+++ /dev/null
-A tunnel connecting roadwarrior <b>carol</b> with <b>moon</b> and the network behind it is established. <b>carol</b> requests and gets a virtual IP from <b>moon</b>. The connection is tested by client <b>carol</b> pinging client <b>alice</b> located behind gateway <b>moon</b> as well as the inner interface of the gateway.
-<p/>
-Appropriate routes are automatically configured on the IPsec hosts.
+++ /dev/null
-moon::ipsec statusall::rw-carol.*ESTABLISHED::YES
-carol::ipsec statusall::home.*ESTABLISHED::YES
-carol::ip route::10.1.0.0/16.*eth0.*PH_IP_CAROL1::YES
-moon::ip route::PH_IP_CAROL1.*eth0.*::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ping -c 1 PH_IP_MOON1::64 bytes from PH_IP_MOON1: icmp_seq=1::YES
-moon::tcpdumpcount::IP carol.strongswan.org > moon.strongswan.org: ESP::2
-moon::tcpdumpcount::IP moon.strongswan.org > carol.strongswan.org: ESP::2
-moon::tcpdump::IP carol1.strongswan.org > alice.strongswan.org: ICMP::YES
-moon::tcpdump::IP carol1.strongswan.org > moon1.strongswan.org: ICMP::YES
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- strictcrlpolicy=no
- plutostart=no
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev2
-
-conn home
- left=PH_IP_CAROL
- leftcert=carolCert.pem
- leftid=carol@strongswan.org
- leftsourceip=%config
- right=PH_IP_MOON
- rightid=@moon.strongswan.org
- rightsubnet=10.1.0.0/16
- auto=add
-
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- strictcrlpolicy=no
- plutostart=no
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev2
-
-conn rw-carol
- left=PH_IP_MOON
- leftid=@moon.strongswan.org
- leftcert=moonCert.pem
- leftsubnet=10.1.0.0/16
- right=%any
- rightid=carol@strongswan.org
- rightsourceip=PH_IP_CAROL1
- auto=add
-
+++ /dev/null
-moon::ipsec stop
-carol::ipsec stop
+++ /dev/null
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-moon::ipsec start
-carol::ipsec start
-carol::sleep 2
-carol::ipsec up home
-carol::sleep 2
+++ /dev/null
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"