AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+
AC_REQUIRE([AC_PROG_LN_S])dnl
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SHELL \
+ for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
# A BSD-compatible nm program.
NM=$lt_NM
+# A sed program that does not truncate output.
+SED=$lt_SED
+
# A symbol stripping program
STRIP=$STRIP
AC_DEFUN([LT_AC_PROG_RC],
[AC_CHECK_TOOL(RC, windres, no)
])
+
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+
+ # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=$TMPDIR/sed$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+ { (exit 1); exit 1; }
+}
+ _max=0
+ _count=0
+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+ # along with /bin/sed that truncates output.
+ for _sed in $_sed_list /usr/xpg4/bin/sed; do
+ test ! -f ${_sed} && break
+ cat /dev/null > "$tmp/sed.in"
+ _count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in"
+ # Check for GNU sed and select it if it is found.
+ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null;
+then
+ lt_cv_path_SED=${_sed}
+ break;
+ fi
+ while true; do
+ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+ mv "$tmp/sed.tmp" "$tmp/sed.in"
+ cp "$tmp/sed.in" "$tmp/sed.nl"
+ echo >>"$tmp/sed.nl"
+ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+ # 10000 chars as input seems more than enough
+ test $_count -gt 10 && break
+ _count=`expr $_count + 1`
+ if test $_count -gt $_max; then
+ _max=$_count
+ lt_cv_path_SED=$_sed
+ fi
+ done
+ done
+ rm -rf "$tmp"
+])
+AC_MSG_RESULT([$SED])
+])
fi
# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
+progname=`$echo "$0" | ${SED} 's%^.*/%%'`
modename="$progname"
# Constants.
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
SP2NL='tr \040 \012'
NL2SP='tr \015\012 \040\040'
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
taglist="$taglist $tagname"
# Evaluate the configuration.
- eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
else
echo "$progname: ignoring unknown tag $tagname" 1>&2
fi
;;
--config)
- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
# Now print the configurations for the tags.
for tagname in $taglist; do
- sed -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
+ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
done
exit 0
;;
for z in $available_tags; do
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
# Evaluate the configuration.
- eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
case "$base_compile " in
"$CC "*)
# The compiler in the base compile command matches
# A libtool-controlled object.
# Check to see that this really is a libtool object.
- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
pic_object=
non_pic_object=
# A libtool-controlled object.
# Check to see that this really is a libtool object.
- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
pic_object=
non_pic_object=
for z in $available_tags; do
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
# Evaluate the configuration.
- eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
case $base_compile in
"$CC "*)
# The compiler in $compile_command matches
fi
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
# Make a new name for the extract_expsyms_cmds to use
soroot="$soname"
- soname=`echo $soroot | sed -e 's/^.*\///'`
- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+ soname=`echo $soroot | ${SED} -e 's/^.*\///'`
+ newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
if grep "^installed=no" $deplib > /dev/null; then
path="-L$absdir/$objdir"
else
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit 1
# Eliminate all temporary directories.
for path in $notinst_path; do
- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+ lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+ deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+ dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
done
if test -n "$xrpath"; then
# but so what?
potlib="$potent_lib"
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
break 2
fi
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | sed 10q \
+ | ${SED} 10q \
| egrep "$file_magic_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
if eval echo \"$potent_lib\" 2>/dev/null \
- | sed 10q \
+ | ${SED} 10q \
| egrep "$match_pattern_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
prog)
case $host in
- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+ *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
esac
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
if test -z "$export_symbols"; then
export_symbols="$output_objdir/$output.exp"
$run $rm $export_symbols
- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+ $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
$run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
for arg in $dlprefiles; do
$show "extracting global C symbols from \`$arg'"
- name=`echo "$arg" | sed -e 's%^.*/%%'`
+ name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
$run eval 'echo ": $name " >> "$nlist"'
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
done
# win32 will think the script is a binary if it has
# a .exe suffix, so we strip it off here.
case $output in
- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+ *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
esac
# test for cygwin because mv fails w/o .exe extensions
case $host in
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# The HP-UX ksh and POSIX shell print the target directory to stdout
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
while test -n \"\$file\"; do
destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
fi
file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
done
# Try to get the absolute directory name.
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
oldobjs="$libobjs_save"
build_libtool_libs=no
else
- oldobjs="$objs$old_deplibs $non_pic_objects"
+ oldobjs="$oldobjs$old_deplibs $non_pic_objects"
fi
addlibs="$old_convenience"
fi
case $deplib in
*.la)
name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit 1
newdlfiles=
for lib in $dlfiles; do
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
newdlprefiles=
for lib in $dlprefiles; do
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
*.la)
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
# Do a test to see if this is really a libtool program.
case $host in
*cygwin*|*mingw*)
- wrapper=`echo $file | sed -e 's,.exe$,,'`
+ wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
;;
*)
wrapper=$file
;;
esac
- if (sed -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+ if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
notinst_deplibs=
relink_command=
destfile=$destfile.exe
;;
*:*.exe)
- destfile=`echo $destfile | sed -e 's,.exe$,,'`
+ destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
;;
esac
;;
case $file in
*.la)
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
-*) ;;
*)
# Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# If there is no directory component, then add one.
case $file in
*/* | *\\*) . $file ;;
case $name in
*.la)
# Possibly a libtool archive, so verify it.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
. $dir/$name
# Delete the libtool libraries and symlinks.
*.lo)
# Possibly a libtool object, so verify it.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# Read the .lo file
. $dir/$name
*)
# Do a test to see if this is a libtool program.
if test "$mode" = clean &&
- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
relink_command=
. $dir/$file
projects / thirdparty / libtool.git / commitdiff
