapping
-dnl insns on *any* cpu.
-AC_ARG_ENABLE(sim-bswap,
-[ --enable-sim-bswap Use Host specific BSWAP instruction.],
-[case "${enableval}" in
- yes) sim_bswap="-DUSE_BSWAP";;
- no) sim_bswap="";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
-AC_SUBST(sim_bswap)
dnl These are available to append to as desired.
sim_link_files=
sim_link_files=../common/tconfig.in
fi
+# targ-vals.def points to the libc macro description file.
case "${target}" in
-*-*-*)
- sim_link_files="${sim_link_files} ../common/nltvals.def"
- sim_link_links="${sim_link_links} targ-vals.def"
- ;;
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
]) dnl End of SIM_AC_COMMON
-dnl Generate the Makefile in a target specific directory.
-dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
-dnl so this is a cover macro to tuck the details away of how we cope.
-dnl It also inserts default definitions of the SIM_FOO variables.
-AC_DEFUN(SIM_AC_OUTPUT,
+dnl Almost standard simulator options.
+dnl Eventually all simulators will support these.
+
+
+dnl --enable-sim-endian={yes,no,big,little} is for simulators
+dnl that support both big and little endian targets.
+AC_DEFUN(SIM_AC_OPTION_ENDIAN,
[
+default_sim_endian="ifelse([$1],,,-DWITH_TARGET_BYTE_ORDER=[$1])"
+AC_ARG_ENABLE(sim-endian,
+[ --enable-sim-endian=endian Specify target byte endian orientation.],
+[case "${enableval}" in
+ yes) case "$target" in
+ *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+ *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
+ esac;;
+ no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+ echo "Setting endian flags = $sim_endian" 6>&1
+fi],[sim_endian="${default_sim_endian}"])dnl
+])
-dnl Stuff that gets inserted into the Makefile.
-dnl This is done now and not in SIM_AC_COMMON to catch updated values for
-dnl LIBS, etc. that may get changed by target specific checks.
-
-COMMON_MAKEFILE_FRAG=makefile-temp-$$
-cat > $COMMON_MAKEFILE_FRAG <<EOF
-VPATH = ${srcdir}
-srcdir = ${srcdir}
-srcroot = \$(srcdir)/../..
-
-prefix = ${prefix}
-exec_prefix = ${exec_prefix}
-
-host_alias = ${host_alias}
-target_alias = ${target_alias}
-program_transform_name = ${program_transform_name}
-bindir = ${bindir}
-
-libdir = ${libdir}
-tooldir = \$(libdir)/\$(target_alias)
-
-datadir = ${datadir}
-mandir = ${mandir}
-man1dir = \$(mandir)/man1
-infodir = ${infodir}
-includedir = ${includedir}
-
-SHELL = /bin/sh
-
-INSTALL = \$(srcroot)/install.sh -c
-INSTALL_PROGRAM = ${INSTALL_PROGRAM}
-INSTALL_DATA = ${INSTALL_DATA}
-INSTALL_XFORM = \$(INSTALL) -t='\$(program_transform_name)'
-INSTALL_XFORM1= \$(INSTALL_XFORM) -b=.1
-
-CC = ${CC}
-CC_FOR_BUILD = ${CC_FOR_BUILD}
-CFLAGS = ${CFLAGS}
-SIM_CFLAGS = ${sim_cflags}
-SIM_DEBUG = ${sim_debug}
-SIM_TRACE = ${sim_trace}
-SIM_BSWAP = ${sim_bswap}
-
-HDEFINES = ${HDEFINES}
-TDEFINES =
-
-AR = ${AR}
-AR_FLAGS = rc
-RANLIB = ${RANLIB}
-MAKEINFO = makeinfo
-
-# Each simulator's Makefile.in defines one or more of these variables
-# as necessary. The SIM_AC_OUTPUT macro then inserts those values
-# at '## Config'.
-
-# List of object files, less common parts.
-#SIM_OBJS =
-# List of flags to always pass to \$(CC).
-#SIM_EXTRA_CFLAGS =
-# List of extra libraries to link with.
-#SIM_EXTRA_LIBS =
-# List of extra program dependencies.
-#SIM_EXTRA_LIBDEPS =
-# Dependency of 'all' to build any extra files.
-#SIM_EXTRA_ALL =
-# Dependency of 'install' to install any extra files.
-#SIM_EXTRA_INSTALL =
-# Dependency of 'clean' to clean any extra files.
-#SIM_EXTRA_CLEAN =
-
-CONFIG_CFLAGS = ${DEFS} \$(SIM_CFLAGS) \$(SIM_DEBUG) \$(SIM_TRACE) \$(SIM_BSWAP) \
- \$(SIM_EXTRA_CFLAGS) \$(HDEFINES) \$(TDEFINES)
-CSEARCH = -I. -I\$(srcdir) -I../common -I\$(srcdir)/../common \
- -I../../include -I\$(srcroot)/include \
- -I../../bfd -I\$(srcroot)/bfd -I\$(srcroot)/gdb \
- -I../../opcodes -I\$(srcroot)/opcodes
-ALL_CFLAGS = \$(CONFIG_CFLAGS) \$(CSEARCH) \$(CFLAGS)
-BUILD_CFLAGS = -g -O \$(CSEARCH)
-
-.NOEXPORT:
-MAKEOVERRIDES=
-
-LIBIBERTY_LIB = ../../libiberty/libiberty.a
-BFD_LIB = ../../bfd/libbfd.a
-OPCODES_LIB = ../../opcodes/libopcodes.a
-CONFIG_LIBS = ${LIBS}
-LIBDEPS = \$(BFD_LIB) \$(OPCODES_LIB) \$(LIBIBERTY_LIB) \
- \$(SIM_EXTRA_LIBDEPS)
-EXTRA_LIBS = \$(BFD_LIB) \$(OPCODES_LIB) \$(LIBIBERTY_LIB) \
- \$(CONFIG_LIBS) \$(SIM_EXTRA_LIBS)
-
-LIB_OBJS = callback.o targ-map.o \$(SIM_OBJS)
-
-all: run libsim.a \$(SIM_EXTRA_ALL)
-
-libsim.a: \$(LIB_OBJS)
- rm -f libsim.a
- \$(AR) \$(ARFLAGS) libsim.a \$(LIB_OBJS)
- \$(RANLIB) libsim.a
-
-run: run.o libsim.a \$(LIBDEPS)
- \$(CC) \$(ALL_CFLAGS) -o run \
- run.o libsim.a \$(EXTRA_LIBS)
-
-run.o: \$(srcdir)/../common/run.c config.h tconfig.h \
- \$(srcroot)/include/callback.h
- \$(CC) -c \$(srcdir)/../common/run.c \$(ALL_CFLAGS)
-
-callback.o: \$(srcdir)/../common/callback.c config.h tconfig.h \
- \$(srcroot)/include/callback.h targ-vals.h
- \$(CC) -c \$(srcdir)/../common/callback.c \$(ALL_CFLAGS)
-
-gentmap: \$(srcdir)/../common/gentmap.c targ-vals.def
- \$(CC_FOR_BUILD) \$(srcdir)/../common/gentmap.c -o gentmap \$(BUILD_CFLAGS) -I\$(srcdir)/../common
-
-targ-vals.h: gentmap
- rm -f targ-vals.h
- ./gentmap -h >targ-vals.h
-
-targ-map.c: gentmap
- rm -f targ-map.c
- ./gentmap -c >targ-map.c
-
-install: install-common \$(SIM_EXTRA_INSTALL)
-
-install-common:
- \$(INSTALL_XFORM) run \$(bindir)/run
-
-check:
-
-info:
-clean-info:
-install-info:
-
-tags etags: TAGS
-
-TAGS: force
- etags *.c *.h
-
-clean: \$(SIM_EXTRA_CLEAN)
- rm -f *.[[oa]] *~ core gentmap targ-map.c targ-vals.h
- rm -f run libsim.a
-distclean mostlyclean maintainer-clean realclean: clean
- rm -f TAGS
- rm -f Makefile config.cache config.log config.status
- rm -f tconfig.h config.h stamp-h targ-vals.def
-
-.c.o:
- \$(CC) -c \$(ALL_CFLAGS) \$<
+dnl --enable-sim-hostendian is for users of the simulator when
+dnl they find that AC_C_BIGENDIAN does not function correctly
+dnl (for instance in a canadian cross)
+AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN,
+[
+AC_ARG_ENABLE(sim-hostendian,
+[ --enable-sim-hostendain=end Specify host byte endian orientation.],
+[case "${enableval}" in
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+ echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi],[
+if test "x$cross_compiling" = "xno"; then
+ AC_C_BIGENDIAN
+ if test $ac_cv_c_bigendian = yes; then
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ fi
+else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi])dnl
+])
+
-# Dummy target to force execution of dependent targets.
-force:
+dnl --enable-sim-inline is for users that wish to ramp up the simulator's
+dnl performance by inlining functions.
+AC_DEFUN(SIM_AC_OPTION_INLINE,
+[
+default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
+AC_ARG_ENABLE(sim-inline,
+[ --enable-sim-inline=inlines Specify which functions should be inlined.],
+[sim_inline=""
+case "$enableval" in
+ no) sim_inline="-DDEFAULT_INLINE=0";;
+ 0) sim_inline="-DDEFAULT_INLINE=0";;
+ yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";;
+ 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
+ *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ new_flag=""
+ case "$x" in
+ *_INLINE=*) new_flag="-D$x";;
+ *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
+ *_INLINE) new_flag="-D$x=ALL_INLINE";;
+ *) new_flag="-D$x""_INLINE=ALL_INLINE";;
+ esac
+ if test x"$sim_inline" = x""; then
+ sim_inline="$new_flag"
+ else
+ sim_inline="$sim_inline $new_flag"
+ fi
+ done;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+fi],[if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
+ sim_inline="${default_sim_inline}"
+ if test x"$silent" != x"yes"; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+ fi
+else
+ sim_inline=""
+fi])dnl
+])
-Makefile: Makefile.in config.status
- CONFIG_HEADERS= \$(SHELL) ./config.status
-config.status: configure
- \$(SHELL) ./config.status --recheck
+dnl --enable-sim-warnings is for developers of the simulator.
+dnl it enables extra GCC specific warnings.
+AC_DEFUN(SIM_AC_OPTION_WARNINGS,
+[
+AC_ARG_ENABLE(sim-warnings,
+[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o],
+[case "${enableval}" in
+ yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
+ no) sim_warnings="-w";;
+ *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
+ echo "Setting warning flags = $sim_warnings" 6>&1
+fi],[sim_warnings=""])dnl
+])
-config.h: stamp-h ; @true
-stamp-h: config.in config.status
- CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \$(SHELL) ./config.status
-# We can't add dependencies to configure because it causes too much trouble
-# to end users if configure's timestamp is out of sync.
-.PHONY: run-autoconf
-run-autoconf:
- cd \$(srcdir) && autoconf -l ../common
-EOF
-dnl end of COMMON_MAKEFILE_FRAG
-AC_SUBST_FILE(COMMON_MAKEFILE_FRAG)
+dnl Generate the Makefile in a target specific directory.
+dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
+dnl so this is a cover macro to tuck the details away of how we cope.
+dnl We cope by having autoconf generate two files and then merge them into
+dnl one afterwards. The two pieces of the common fragment are inserted into
+dnl the target's fragment at the appropriate points.
+AC_DEFUN(SIM_AC_OUTPUT,
+[
+dnl Optional options
+AC_SUBST(sim_endian)
+AC_SUBST(sim_hostendian)
+AC_SUBST(sim_inline)
+AC_SUBST(sim_warnings)
+dnl
AC_LINK_FILES($sim_link_files, $sim_link_links)
- AC_OUTPUT(Makefile,[
+AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in,
+[case "x$CONFIG_FILES" in xMakefile*)
+ echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ -e '/^## COMMON_POST_/ r Makesim2.tmp' \
+ <Makefile.sim >Makefile
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
+ ;;
+ esac
case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
- ])
-
-rm $COMMON_MAKEFILE_FRAG
-
-])dnl End of SIM_AC_OUTPUT
+])
+])
--- /dev/null
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.10
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-sim-bswap Use Host specific BSWAP instruction."
+ac_help="$ac_help
+ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator"
+ac_help="$ac_help
+ --enable-sim-debug=opts Enable debugging flags"
+ac_help="$ac_help
+ --enable-sim-trace=opts Enable tracing flags"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+
+ac_prev=
+for ac_option
+do
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir="$ac_optarg" ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [same as prefix]
+ --bindir=DIR user executables in DIR [EPREFIX/bin]
+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data in DIR
+ [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data in DIR
+ [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+ --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+ --includedir=DIR C header files in DIR [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+ --infodir=DIR info documentation in DIR [PREFIX/info]
+ --mandir=DIR man documentation in DIR [PREFIX/man]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM
+ run sed PROGRAM on installed program names
+EOF
+ cat << EOF
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+EOF
+ if test -n "$ac_help"; then
+ echo "--enable and --with options recognized:$ac_help"
+ fi
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir="$ac_optarg" ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir="$ac_optarg" ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir="$ac_optarg" ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir="$ac_optarg" ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir="$ac_optarg" ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir="$ac_optarg" ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir="$ac_optarg" ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir="$ac_optarg" ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.10"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
+
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
+done
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=Makefile.in
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+# This is intended for use by the target specific directories, and by us.
+
+# autoconf.info says this should be called right after AC_INIT.
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`$ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`$ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`$ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`$ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ ac_prog_rejected=no
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_gcc_g=yes
+else
+ ac_cv_prog_gcc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall installbsd scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_ifs"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 847 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+ ac_cv_c_cross=no
+else
+ ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
+
+if test "x$cross_compiling" = "xno"; then
+ CC_FOR_BUILD='$(CC)'
+else
+ CC_FOR_BUILD=gcc
+fi
+
+
+
+
+AR=${AR-ar}
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+. ${srcdir}/../../bfd/configure.host
+
+
+
+# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
+if test "${enable_sim_bswap+set}" = set; then
+ enableval="$enable_sim_bswap"
+ case "${enableval}" in
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ no) sim_bswap="-DWITH_BSWAP=0";;
+ *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+ echo "Setting bswap flags = $sim_bswap" 6>&1
+fi
+else
+ sim_bswap=""
+fi
+
+
+
+# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
+if test "${enable_sim_cflags+set}" = set; then
+ enableval="$enable_sim_cflags"
+ case "${enableval}" in
+ yes) sim_cflags="-O2";;
+ trace) { echo "configure: error: "Please use --enable-sim-debug instead."" 1>&2; exit 1; }; sim_cflags="";;
+ no) sim_cflags="";;
+ *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
+ echo "Setting sim cflags = $sim_cflags" 6>&1
+fi
+else
+ sim_cflags=""
+fi
+
+
+
+# Check whether --enable-sim-debug or --disable-sim-debug was given.
+if test "${enable_sim_debug+set}" = set; then
+ enableval="$enable_sim_debug"
+ case "${enableval}" in
+ yes) sim_debug="-DDEBUG=7";;
+ no) sim_debug="-DDEBUG=0";;
+ *) sim_debug="-DDEBUG='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
+ echo "Setting sim debug = $sim_debug" 6>&1
+fi
+else
+ sim_debug=""
+fi
+
+
+
+# Check whether --enable-sim-trace or --disable-sim-trace was given.
+if test "${enable_sim_trace+set}" = set; then
+ enableval="$enable_sim_trace"
+ case "${enableval}" in
+ yes) sim_trace="-DTRACE=1";;
+ no) sim_trace="-DTRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
+ echo "Setting sim trace = $sim_trace" 6>&1
+fi
+else
+ sim_trace=""
+fi
+
+
+
+sim_link_files=
+sim_link_links=
+
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+ sim_link_files=tconfig.in
+else
+ sim_link_files=../common/tconfig.in
+fi
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+
+
+# Put a useful copy of CPP_FOR_TARGET in Makefile.
+# This is only used to build the target values header files. These files are
+# shipped with distributions so CPP_FOR_TARGET only needs to work in
+# developer's trees. This value is borrowed from ../../Makefile.in.
+CPP_FOR_TARGET="\` \
+ if test -f \$\${rootme}/../../gcc/Makefile ; then \
+ if test -f \$\${rootme}/../../\$(TARGET_SUBDIR)/newlib/Makefile ; then \
+ echo \$\${rootme}/../../gcc/xgcc -B\$\${rootme}/../../gcc/ -idirafter \$\${rootme}/../../\$(TARGET_SUBDIR)/newlib/targ-include -idirafter \$(srcroot)/newlib/libc/include -nostdinc; \
+ else \
+ echo \$\${rootme}/../../gcc/xgcc -B\$\${rootme}/../../gcc/; \
+ fi; \
+ else \
+ if test '\$(host_canonical)' = '\$(target_canonical)' ; then \
+ echo \$(CC); \
+ else \
+ t='\$(program_transform_name)'; echo gcc | sed -e 's/x/x/' \$\$t; \
+ fi; \
+ fi\` -E"
+
+
+# Set TARGET_SUBDIR, needed by CPP_FOR_TARGET.
+if test x"${host}" = x"${target}" ; then
+ TARGET_SUBDIR="."
+else
+ TARGET_SUBDIR=${target_alias}
+fi
+
+
+# These aren't all needed yet, but will be eventually.
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1041 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1056 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+for ac_hdr in stdlib.h string.h strings.h time.h sys/times.h
+do
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1090 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@CC@%$CC%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
+s%@HDEFINES@%$HDEFINES%g
+s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
+s%@sim_bswap@%$sim_bswap%g
+s%@sim_cflags@%$sim_cflags%g
+s%@sim_debug@%$sim_debug%g
+s%@sim_trace@%$sim_trace%g
+s%@CPP_FOR_TARGET@%$CPP_FOR_TARGET%g
+s%@TARGET_SUBDIR@%$TARGET_SUBDIR%g
+s%@CPP@%$CPP%g
+
+CEOF
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust relative srcdir, etc. for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+fi; done
+rm -f conftest.subs
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='\([ ]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ echo creating $ac_file
+
+ rm -f conftest.frag conftest.in conftest.out
+ cp $ac_given_srcdir/$ac_file_in conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h. And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
+
+rm -f conftest.tail
+while :
+do
+ ac_lines=`grep -c . conftest.vals`
+ # grep -c gives empty output for an empty file on some AIX systems.
+ if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+ # Write a limited-size here document to conftest.frag.
+ echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+ echo 'CEOF
+ sed -f conftest.frag conftest.in > conftest.out
+ rm -f conftest.in
+ mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+ rm -f conftest.vals
+ mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+ rm -f conftest.frag conftest.h
+ echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
+ cat conftest.in >> conftest.h
+ rm -f conftest.in
+ if cmp -s $ac_file conftest.h 2>/dev/null; then
+ echo "$ac_file is unchanged"
+ rm -f conftest.h
+ else
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ fi
+ rm -f $ac_file
+ mv conftest.h $ac_file
+ fi
+fi; done
+
+
+case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
--- /dev/null
+/* This file is part of the program psim.
+
+ Copyright (C) 1994-1997, Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#ifndef _SIM_CORE_C_
+#define _SIM_CORE_C_
+
+#include "engine.h"
+
+
+INLINE_SIM_CORE\
+(void)
+core_init(engine *system)
+{
+ core *memory = &system->memory;
+ core_maps map;
+ for (map = 0;
+ map < nr_core_maps;
+ map++) {
+ /* blow away old mappings */
+ core_mapping *curr = memory->map[map].first;
+ while (curr != NULL) {
+ core_mapping *tbd = curr;
+ curr = curr->next;
+ if (tbd->free_buffer) {
+ ASSERT(tbd->buffer != NULL);
+ zfree(tbd->buffer);
+ }
+ zfree(tbd);
+ }
+ memory->map[map].first = NULL;
+ }
+}
+
+
+
+STATIC_INLINE_SIM_CORE\
+(core_mapping *)
+new_core_mapping(engine *system,
+ attach_type attach,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ device *device,
+ void *buffer,
+ int free_buffer)
+{
+ core_mapping *new_mapping = ZALLOC(core_mapping);
+ /* common */
+ new_mapping->level = attach;
+ new_mapping->space = space;
+ new_mapping->base = addr;
+ new_mapping->nr_bytes = nr_bytes;
+ new_mapping->bound = addr + (nr_bytes - 1);
+ if (attach == attach_raw_memory) {
+ new_mapping->buffer = buffer;
+ new_mapping->free_buffer = free_buffer;
+ }
+ else if (attach >= attach_callback) {
+ new_mapping->device = device;
+ }
+ else {
+ engine_error(system, "new_core_mapping - internal error - unknown attach type %d\n",
+ attach);
+ }
+ return new_mapping;
+}
+
+
+STATIC_INLINE_SIM_CORE\
+(void)
+core_map_attach(engine *system,
+ core_map *access_map,
+ attach_type attach,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes, /* host limited */
+ device *client, /*callback/default*/
+ void *buffer, /*raw_memory*/
+ int free_buffer) /*raw_memory*/
+{
+ /* find the insertion point for this additional mapping and then
+ insert */
+ core_mapping *next_mapping;
+ core_mapping **last_mapping;
+
+ ASSERT((attach >= attach_callback && client != NULL && buffer == NULL && !free_buffer)
+ || (attach == attach_raw_memory && client == NULL && buffer != NULL));
+
+ /* actually do occasionally get a zero size map */
+ if (nr_bytes == 0) {
+#if (WITH_DEVICES)
+ device_error(client, "called on core_map_attach with size zero");
+#else
+ engine_error(system, "called on core_map_attach with size zero");
+#endif
+ }
+
+ /* find the insertion point (between last/next) */
+ next_mapping = access_map->first;
+ last_mapping = &access_map->first;
+ while(next_mapping != NULL
+ && (next_mapping->level < attach
+ || (next_mapping->level == attach
+ && next_mapping->bound < addr))) {
+ /* provided levels are the same */
+ /* assert: next_mapping->base > all bases before next_mapping */
+ /* assert: next_mapping->bound >= all bounds before next_mapping */
+ last_mapping = &next_mapping->next;
+ next_mapping = next_mapping->next;
+ }
+
+ /* check insertion point correct */
+ ASSERT(next_mapping == NULL || next_mapping->level >= attach);
+ if (next_mapping != NULL && next_mapping->level == attach
+ && next_mapping->base < (addr + (nr_bytes - 1))) {
+#if (WITH_DEVICES)
+ device_error(client, "map overlap when attaching %d:0x%lx (%ld)",
+ space, (long)addr, (long)nr_bytes);
+#else
+ engine_error(system, "map overlap when attaching %d:0x%lx (%ld)",
+ space, (long)addr, (long)nr_bytes);
+#endif
+ }
+
+ /* create/insert the new mapping */
+ *last_mapping = new_core_mapping(system,
+ attach,
+ space, addr, nr_bytes,
+ client, buffer, free_buffer);
+ (*last_mapping)->next = next_mapping;
+}
+
+
+INLINE_SIM_CORE\
+(void)
+core_attach(engine *system,
+ attach_type attach,
+ access_type access,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes, /* host limited */
+ device *client,
+ void *optional_buffer)
+{
+ core *memory = &system->memory;
+ core_maps map;
+ void *buffer;
+ int buffer_freed;
+ if ((access & access_read_write_exec) == 0
+ || (access & ~access_read_write_exec) != 0) {
+#if (WITH_DEVICES)
+ device_error(client, "invalid access for core attach");
+#else
+ engine_error(system, "invalid access for core attach");
+#endif
+ }
+ /* verify the attach type */
+ if (attach == attach_raw_memory) {
+ if (optional_buffer == NULL) {
+ buffer = zalloc(nr_bytes);
+ buffer_freed = 0;
+ }
+ else {
+ buffer = optional_buffer;
+ buffer_freed = 1;
+ }
+ }
+ else if (attach >= attach_callback) {
+ buffer = NULL;
+ buffer_freed = 1;
+ }
+ else {
+#if (WITH_DEVICES)
+ device_error(client, "core_attach - conflicting buffer and attach arguments");
+#else
+ engine_error(system, "core_attach - conflicting buffer and attach arguments");
+#endif
+ buffer = NULL;
+ buffer_freed = 1;
+ }
+ /* attach the region to all applicable access maps */
+ for (map = 0;
+ map < nr_core_maps;
+ map++) {
+ switch (map) {
+ case core_read_map:
+ if (access & access_read)
+ core_map_attach(system, &memory->map[map],
+ attach,
+ space, addr, nr_bytes,
+ client, buffer, !buffer_freed);
+ buffer_freed ++;
+ break;
+ case core_write_map:
+ if (access & access_write)
+ core_map_attach(system, &memory->map[map],
+ attach,
+ space, addr, nr_bytes,
+ client, buffer, !buffer_freed);
+ buffer_freed ++;
+ break;
+ case core_execute_map:
+ if (access & access_exec)
+ core_map_attach(system, &memory->map[map],
+ attach,
+ space, addr, nr_bytes,
+ client, buffer, !buffer_freed);
+ buffer_freed ++;
+ break;
+ case nr_core_maps:
+ engine_error(system, "core_attach - internal error - bad switch");
+ break;
+ }
+ }
+}
+
+
+STATIC_INLINE_SIM_CORE\
+(core_mapping *)
+core_map_find_mapping(engine *system,
+ core_maps map,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ int abort) /*either 0 or 1 - helps inline */
+{
+ core_mapping *mapping = system->memory.map[map].first;
+ ASSERT((addr & (nr_bytes - 1)) == 0); /* must be aligned */
+ ASSERT((addr + (nr_bytes - 1)) >= addr); /* must not wrap */
+ while (mapping != NULL) {
+ if (addr >= mapping->base
+ && (addr + (nr_bytes - 1)) <= mapping->bound)
+ return mapping;
+ mapping = mapping->next;
+ }
+ if (abort)
+ engine_error(system, "access to unmaped address 0x%x (%d bytes)\n",
+ addr, nr_bytes);
+ return NULL;
+}
+
+
+STATIC_INLINE_SIM_CORE\
+(void *)
+core_translate(core_mapping *mapping,
+ unsigned_word addr)
+{
+ return (void *)(((char *)mapping->buffer) + addr - mapping->base);
+}
+
+
+INLINE_SIM_CORE\
+(unsigned)
+core_map_read_buffer(engine *system,
+ core_maps map,
+ void *buffer,
+ unsigned_word addr,
+ unsigned len)
+{
+ unsigned count = 0;
+ while (count < len) {
+ unsigned_word raddr = addr + count;
+ core_mapping *mapping =
+ core_map_find_mapping(system, map,
+ raddr, 1,
+ 0); /*dont-abort*/
+ if (mapping == NULL)
+ break;
+#if (WITH_DEVICES)
+ if (mapping->device != NULL) {
+ int nr_bytes = len - count;
+ if (raddr + nr_bytes - 1> mapping->bound)
+ nr_bytes = mapping->bound - raddr + 1;
+ if (device_io_read_buffer(mapping->device,
+ (unsigned_1*)buffer + count,
+ mapping->space,
+ raddr,
+ nr_bytes) != nr_bytes)
+ break;
+ count += nr_bytes;
+ }
+ else
+#endif
+ {
+ ((unsigned_1*)buffer)[count] =
+ *(unsigned_1*)core_translate(mapping, raddr);
+ count += 1;
+ }
+ }
+ return count;
+}
+
+
+INLINE_SIM_CORE\
+(unsigned)
+core_map_write_buffer(engine *system,
+ core_maps map,
+ const void *buffer,
+ unsigned_word addr,
+ unsigned len)
+{
+ unsigned count = 0;
+ while (count < len) {
+ unsigned_word raddr = addr + count;
+ core_mapping *mapping = core_map_find_mapping(system, map,
+ raddr, 1,
+ 0); /*dont-abort*/
+ if (mapping == NULL)
+ break;
+#if (WITH_DEVICES)
+ if (WITH_CALLBACK_MEMORY
+ && mapping->device != NULL) {
+ int nr_bytes = len - count;
+ if (raddr + nr_bytes - 1 > mapping->bound)
+ nr_bytes = mapping->bound - raddr + 1;
+ if (device_io_write_buffer(mapping->device,
+ (unsigned_1*)buffer + count,
+ mapping->space,
+ raddr,
+ nr_bytes) != nr_bytes)
+ break;
+ count += nr_bytes;
+ }
+ else
+#endif
+ {
+ *(unsigned_1*)core_translate(mapping, raddr) =
+ ((unsigned_1*)buffer)[count];
+ count += 1;
+ }
+ }
+ return count;
+}
+
+
+/* define the read/write 1/2/4/8/word functions */
+
+#define N 1
+#include "sim-n-core.h"
+#undef N
+
+#define N 2
+#include "sim-n-core.h"
+#undef N
+
+#define N 4
+#include "sim-n-core.h"
+#undef N
+
+#define N 8
+#include "sim-n-core.h"
+#undef N
+
+#define N word
+#include "sim-n-core.h"
+#undef N
+
+#endif
projects / thirdparty / binutils-gdb.git / commitdiff
