can: bittiming: add PWM parameters

In CAN XL, higher data bit rates require the CAN transceiver to switch
its operation mode to use Pulse-Width Modulation (PWM) transmission
mode instead of the classic dominant/recessive transmission mode.

The PWM parameters are:

  - PWMS: pulse width modulation short phase
  - PWML: pulse width modulation long phase
  - PWMO: pulse width modulation offset

CiA 612-2 specifies PWMS and PWML to be at least 1 (arguably, PWML
shall be at least 2 to respect the PWMS < PWML rule). PWMO's minimum
is expected to always be zero. It is added more for consistency than
anything else.

Add struct can_pwm_const so that the different devices can provide
their minimum and maximum values.

When TMS is on, the runtime PWMS, PWML and PWMO are needed (either
calculated or provided by the user): add struct can_pwm to store
these.

TDC and PWM can not be used at the same time (TDC can only be used
when TMS is off and PWM only when TMS is on). struct can_pwm is thus
put together with struct can_tdc inside a union to save some space.

The netlink logic will be added in an upcoming change.

Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251126-canxl-v8-8-e7e3eb74f889@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index b6cd2476ffd7bd48897f2f410b323cc7b4c1efbc..967d76689c4f23023baabfa3bb39141b881e0d57 100644 (file)
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /* Copyright (c) 2020 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
- * Copyright (c) 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ * Copyright (c) 2021-2025 Vincent Mailhol <mailhol@kernel.org>
  */
 
 #ifndef _CAN_BITTIMING_H
@@ -120,11 +120,48 @@ struct can_tdc_const {
        u32 tdcf_max;
 };
 
+/*
+ * struct can_pwm - CAN Pulse-Width Modulation (PWM) parameters
+ *
+ * @pwms: pulse width modulation short phase
+ * @pwml: pulse width modulation long phase
+ * @pwmo: pulse width modulation offset
+ */
+struct can_pwm {
+       u32 pwms;
+       u32 pwml;
+       u32 pwmo;
+};
+
+/*
+ * struct can_pwm - CAN hardware-dependent constants for Pulse-Width
+ *     Modulation (PWM)
+ *
+ * @pwms_min: PWM short phase minimum value. Must be at least 1.
+ * @pwms_max: PWM short phase maximum value
+ * @pwml_min: PWM long phase minimum value. Must be at least 1.
+ * @pwml_max: PWM long phase maximum value
+ * @pwmo_min: PWM offset phase minimum value
+ * @pwmo_max: PWM offset phase maximum value
+ */
+struct can_pwm_const {
+       u32 pwms_min;
+       u32 pwms_max;
+       u32 pwml_min;
+       u32 pwml_max;
+       u32 pwmo_min;
+       u32 pwmo_max;
+};
+
 struct data_bittiming_params {
        const struct can_bittiming_const *data_bittiming_const;
        struct can_bittiming data_bittiming;
        const struct can_tdc_const *tdc_const;
-       struct can_tdc tdc;
+       const struct can_pwm_const *pwm_const;
+       union {
+               struct can_tdc tdc;
+               struct can_pwm pwm;
+       };
        const u32 *data_bitrate_const;
        unsigned int data_bitrate_const_cnt;
        int (*do_set_data_bittiming)(struct net_device *dev);