riscv: dts: sophgo: Enable SPI NOR node for PioneerBox

Enable SPI NOR node for PioneerBox device tree

According to PioneerBox schematic, SPI-NOR Flash cannot support QSPI
due to hardware design. Thus spi-(tx|rx)-bus-width must be set to 1.

Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Link: https://lore.kernel.org/r/20250916-sfg-spidts-v2-2-b5d9024fe1c8@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>

diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index c4d5f8d7d4ad3ff6ba2c7d0eeca964fa52bc1573..54d8386bf9c0ff84e63c3827d9ef88ad61edc201 100644 (file)
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -150,6 +150,30 @@
        status = "okay";
 };
 
+&spifmc0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&spifmc1 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
 &uart0 {
        pinctrl-0 = <&uart0_cfg>;
        pinctrl-names = "default";