--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
--- /dev/null
+
+AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
+
+lib_LTLIBRARIES = libsqlite3.la
+libsqlite3_la_SOURCES = sqlite3.c
+libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
+
+bin_PROGRAMS = sqlite3
+sqlite3_SOURCES = shell.c sqlite3.h
+sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
+sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
+
+include_HEADERS = sqlite3.h sqlite3ext.h
+
+EXTRA_DIST = sqlite3.1 tea
+pkgconfigdir = ${libdir}/pkgconfig
+pkgconfig_DATA = sqlite3.pc
+
+man_MANS = sqlite3.1
--- /dev/null
+
+This package contains:
+
+ * the SQLite library amalgamation (single file) source code distribution,
+ * the shell.c file used to build the sqlite3 shell too, and
+ * the sqlite3.h and sqlite3ext.h header files required to link programs
+ and sqlite extensions against the installed libary.
+ * autoconf/automake installation infrastucture.
+
+The generic installation instructions for autoconf/automake are found
+in the INSTALL file.
+
+The following SQLite specific boolean options are supported:
+
+ --enable-readline use readline in shell tool [default=yes]
+ --enable-threadsafe build a thread-safe library [default=yes]
+ --enable-dynamic-extensions support loadable extensions [default=yes]
+
+The default value for the CFLAGS variable (options passed to the C
+compiler) includes debugging symbols in the build, resulting in larger
+binaries than are necessary. Override it on the configure command
+line like this:
+
+ $ CFLAGS="-Os" ./configure
+
+to produce a smaller installation footprint.
+
+Other SQLite compilation parameters can also be set using CFLAGS. For
+example:
+
+ $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure
+
--- /dev/null
+
+This file describes how to use the files in this directory to create a new
+version of the "autoconf-amalgamation" package.
+
+1. The following files should have executable permission:
+
+ chmod 755 install-sh
+ chmod 755 missing
+ chmod 755 depcomp
+ chmod 755 config.sub
+ chmod 755 config.guess
+
+2. Copy new versions of the following SQLite files into this directory:
+
+ sqlite3.c
+ sqlite3.h
+ sqlite3ext.h
+ sqlite3.1
+ sqlite3.pc.in
+ shell.c
+
+3. Update the SQLite version number in the AC_INIT macro in file
+ configure.ac:
+
+ AC_INIT(sqlite, 3.6.3, http://www.sqlite.org)
+
+4. Run the following commands to push the version number change through
+ to the generated files.
+
+ aclocal
+ autoconf
+ automake
+
+5. Create the tclsqlite3.c file in the tea/generic directory. As follows:
+
+ mkdir -p tea/generic
+ echo "#ifdef USE_SYSTEM_SQLITE" > tea/generic/tclsqlite3.c
+ echo "# include <sqlite3.h>" >> tea/generic/tclsqlite3.c
+ echo "#else" >> tea/generic/tclsqlite3.c
+ echo "#include \"../../sqlite3.c\"" >> tea/generic/tclsqlite3.c
+ echo "#endif" >> tea/generic/tclsqlite3.c
+ cat ../src/tclsqlite.c >> tea/generic/tclsqlite3.c
+
+6. Update the SQLite version in the AC_INIT macro in file tea/configure.in:
+
+ AC_INIT([sqlite], [3.6.3])
+
+7. From the 'tea' directory, run the following commands:
+
+ autoconf
+ rm -rf autom4te.cache
+
+8. Run "./configure && make dist". This builds a distribution package
+ named something like "sqlite-3.6.3.tar.gz". Rename to
+ "sqlite-amalgamation-3.6.3.tar.gz" and use.
+
+
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-02-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ hexagon:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-02-10'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | aarch64 | aarch64_be \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | be32 | be64 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | epiphany \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | open8 \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | aarch64-* | aarch64_be-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i386-pc
+ os=-msys
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+
+#-----------------------------------------------------------------------
+# Supports the following non-standard switches.
+#
+# --enable-threadsafe
+# --enable-readline
+# --enable-dynamic-extensions
+#
+
+AC_PREREQ(2.61)
+AC_INIT(sqlite, 3.7.5, http://www.sqlite.org)
+AC_CONFIG_SRCDIR([sqlite3.c])
+
+# Use automake.
+AM_INIT_AUTOMAKE([foreign])
+
+AC_SYS_LARGEFILE
+
+# Check for required programs.
+AC_PROG_CC
+AC_PROG_RANLIB
+AC_PROG_LIBTOOL
+AC_PROG_MKDIR_P
+
+# Check for library functions that SQLite can optionally use.
+AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
+AC_FUNC_STRERROR_R
+
+AC_CONFIG_FILES([Makefile sqlite3.pc])
+AC_SUBST(BUILD_CFLAGS)
+
+#-----------------------------------------------------------------------
+# --enable-readline
+#
+AC_ARG_ENABLE(readline, [AS_HELP_STRING(
+ [--enable-readline],
+ [use readline in shell tool (yes, no) [default=yes]])],
+ [], [enable_readline=yes])
+if test x"$enable_readline" != xno ; then
+ sLIBS=$LIBS
+ LIBS=""
+ AC_SEARCH_LIBS(tgetent, curses ncurses ncursesw, [], [])
+ AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no])
+ AC_CHECK_FUNCS(readline, [], [])
+ READLINE_LIBS=$LIBS
+ LIBS=$sLIBS
+fi
+AC_SUBST(READLINE_LIBS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# --enable-threadsafe
+#
+AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
+ [--enable-threadsafe], [build a thread-safe library [default=yes]])],
+ [], [enable_threadsafe=yes])
+THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
+if test x"$enable_threadsafe" != "xno"; then
+ THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
+ AC_SEARCH_LIBS(pthread_create, pthread)
+fi
+AC_SUBST(THREADSAFE_FLAGS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# --enable-dynamic-extensions
+#
+AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
+ [--enable-dynamic-extensions], [support loadable extensions [default=yes]])],
+ [], [enable_dynamic_extensions=yes])
+if test x"$enable_dynamic_extensions" != "xno"; then
+ AC_SEARCH_LIBS(dlopen, dl)
+else
+ DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
+fi
+AC_MSG_CHECKING([for whether to support dynamic extensions])
+AC_MSG_RESULT($enable_dynamic_extensions)
+AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
+#-----------------------------------------------------------------------
+
+AC_CHECK_FUNCS(posix_fallocate)
+
+#-----------------------------------------------------------------------
+# UPDATE: Maybe it's better if users just set CFLAGS before invoking
+# configure. This option doesn't really add much...
+#
+# --enable-tempstore
+#
+# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
+# [--enable-tempstore],
+# [in-memory temporary tables (never, no, yes, always) [default=no]])],
+# [], [enable_tempstore=no])
+# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
+# case "$enable_tempstore" in
+# never ) TEMP_STORE=0 ;;
+# no ) TEMP_STORE=1 ;;
+# always ) TEMP_STORE=3 ;;
+# yes ) TEMP_STORE=3 ;;
+# * )
+# TEMP_STORE=1
+# enable_tempstore=yes
+# ;;
+# esac
+# AC_MSG_RESULT($enable_tempstore)
+# AC_SUBST(TEMP_STORE)
+#-----------------------------------------------------------------------
+
+AC_OUTPUT
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2012-03-27.16; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+ # However on
+ # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\':
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ # tcc 0.9.26 (FIXME still under development at the moment of writing)
+ # will emit a similar output, but also prepend the continuation lines
+ # with horizontal tabulation characters.
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form 'foo.o: dependent.h',
+ # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
+ < "$tmpdepfile" > "$depfile"
+ sed '
+ s/[ '"$tab"'][ '"$tab"']*/ /g
+ s/^ *//
+ s/ *\\*$//
+ s/^[^:]*: *//
+ /^$/d
+ /:$/d
+ s/$/ :/
+ ' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test "$stat" = 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for `test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-warning|--no-warn)
+ opt_warning=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ #func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$absdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ #test "$absdir" != "$libdir" && \
+ # func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ # Remove ${wl} instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ func_resolve_sysroot "$deplib"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2012-01-06.13; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+# Makefile.in --
+#
+# This file is a Makefile for Sample TEA Extension. If it has the name
+# "Makefile.in" then it is a template for a Makefile; to generate the
+# actual Makefile, run "./configure", which is a configuration script
+# generated by the "autoconf" program (constructs like "@foo@" will get
+# replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES = @PKG_SOURCES@
+PKG_OBJECTS = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES = $(PKG_LIB_FILE)
+BINARIES = $(lib_BINARIES)
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+libdir = @libdir@
+datadir = @datadir@
+mandir = @mandir@
+includedir = @includedir@
+
+DESTDIR =
+
+PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir = $(datadir)/$(PKG_DIR)
+pkglibdir = $(libdir)/$(PKG_DIR)
+pkgincludedir = $(includedir)/$(PKG_DIR)
+
+top_builddir = .
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+CC = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+CLEANFILES = @CLEANFILES@
+EXEEXT = @EXEEXT@
+LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
+MAKE_LIB = @MAKE_LIB@
+MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB = @MAKE_STUB_LIB@
+OBJEXT = @OBJEXT@
+RANLIB = @RANLIB@
+RANLIB_STUB = @RANLIB_STUB@
+SHLIB_CFLAGS = @SHLIB_CFLAGS@
+SHLIB_LD = @SHLIB_LD@
+SHLIB_LD_LIBS = @SHLIB_LD_LIBS@
+STLIB_LD = @STLIB_LD@
+#TCL_DEFS = @TCL_DEFS@
+TCL_BIN_DIR = @TCL_BIN_DIR@
+TCL_SRC_DIR = @TCL_SRC_DIR@
+#TK_BIN_DIR = @TK_BIN_DIR@
+#TK_SRC_DIR = @TK_SRC_DIR@
+
+# This is no longer necessary even for packages that use private Tcl headers
+#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing. The other environment variables allow us
+# to test against an uninstalled Tcl. Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH = $(top_builddir)
+TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
+ @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+ PATH="$(EXTRA_PATH):$(PATH)" \
+ TCLLIBPATH="$(TCLLIBPATH)"
+# TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+
+TCLSH_PROG = @TCLSH_PROG@
+TCLSH = $(TCLSH_ENV) $(TCLSH_PROG)
+
+#WISH_PROG = @WISH_PROG@
+#WISH = $(TCLSH_ENV) $(WISH_PROG)
+
+
+SHARED_BUILD = @SHARED_BUILD@
+
+INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(srcdir)/..
+#INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.in checks for the necessary components
+# that your library may use. TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS = @DEFS@ $(PKG_CFLAGS)
+
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
+
+CPPFLAGS = @CPPFLAGS@
+LIBS = @PKG_LIBS@ @LIBS@
+AR = @AR@
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS. Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target inclues executable programs and
+# platform-dependent libraries. Modify these targets so that they install
+# the various pieces of your package. The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+ @echo "If you have documentation to create, place the commands to"
+ @echo "build the docs in the 'doc:' target. For example:"
+ @echo " xml2nroff sample.xml > sample.n"
+ @echo " xml2html sample.xml > sample.html"
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+ @mkdir -p $(DESTDIR)$(includedir)
+ @echo "Installing header files in $(DESTDIR)$(includedir)"
+ @list='$(PKG_HEADERS)'; for i in $$list; do \
+ echo "Installing $(srcdir)/$$i" ; \
+ $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+ done;
+
+#========================================================================
+# Install documentation. Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+ @mkdir -p $(DESTDIR)$(mandir)/mann
+ @echo "Installing documentation in $(DESTDIR)$(mandir)"
+ @list='$(srcdir)/doc/*.n'; for i in $$list; do \
+ echo "Installing $$i"; \
+ rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
+ $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+ done
+
+test: binaries libraries
+ @echo "SQLite TEA distribution does not include tests"
+
+shell: binaries libraries
+ @$(TCLSH) $(SCRIPT)
+
+gdb:
+ $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above. That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library. In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+ -rm -f $(PKG_LIB_FILE)
+ ${MAKE_LIB}
+ $(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+ -rm -f $(PKG_STUB_LIB_FILE)
+ ${MAKE_STUB_LIB}
+ $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension. If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
+
+.c.@OBJEXT@:
+ $(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT = /tmp/dist
+DIST_DIR = $(DIST_ROOT)/$(PKG_DIR)
+
+dist-clean:
+ rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean
+ mkdir -p $(DIST_DIR)
+ cp -p $(srcdir)/README* $(srcdir)/license* \
+ $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
+ $(DIST_DIR)/
+ chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
+ chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
+
+ for i in $(srcdir)/*.[ch]; do \
+ if [ -f $$i ]; then \
+ cp -p $$i $(DIST_DIR)/ ; \
+ fi; \
+ done;
+
+ mkdir $(DIST_DIR)/tclconfig
+ cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
+ $(DIST_DIR)/tclconfig/
+ chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
+ chmod +x $(DIST_DIR)/tclconfig/install-sh
+
+ list='demos doc generic library mac tests unix win'; \
+ for p in $$list; do \
+ if test -d $(srcdir)/$$p ; then \
+ mkdir $(DIST_DIR)/$$p; \
+ cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
+ fi; \
+ done
+
+ (cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here. Instead, set the "CLEANFILES"
+# variable in configure.in
+#========================================================================
+
+clean:
+ -test -z "$(BINARIES)" || rm -f $(BINARIES)
+ -rm -f *.$(OBJEXT) core *.core
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+ -rm -f *.tab.c
+ -rm -f $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries. On Windows this includes both .dll and
+# .lib files. Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+ @mkdir -p $(DESTDIR)$(pkglibdir)
+ @list='$(lib_BINARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+ stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
+ if test "x$$stub" = "xstub"; then \
+ echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
+ $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
+ else \
+ echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
+ $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
+ fi; \
+ ext=`echo $$p|sed -e "s/.*\.//"`; \
+ if test "x$$ext" = "xdll"; then \
+ lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+ if test -f $$lib; then \
+ echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
+ $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+ fi; \
+ fi; \
+ fi; \
+ done
+ @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+ if test -f $(srcdir)/$$p; then \
+ destp=`basename $$p`; \
+ echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+ fi; \
+ done
+ @if test "x$(SHARED_BUILD)" = "x1"; then \
+ echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+ $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+ fi
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+ @mkdir -p $(DESTDIR)$(bindir)
+ @list='$(bin_BINARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+ fi; \
+ done
+
+.SUFFIXES: .c .$(OBJEXT)
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+ list='$(lib_BINARIES)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+ done
+ list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+ p=`basename $$p`; \
+ rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+ done
+ list='$(bin_BINARIES)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(bindir)/$$p; \
+ done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+This is the SQLite extension for Tcl using the Tcl Extension
+Architecture (TEA). For additional information on SQLite see
+
+ http://www.sqlite.org/
+
+
+UNIX BUILD
+==========
+
+Building under most UNIX systems is easy, just run the configure script
+and then run make. For more information about the build process, see
+the tcl/unix/README file in the Tcl src dist. The following minimal
+example will install the extension in the /opt/tcl directory.
+
+ $ cd sqlite-*-tea
+ $ ./configure --prefix=/opt/tcl
+ $ make
+ $ make install
+
+WINDOWS BUILD
+=============
+
+The recommended method to build extensions under windows is to use the
+Msys + Mingw build process. This provides a Unix-style build while
+generating native Windows binaries. Using the Msys + Mingw build tools
+means that you can use the same configure script as per the Unix build
+to create a Makefile. See the tcl/win/README file for the URL of
+the Msys + Mingw download.
+
+If you have VC++ then you may wish to use the files in the win
+subdirectory and build the extension using just VC++. These files have
+been designed to be as generic as possible but will require some
+additional maintenance by the project developer to synchronise with
+the TEA configure.in and Makefile.in files. Instructions for using the
+VC++ makefile are written in the first part of the Makefile.vc
+file.
--- /dev/null
+#
+# Include the TEA standard macro set
+#
+
+builtin(include,tclconfig/tcl.m4)
+
+#
+# Add here whatever m4 macros you want to define for your package
+#
--- /dev/null
+#!/bin/bash -norc
+dnl This file is an input file used by the GNU "autoconf" program to
+dnl generate the file "configure", which is run during Tcl installation
+dnl to configure the system for the local environment.
+#
+# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $
+
+#-----------------------------------------------------------------------
+# Sample configure.in for Tcl Extensions. The only places you should
+# need to modify this file are marked by the string __CHANGE__
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Set your package name and version numbers here.
+#
+# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
+# set as provided. These will also be added as -D defs in your Makefile
+# so you can encode the package version directly into the source files.
+#-----------------------------------------------------------------------
+
+AC_INIT([sqlite], [3.7.4])
+
+#--------------------------------------------------------------------
+# Call TEA_INIT as the first TEA_ macro to set up initial vars.
+# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
+# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
+#--------------------------------------------------------------------
+
+TEA_INIT([3.9])
+
+AC_CONFIG_AUX_DIR(tclconfig)
+
+#--------------------------------------------------------------------
+# Load the tclConfig.sh file
+#--------------------------------------------------------------------
+
+TEA_PATH_TCLCONFIG
+TEA_LOAD_TCLCONFIG
+
+#--------------------------------------------------------------------
+# Load the tkConfig.sh file if necessary (Tk extension)
+#--------------------------------------------------------------------
+
+#TEA_PATH_TKCONFIG
+#TEA_LOAD_TKCONFIG
+
+#-----------------------------------------------------------------------
+# Handle the --prefix=... option by defaulting to what Tcl gave.
+# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
+#-----------------------------------------------------------------------
+
+TEA_PREFIX
+
+#-----------------------------------------------------------------------
+# Standard compiler checks.
+# This sets up CC by using the CC env var, or looks for gcc otherwise.
+# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create
+# the basic setup necessary to compile executables.
+#-----------------------------------------------------------------------
+
+TEA_SETUP_COMPILER
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Specify the C source files to compile in TEA_ADD_SOURCES,
+# public headers that need to be installed in TEA_ADD_HEADERS,
+# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
+# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
+# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
+# and PKG_TCL_SOURCES.
+#-----------------------------------------------------------------------
+
+TEA_ADD_SOURCES([tclsqlite3.c])
+TEA_ADD_HEADERS([])
+TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"])
+TEA_ADD_LIBS([])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1])
+TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_RTREE=1])
+TEA_ADD_CFLAGS([-DSQLITE_OMIT_DEPRECATED=1])
+TEA_ADD_STUB_SOURCES([])
+TEA_ADD_TCL_SOURCES([])
+
+#--------------------------------------------------------------------
+# The --with-system-sqlite causes the TCL bindings to SQLite to use
+# the system shared library for SQLite rather than statically linking
+# against its own private copy. This is dangerous and leads to
+# undersirable dependences and is not recommended.
+# Patchs from rmax.
+#--------------------------------------------------------------------
+AC_ARG_WITH([system-sqlite],
+ [AC_HELP_STRING([--with-system-sqlite],
+ [use a system-supplied libsqlite3 instead of the bundled one])],
+ [], [with_system_sqlite=no])
+if test x$with_system_sqlite != xno; then
+ AC_CHECK_HEADER([sqlite3.h],
+ [AC_CHECK_LIB([sqlite3],[sqlite3_initialize],
+ [AC_DEFINE(USE_SYSTEM_SQLITE)
+ LIBS="$LIBS -lsqlite3"])])
+fi
+
+#--------------------------------------------------------------------
+# __CHANGE__
+# Choose which headers you need. Extension authors should try very
+# hard to only rely on the Tcl public header files. Internal headers
+# contain private data structures and are subject to change without
+# notice.
+# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
+#--------------------------------------------------------------------
+
+TEA_PUBLIC_TCL_HEADERS
+#TEA_PRIVATE_TCL_HEADERS
+
+#TEA_PUBLIC_TK_HEADERS
+#TEA_PRIVATE_TK_HEADERS
+#TEA_PATH_X
+
+#--------------------------------------------------------------------
+# Check whether --enable-threads or --disable-threads was given.
+# This auto-enables if Tcl was compiled threaded.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_THREADS
+if test "${TCL_THREADS}" = "1" ; then
+ AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build])
+ # Not automatically added by Tcl because its assumed Tcl links to them,
+ # but it may not if it isn't really a threaded build.
+ TEA_ADD_LIBS([$THREADS_LIBS])
+else
+ AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build])
+fi
+
+#--------------------------------------------------------------------
+# The statement below defines a collection of symbols related to
+# building as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SHARED
+
+#--------------------------------------------------------------------
+# This macro figures out what flags to use with the compiler/linker
+# when building shared/static debug/optimized objects. This information
+# can be taken from the tclConfig.sh file, but this figures it all out.
+#--------------------------------------------------------------------
+
+TEA_CONFIG_CFLAGS
+
+#--------------------------------------------------------------------
+# Set the default compiler switches based on the --enable-symbols option.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SYMBOLS
+
+#--------------------------------------------------------------------
+# Everyone should be linking against the Tcl stub library. If you
+# can't for some reason, remove this definition. If you aren't using
+# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
+# link against the non-stubbed Tcl library. Add Tk too if necessary.
+#--------------------------------------------------------------------
+
+AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
+#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])
+
+
+#--------------------------------------------------------------------
+# Redefine fdatasync as fsync on systems that lack fdatasync
+#--------------------------------------------------------------------
+
+AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync))
+
+AC_FUNC_STRERROR_R
+
+
+#--------------------------------------------------------------------
+# This macro generates a line to use when building a library. It
+# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
+# and TEA_LOAD_TCLCONFIG macros above.
+#--------------------------------------------------------------------
+
+TEA_MAKE_LIB
+
+#--------------------------------------------------------------------
+# Determine the name of the tclsh and/or wish executables in the
+# Tcl and Tk build directories or the location they were installed
+# into. These paths are used to support running test cases only,
+# the Makefile should not be making use of these paths to generate
+# a pkgIndex.tcl file or anything else at extension build time.
+#--------------------------------------------------------------------
+
+TEA_PROG_TCLSH
+#TEA_PROG_WISH
+
+#--------------------------------------------------------------------
+# Finally, substitute all of the various values into the Makefile.
+# You may alternatively have a special pkgIndex.tcl.in or other files
+# which require substituting th AC variables in. Include these here.
+#--------------------------------------------------------------------
+
+AC_OUTPUT([Makefile pkgIndex.tcl])
--- /dev/null
+.TH sqlite3 n 4.1 "Tcl-Extensions"
+.HS sqlite3 tcl
+.BS
+.SH NAME
+sqlite3 \- an interface to the SQLite3 database engine
+.SH SYNOPSIS
+\fBsqlite3\fI command_name ?filename?\fR
+.br
+.SH DESCRIPTION
+SQLite3 is a self-contains, zero-configuration, transactional SQL database
+engine. This extension provides an easy to use interface for accessing
+SQLite database files from Tcl.
+.PP
+For full documentation see http://www.sqlite.org/ and
+in particular http://www.sqlite.org/tclsqlite.html.
--- /dev/null
+The author disclaims copyright to this source code. In place of
+a legal notice, here is a blessing:
+
+ May you do good and not evil.
+ May you find forgiveness for yourself and forgive others.
+ May you share freely, never taking more than you give.
--- /dev/null
+#
+# Tcl package index file
+#
+# Note sqlite*3* init specifically
+#
+package ifneeded sqlite3 @PACKAGE_VERSION@ \
+ [list load [file join $dir @PKG_LIB_FILE@] Sqlite3]
--- /dev/null
+#!/bin/sh
+
+#
+# install - install a program, script, or datafile
+# This comes from X11R5; it is not part of GNU.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+
+instcmd="$mvprog"
+chmodcmd=""
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+fi
+
+if [ x"$dst" = x ]
+then
+ echo "install: no destination specified"
+ exit 1
+fi
+
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+if [ -d $dst ]
+then
+ dst="$dst"/`basename $src`
+fi
+
+# Make a temp file name in the proper directory.
+
+dstdir=`dirname $dst`
+dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+$doit $instcmd $src $dsttmp
+
+# and set any options; do chmod last to preserve setuid bits
+
+if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
+if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
+if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
+if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
+
+# Now rename the file to the real destination.
+
+$doit $rmcmd $dst
+$doit $mvcmd $dsttmp $dst
+
+
+exit 0
--- /dev/null
+# tcl.m4 --
+#
+# This file provides a set of autoconf macros to help TEA-enable
+# a Tcl extension.
+#
+# Copyright (c) 1999-2000 Ajuba Solutions.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# RCS: @(#) $Id: tcl.m4,v 1.145 2010/08/17 00:33:40 hobbs Exp $
+
+AC_PREREQ(2.57)
+
+dnl TEA extensions pass us the version of TEA they think they
+dnl are compatible with (must be set in TEA_INIT below)
+dnl TEA_VERSION="3.9"
+
+# Possible values for key variables defined:
+#
+# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
+# TEA_PLATFORM - windows unix
+#
+
+#------------------------------------------------------------------------
+# TEA_PATH_TCLCONFIG --
+#
+# Locate the tclConfig.sh file and perform a sanity check on
+# the Tcl compile flags
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --with-tcl=...
+#
+# Defines the following vars:
+# TCL_BIN_DIR Full path to the directory containing
+# the tclConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_TCLCONFIG], [
+ dnl TEA specific: Make sure we are initialized
+ AC_REQUIRE([TEA_INIT])
+ #
+ # Ok, lets find the tcl configuration
+ # First, look for one uninstalled.
+ # the alternative search directory is invoked by --with-tcl
+ #
+
+ if test x"${no_tcl}" = x ; then
+ # we reset no_tcl in case something fails here
+ no_tcl=true
+ AC_ARG_WITH(tcl,
+ AC_HELP_STRING([--with-tcl],
+ [directory containing tcl configuration (tclConfig.sh)]),
+ with_tclconfig="${withval}")
+ AC_MSG_CHECKING([for Tcl configuration])
+ AC_CACHE_VAL(ac_cv_c_tclconfig,[
+
+ # First check to see if --with-tcl was specified.
+ if test x"${with_tclconfig}" != x ; then
+ case "${with_tclconfig}" in
+ */tclConfig.sh )
+ if test -f "${with_tclconfig}"; then
+ AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
+ with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
+ fi ;;
+ esac
+ if test -f "${with_tclconfig}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
+ else
+ AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
+ fi
+ fi
+
+ # then check for a private Tcl installation
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ../tcl \
+ `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
+ ../../tcl \
+ `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
+ ../../../tcl \
+ `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a -f "$i/win/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
+ break
+ fi
+ if test -f "$i/unix/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # on Darwin, check in Framework installation locations
+ if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
+ `ls -d /Library/Frameworks 2>/dev/null` \
+ `ls -d /Network/Library/Frameworks 2>/dev/null` \
+ `ls -d /System/Library/Frameworks 2>/dev/null` \
+ ; do
+ if test -f "$i/Tcl.framework/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # TEA specific: on Windows, check in common installation locations
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d C:/Tcl/lib 2>/dev/null` \
+ `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
+ ; do
+ if test -f "$i/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # check in a few common install locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d ${libdir} 2>/dev/null` \
+ `ls -d ${exec_prefix}/lib 2>/dev/null` \
+ `ls -d ${prefix}/lib 2>/dev/null` \
+ `ls -d /usr/local/lib 2>/dev/null` \
+ `ls -d /usr/contrib/lib 2>/dev/null` \
+ `ls -d /usr/lib 2>/dev/null` \
+ `ls -d /usr/lib64 2>/dev/null` \
+ ; do
+ if test -f "$i/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # check in a few other private locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tcl \
+ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a -f "$i/win/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
+ break
+ fi
+ if test -f "$i/unix/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
+ break
+ fi
+ done
+ fi
+ ])
+
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ TCL_BIN_DIR="# no Tcl configs found"
+ AC_MSG_ERROR([Can't find Tcl configuration definitions])
+ else
+ no_tcl=
+ TCL_BIN_DIR="${ac_cv_c_tclconfig}"
+ AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
+ fi
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PATH_TKCONFIG --
+#
+# Locate the tkConfig.sh file
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --with-tk=...
+#
+# Defines the following vars:
+# TK_BIN_DIR Full path to the directory containing
+# the tkConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_TKCONFIG], [
+ #
+ # Ok, lets find the tk configuration
+ # First, look for one uninstalled.
+ # the alternative search directory is invoked by --with-tk
+ #
+
+ if test x"${no_tk}" = x ; then
+ # we reset no_tk in case something fails here
+ no_tk=true
+ AC_ARG_WITH(tk,
+ AC_HELP_STRING([--with-tk],
+ [directory containing tk configuration (tkConfig.sh)]),
+ with_tkconfig="${withval}")
+ AC_MSG_CHECKING([for Tk configuration])
+ AC_CACHE_VAL(ac_cv_c_tkconfig,[
+
+ # First check to see if --with-tkconfig was specified.
+ if test x"${with_tkconfig}" != x ; then
+ case "${with_tkconfig}" in
+ */tkConfig.sh )
+ if test -f "${with_tkconfig}"; then
+ AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself])
+ with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`"
+ fi ;;
+ esac
+ if test -f "${with_tkconfig}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`"
+ else
+ AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
+ fi
+ fi
+
+ # then check for a private Tk library
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in \
+ ../tk \
+ `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
+ ../../tk \
+ `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
+ ../../../tk \
+ `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a -f "$i/win/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
+ break
+ fi
+ if test -f "$i/unix/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # on Darwin, check in Framework installation locations
+ if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then
+ for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
+ `ls -d /Library/Frameworks 2>/dev/null` \
+ `ls -d /Network/Library/Frameworks 2>/dev/null` \
+ `ls -d /System/Library/Frameworks 2>/dev/null` \
+ ; do
+ if test -f "$i/Tk.framework/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # check in a few common install locations
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in `ls -d ${libdir} 2>/dev/null` \
+ `ls -d ${exec_prefix}/lib 2>/dev/null` \
+ `ls -d ${prefix}/lib 2>/dev/null` \
+ `ls -d /usr/local/lib 2>/dev/null` \
+ `ls -d /usr/contrib/lib 2>/dev/null` \
+ `ls -d /usr/lib 2>/dev/null` \
+ `ls -d /usr/lib64 2>/dev/null` \
+ ; do
+ if test -f "$i/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # TEA specific: on Windows, check in common installation locations
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a x"${ac_cv_c_tkconfig}" = x ; then
+ for i in `ls -d C:/Tcl/lib 2>/dev/null` \
+ `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
+ ; do
+ if test -f "$i/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # check in a few other private locations
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tk \
+ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a -f "$i/win/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
+ break
+ fi
+ if test -f "$i/unix/tkConfig.sh" ; then
+ ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
+ break
+ fi
+ done
+ fi
+ ])
+
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ TK_BIN_DIR="# no Tk configs found"
+ AC_MSG_ERROR([Can't find Tk configuration definitions])
+ else
+ no_tk=
+ TK_BIN_DIR="${ac_cv_c_tkconfig}"
+ AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh])
+ fi
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_TCLCONFIG --
+#
+# Load the tclConfig.sh file
+#
+# Arguments:
+#
+# Requires the following vars to be set:
+# TCL_BIN_DIR
+#
+# Results:
+#
+# Subst the following vars:
+# TCL_BIN_DIR
+# TCL_SRC_DIR
+# TCL_LIB_FILE
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LOAD_TCLCONFIG], [
+ AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh])
+
+ if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
+ AC_MSG_RESULT([loading])
+ . "${TCL_BIN_DIR}/tclConfig.sh"
+ else
+ AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh])
+ fi
+
+ # eval is required to do the TCL_DBGX substitution
+ eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
+ eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""
+
+ # If the TCL_BIN_DIR is the build directory (not the install directory),
+ # then set the common variable name to the value of the build variables.
+ # For example, the variable TCL_LIB_SPEC will be set to the value
+ # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
+ # instead of TCL_BUILD_LIB_SPEC since it will work with both an
+ # installed and uninstalled version of Tcl.
+ if test -f "${TCL_BIN_DIR}/Makefile" ; then
+ TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}"
+ TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}"
+ TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}"
+ elif test "`uname -s`" = "Darwin"; then
+ # If Tcl was built as a framework, attempt to use the libraries
+ # from the framework at the given location so that linking works
+ # against Tcl.framework installed in an arbitrary location.
+ case ${TCL_DEFS} in
+ *TCL_FRAMEWORK*)
+ if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
+ for i in "`cd "${TCL_BIN_DIR}"; pwd`" \
+ "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do
+ if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
+ TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}"
+ break
+ fi
+ done
+ fi
+ if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
+ TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}"
+ TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
+ fi
+ ;;
+ esac
+ fi
+
+ # eval is required to do the TCL_DBGX substitution
+ eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
+ eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
+ eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
+ eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""
+
+ AC_SUBST(TCL_VERSION)
+ AC_SUBST(TCL_PATCH_LEVEL)
+ AC_SUBST(TCL_BIN_DIR)
+ AC_SUBST(TCL_SRC_DIR)
+
+ AC_SUBST(TCL_LIB_FILE)
+ AC_SUBST(TCL_LIB_FLAG)
+ AC_SUBST(TCL_LIB_SPEC)
+
+ AC_SUBST(TCL_STUB_LIB_FILE)
+ AC_SUBST(TCL_STUB_LIB_FLAG)
+ AC_SUBST(TCL_STUB_LIB_SPEC)
+
+ case "`uname -s`" in
+ *CYGWIN_*)
+ AC_MSG_CHECKING([for cygwin variant])
+ case ${TCL_EXTRA_CFLAGS} in
+ *-mwin32*|*-mno-cygwin*)
+ TEA_PLATFORM="windows"
+ CFLAGS="$CFLAGS -mwin32"
+ AC_MSG_RESULT([win32])
+ ;;
+ *)
+ TEA_PLATFORM="unix"
+ AC_MSG_RESULT([unix])
+ ;;
+ esac
+ EXEEXT=".exe"
+ ;;
+ *)
+ ;;
+ esac
+
+ # Do this here as we have fully defined TEA_PLATFORM now
+ if test "${TEA_PLATFORM}" = "windows" ; then
+ # The BUILD_$pkg is to define the correct extern storage class
+ # handling when making this package
+ AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME})
+ CLEANFILES="$CLEANFILES *.lib *.dll *.pdb"
+ fi
+
+ # TEA specific:
+ AC_SUBST(CLEANFILES)
+ AC_SUBST(TCL_LIBS)
+ AC_SUBST(TCL_DEFS)
+ AC_SUBST(TCL_EXTRA_CFLAGS)
+ AC_SUBST(TCL_LD_FLAGS)
+ AC_SUBST(TCL_SHLIB_LD_LIBS)
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_TKCONFIG --
+#
+# Load the tkConfig.sh file
+#
+# Arguments:
+#
+# Requires the following vars to be set:
+# TK_BIN_DIR
+#
+# Results:
+#
+# Sets the following vars that should be in tkConfig.sh:
+# TK_BIN_DIR
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LOAD_TKCONFIG], [
+ AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])
+
+ if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
+ AC_MSG_RESULT([loading])
+ . "${TK_BIN_DIR}/tkConfig.sh"
+ else
+ AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
+ fi
+
+ # eval is required to do the TK_DBGX substitution
+ eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
+ eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""
+
+ # If the TK_BIN_DIR is the build directory (not the install directory),
+ # then set the common variable name to the value of the build variables.
+ # For example, the variable TK_LIB_SPEC will be set to the value
+ # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
+ # instead of TK_BUILD_LIB_SPEC since it will work with both an
+ # installed and uninstalled version of Tcl.
+ if test -f "${TK_BIN_DIR}/Makefile" ; then
+ TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}"
+ TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}"
+ TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}"
+ elif test "`uname -s`" = "Darwin"; then
+ # If Tk was built as a framework, attempt to use the libraries
+ # from the framework at the given location so that linking works
+ # against Tk.framework installed in an arbitrary location.
+ case ${TK_DEFS} in
+ *TK_FRAMEWORK*)
+ if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then
+ for i in "`cd "${TK_BIN_DIR}"; pwd`" \
+ "`cd "${TK_BIN_DIR}"/../..; pwd`"; do
+ if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then
+ TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}"
+ break
+ fi
+ done
+ fi
+ if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then
+ TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}"
+ TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"
+ fi
+ ;;
+ esac
+ fi
+
+ # eval is required to do the TK_DBGX substitution
+ eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
+ eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
+ eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
+ eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""
+
+ # TEA specific: Ensure windowingsystem is defined
+ if test "${TEA_PLATFORM}" = "unix" ; then
+ case ${TK_DEFS} in
+ *MAC_OSX_TK*)
+ AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?])
+ TEA_WINDOWINGSYSTEM="aqua"
+ ;;
+ *)
+ TEA_WINDOWINGSYSTEM="x11"
+ ;;
+ esac
+ elif test "${TEA_PLATFORM}" = "windows" ; then
+ TEA_WINDOWINGSYSTEM="win32"
+ fi
+
+ AC_SUBST(TK_VERSION)
+ AC_SUBST(TK_BIN_DIR)
+ AC_SUBST(TK_SRC_DIR)
+
+ AC_SUBST(TK_LIB_FILE)
+ AC_SUBST(TK_LIB_FLAG)
+ AC_SUBST(TK_LIB_SPEC)
+
+ AC_SUBST(TK_STUB_LIB_FILE)
+ AC_SUBST(TK_STUB_LIB_FLAG)
+ AC_SUBST(TK_STUB_LIB_SPEC)
+
+ # TEA specific:
+ AC_SUBST(TK_LIBS)
+ AC_SUBST(TK_XINCLUDES)
+])
+
+#------------------------------------------------------------------------
+# TEA_PROG_TCLSH
+# Determine the fully qualified path name of the tclsh executable
+# in the Tcl build directory or the tclsh installed in a bin
+# directory. This macro will correctly determine the name
+# of the tclsh executable even if tclsh has not yet been
+# built in the build directory. The tclsh found is always
+# associated with a tclConfig.sh file. This tclsh should be used
+# only for running extension test cases. It should never be
+# or generation of files (like pkgIndex.tcl) at build time.
+#
+# Arguments
+# none
+#
+# Results
+# Subst's the following values:
+# TCLSH_PROG
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PROG_TCLSH], [
+ AC_MSG_CHECKING([for tclsh])
+ if test -f "${TCL_BIN_DIR}/Makefile" ; then
+ # tclConfig.sh is in Tcl build directory
+ if test "${TEA_PLATFORM}" = "windows"; then
+ TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
+ else
+ TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
+ fi
+ else
+ # tclConfig.sh is in install location
+ if test "${TEA_PLATFORM}" = "windows"; then
+ TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
+ else
+ TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
+ fi
+ list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
+ `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \
+ `ls -d ${TCL_PREFIX}/bin 2>/dev/null`"
+ for i in $list ; do
+ if test -f "$i/${TCLSH_PROG}" ; then
+ REAL_TCL_BIN_DIR="`cd "$i"; pwd`/"
+ break
+ fi
+ done
+ TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}"
+ fi
+ AC_MSG_RESULT([${TCLSH_PROG}])
+ AC_SUBST(TCLSH_PROG)
+])
+
+#------------------------------------------------------------------------
+# TEA_PROG_WISH
+# Determine the fully qualified path name of the wish executable
+# in the Tk build directory or the wish installed in a bin
+# directory. This macro will correctly determine the name
+# of the wish executable even if wish has not yet been
+# built in the build directory. The wish found is always
+# associated with a tkConfig.sh file. This wish should be used
+# only for running extension test cases. It should never be
+# or generation of files (like pkgIndex.tcl) at build time.
+#
+# Arguments
+# none
+#
+# Results
+# Subst's the following values:
+# WISH_PROG
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PROG_WISH], [
+ AC_MSG_CHECKING([for wish])
+ if test -f "${TK_BIN_DIR}/Makefile" ; then
+ # tkConfig.sh is in Tk build directory
+ if test "${TEA_PLATFORM}" = "windows"; then
+ WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
+ else
+ WISH_PROG="${TK_BIN_DIR}/wish"
+ fi
+ else
+ # tkConfig.sh is in install location
+ if test "${TEA_PLATFORM}" = "windows"; then
+ WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
+ else
+ WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}"
+ fi
+ list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \
+ `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \
+ `ls -d ${TK_PREFIX}/bin 2>/dev/null`"
+ for i in $list ; do
+ if test -f "$i/${WISH_PROG}" ; then
+ REAL_TK_BIN_DIR="`cd "$i"; pwd`/"
+ break
+ fi
+ done
+ WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}"
+ fi
+ AC_MSG_RESULT([${WISH_PROG}])
+ AC_SUBST(WISH_PROG)
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_SHARED --
+#
+# Allows the building of shared libraries
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --enable-shared=yes|no
+#
+# Defines the following vars:
+# STATIC_BUILD Used for building import/export libraries
+# on Windows.
+#
+# Sets the following vars:
+# SHARED_BUILD Value of 1 or 0
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_SHARED], [
+ AC_MSG_CHECKING([how to build libraries])
+ AC_ARG_ENABLE(shared,
+ AC_HELP_STRING([--enable-shared],
+ [build and link with shared libraries (default: on)]),
+ [tcl_ok=$enableval], [tcl_ok=yes])
+
+ if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ tcl_ok=$enableval
+ else
+ tcl_ok=yes
+ fi
+
+ if test "$tcl_ok" = "yes" ; then
+ AC_MSG_RESULT([shared])
+ SHARED_BUILD=1
+ else
+ AC_MSG_RESULT([static])
+ SHARED_BUILD=0
+ AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?])
+ fi
+ AC_SUBST(SHARED_BUILD)
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_THREADS --
+#
+# Specify if thread support should be enabled. If "yes" is specified
+# as an arg (optional), threads are enabled by default, "no" means
+# threads are disabled. "yes" is the default.
+#
+# TCL_THREADS is checked so that if you are compiling an extension
+# against a threaded core, your extension must be compiled threaded
+# as well.
+#
+# Note that it is legal to have a thread enabled extension run in a
+# threaded or non-threaded Tcl core, but a non-threaded extension may
+# only run in a non-threaded Tcl core.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --enable-threads
+#
+# Sets the following vars:
+# THREADS_LIBS Thread library(s)
+#
+# Defines the following vars:
+# TCL_THREADS
+# _REENTRANT
+# _THREAD_SAFE
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_THREADS], [
+ AC_ARG_ENABLE(threads,
+ AC_HELP_STRING([--enable-threads],
+ [build with threads]),
+ [tcl_ok=$enableval], [tcl_ok=yes])
+
+ if test "${enable_threads+set}" = set; then
+ enableval="$enable_threads"
+ tcl_ok=$enableval
+ else
+ tcl_ok=yes
+ fi
+
+ if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then
+ TCL_THREADS=1
+
+ if test "${TEA_PLATFORM}" != "windows" ; then
+ # We are always OK on Windows, so check what this platform wants:
+
+ # USE_THREAD_ALLOC tells us to try the special thread-based
+ # allocator that significantly reduces lock contention
+ AC_DEFINE(USE_THREAD_ALLOC, 1,
+ [Do we want to use the threaded memory allocator?])
+ AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
+ if test "`uname -s`" = "SunOS" ; then
+ AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
+ [Do we really want to follow the standard? Yes we do!])
+ fi
+ AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?])
+ AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
+ if test "$tcl_ok" = "no"; then
+ # Check a little harder for __pthread_mutex_init in the same
+ # library, as some systems hide it there until pthread.h is
+ # defined. We could alternatively do an AC_TRY_COMPILE with
+ # pthread.h, but that will work with libpthread really doesn't
+ # exist, like AIX 4.2. [Bug: 4359]
+ AC_CHECK_LIB(pthread, __pthread_mutex_init,
+ tcl_ok=yes, tcl_ok=no)
+ fi
+
+ if test "$tcl_ok" = "yes"; then
+ # The space is needed
+ THREADS_LIBS=" -lpthread"
+ else
+ AC_CHECK_LIB(pthreads, pthread_mutex_init,
+ tcl_ok=yes, tcl_ok=no)
+ if test "$tcl_ok" = "yes"; then
+ # The space is needed
+ THREADS_LIBS=" -lpthreads"
+ else
+ AC_CHECK_LIB(c, pthread_mutex_init,
+ tcl_ok=yes, tcl_ok=no)
+ if test "$tcl_ok" = "no"; then
+ AC_CHECK_LIB(c_r, pthread_mutex_init,
+ tcl_ok=yes, tcl_ok=no)
+ if test "$tcl_ok" = "yes"; then
+ # The space is needed
+ THREADS_LIBS=" -pthread"
+ else
+ TCL_THREADS=0
+ AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled])
+ fi
+ fi
+ fi
+ fi
+ fi
+ else
+ TCL_THREADS=0
+ fi
+ # Do checking message here to not mess up interleaved configure output
+ AC_MSG_CHECKING([for building with threads])
+ if test "${TCL_THREADS}" = 1; then
+ AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?])
+ AC_MSG_RESULT([yes (default)])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ # TCL_THREADS sanity checking. See if our request for building with
+ # threads is the same as the way Tcl was built. If not, warn the user.
+ case ${TCL_DEFS} in
+ *THREADS=1*)
+ if test "${TCL_THREADS}" = "0"; then
+ AC_MSG_WARN([
+ Building ${PACKAGE_NAME} without threads enabled, but building against Tcl
+ that IS thread-enabled. It is recommended to use --enable-threads.])
+ fi
+ ;;
+ *)
+ if test "${TCL_THREADS}" = "1"; then
+ AC_MSG_WARN([
+ --enable-threads requested, but building against a Tcl that is NOT
+ thread-enabled. This is an OK configuration that will also run in
+ a thread-enabled core.])
+ fi
+ ;;
+ esac
+ AC_SUBST(TCL_THREADS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_SYMBOLS --
+#
+# Specify if debugging symbols should be used.
+# Memory (TCL_MEM_DEBUG) debugging can also be enabled.
+#
+# Arguments:
+# none
+#
+# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives
+# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted.
+# Requires the following vars to be set in the Makefile:
+# CFLAGS_DEFAULT
+# LDFLAGS_DEFAULT
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --enable-symbols
+#
+# Defines the following vars:
+# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true
+# Sets to $(CFLAGS_OPTIMIZE) if false
+# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true
+# Sets to $(LDFLAGS_OPTIMIZE) if false
+# DBGX Formerly used as debug library extension;
+# always blank now.
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_SYMBOLS], [
+ dnl TEA specific: Make sure we are initialized
+ AC_REQUIRE([TEA_CONFIG_CFLAGS])
+ AC_MSG_CHECKING([for build with symbols])
+ AC_ARG_ENABLE(symbols,
+ AC_HELP_STRING([--enable-symbols],
+ [build with debugging symbols (default: off)]),
+ [tcl_ok=$enableval], [tcl_ok=no])
+ DBGX=""
+ if test "$tcl_ok" = "no"; then
+ CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
+ LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
+ AC_MSG_RESULT([no])
+ else
+ CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
+ LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
+ if test "$tcl_ok" = "yes"; then
+ AC_MSG_RESULT([yes (standard debugging)])
+ fi
+ fi
+ # TEA specific:
+ if test "${TEA_PLATFORM}" != "windows" ; then
+ LDFLAGS_DEFAULT="${LDFLAGS}"
+ fi
+ AC_SUBST(CFLAGS_DEFAULT)
+ AC_SUBST(LDFLAGS_DEFAULT)
+ AC_SUBST(TCL_DBGX)
+
+ if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
+ AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?])
+ fi
+
+ if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
+ if test "$tcl_ok" = "all"; then
+ AC_MSG_RESULT([enabled symbols mem debugging])
+ else
+ AC_MSG_RESULT([enabled $tcl_ok debugging])
+ fi
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_ENABLE_LANGINFO --
+#
+# Allows use of modern nl_langinfo check for better l10n.
+# This is only relevant for Unix.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --enable-langinfo=yes|no (default is yes)
+#
+# Defines the following vars:
+# HAVE_LANGINFO Triggers use of nl_langinfo if defined.
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_ENABLE_LANGINFO], [
+ AC_ARG_ENABLE(langinfo,
+ AC_HELP_STRING([--enable-langinfo],
+ [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]),
+ [langinfo_ok=$enableval], [langinfo_ok=yes])
+
+ HAVE_LANGINFO=0
+ if test "$langinfo_ok" = "yes"; then
+ AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
+ fi
+ AC_MSG_CHECKING([whether to use nl_langinfo])
+ if test "$langinfo_ok" = "yes"; then
+ AC_CACHE_VAL(tcl_cv_langinfo_h, [
+ AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);],
+ [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])])
+ AC_MSG_RESULT([$tcl_cv_langinfo_h])
+ if test $tcl_cv_langinfo_h = yes; then
+ AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?])
+ fi
+ else
+ AC_MSG_RESULT([$langinfo_ok])
+ fi
+])
+
+#--------------------------------------------------------------------
+# TEA_CONFIG_SYSTEM
+#
+# Determine what the system is (some things cannot be easily checked
+# on a feature-driven basis, alas). This can usually be done via the
+# "uname" command.
+#
+# Arguments:
+# none
+#
+# Results:
+# Defines the following var:
+#
+# system - System/platform/version identification code.
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_CONFIG_SYSTEM], [
+ AC_CACHE_CHECK([system version], tcl_cv_sys_version, [
+ # TEA specific:
+ if test "${TEA_PLATFORM}" = "windows" ; then
+ tcl_cv_sys_version=windows
+ else
+ tcl_cv_sys_version=`uname -s`-`uname -r`
+ if test "$?" -ne 0 ; then
+ AC_MSG_WARN([can't find uname command])
+ tcl_cv_sys_version=unknown
+ else
+ if test "`uname -s`" = "AIX" ; then
+ tcl_cv_sys_version=AIX-`uname -v`.`uname -r`
+ fi
+ fi
+ fi
+ ])
+ system=$tcl_cv_sys_version
+])
+
+#--------------------------------------------------------------------
+# TEA_CONFIG_CFLAGS
+#
+# Try to determine the proper flags to pass to the compiler
+# for building shared libraries and other such nonsense.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Defines and substitutes the following vars:
+#
+# DL_OBJS, DL_LIBS - removed for TEA, only needed by core.
+# LDFLAGS - Flags to pass to the compiler when linking object
+# files into an executable application binary such
+# as tclsh.
+# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
+# that tell the run-time dynamic linker where to look
+# for shared libraries such as libtcl.so. Depends on
+# the variable LIB_RUNTIME_DIR in the Makefile. Could
+# be the same as CC_SEARCH_FLAGS if ${CC} is used to link.
+# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib",
+# that tell the run-time dynamic linker where to look
+# for shared libraries such as libtcl.so. Depends on
+# the variable LIB_RUNTIME_DIR in the Makefile.
+# SHLIB_CFLAGS - Flags to pass to cc when compiling the components
+# of a shared library (may request position-independent
+# code, among other things).
+# SHLIB_LD - Base command to use for combining object files
+# into a shared library.
+# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
+# creating shared libraries. This symbol typically
+# goes at the end of the "ld" commands that build
+# shared libraries. The value of the symbol defaults to
+# "${LIBS}" if all of the dependent libraries should
+# be specified when creating a shared library. If
+# dependent libraries should not be specified (as on
+# SunOS 4.x, where they cause the link to fail, or in
+# general if Tcl and Tk aren't themselves shared
+# libraries), then this symbol has an empty string
+# as its value.
+# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable
+# extensions. An empty string means we don't know how
+# to use shared libraries on this platform.
+# LIB_SUFFIX - Specifies everything that comes after the "libfoo"
+# in a static or shared library name, using the $VERSION variable
+# to put the version in the right place. This is used
+# by platforms that need non-standard library names.
+# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs
+# to have a version after the .so, and ${VERSION}.a
+# on AIX, since a shared library needs to have
+# a .a extension whereas shared objects for loadable
+# extensions have a .so extension. Defaults to
+# ${VERSION}${SHLIB_SUFFIX}.
+# CFLAGS_DEBUG -
+# Flags used when running the compiler in debug mode
+# CFLAGS_OPTIMIZE -
+# Flags used when running the compiler in optimize mode
+# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit)
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_CONFIG_CFLAGS], [
+ dnl TEA specific: Make sure we are initialized
+ AC_REQUIRE([TEA_INIT])
+
+ # Step 0.a: Enable 64 bit support?
+
+ AC_MSG_CHECKING([if 64bit support is requested])
+ AC_ARG_ENABLE(64bit,
+ AC_HELP_STRING([--enable-64bit],
+ [enable 64bit support (default: off)]),
+ [do64bit=$enableval], [do64bit=no])
+ AC_MSG_RESULT([$do64bit])
+
+ # Step 0.b: Enable Solaris 64 bit VIS support?
+
+ AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
+ AC_ARG_ENABLE(64bit-vis,
+ AC_HELP_STRING([--enable-64bit-vis],
+ [enable 64bit Sparc VIS support (default: off)]),
+ [do64bitVIS=$enableval], [do64bitVIS=no])
+ AC_MSG_RESULT([$do64bitVIS])
+ # Force 64bit on with VIS
+ AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes])
+
+ # Step 0.c: Check if visibility support is available. Do this here so
+ # that platform specific alternatives can be used below if this fails.
+
+ AC_CACHE_CHECK([if compiler supports visibility "hidden"],
+ tcl_cv_cc_visibility_hidden, [
+ hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror"
+ AC_TRY_LINK([
+ extern __attribute__((__visibility__("hidden"))) void f(void);
+ void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes,
+ tcl_cv_cc_visibility_hidden=no)
+ CFLAGS=$hold_cflags])
+ AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [
+ AC_DEFINE(MODULE_SCOPE,
+ [extern __attribute__((__visibility__("hidden")))],
+ [Compiler support for module scope symbols])
+ ])
+
+ # Step 0.d: Disable -rpath support?
+
+ AC_MSG_CHECKING([if rpath support is requested])
+ AC_ARG_ENABLE(rpath,
+ AC_HELP_STRING([--disable-rpath],
+ [disable rpath support (default: on)]),
+ [doRpath=$enableval], [doRpath=yes])
+ AC_MSG_RESULT([$doRpath])
+
+ # TEA specific: Cross-compiling options for Windows/CE builds?
+
+ AS_IF([test "${TEA_PLATFORM}" = windows], [
+ AC_MSG_CHECKING([if Windows/CE build is requested])
+ AC_ARG_ENABLE(wince,
+ AC_HELP_STRING([--enable-wince],
+ [enable Win/CE support (where applicable)]),
+ [doWince=$enableval], [doWince=no])
+ AC_MSG_RESULT([$doWince])
+ ])
+
+ # Set the variable "system" to hold the name and version number
+ # for the system.
+
+ TEA_CONFIG_SYSTEM
+
+ # Require ranlib early so we can override it in special cases below.
+
+ AC_REQUIRE([AC_PROG_RANLIB])
+
+ # Set configuration options based on system name and version.
+ # This is similar to Tcl's unix/tcl.m4 except that we've added a
+ # "windows" case and removed some core-only vars.
+
+ do64bit_ok=no
+ # default to '{$LIBS}' and set to "" on per-platform necessary basis
+ SHLIB_LD_LIBS='${LIBS}'
+ # When ld needs options to work in 64-bit mode, put them in
+ # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
+ # is disabled by the user. [Bug 1016796]
+ LDFLAGS_ARCH=""
+ UNSHARED_LIB_SUFFIX=""
+ # TEA specific: use PACKAGE_VERSION instead of VERSION
+ TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
+ ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
+ TCL_LIB_VERSIONS_OK=ok
+ CFLAGS_DEBUG=-g
+ CFLAGS_OPTIMIZE=-O
+ AS_IF([test "$GCC" = yes], [
+ # TEA specific:
+ CFLAGS_OPTIMIZE=-O2
+ CFLAGS_WARNING="-Wall"
+ ], [CFLAGS_WARNING=""])
+dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed.
+dnl AC_CHECK_TOOL(AR, ar)
+ AC_CHECK_PROG(AR, ar, ar)
+ STLIB_LD='${AR} cr'
+ LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
+ AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"])
+ case $system in
+ # TEA specific:
+ windows)
+ # This is a 2-stage check to make sure we have the 64-bit SDK
+ # We have to know where the SDK is installed.
+ # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs
+ # MACHINE is IX86 for LINK, but this is used by the manifest,
+ # which requires x86|amd64|ia64.
+ MACHINE="X86"
+ if test "$do64bit" != "no" ; then
+ if test "x${MSSDK}x" = "xx" ; then
+ MSSDK="C:/Progra~1/Microsoft Platform SDK"
+ fi
+ MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'`
+ PATH64=""
+ case "$do64bit" in
+ amd64|x64|yes)
+ MACHINE="AMD64" ; # default to AMD64 64-bit build
+ PATH64="${MSSDK}/Bin/Win64/x86/AMD64"
+ ;;
+ ia64)
+ MACHINE="IA64"
+ PATH64="${MSSDK}/Bin/Win64"
+ ;;
+ esac
+ if test ! -d "${PATH64}" ; then
+ AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode])
+ AC_MSG_WARN([Ensure latest Platform SDK is installed])
+ do64bit="no"
+ else
+ AC_MSG_RESULT([ Using 64-bit $MACHINE mode])
+ do64bit_ok="yes"
+ fi
+ fi
+
+ if test "$doWince" != "no" ; then
+ if test "$do64bit" != "no" ; then
+ AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
+ fi
+ if test "$GCC" = "yes" ; then
+ AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
+ fi
+ TEA_PATH_CELIB
+ # Set defaults for common evc4/PPC2003 setup
+ # Currently Tcl requires 300+, possibly 420+ for sockets
+ CEVERSION=420; # could be 211 300 301 400 420 ...
+ TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ...
+ ARCH=ARM; # could be ARM MIPS X86EM ...
+ PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002"
+ if test "$doWince" != "yes"; then
+ # If !yes then the user specified something
+ # Reset ARCH to allow user to skip specifying it
+ ARCH=
+ eval `echo $doWince | awk -F, '{ \
+ if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \
+ if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \
+ if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \
+ if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \
+ if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \
+ }'`
+ if test "x${ARCH}" = "x" ; then
+ ARCH=$TARGETCPU;
+ fi
+ fi
+ OSVERSION=WCE$CEVERSION;
+ if test "x${WCEROOT}" = "x" ; then
+ WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0"
+ if test ! -d "${WCEROOT}" ; then
+ WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
+ fi
+ fi
+ if test "x${SDKROOT}" = "x" ; then
+ SDKROOT="C:/Program Files/Windows CE Tools"
+ if test ! -d "${SDKROOT}" ; then
+ SDKROOT="C:/Windows CE Tools"
+ fi
+ fi
+ WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'`
+ SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'`
+ if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
+ -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
+ AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
+ doWince="no"
+ else
+ # We could PATH_NOSPACE these, but that's not important,
+ # as long as we quote them when used.
+ CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include"
+ if test -d "${CEINCLUDE}/${TARGETCPU}" ; then
+ CEINCLUDE="${CEINCLUDE}/${TARGETCPU}"
+ fi
+ CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"
+ fi
+ fi
+
+ if test "$GCC" != "yes" ; then
+ if test "${SHARED_BUILD}" = "0" ; then
+ runtime=-MT
+ else
+ runtime=-MD
+ fi
+
+ if test "$do64bit" != "no" ; then
+ # All this magic is necessary for the Win64 SDK RC1 - hobbs
+ CC="\"${PATH64}/cl.exe\""
+ CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\""
+ RC="\"${MSSDK}/bin/rc.exe\""
+ lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\""
+ LINKBIN="\"${PATH64}/link.exe\""
+ CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
+ CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
+ # Avoid 'unresolved external symbol __security_cookie'
+ # errors, c.f. http://support.microsoft.com/?id=894573
+ TEA_ADD_LIBS([bufferoverflowU.lib])
+ elif test "$doWince" != "no" ; then
+ CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin"
+ if test "${TARGETCPU}" = "X86"; then
+ CC="\"${CEBINROOT}/cl.exe\""
+ else
+ CC="\"${CEBINROOT}/cl${ARCH}.exe\""
+ fi
+ CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
+ RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\""
+ arch=`echo ${ARCH} | awk '{print tolower([$]0)}'`
+ defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS"
+ if test "${SHARED_BUILD}" = "1" ; then
+ # Static CE builds require static celib as well
+ defs="${defs} _DLL"
+ fi
+ for i in $defs ; do
+ AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i)
+ done
+ AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version])
+ AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version])
+ CFLAGS_DEBUG="-nologo -Zi -Od"
+ CFLAGS_OPTIMIZE="-nologo -Ox"
+ lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'`
+ lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo"
+ LINKBIN="\"${CEBINROOT}/link.exe\""
+ AC_SUBST(CELIB_DIR)
+ else
+ RC="rc"
+ lflags="-nologo"
+ LINKBIN="link"
+ CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
+ CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
+ fi
+ fi
+
+ if test "$GCC" = "yes"; then
+ # mingw gcc mode
+ RC="windres"
+ CFLAGS_DEBUG="-g"
+ CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
+ SHLIB_LD="$CC -shared"
+ UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+ LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
+ LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"
+ else
+ SHLIB_LD="${LINKBIN} -dll ${lflags}"
+ # link -lib only works when -lib is the first arg
+ STLIB_LD="${LINKBIN} -lib ${lflags}"
+ UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib'
+ PATHTYPE=-w
+ # For information on what debugtype is most useful, see:
+ # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
+ # and also
+ # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx
+ # This essentially turns it all on.
+ LDFLAGS_DEBUG="-debug -debugtype:cv"
+ LDFLAGS_OPTIMIZE="-release"
+ if test "$doWince" != "no" ; then
+ LDFLAGS_CONSOLE="-link ${lflags}"
+ LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
+ else
+ LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
+ LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
+ fi
+ fi
+
+ SHLIB_SUFFIX=".dll"
+ SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll'
+
+ TCL_LIB_VERSIONS_OK=nodots
+ ;;
+ AIX-*)
+ AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [
+ # AIX requires the _r compiler when gcc isn't being used
+ case "${CC}" in
+ *_r|*_r\ *)
+ # ok ...
+ ;;
+ *)
+ # Make sure only first arg gets _r
+ CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'`
+ ;;
+ esac
+ AC_MSG_RESULT([Using $CC for compiling with threads])
+ ])
+ LIBS="$LIBS -lc"
+ SHLIB_CFLAGS=""
+ SHLIB_SUFFIX=".so"
+
+ LD_LIBRARY_PATH_VAR="LIBPATH"
+
+ # Check to enable 64-bit flags for compiler/linker
+ AS_IF([test "$do64bit" = yes], [
+ AS_IF([test "$GCC" = yes], [
+ AC_MSG_WARN([64bit mode not supported with GCC on $system])
+ ], [
+ do64bit_ok=yes
+ CFLAGS="$CFLAGS -q64"
+ LDFLAGS_ARCH="-q64"
+ RANLIB="${RANLIB} -X64"
+ AR="${AR} -X64"
+ SHLIB_LD_FLAGS="-b64"
+ ])
+ ])
+
+ AS_IF([test "`uname -m`" = ia64], [
+ # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
+ SHLIB_LD="/usr/ccs/bin/ld -G -z text"
+ AS_IF([test "$GCC" = yes], [
+ CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+ ], [
+ CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
+ ])
+ LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
+ ], [
+ AS_IF([test "$GCC" = yes], [
+ SHLIB_LD='${CC} -shared -Wl,-bexpall'
+ ], [
+ SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry"
+ LDFLAGS="$LDFLAGS -brtl"
+ ])
+ SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}"
+ CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ ])
+ ;;
+ BeOS*)
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_LD='${CC} -nostart'
+ SHLIB_SUFFIX=".so"
+
+ #-----------------------------------------------------------
+ # Check for inet_ntoa in -lbind, for BeOS (which also needs
+ # -lsocket, even if the network functions are in -lnet which
+ # is always linked to, for compatibility.
+ #-----------------------------------------------------------
+ AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"])
+ ;;
+ BSD/OS-4.*)
+ SHLIB_CFLAGS="-export-dynamic -fPIC"
+ SHLIB_LD='${CC} -shared'
+ SHLIB_SUFFIX=".so"
+ LDFLAGS="$LDFLAGS -export-dynamic"
+ CC_SEARCH_FLAGS=""
+ LD_SEARCH_FLAGS=""
+ ;;
+ CYGWIN_*)
+ SHLIB_CFLAGS=""
+ SHLIB_LD='${CC} -shared'
+ SHLIB_SUFFIX=".dll"
+ EXE_SUFFIX=".exe"
+ CC_SEARCH_FLAGS=""
+ LD_SEARCH_FLAGS=""
+ ;;
+ Haiku*)
+ LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_SUFFIX=".so"
+ SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}'
+ AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"])
+ ;;
+ HP-UX-*.11.*)
+ # Use updated header definitions where possible
+ AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?])
+ # TEA specific: Needed by Tcl, but not most extensions
+ #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?])
+ #LIBS="$LIBS -lxnet" # Use the XOPEN network library
+
+ AS_IF([test "`uname -m`" = ia64], [
+ SHLIB_SUFFIX=".so"
+ # Use newer C++ library for C++ extensions
+ #if test "$GCC" != "yes" ; then
+ # CPPFLAGS="-AA"
+ #fi
+ ], [
+ SHLIB_SUFFIX=".sl"
+ ])
+ AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
+ AS_IF([test "$tcl_ok" = yes], [
+ LDFLAGS="$LDFLAGS -E"
+ CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
+ LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
+ LD_LIBRARY_PATH_VAR="SHLIB_PATH"
+ ])
+ AS_IF([test "$GCC" = yes], [
+ SHLIB_LD='${CC} -shared'
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ ], [
+ CFLAGS="$CFLAGS -z"
+ # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
+ #CFLAGS="$CFLAGS +DAportable"
+ SHLIB_CFLAGS="+z"
+ SHLIB_LD="ld -b"
+ ])
+
+ # Check to enable 64-bit flags for compiler/linker
+ AS_IF([test "$do64bit" = "yes"], [
+ AS_IF([test "$GCC" = yes], [
+ case `${CC} -dumpmachine` in
+ hppa64*)
+ # 64-bit gcc in use. Fix flags for GNU ld.
+ do64bit_ok=yes
+ SHLIB_LD='${CC} -shared'
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ ;;
+ *)
+ AC_MSG_WARN([64bit mode not supported with GCC on $system])
+ ;;
+ esac
+ ], [
+ do64bit_ok=yes
+ CFLAGS="$CFLAGS +DD64"
+ LDFLAGS_ARCH="+DD64"
+ ])
+ ]) ;;
+ IRIX-6.*)
+ SHLIB_CFLAGS=""
+ SHLIB_LD="ld -n32 -shared -rdata_shared"
+ SHLIB_SUFFIX=".so"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+ AS_IF([test "$GCC" = yes], [
+ CFLAGS="$CFLAGS -mabi=n32"
+ LDFLAGS="$LDFLAGS -mabi=n32"
+ ], [
+ case $system in
+ IRIX-6.3)
+ # Use to build 6.2 compatible binaries on 6.3.
+ CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS"
+ ;;
+ *)
+ CFLAGS="$CFLAGS -n32"
+ ;;
+ esac
+ LDFLAGS="$LDFLAGS -n32"
+ ])
+ ;;
+ IRIX64-6.*)
+ SHLIB_CFLAGS=""
+ SHLIB_LD="ld -n32 -shared -rdata_shared"
+ SHLIB_SUFFIX=".so"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+
+ # Check to enable 64-bit flags for compiler/linker
+
+ AS_IF([test "$do64bit" = yes], [
+ AS_IF([test "$GCC" = yes], [
+ AC_MSG_WARN([64bit mode not supported by gcc])
+ ], [
+ do64bit_ok=yes
+ SHLIB_LD="ld -64 -shared -rdata_shared"
+ CFLAGS="$CFLAGS -64"
+ LDFLAGS_ARCH="-64"
+ ])
+ ])
+ ;;
+ Linux*)
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_SUFFIX=".so"
+
+ # TEA specific:
+ CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
+
+ # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
+ SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}'
+ LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
+ AS_IF([test $do64bit = yes], [
+ AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [
+ hold_cflags=$CFLAGS
+ CFLAGS="$CFLAGS -m64"
+ AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no)
+ CFLAGS=$hold_cflags])
+ AS_IF([test $tcl_cv_cc_m64 = yes], [
+ CFLAGS="$CFLAGS -m64"
+ do64bit_ok=yes
+ ])
+ ])
+
+ # The combo of gcc + glibc has a bug related to inlining of
+ # functions like strtod(). The -fno-builtin flag should address
+ # this problem but it does not work. The -fno-inline flag is kind
+ # of overkill but it works. Disable inlining only when one of the
+ # files in compat/*.c is being linked in.
+
+ AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"])
+
+ ;;
+ GNU*)
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_SUFFIX=".so"
+
+ SHLIB_LD='${CC} -shared'
+ LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+ CC_SEARCH_FLAGS=""
+ LD_SEARCH_FLAGS=""
+ AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
+ ;;
+ Lynx*)
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_SUFFIX=".so"
+ CFLAGS_OPTIMIZE=-02
+ SHLIB_LD='${CC} -shared'
+ LD_FLAGS="-Wl,--export-dynamic"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+ ;;
+ OpenBSD-*)
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
+ SHLIB_SUFFIX=".so"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}'
+ AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [
+ AC_EGREP_CPP(yes, [
+#ifdef __ELF__
+ yes
+#endif
+ ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)])
+ AS_IF([test $tcl_cv_ld_elf = yes], [
+ LDFLAGS=-Wl,-export-dynamic
+ ], [LDFLAGS=""])
+ AS_IF([test "${TCL_THREADS}" = "1"], [
+ # OpenBSD builds and links with -pthread, never -lpthread.
+ LIBS=`echo $LIBS | sed s/-lpthread//`
+ CFLAGS="$CFLAGS -pthread"
+ SHLIB_CFLAGS="$SHLIB_CFLAGS -pthread"
+ ])
+ # OpenBSD doesn't do version numbers with dots.
+ UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+ TCL_LIB_VERSIONS_OK=nodots
+ ;;
+ NetBSD-*|FreeBSD-[[3-4]].*)
+ # FreeBSD 3.* and greater have ELF.
+ # NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
+ SHLIB_SUFFIX=".so"
+ LDFLAGS="$LDFLAGS -export-dynamic"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ AS_IF([test "${TCL_THREADS}" = "1"], [
+ # The -pthread needs to go in the CFLAGS, not LIBS
+ LIBS=`echo $LIBS | sed s/-pthread//`
+ CFLAGS="$CFLAGS -pthread"
+ LDFLAGS="$LDFLAGS -pthread"
+ ])
+ case $system in
+ FreeBSD-3.*)
+ # FreeBSD-3 doesn't handle version numbers with dots.
+ UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+ SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so'
+ TCL_LIB_VERSIONS_OK=nodots
+ ;;
+ esac
+ ;;
+ FreeBSD-*)
+ # This configuration from FreeBSD Ports.
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_LD="${CC} -shared"
+ TCL_SHLIB_LD_EXTRAS="-soname \$[@]"
+ SHLIB_SUFFIX=".so"
+ LDFLAGS=""
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+ AS_IF([test "${TCL_THREADS}" = "1"], [
+ # The -pthread needs to go in the LDFLAGS, not LIBS
+ LIBS=`echo $LIBS | sed s/-pthread//`
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LDFLAGS="$LDFLAGS $PTHREAD_LIBS"])
+ # Version numbers are dot-stripped by system policy.
+ TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .`
+ UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
+ SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1'
+ TCL_LIB_VERSIONS_OK=nodots
+ ;;
+ Darwin-*)
+ CFLAGS_OPTIMIZE="-Os"
+ SHLIB_CFLAGS="-fno-common"
+ # To avoid discrepancies between what headers configure sees during
+ # preprocessing tests and compiling tests, move any -isysroot and
+ # -mmacosx-version-min flags from CFLAGS to CPPFLAGS:
+ CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \
+ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
+ if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`"
+ CFLAGS="`echo " ${CFLAGS}" | \
+ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
+ if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`"
+ AS_IF([test $do64bit = yes], [
+ case `arch` in
+ ppc)
+ AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag],
+ tcl_cv_cc_arch_ppc64, [
+ hold_cflags=$CFLAGS
+ CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
+ AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes,
+ tcl_cv_cc_arch_ppc64=no)
+ CFLAGS=$hold_cflags])
+ AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [
+ CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
+ do64bit_ok=yes
+ ]);;
+ i386)
+ AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag],
+ tcl_cv_cc_arch_x86_64, [
+ hold_cflags=$CFLAGS
+ CFLAGS="$CFLAGS -arch x86_64"
+ AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes,
+ tcl_cv_cc_arch_x86_64=no)
+ CFLAGS=$hold_cflags])
+ AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [
+ CFLAGS="$CFLAGS -arch x86_64"
+ do64bit_ok=yes
+ ]);;
+ *)
+ AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);;
+ esac
+ ], [
+ # Check for combined 32-bit and 64-bit fat build
+ AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \
+ && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [
+ fat_32_64=yes])
+ ])
+ # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
+ SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}'
+ AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [
+ hold_ldflags=$LDFLAGS
+ LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module"
+ AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no)
+ LDFLAGS=$hold_ldflags])
+ AS_IF([test $tcl_cv_ld_single_module = yes], [
+ SHLIB_LD="${SHLIB_LD} -Wl,-single_module"
+ ])
+ # TEA specific: link shlib with current and compatiblity version flags
+ vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d`
+ SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}"
+ SHLIB_SUFFIX=".dylib"
+ # Don't use -prebind when building for Mac OS X 10.4 or later only:
+ AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \
+ "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [
+ LDFLAGS="$LDFLAGS -prebind"])
+ LDFLAGS="$LDFLAGS -headerpad_max_install_names"
+ AC_CACHE_CHECK([if ld accepts -search_paths_first flag],
+ tcl_cv_ld_search_paths_first, [
+ hold_ldflags=$LDFLAGS
+ LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
+ AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes,
+ tcl_cv_ld_search_paths_first=no)
+ LDFLAGS=$hold_ldflags])
+ AS_IF([test $tcl_cv_ld_search_paths_first = yes], [
+ LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
+ ])
+ AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
+ AC_DEFINE(MODULE_SCOPE, [__private_extern__],
+ [Compiler support for module scope symbols])
+ tcl_cv_cc_visibility_hidden=yes
+ ])
+ CC_SEARCH_FLAGS=""
+ LD_SEARCH_FLAGS=""
+ LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
+ # TEA specific: for combined 32 & 64 bit fat builds of Tk
+ # extensions, verify that 64-bit build is possible.
+ AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [
+ AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [
+ AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [
+ for v in CFLAGS CPPFLAGS LDFLAGS; do
+ eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
+ done
+ CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include"
+ LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11"
+ AC_TRY_LINK([#include <X11/Xlib.h>], [XrmInitialize();],
+ tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no)
+ for v in CFLAGS CPPFLAGS LDFLAGS; do
+ eval $v'="$hold_'$v'"'
+ done])
+ ])
+ AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [
+ AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [
+ for v in CFLAGS CPPFLAGS LDFLAGS; do
+ eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
+ done
+ CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}"
+ LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}"
+ AC_TRY_LINK([#include <tk.h>], [Tk_InitStubs(NULL, "", 0);],
+ tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no)
+ for v in CFLAGS CPPFLAGS LDFLAGS; do
+ eval $v'="$hold_'$v'"'
+ done])
+ ])
+ # remove 64-bit arch flags from CFLAGS et al. if configuration
+ # does not support 64-bit.
+ AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [
+ AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags])
+ for v in CFLAGS CPPFLAGS LDFLAGS; do
+ eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"'
+ done])
+ ])
+ ;;
+ OS/390-*)
+ CFLAGS_OPTIMIZE="" # Optimizer is buggy
+ AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h
+ [Should OS/390 do the right thing with sockets?])
+ ;;
+ OSF1-V*)
+ # Digital OSF/1
+ SHLIB_CFLAGS=""
+ AS_IF([test "$SHARED_BUILD" = 1], [
+ SHLIB_LD='ld -shared -expect_unresolved "*"'
+ ], [
+ SHLIB_LD='ld -non_shared -expect_unresolved "*"'
+ ])
+ SHLIB_SUFFIX=".so"
+ AS_IF([test $doRpath = yes], [
+ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
+ AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [
+ CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"])
+ # see pthread_intro(3) for pthread support on osf1, k.furukawa
+ AS_IF([test "${TCL_THREADS}" = 1], [
+ CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
+ CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
+ LIBS=`echo $LIBS | sed s/-lpthreads//`
+ AS_IF([test "$GCC" = yes], [
+ LIBS="$LIBS -lpthread -lmach -lexc"
+ ], [
+ CFLAGS="$CFLAGS -pthread"
+ LDFLAGS="$LDFLAGS -pthread"
+ ])
+ ])
+ ;;
+ QNX-6*)
+ # QNX RTP
+ # This may work for all QNX, but it was only reported for v6.
+ SHLIB_CFLAGS="-fPIC"
+ SHLIB_LD="ld -Bshareable -x"
+ SHLIB_LD_LIBS=""
+ SHLIB_SUFFIX=".so"
+ CC_SEARCH_FLAGS=""
+ LD_SEARCH_FLAGS=""
+ ;;
+ SCO_SV-3.2*)
+ AS_IF([test "$GCC" = yes], [
+ SHLIB_CFLAGS="-fPIC -melf"
+ LDFLAGS="$LDFLAGS -melf -Wl,-Bexport"
+ ], [
+ SHLIB_CFLAGS="-Kpic -belf"
+ LDFLAGS="$LDFLAGS -belf -Wl,-Bexport"
+ ])
+ SHLIB_LD="ld -G"
+ SHLIB_LD_LIBS=""
+ SHLIB_SUFFIX=".so"
+ CC_SEARCH_FLAGS=""
+ LD_SEARCH_FLAGS=""
+ ;;
+ SunOS-5.[[0-6]])
+ # Careful to not let 5.10+ fall into this case
+
+ # Note: If _REENTRANT isn't defined, then Solaris
+ # won't define thread-safe library routines.
+
+ AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
+ AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
+ [Do we really want to follow the standard? Yes we do!])
+
+ SHLIB_CFLAGS="-KPIC"
+ SHLIB_SUFFIX=".so"
+ AS_IF([test "$GCC" = yes], [
+ SHLIB_LD='${CC} -shared'
+ CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ ], [
+ SHLIB_LD="/usr/ccs/bin/ld -G -z text"
+ CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ ])
+ ;;
+ SunOS-5*)
+ # Note: If _REENTRANT isn't defined, then Solaris
+ # won't define thread-safe library routines.
+
+ AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
+ AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
+ [Do we really want to follow the standard? Yes we do!])
+
+ SHLIB_CFLAGS="-KPIC"
+
+ # Check to enable 64-bit flags for compiler/linker
+ AS_IF([test "$do64bit" = yes], [
+ arch=`isainfo`
+ AS_IF([test "$arch" = "sparcv9 sparc"], [
+ AS_IF([test "$GCC" = yes], [
+ AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [
+ AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system])
+ ], [
+ do64bit_ok=yes
+ CFLAGS="$CFLAGS -m64 -mcpu=v9"
+ LDFLAGS="$LDFLAGS -m64 -mcpu=v9"
+ SHLIB_CFLAGS="-fPIC"
+ ])
+ ], [
+ do64bit_ok=yes
+ AS_IF([test "$do64bitVIS" = yes], [
+ CFLAGS="$CFLAGS -xarch=v9a"
+ LDFLAGS_ARCH="-xarch=v9a"
+ ], [
+ CFLAGS="$CFLAGS -xarch=v9"
+ LDFLAGS_ARCH="-xarch=v9"
+ ])
+ # Solaris 64 uses this as well
+ #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64"
+ ])
+ ], [AS_IF([test "$arch" = "amd64 i386"], [
+ AS_IF([test "$GCC" = yes], [
+ case $system in
+ SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
+ do64bit_ok=yes
+ CFLAGS="$CFLAGS -m64"
+ LDFLAGS="$LDFLAGS -m64";;
+ *)
+ AC_MSG_WARN([64bit mode not supported with GCC on $system]);;
+ esac
+ ], [
+ do64bit_ok=yes
+ case $system in
+ SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
+ CFLAGS="$CFLAGS -m64"
+ LDFLAGS="$LDFLAGS -m64";;
+ *)
+ CFLAGS="$CFLAGS -xarch=amd64"
+ LDFLAGS="$LDFLAGS -xarch=amd64";;
+ esac
+ ])
+ ], [AC_MSG_WARN([64bit mode not supported for $arch])])])
+ ])
+
+ SHLIB_SUFFIX=".so"
+ AS_IF([test "$GCC" = yes], [
+ SHLIB_LD='${CC} -shared'
+ CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ AS_IF([test "$do64bit_ok" = yes], [
+ AS_IF([test "$arch" = "sparcv9 sparc"], [
+ # We need to specify -static-libgcc or we need to
+ # add the path to the sparv9 libgcc.
+ # JH: static-libgcc is necessary for core Tcl, but may
+ # not be necessary for extensions.
+ SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc"
+ # for finding sparcv9 libgcc, get the regular libgcc
+ # path, remove so name and append 'sparcv9'
+ #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..."
+ #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir"
+ ], [AS_IF([test "$arch" = "amd64 i386"], [
+ # JH: static-libgcc is necessary for core Tcl, but may
+ # not be necessary for extensions.
+ SHLIB_LD="$SHLIB_LD -m64 -static-libgcc"
+ ])])
+ ])
+ ], [
+ case $system in
+ SunOS-5.[[1-9]][[0-9]]*)
+ # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
+ SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';;
+ *)
+ SHLIB_LD='/usr/ccs/bin/ld -G -z text';;
+ esac
+ CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+ LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
+ ])
+ ;;
+ esac
+
+ AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [
+ AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform])
+ ])
+
+dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so
+dnl # until the end of configure, as configure's compile and link tests use
+dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's
+dnl # preprocessing tests use only CPPFLAGS.
+ AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""])
+
+ # Add in the arch flags late to ensure it wasn't removed.
+ # Not necessary in TEA, but this is aligned with core
+ LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"
+
+ # If we're running gcc, then change the C flags for compiling shared
+ # libraries to the right flags for gcc, instead of those for the
+ # standard manufacturer compiler.
+
+ AS_IF([test "$GCC" = yes], [
+ case $system in
+ AIX-*) ;;
+ BSD/OS*) ;;
+ CYGWIN_*) ;;
+ IRIX*) ;;
+ NetBSD-*|FreeBSD-*|OpenBSD-*) ;;
+ Darwin-*) ;;
+ SCO_SV-3.2*) ;;
+ windows) ;;
+ *) SHLIB_CFLAGS="-fPIC" ;;
+ esac])
+
+ AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
+ AC_DEFINE(MODULE_SCOPE, [extern],
+ [No Compiler support for module scope symbols])
+ AC_DEFINE(NO_VIZ)
+ ])
+
+ AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [
+ # TEA specific: use PACKAGE_VERSION instead of VERSION
+ SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}'])
+ AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [
+ # TEA specific: use PACKAGE_VERSION instead of VERSION
+ UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a'])
+
+ AC_SUBST(CFLAGS_DEBUG)
+ AC_SUBST(CFLAGS_OPTIMIZE)
+ AC_SUBST(CFLAGS_WARNING)
+
+ AC_SUBST(STLIB_LD)
+ AC_SUBST(SHLIB_LD)
+
+ AC_SUBST(SHLIB_LD_LIBS)
+ AC_SUBST(SHLIB_CFLAGS)
+
+ AC_SUBST(LD_LIBRARY_PATH_VAR)
+
+ # These must be called after we do the basic CFLAGS checks and
+ # verify any possible 64-bit or similar switches are necessary
+ TEA_TCL_EARLY_FLAGS
+ TEA_TCL_64BIT_FLAGS
+])
+
+#--------------------------------------------------------------------
+# TEA_SERIAL_PORT
+#
+# Determine which interface to use to talk to the serial port.
+# Note that #include lines must begin in leftmost column for
+# some compilers to recognize them as preprocessor directives,
+# and some build environments have stdin not pointing at a
+# pseudo-terminal (usually /dev/null instead.)
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Defines only one of the following vars:
+# HAVE_SYS_MODEM_H
+# USE_TERMIOS
+# USE_TERMIO
+# USE_SGTTY
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_SERIAL_PORT], [
+ AC_CHECK_HEADERS(sys/modem.h)
+ AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [
+ AC_TRY_RUN([
+#include <termios.h>
+
+int main() {
+ struct termios t;
+ if (tcgetattr(0, &t) == 0) {
+ cfsetospeed(&t, 0);
+ t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
+ return 0;
+ }
+ return 1;
+}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+ if test $tcl_cv_api_serial = no ; then
+ AC_TRY_RUN([
+#include <termio.h>
+
+int main() {
+ struct termio t;
+ if (ioctl(0, TCGETA, &t) == 0) {
+ t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
+ return 0;
+ }
+ return 1;
+}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+ fi
+ if test $tcl_cv_api_serial = no ; then
+ AC_TRY_RUN([
+#include <sgtty.h>
+
+int main() {
+ struct sgttyb t;
+ if (ioctl(0, TIOCGETP, &t) == 0) {
+ t.sg_ospeed = 0;
+ t.sg_flags |= ODDP | EVENP | RAW;
+ return 0;
+ }
+ return 1;
+}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+ fi
+ if test $tcl_cv_api_serial = no ; then
+ AC_TRY_RUN([
+#include <termios.h>
+#include <errno.h>
+
+int main() {
+ struct termios t;
+ if (tcgetattr(0, &t) == 0
+ || errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
+ cfsetospeed(&t, 0);
+ t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
+ return 0;
+ }
+ return 1;
+}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+ fi
+ if test $tcl_cv_api_serial = no; then
+ AC_TRY_RUN([
+#include <termio.h>
+#include <errno.h>
+
+int main() {
+ struct termio t;
+ if (ioctl(0, TCGETA, &t) == 0
+ || errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
+ t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
+ return 0;
+ }
+ return 1;
+ }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
+ fi
+ if test $tcl_cv_api_serial = no; then
+ AC_TRY_RUN([
+#include <sgtty.h>
+#include <errno.h>
+
+int main() {
+ struct sgttyb t;
+ if (ioctl(0, TIOCGETP, &t) == 0
+ || errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
+ t.sg_ospeed = 0;
+ t.sg_flags |= ODDP | EVENP | RAW;
+ return 0;
+ }
+ return 1;
+}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
+ fi])
+ case $tcl_cv_api_serial in
+ termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);;
+ termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);;
+ sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);;
+ esac
+])
+
+#--------------------------------------------------------------------
+# TEA_MISSING_POSIX_HEADERS
+#
+# Supply substitutes for missing POSIX header files. Special
+# notes:
+# - stdlib.h doesn't define strtol, strtoul, or
+# strtod in some versions of SunOS
+# - some versions of string.h don't declare procedures such
+# as strstr
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Defines some of the following vars:
+# NO_DIRENT_H
+# NO_ERRNO_H
+# NO_VALUES_H
+# HAVE_LIMITS_H or NO_LIMITS_H
+# NO_STDLIB_H
+# NO_STRING_H
+# NO_SYS_WAIT_H
+# NO_DLFCN_H
+# HAVE_SYS_PARAM_H
+#
+# HAVE_STRING_H ?
+#
+# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
+# CHECK on limits.h
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [
+ AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [
+ AC_TRY_LINK([#include <sys/types.h>
+#include <dirent.h>], [
+#ifndef _POSIX_SOURCE
+# ifdef __Lynx__
+ /*
+ * Generate compilation error to make the test fail: Lynx headers
+ * are only valid if really in the POSIX environment.
+ */
+
+ missing_procedure();
+# endif
+#endif
+DIR *d;
+struct dirent *entryPtr;
+char *p;
+d = opendir("foobar");
+entryPtr = readdir(d);
+p = entryPtr->d_name;
+closedir(d);
+], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)])
+
+ if test $tcl_cv_dirent_h = no; then
+ AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?])
+ fi
+
+ # TEA specific:
+ AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])])
+ AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])])
+ AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])])
+ AC_CHECK_HEADER(limits.h,
+ [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])],
+ [AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])])
+ AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
+ AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
+ AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
+ AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
+ if test $tcl_ok = 0; then
+ AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?])
+ fi
+ AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
+ AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
+ AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
+
+ # See also memmove check below for a place where NO_STRING_H can be
+ # set and why.
+
+ if test $tcl_ok = 0; then
+ AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?])
+ fi
+
+ AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])])
+ AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])])
+
+ # OS/390 lacks sys/param.h (and doesn't need it, by chance).
+ AC_HAVE_HEADERS(sys/param.h)
+])
+
+#--------------------------------------------------------------------
+# TEA_PATH_X
+#
+# Locate the X11 header files and the X11 library archive. Try
+# the ac_path_x macro first, but if it doesn't find the X stuff
+# (e.g. because there's no xmkmf program) then check through
+# a list of possible directories. Under some conditions the
+# autoconf macro will return an include directory that contains
+# no include files, so double-check its result just to be safe.
+#
+# This should be called after TEA_CONFIG_CFLAGS as setting the
+# LIBS line can confuse some configure macro magic.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Sets the following vars:
+# XINCLUDES
+# XLIBSW
+# PKG_LIBS (appends to)
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_X], [
+ if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then
+ TEA_PATH_UNIX_X
+ fi
+])
+
+AC_DEFUN([TEA_PATH_UNIX_X], [
+ AC_PATH_X
+ not_really_there=""
+ if test "$no_x" = ""; then
+ if test "$x_includes" = ""; then
+ AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
+ else
+ if test ! -r $x_includes/X11/Intrinsic.h; then
+ not_really_there="yes"
+ fi
+ fi
+ fi
+ if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
+ AC_MSG_CHECKING([for X11 header files])
+ found_xincludes="no"
+ AC_TRY_CPP([#include <X11/Intrinsic.h>], found_xincludes="yes", found_xincludes="no")
+ if test "$found_xincludes" = "no"; then
+ dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
+ for i in $dirs ; do
+ if test -r $i/X11/Intrinsic.h; then
+ AC_MSG_RESULT([$i])
+ XINCLUDES=" -I$i"
+ found_xincludes="yes"
+ break
+ fi
+ done
+ fi
+ else
+ if test "$x_includes" != ""; then
+ XINCLUDES="-I$x_includes"
+ found_xincludes="yes"
+ fi
+ fi
+ if test "$found_xincludes" = "no"; then
+ AC_MSG_RESULT([couldn't find any!])
+ fi
+
+ if test "$no_x" = yes; then
+ AC_MSG_CHECKING([for X11 libraries])
+ XLIBSW=nope
+ dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
+ for i in $dirs ; do
+ if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then
+ AC_MSG_RESULT([$i])
+ XLIBSW="-L$i -lX11"
+ x_libraries="$i"
+ break
+ fi
+ done
+ else
+ if test "$x_libraries" = ""; then
+ XLIBSW=-lX11
+ else
+ XLIBSW="-L$x_libraries -lX11"
+ fi
+ fi
+ if test "$XLIBSW" = nope ; then
+ AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
+ fi
+ if test "$XLIBSW" = nope ; then
+ AC_MSG_RESULT([could not find any! Using -lX11.])
+ XLIBSW=-lX11
+ fi
+ # TEA specific:
+ if test x"${XLIBSW}" != x ; then
+ PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
+ fi
+])
+
+#--------------------------------------------------------------------
+# TEA_BLOCKING_STYLE
+#
+# The statements below check for systems where POSIX-style
+# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
+# On these systems (mostly older ones), use the old BSD-style
+# FIONBIO approach instead.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Defines some of the following vars:
+# HAVE_SYS_IOCTL_H
+# HAVE_SYS_FILIO_H
+# USE_FIONBIO
+# O_NONBLOCK
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_BLOCKING_STYLE], [
+ AC_CHECK_HEADERS(sys/ioctl.h)
+ AC_CHECK_HEADERS(sys/filio.h)
+ TEA_CONFIG_SYSTEM
+ AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
+ case $system in
+ OSF*)
+ AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
+ AC_MSG_RESULT([FIONBIO])
+ ;;
+ *)
+ AC_MSG_RESULT([O_NONBLOCK])
+ ;;
+ esac
+])
+
+#--------------------------------------------------------------------
+# TEA_TIME_HANDLER
+#
+# Checks how the system deals with time.h, what time structures
+# are used on the system, and what fields the structures have.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Defines some of the following vars:
+# USE_DELTA_FOR_TZ
+# HAVE_TM_GMTOFF
+# HAVE_TM_TZADJ
+# HAVE_TIMEZONE_VAR
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TIME_HANDLER], [
+ AC_CHECK_HEADERS(sys/time.h)
+ AC_HEADER_TIME
+ AC_STRUCT_TIMEZONE
+
+ AC_CHECK_FUNCS(gmtime_r localtime_r)
+
+ AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [
+ AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
+ tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)])
+ if test $tcl_cv_member_tm_tzadj = yes ; then
+ AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?])
+ fi
+
+ AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [
+ AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
+ tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)])
+ if test $tcl_cv_member_tm_gmtoff = yes ; then
+ AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?])
+ fi
+
+ #
+ # Its important to include time.h in this check, as some systems
+ # (like convex) have timezone functions, etc.
+ #
+ AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [
+ AC_TRY_COMPILE([#include <time.h>],
+ [extern long timezone;
+ timezone += 1;
+ exit (0);],
+ tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)])
+ if test $tcl_cv_timezone_long = yes ; then
+ AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
+ else
+ #
+ # On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
+ #
+ AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [
+ AC_TRY_COMPILE([#include <time.h>],
+ [extern time_t timezone;
+ timezone += 1;
+ exit (0);],
+ tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)])
+ if test $tcl_cv_timezone_time = yes ; then
+ AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
+ fi
+ fi
+])
+
+#--------------------------------------------------------------------
+# TEA_BUGGY_STRTOD
+#
+# Under Solaris 2.4, strtod returns the wrong value for the
+# terminating character under some conditions. Check for this
+# and if the problem exists use a substitute procedure
+# "fixstrtod" (provided by Tcl) that corrects the error.
+# Also, on Compaq's Tru64 Unix 5.0,
+# strtod(" ") returns 0.0 instead of a failure to convert.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Might defines some of the following vars:
+# strtod (=fixstrtod)
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_BUGGY_STRTOD], [
+ AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
+ if test "$tcl_strtod" = 1; then
+ AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[
+ AC_TRY_RUN([
+ extern double strtod();
+ int main() {
+ char *infString="Inf", *nanString="NaN", *spaceString=" ";
+ char *term;
+ double value;
+ value = strtod(infString, &term);
+ if ((term != infString) && (term[-1] == 0)) {
+ exit(1);
+ }
+ value = strtod(nanString, &term);
+ if ((term != nanString) && (term[-1] == 0)) {
+ exit(1);
+ }
+ value = strtod(spaceString, &term);
+ if (term == (spaceString+1)) {
+ exit(1);
+ }
+ exit(0);
+ }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy,
+ tcl_cv_strtod_buggy=buggy)])
+ if test "$tcl_cv_strtod_buggy" = buggy; then
+ AC_LIBOBJ([fixstrtod])
+ USE_COMPAT=1
+ AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?])
+ fi
+ fi
+])
+
+#--------------------------------------------------------------------
+# TEA_TCL_LINK_LIBS
+#
+# Search for the libraries needed to link the Tcl shell.
+# Things like the math library (-lm) and socket stuff (-lsocket vs.
+# -lnsl) are dealt with here.
+#
+# Arguments:
+# Requires the following vars to be set in the Makefile:
+# DL_LIBS (not in TEA, only needed in core)
+# LIBS
+# MATH_LIBS
+#
+# Results:
+#
+# Subst's the following var:
+# TCL_LIBS
+# MATH_LIBS
+#
+# Might append to the following vars:
+# LIBS
+#
+# Might define the following vars:
+# HAVE_NET_ERRNO_H
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TCL_LINK_LIBS], [
+ #--------------------------------------------------------------------
+ # On a few very rare systems, all of the libm.a stuff is
+ # already in libc.a. Set compiler flags accordingly.
+ # Also, Linux requires the "ieee" library for math to work
+ # right (and it must appear before "-lm").
+ #--------------------------------------------------------------------
+
+ AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
+ AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
+
+ #--------------------------------------------------------------------
+ # Interactive UNIX requires -linet instead of -lsocket, plus it
+ # needs net/errno.h to define the socket-related error codes.
+ #--------------------------------------------------------------------
+
+ AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
+ AC_CHECK_HEADER(net/errno.h, [
+ AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])])
+
+ #--------------------------------------------------------------------
+ # Check for the existence of the -lsocket and -lnsl libraries.
+ # The order here is important, so that they end up in the right
+ # order in the command line generated by make. Here are some
+ # special considerations:
+ # 1. Use "connect" and "accept" to check for -lsocket, and
+ # "gethostbyname" to check for -lnsl.
+ # 2. Use each function name only once: can't redo a check because
+ # autoconf caches the results of the last check and won't redo it.
+ # 3. Use -lnsl and -lsocket only if they supply procedures that
+ # aren't already present in the normal libraries. This is because
+ # IRIX 5.2 has libraries, but they aren't needed and they're
+ # bogus: they goof up name resolution if used.
+ # 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
+ # To get around this problem, check for both libraries together
+ # if -lsocket doesn't work by itself.
+ #--------------------------------------------------------------------
+
+ tcl_checkBoth=0
+ AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
+ if test "$tcl_checkSocket" = 1; then
+ AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
+ LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
+ fi
+ if test "$tcl_checkBoth" = 1; then
+ tk_oldLibs=$LIBS
+ LIBS="$LIBS -lsocket -lnsl"
+ AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
+ fi
+ AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
+ [LIBS="$LIBS -lnsl"])])
+
+ # TEA specific: Don't perform the eval of the libraries here because
+ # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS
+
+ TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
+ AC_SUBST(TCL_LIBS)
+ AC_SUBST(MATH_LIBS)
+])
+
+#--------------------------------------------------------------------
+# TEA_TCL_EARLY_FLAGS
+#
+# Check for what flags are needed to be passed so the correct OS
+# features are available.
+#
+# Arguments:
+# None
+#
+# Results:
+#
+# Might define the following vars:
+# _ISOC99_SOURCE
+# _LARGEFILE64_SOURCE
+# _LARGEFILE_SOURCE64
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TCL_EARLY_FLAG],[
+ AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
+ AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
+ AC_TRY_COMPILE([[#define ]$1[ 1
+]$2], $3,
+ [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
+ [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
+ if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
+ AC_DEFINE($1, 1, [Add the ]$1[ flag when building])
+ tcl_flags="$tcl_flags $1"
+ fi
+])
+
+AC_DEFUN([TEA_TCL_EARLY_FLAGS],[
+ AC_MSG_CHECKING([for required early compiler flags])
+ tcl_flags=""
+ TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
+ [char *p = (char *)strtoll; char *q = (char *)strtoull;])
+ TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
+ [struct stat64 buf; int i = stat64("/", &buf);])
+ TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>],
+ [char *p = (char *)open64;])
+ if test "x${tcl_flags}" = "x" ; then
+ AC_MSG_RESULT([none])
+ else
+ AC_MSG_RESULT([${tcl_flags}])
+ fi
+])
+
+#--------------------------------------------------------------------
+# TEA_TCL_64BIT_FLAGS
+#
+# Check for what is defined in the way of 64-bit features.
+#
+# Arguments:
+# None
+#
+# Results:
+#
+# Might define the following vars:
+# TCL_WIDE_INT_IS_LONG
+# TCL_WIDE_INT_TYPE
+# HAVE_STRUCT_DIRENT64
+# HAVE_STRUCT_STAT64
+# HAVE_TYPE_OFF64_T
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN([TEA_TCL_64BIT_FLAGS], [
+ AC_MSG_CHECKING([for 64-bit integer type])
+ AC_CACHE_VAL(tcl_cv_type_64bit,[
+ tcl_cv_type_64bit=none
+ # See if the compiler knows natively about __int64
+ AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
+ tcl_type_64bit=__int64, tcl_type_64bit="long long")
+ # See if we should use long anyway Note that we substitute in the
+ # type that is our current guess for a 64-bit type inside this check
+ # program, so it should be modified only carefully...
+ AC_TRY_COMPILE(,[switch (0) {
+ case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
+ }],tcl_cv_type_64bit=${tcl_type_64bit})])
+ if test "${tcl_cv_type_64bit}" = none ; then
+ AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?])
+ AC_MSG_RESULT([using long])
+ elif test "${tcl_cv_type_64bit}" = "__int64" \
+ -a "${TEA_PLATFORM}" = "windows" ; then
+ # TEA specific: We actually want to use the default tcl.h checks in
+ # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
+ AC_MSG_RESULT([using Tcl header defaults])
+ else
+ AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit},
+ [What type should be used to define wide integers?])
+ AC_MSG_RESULT([${tcl_cv_type_64bit}])
+
+ # Now check for auxiliary declarations
+ AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[
+ AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/dirent.h>],[struct dirent64 p;],
+ tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
+ if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
+ AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?])
+ fi
+
+ AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[
+ AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
+],
+ tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
+ if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
+ AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?])
+ fi
+
+ AC_CHECK_FUNCS(open64 lseek64)
+ AC_MSG_CHECKING([for off64_t])
+ AC_CACHE_VAL(tcl_cv_type_off64_t,[
+ AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
+],
+ tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
+ dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the
+ dnl functions lseek64 and open64 are defined.
+ if test "x${tcl_cv_type_off64_t}" = "xyes" && \
+ test "x${ac_cv_func_lseek64}" = "xyes" && \
+ test "x${ac_cv_func_open64}" = "xyes" ; then
+ AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?])
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ fi
+])
+
+##
+## Here ends the standard Tcl configuration bits and starts the
+## TEA specific functions
+##
+
+#------------------------------------------------------------------------
+# TEA_INIT --
+#
+# Init various Tcl Extension Architecture (TEA) variables.
+# This should be the first called TEA_* macro.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Defines and substs the following vars:
+# CYGPATH
+# EXEEXT
+# Defines only:
+# TEA_VERSION
+# TEA_INITED
+# TEA_PLATFORM (windows or unix)
+#
+# "cygpath" is used on windows to generate native path names for include
+# files. These variables should only be used with the compiler and linker
+# since they generate native path names.
+#
+# EXEEXT
+# Select the executable extension based on the host type. This
+# is a lightweight replacement for AC_EXEEXT that doesn't require
+# a compiler.
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_INIT], [
+ # TEA extensions pass this us the version of TEA they think they
+ # are compatible with.
+ TEA_VERSION="3.9"
+
+ AC_MSG_CHECKING([for correct TEA configuration])
+ if test x"${PACKAGE_NAME}" = x ; then
+ AC_MSG_ERROR([
+The PACKAGE_NAME variable must be defined by your TEA configure.in])
+ fi
+ if test x"$1" = x ; then
+ AC_MSG_ERROR([
+TEA version not specified.])
+ elif test "$1" != "${TEA_VERSION}" ; then
+ AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"])
+ else
+ AC_MSG_RESULT([ok (TEA ${TEA_VERSION})])
+ fi
+ case "`uname -s`" in
+ *win32*|*WIN32*|*MINGW32_*)
+ AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
+ EXEEXT=".exe"
+ TEA_PLATFORM="windows"
+ ;;
+ *CYGWIN_*)
+ CYGPATH=echo
+ EXEEXT=".exe"
+ # TEA_PLATFORM is determined later in LOAD_TCLCONFIG
+ ;;
+ *)
+ CYGPATH=echo
+ EXEEXT=""
+ TEA_PLATFORM="unix"
+ ;;
+ esac
+
+ # Check if exec_prefix is set. If not use fall back to prefix.
+ # Note when adjusted, so that TEA_PREFIX can correct for this.
+ # This is needed for recursive configures, since autoconf propagates
+ # $prefix, but not $exec_prefix (doh!).
+ if test x$exec_prefix = xNONE ; then
+ exec_prefix_default=yes
+ exec_prefix=$prefix
+ fi
+
+ AC_SUBST(EXEEXT)
+ AC_SUBST(CYGPATH)
+
+ # This package name must be replaced statically for AC_SUBST to work
+ AC_SUBST(PKG_LIB_FILE)
+ # Substitute STUB_LIB_FILE in case package creates a stub library too.
+ AC_SUBST(PKG_STUB_LIB_FILE)
+
+ # We AC_SUBST these here to ensure they are subst'ed,
+ # in case the user doesn't call TEA_ADD_...
+ AC_SUBST(PKG_STUB_SOURCES)
+ AC_SUBST(PKG_STUB_OBJECTS)
+ AC_SUBST(PKG_TCL_SOURCES)
+ AC_SUBST(PKG_HEADERS)
+ AC_SUBST(PKG_INCLUDES)
+ AC_SUBST(PKG_LIBS)
+ AC_SUBST(PKG_CFLAGS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_SOURCES --
+#
+# Specify one or more source files. Users should check for
+# the right platform before adding to their list.
+# It is not important to specify the directory, as long as it is
+# in the generic, win or unix subdirectory of $(srcdir).
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_SOURCES
+# PKG_OBJECTS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_SOURCES], [
+ vars="$@"
+ for i in $vars; do
+ case $i in
+ [\$]*)
+ # allow $-var names
+ PKG_SOURCES="$PKG_SOURCES $i"
+ PKG_OBJECTS="$PKG_OBJECTS $i"
+ ;;
+ *)
+ # check for existence - allows for generic/win/unix VPATH
+ # To add more dirs here (like 'src'), you have to update VPATH
+ # in Makefile.in as well
+ if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
+ -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
+ -a ! -f "${srcdir}/macosx/$i" \
+ ; then
+ AC_MSG_ERROR([could not find source file '$i'])
+ fi
+ PKG_SOURCES="$PKG_SOURCES $i"
+ # this assumes it is in a VPATH dir
+ i=`basename $i`
+ # handle user calling this before or after TEA_SETUP_COMPILER
+ if test x"${OBJEXT}" != x ; then
+ j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
+ else
+ j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
+ fi
+ PKG_OBJECTS="$PKG_OBJECTS $j"
+ ;;
+ esac
+ done
+ AC_SUBST(PKG_SOURCES)
+ AC_SUBST(PKG_OBJECTS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_STUB_SOURCES --
+#
+# Specify one or more source files. Users should check for
+# the right platform before adding to their list.
+# It is not important to specify the directory, as long as it is
+# in the generic, win or unix subdirectory of $(srcdir).
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_STUB_SOURCES
+# PKG_STUB_OBJECTS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_STUB_SOURCES], [
+ vars="$@"
+ for i in $vars; do
+ # check for existence - allows for generic/win/unix VPATH
+ if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
+ -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
+ -a ! -f "${srcdir}/macosx/$i" \
+ ; then
+ AC_MSG_ERROR([could not find stub source file '$i'])
+ fi
+ PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
+ # this assumes it is in a VPATH dir
+ i=`basename $i`
+ # handle user calling this before or after TEA_SETUP_COMPILER
+ if test x"${OBJEXT}" != x ; then
+ j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
+ else
+ j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
+ fi
+ PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
+ done
+ AC_SUBST(PKG_STUB_SOURCES)
+ AC_SUBST(PKG_STUB_OBJECTS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_TCL_SOURCES --
+#
+# Specify one or more Tcl source files. These should be platform
+# independent runtime files.
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_TCL_SOURCES
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_TCL_SOURCES], [
+ vars="$@"
+ for i in $vars; do
+ # check for existence, be strict because it is installed
+ if test ! -f "${srcdir}/$i" ; then
+ AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
+ fi
+ PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
+ done
+ AC_SUBST(PKG_TCL_SOURCES)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_HEADERS --
+#
+# Specify one or more source headers. Users should check for
+# the right platform before adding to their list.
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_HEADERS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_HEADERS], [
+ vars="$@"
+ for i in $vars; do
+ # check for existence, be strict because it is installed
+ if test ! -f "${srcdir}/$i" ; then
+ AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
+ fi
+ PKG_HEADERS="$PKG_HEADERS $i"
+ done
+ AC_SUBST(PKG_HEADERS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_INCLUDES --
+#
+# Specify one or more include dirs. Users should check for
+# the right platform before adding to their list.
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_INCLUDES
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_INCLUDES], [
+ vars="$@"
+ for i in $vars; do
+ PKG_INCLUDES="$PKG_INCLUDES $i"
+ done
+ AC_SUBST(PKG_INCLUDES)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_LIBS --
+#
+# Specify one or more libraries. Users should check for
+# the right platform before adding to their list. For Windows,
+# libraries provided in "foo.lib" format will be converted to
+# "-lfoo" when using GCC (mingw).
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_LIBS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_LIBS], [
+ vars="$@"
+ for i in $vars; do
+ if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
+ # Convert foo.lib to -lfoo for GCC. No-op if not *.lib
+ i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'`
+ fi
+ PKG_LIBS="$PKG_LIBS $i"
+ done
+ AC_SUBST(PKG_LIBS)
+])
+
+#------------------------------------------------------------------------
+# TEA_ADD_CFLAGS --
+#
+# Specify one or more CFLAGS. Users should check for
+# the right platform before adding to their list.
+#
+# Arguments:
+# one or more file names
+#
+# Results:
+#
+# Defines and substs the following vars:
+# PKG_CFLAGS
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_ADD_CFLAGS], [
+ PKG_CFLAGS="$PKG_CFLAGS $@"
+ AC_SUBST(PKG_CFLAGS)
+])
+
+#------------------------------------------------------------------------
+# TEA_PREFIX --
+#
+# Handle the --prefix=... option by defaulting to what Tcl gave
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# If --prefix or --exec-prefix was not specified, $prefix and
+# $exec_prefix will be set to the values given to Tcl when it was
+# configured.
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_PREFIX], [
+ if test "${prefix}" = "NONE"; then
+ prefix_default=yes
+ if test x"${TCL_PREFIX}" != x; then
+ AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
+ prefix=${TCL_PREFIX}
+ else
+ AC_MSG_NOTICE([--prefix defaulting to /usr/local])
+ prefix=/usr/local
+ fi
+ fi
+ if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
+ -o x"${exec_prefix_default}" = x"yes" ; then
+ if test x"${TCL_EXEC_PREFIX}" != x; then
+ AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
+ exec_prefix=${TCL_EXEC_PREFIX}
+ else
+ AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}])
+ exec_prefix=$prefix
+ fi
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_SETUP_COMPILER_CC --
+#
+# Do compiler checks the way we want. This is just a replacement
+# for AC_PROG_CC in TEA configure.in files to make them cleaner.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Sets up CC var and other standard bits we need to make executables.
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_SETUP_COMPILER_CC], [
+ # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
+ # in this macro, they need to go into TEA_SETUP_COMPILER instead.
+
+ # If the user did not set CFLAGS, set it now to keep
+ # the AC_PROG_CC macro from adding "-g -O2".
+ if test "${CFLAGS+set}" != "set" ; then
+ CFLAGS=""
+ fi
+
+ AC_PROG_CC
+ AC_PROG_CPP
+
+ AC_PROG_INSTALL
+
+ #--------------------------------------------------------------------
+ # Checks to see if the make program sets the $MAKE variable.
+ #--------------------------------------------------------------------
+
+ AC_PROG_MAKE_SET
+
+ #--------------------------------------------------------------------
+ # Find ranlib
+ #--------------------------------------------------------------------
+
+ AC_PROG_RANLIB
+
+ #--------------------------------------------------------------------
+ # Determines the correct binary file extension (.o, .obj, .exe etc.)
+ #--------------------------------------------------------------------
+
+ AC_OBJEXT
+ AC_EXEEXT
+])
+
+#------------------------------------------------------------------------
+# TEA_SETUP_COMPILER --
+#
+# Do compiler checks that use the compiler. This must go after
+# TEA_SETUP_COMPILER_CC, which does the actual compiler check.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Sets up CC var and other standard bits we need to make executables.
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_SETUP_COMPILER], [
+ # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
+ AC_REQUIRE([TEA_SETUP_COMPILER_CC])
+
+ #------------------------------------------------------------------------
+ # If we're using GCC, see if the compiler understands -pipe. If so, use it.
+ # It makes compiling go faster. (This is only a performance feature.)
+ #------------------------------------------------------------------------
+
+ if test -z "$no_pipe" -a -n "$GCC"; then
+ AC_CACHE_CHECK([if the compiler understands -pipe],
+ tcl_cv_cc_pipe, [
+ hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe"
+ AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no)
+ CFLAGS=$hold_cflags])
+ if test $tcl_cv_cc_pipe = yes; then
+ CFLAGS="$CFLAGS -pipe"
+ fi
+ fi
+
+ #--------------------------------------------------------------------
+ # Common compiler flag setup
+ #--------------------------------------------------------------------
+
+ AC_C_BIGENDIAN
+ if test "${TEA_PLATFORM}" = "unix" ; then
+ TEA_TCL_LINK_LIBS
+ TEA_MISSING_POSIX_HEADERS
+ # Let the user call this, because if it triggers, they will
+ # need a compat/strtod.c that is correct. Users can also
+ # use Tcl_GetDouble(FromObj) instead.
+ #TEA_BUGGY_STRTOD
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_MAKE_LIB --
+#
+# Generate a line that can be used to build a shared/unshared library
+# in a platform independent manner.
+#
+# Arguments:
+# none
+#
+# Requires:
+#
+# Results:
+#
+# Defines the following vars:
+# CFLAGS - Done late here to note disturb other AC macros
+# MAKE_LIB - Command to execute to build the Tcl library;
+# differs depending on whether or not Tcl is being
+# compiled as a shared library.
+# MAKE_SHARED_LIB Makefile rule for building a shared library
+# MAKE_STATIC_LIB Makefile rule for building a static library
+# MAKE_STUB_LIB Makefile rule for building a stub library
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_MAKE_LIB], [
+ if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
+ MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
+ MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
+ MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)"
+ else
+ MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
+ MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}"
+ MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
+ fi
+
+ if test "${SHARED_BUILD}" = "1" ; then
+ MAKE_LIB="${MAKE_SHARED_LIB} "
+ else
+ MAKE_LIB="${MAKE_STATIC_LIB} "
+ fi
+
+ #--------------------------------------------------------------------
+ # Shared libraries and static libraries have different names.
+ # Use the double eval to make sure any variables in the suffix is
+ # substituted. (@@@ Might not be necessary anymore)
+ #--------------------------------------------------------------------
+
+ if test "${TEA_PLATFORM}" = "windows" ; then
+ if test "${SHARED_BUILD}" = "1" ; then
+ # We force the unresolved linking of symbols that are really in
+ # the private libraries of Tcl and Tk.
+ SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
+ if test x"${TK_BIN_DIR}" != x ; then
+ SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
+ fi
+ eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
+ else
+ eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
+ fi
+ # Some packages build their own stubs libraries
+ eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
+ if test "$GCC" = "yes"; then
+ PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE}
+ fi
+ # These aren't needed on Windows (either MSVC or gcc)
+ RANLIB=:
+ RANLIB_STUB=:
+ else
+ RANLIB_STUB="${RANLIB}"
+ if test "${SHARED_BUILD}" = "1" ; then
+ SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
+ if test x"${TK_BIN_DIR}" != x ; then
+ SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
+ fi
+ eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
+ RANLIB=:
+ else
+ eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
+ fi
+ # Some packages build their own stubs libraries
+ eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
+ fi
+
+ # These are escaped so that only CFLAGS is picked up at configure time.
+ # The other values will be substituted at make time.
+ CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
+ if test "${SHARED_BUILD}" = "1" ; then
+ CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
+ fi
+
+ AC_SUBST(MAKE_LIB)
+ AC_SUBST(MAKE_SHARED_LIB)
+ AC_SUBST(MAKE_STATIC_LIB)
+ AC_SUBST(MAKE_STUB_LIB)
+ AC_SUBST(RANLIB_STUB)
+])
+
+#------------------------------------------------------------------------
+# TEA_LIB_SPEC --
+#
+# Compute the name of an existing object library located in libdir
+# from the given base name and produce the appropriate linker flags.
+#
+# Arguments:
+# basename The base name of the library without version
+# numbers, extensions, or "lib" prefixes.
+# extra_dir Extra directory in which to search for the
+# library. This location is used first, then
+# $prefix/$exec-prefix, then some defaults.
+#
+# Requires:
+# TEA_INIT and TEA_PREFIX must be called first.
+#
+# Results:
+#
+# Defines the following vars:
+# ${basename}_LIB_NAME The computed library name.
+# ${basename}_LIB_SPEC The computed linker flags.
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LIB_SPEC], [
+ AC_MSG_CHECKING([for $1 library])
+
+ # Look in exec-prefix for the library (defined by TEA_PREFIX).
+
+ tea_lib_name_dir="${exec_prefix}/lib"
+
+ # Or in a user-specified location.
+
+ if test x"$2" != x ; then
+ tea_extra_lib_dir=$2
+ else
+ tea_extra_lib_dir=NONE
+ fi
+
+ for i in \
+ `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
+ `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
+ `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
+ `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
+ `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
+ `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
+ `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \
+ `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \
+ `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
+ `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
+ if test -f "$i" ; then
+ tea_lib_name_dir=`dirname $i`
+ $1_LIB_NAME=`basename $i`
+ $1_LIB_PATH_NAME=$i
+ break
+ fi
+ done
+
+ if test "${TEA_PLATFORM}" = "windows"; then
+ $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
+ else
+ # Strip off the leading "lib" and trailing ".a" or ".so"
+
+ tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
+ $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
+ fi
+
+ if test "x${$1_LIB_NAME}" = x ; then
+ AC_MSG_ERROR([not found])
+ else
+ AC_MSG_RESULT([${$1_LIB_SPEC}])
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PRIVATE_TCL_HEADERS --
+#
+# Locate the private Tcl include files
+#
+# Arguments:
+#
+# Requires:
+# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has
+# already been called.
+#
+# Results:
+#
+# Substs the following vars:
+# TCL_TOP_DIR_NATIVE
+# TCL_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [
+ # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh}
+ AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS])
+ AC_MSG_CHECKING([for Tcl private include files])
+
+ TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}`
+ TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\"
+
+ # Check to see if tcl<Plat>Port.h isn't already with the public headers
+ # Don't look for tclInt.h because that resides with tcl.h in the core
+ # sources, but the <plat>Port headers are in a different directory
+ if test "${TEA_PLATFORM}" = "windows" -a \
+ -f "${ac_cv_c_tclh}/tclWinPort.h"; then
+ result="private headers found with public headers"
+ elif test "${TEA_PLATFORM}" = "unix" -a \
+ -f "${ac_cv_c_tclh}/tclUnixPort.h"; then
+ result="private headers found with public headers"
+ else
+ TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\"
+ if test "${TEA_PLATFORM}" = "windows"; then
+ TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\"
+ else
+ TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\"
+ fi
+ # Overwrite the previous TCL_INCLUDES as this should capture both
+ # public and private headers in the same set.
+ # We want to ensure these are substituted so as not to require
+ # any *_NATIVE vars be defined in the Makefile
+ TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
+ if test "`uname -s`" = "Darwin"; then
+ # If Tcl was built as a framework, attempt to use
+ # the framework's Headers and PrivateHeaders directories
+ case ${TCL_DEFS} in
+ *TCL_FRAMEWORK*)
+ if test -d "${TCL_BIN_DIR}/Headers" -a \
+ -d "${TCL_BIN_DIR}/PrivateHeaders"; then
+ TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"
+ else
+ TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
+ fi
+ ;;
+ esac
+ result="Using ${TCL_INCLUDES}"
+ else
+ if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then
+ AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}])
+ fi
+ result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}"
+ fi
+ fi
+
+ AC_SUBST(TCL_TOP_DIR_NATIVE)
+
+ AC_SUBST(TCL_INCLUDES)
+ AC_MSG_RESULT([${result}])
+])
+
+#------------------------------------------------------------------------
+# TEA_PUBLIC_TCL_HEADERS --
+#
+# Locate the installed public Tcl header files
+#
+# Arguments:
+# None.
+#
+# Requires:
+# CYGPATH must be set
+#
+# Results:
+#
+# Adds a --with-tclinclude switch to configure.
+# Result is cached.
+#
+# Substs the following vars:
+# TCL_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [
+ AC_MSG_CHECKING([for Tcl public headers])
+
+ AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval})
+
+ AC_CACHE_VAL(ac_cv_c_tclh, [
+ # Use the value from --with-tclinclude, if it was given
+
+ if test x"${with_tclinclude}" != x ; then
+ if test -f "${with_tclinclude}/tcl.h" ; then
+ ac_cv_c_tclh=${with_tclinclude}
+ else
+ AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
+ fi
+ else
+ list=""
+ if test "`uname -s`" = "Darwin"; then
+ # If Tcl was built as a framework, attempt to use
+ # the framework's Headers directory
+ case ${TCL_DEFS} in
+ *TCL_FRAMEWORK*)
+ list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`"
+ ;;
+ esac
+ fi
+
+ # Look in the source dir only if Tcl is not installed,
+ # and in that situation, look there before installed locations.
+ if test -f "${TCL_BIN_DIR}/Makefile" ; then
+ list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
+ fi
+
+ # Check order: pkg --prefix location, Tcl's --prefix location,
+ # relative to directory of tclConfig.sh.
+
+ eval "temp_includedir=${includedir}"
+ list="$list \
+ `ls -d ${temp_includedir} 2>/dev/null` \
+ `ls -d ${TCL_PREFIX}/include 2>/dev/null` \
+ `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
+ if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
+ list="$list /usr/local/include /usr/include"
+ if test x"${TCL_INCLUDE_SPEC}" != x ; then
+ d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'`
+ list="$list `ls -d ${d} 2>/dev/null`"
+ fi
+ fi
+ for i in $list ; do
+ if test -f "$i/tcl.h" ; then
+ ac_cv_c_tclh=$i
+ break
+ fi
+ done
+ fi
+ ])
+
+ # Print a message based on how we determined the include path
+
+ if test x"${ac_cv_c_tclh}" = x ; then
+ AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude])
+ else
+ AC_MSG_RESULT([${ac_cv_c_tclh}])
+ fi
+
+ # Convert to a native path and substitute into the output files.
+
+ INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
+
+ TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
+
+ AC_SUBST(TCL_INCLUDES)
+])
+
+#------------------------------------------------------------------------
+# TEA_PRIVATE_TK_HEADERS --
+#
+# Locate the private Tk include files
+#
+# Arguments:
+#
+# Requires:
+# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has
+# already been called.
+#
+# Results:
+#
+# Substs the following vars:
+# TK_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [
+ # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh}
+ AC_REQUIRE([TEA_PUBLIC_TK_HEADERS])
+ AC_MSG_CHECKING([for Tk private include files])
+
+ TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}`
+ TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\"
+
+ # Check to see if tk<Plat>Port.h isn't already with the public headers
+ # Don't look for tkInt.h because that resides with tk.h in the core
+ # sources, but the <plat>Port headers are in a different directory
+ if test "${TEA_PLATFORM}" = "windows" -a \
+ -f "${ac_cv_c_tkh}/tkWinPort.h"; then
+ result="private headers found with public headers"
+ elif test "${TEA_PLATFORM}" = "unix" -a \
+ -f "${ac_cv_c_tkh}/tkUnixPort.h"; then
+ result="private headers found with public headers"
+ else
+ TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\"
+ TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\"
+ if test "${TEA_PLATFORM}" = "windows"; then
+ TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\"
+ else
+ TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\"
+ fi
+ # Overwrite the previous TK_INCLUDES as this should capture both
+ # public and private headers in the same set.
+ # We want to ensure these are substituted so as not to require
+ # any *_NATIVE vars be defined in the Makefile
+ TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
+ # Detect and add ttk subdir
+ if test -d "${TK_SRC_DIR}/generic/ttk"; then
+ TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\""
+ fi
+ if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
+ TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\""
+ fi
+ if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
+ TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\""
+ fi
+ if test "`uname -s`" = "Darwin"; then
+ # If Tk was built as a framework, attempt to use
+ # the framework's Headers and PrivateHeaders directories
+ case ${TK_DEFS} in
+ *TK_FRAMEWORK*)
+ if test -d "${TK_BIN_DIR}/Headers" -a \
+ -d "${TK_BIN_DIR}/PrivateHeaders"; then
+ TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"
+ else
+ TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
+ fi
+ ;;
+ esac
+ result="Using ${TK_INCLUDES}"
+ else
+ if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then
+ AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}])
+ fi
+ result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}"
+ fi
+ fi
+
+ AC_SUBST(TK_TOP_DIR_NATIVE)
+ AC_SUBST(TK_XLIB_DIR_NATIVE)
+
+ AC_SUBST(TK_INCLUDES)
+ AC_MSG_RESULT([${result}])
+])
+
+#------------------------------------------------------------------------
+# TEA_PUBLIC_TK_HEADERS --
+#
+# Locate the installed public Tk header files
+#
+# Arguments:
+# None.
+#
+# Requires:
+# CYGPATH must be set
+#
+# Results:
+#
+# Adds a --with-tkinclude switch to configure.
+# Result is cached.
+#
+# Substs the following vars:
+# TK_INCLUDES
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [
+ AC_MSG_CHECKING([for Tk public headers])
+
+ AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval})
+
+ AC_CACHE_VAL(ac_cv_c_tkh, [
+ # Use the value from --with-tkinclude, if it was given
+
+ if test x"${with_tkinclude}" != x ; then
+ if test -f "${with_tkinclude}/tk.h" ; then
+ ac_cv_c_tkh=${with_tkinclude}
+ else
+ AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
+ fi
+ else
+ list=""
+ if test "`uname -s`" = "Darwin"; then
+ # If Tk was built as a framework, attempt to use
+ # the framework's Headers directory.
+ case ${TK_DEFS} in
+ *TK_FRAMEWORK*)
+ list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`"
+ ;;
+ esac
+ fi
+
+ # Look in the source dir only if Tk is not installed,
+ # and in that situation, look there before installed locations.
+ if test -f "${TK_BIN_DIR}/Makefile" ; then
+ list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
+ fi
+
+ # Check order: pkg --prefix location, Tk's --prefix location,
+ # relative to directory of tkConfig.sh, Tcl's --prefix location,
+ # relative to directory of tclConfig.sh.
+
+ eval "temp_includedir=${includedir}"
+ list="$list \
+ `ls -d ${temp_includedir} 2>/dev/null` \
+ `ls -d ${TK_PREFIX}/include 2>/dev/null` \
+ `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \
+ `ls -d ${TCL_PREFIX}/include 2>/dev/null` \
+ `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
+ if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
+ list="$list /usr/local/include /usr/include"
+ if test x"${TK_INCLUDE_SPEC}" != x ; then
+ d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'`
+ list="$list `ls -d ${d} 2>/dev/null`"
+ fi
+ fi
+ for i in $list ; do
+ if test -f "$i/tk.h" ; then
+ ac_cv_c_tkh=$i
+ break
+ fi
+ done
+ fi
+ ])
+
+ # Print a message based on how we determined the include path
+
+ if test x"${ac_cv_c_tkh}" = x ; then
+ AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude])
+ else
+ AC_MSG_RESULT([${ac_cv_c_tkh}])
+ fi
+
+ # Convert to a native path and substitute into the output files.
+
+ INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
+
+ TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
+
+ AC_SUBST(TK_INCLUDES)
+
+ if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
+ # On Windows and Aqua, we need the X compat headers
+ AC_MSG_CHECKING([for X11 header files])
+ if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
+ INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
+ TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
+ AC_SUBST(TK_XINCLUDES)
+ fi
+ AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PATH_CONFIG --
+#
+# Locate the ${1}Config.sh file and perform a sanity check on
+# the ${1} compile flags. These are used by packages like
+# [incr Tk] that load *Config.sh files from more than Tcl and Tk.
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --with-$1=...
+#
+# Defines the following vars:
+# $1_BIN_DIR Full path to the directory containing
+# the $1Config.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_CONFIG], [
+ #
+ # Ok, lets find the $1 configuration
+ # First, look for one uninstalled.
+ # the alternative search directory is invoked by --with-$1
+ #
+
+ if test x"${no_$1}" = x ; then
+ # we reset no_$1 in case something fails here
+ no_$1=true
+ AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
+ AC_MSG_CHECKING([for $1 configuration])
+ AC_CACHE_VAL(ac_cv_c_$1config,[
+
+ # First check to see if --with-$1 was specified.
+ if test x"${with_$1config}" != x ; then
+ case ${with_$1config} in
+ */$1Config.sh )
+ if test -f ${with_$1config}; then
+ AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself])
+ with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'`
+ fi;;
+ esac
+ if test -f "${with_$1config}/$1Config.sh" ; then
+ ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
+ else
+ AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
+ fi
+ fi
+
+ # then check for a private $1 installation
+ if test x"${ac_cv_c_$1config}" = x ; then
+ for i in \
+ ../$1 \
+ `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+ `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+ `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+ ../../$1 \
+ `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+ `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+ ../../../$1 \
+ `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+ `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+ ${srcdir}/../$1 \
+ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
+ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
+ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
+ ; do
+ if test -f "$i/$1Config.sh" ; then
+ ac_cv_c_$1config=`(cd $i; pwd)`
+ break
+ fi
+ if test -f "$i/unix/$1Config.sh" ; then
+ ac_cv_c_$1config=`(cd $i/unix; pwd)`
+ break
+ fi
+ done
+ fi
+
+ # check in a few common install locations
+ if test x"${ac_cv_c_$1config}" = x ; then
+ for i in `ls -d ${libdir} 2>/dev/null` \
+ `ls -d ${exec_prefix}/lib 2>/dev/null` \
+ `ls -d ${prefix}/lib 2>/dev/null` \
+ `ls -d /usr/local/lib 2>/dev/null` \
+ `ls -d /usr/contrib/lib 2>/dev/null` \
+ `ls -d /usr/lib 2>/dev/null` \
+ `ls -d /usr/lib64 2>/dev/null` \
+ ; do
+ if test -f "$i/$1Config.sh" ; then
+ ac_cv_c_$1config=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ ])
+
+ if test x"${ac_cv_c_$1config}" = x ; then
+ $1_BIN_DIR="# no $1 configs found"
+ AC_MSG_WARN([Cannot find $1 configuration definitions])
+ exit 0
+ else
+ no_$1=
+ $1_BIN_DIR=${ac_cv_c_$1config}
+ AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
+ fi
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_CONFIG --
+#
+# Load the $1Config.sh file
+#
+# Arguments:
+#
+# Requires the following vars to be set:
+# $1_BIN_DIR
+#
+# Results:
+#
+# Subst the following vars:
+# $1_SRC_DIR
+# $1_LIB_FILE
+# $1_LIB_SPEC
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_LOAD_CONFIG], [
+ AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])
+
+ if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
+ AC_MSG_RESULT([loading])
+ . "${$1_BIN_DIR}/$1Config.sh"
+ else
+ AC_MSG_RESULT([file not found])
+ fi
+
+ #
+ # If the $1_BIN_DIR is the build directory (not the install directory),
+ # then set the common variable name to the value of the build variables.
+ # For example, the variable $1_LIB_SPEC will be set to the value
+ # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
+ # instead of $1_BUILD_LIB_SPEC since it will work with both an
+ # installed and uninstalled version of Tcl.
+ #
+
+ if test -f "${$1_BIN_DIR}/Makefile" ; then
+ AC_MSG_WARN([Found Makefile - using build library specs for $1])
+ $1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
+ $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
+ $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
+ fi
+
+ AC_SUBST($1_VERSION)
+ AC_SUBST($1_BIN_DIR)
+ AC_SUBST($1_SRC_DIR)
+
+ AC_SUBST($1_LIB_FILE)
+ AC_SUBST($1_LIB_SPEC)
+
+ AC_SUBST($1_STUB_LIB_FILE)
+ AC_SUBST($1_STUB_LIB_SPEC)
+ AC_SUBST($1_STUB_LIB_PATH)
+
+ # Allow the caller to prevent this auto-check by specifying any 2nd arg
+ AS_IF([test "x$2" = x], [
+ # Check both upper and lower-case variants
+ # If a dev wanted non-stubs libs, this function could take an option
+ # to not use _STUB in the paths below
+ AS_IF([test "x${$1_STUB_LIB_SPEC}" = x],
+ [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)],
+ [TEA_LOAD_CONFIG_LIB($1_STUB)])
+ ])
+])
+
+#------------------------------------------------------------------------
+# TEA_LOAD_CONFIG_LIB --
+#
+# Helper function to load correct library from another extension's
+# ${PACKAGE}Config.sh.
+#
+# Results:
+# Adds to LIBS the appropriate extension library
+#
+#------------------------------------------------------------------------
+AC_DEFUN([TEA_LOAD_CONFIG_LIB], [
+ AC_MSG_CHECKING([For $1 library for LIBS])
+ # This simplifies the use of stub libraries by automatically adding
+ # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS,
+ # but this is called before CONFIG_CFLAGS. More importantly, this adds
+ # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD.
+ if test "x${$1_LIB_SPEC}" != "x" ; then
+ if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then
+ TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"])
+ AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}])
+ else
+ TEA_ADD_LIBS([${$1_LIB_SPEC}])
+ AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}])
+ fi
+ else
+ AC_MSG_RESULT([file not found])
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_EXPORT_CONFIG --
+#
+# Define the data to insert into the ${PACKAGE}Config.sh file
+#
+# Arguments:
+#
+# Requires the following vars to be set:
+# $1
+#
+# Results:
+# Subst the following vars:
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN(TEA_EXPORT_CONFIG, [
+ #--------------------------------------------------------------------
+ # These are for $1Config.sh
+ #--------------------------------------------------------------------
+
+ # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib)
+ eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}"
+ if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
+ eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}"
+ eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}"
+ else
+ eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
+ eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
+ fi
+ $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}"
+ $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}"
+ $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}"
+ $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}"
+ $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}"
+ $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}"
+
+ AC_SUBST($1_BUILD_LIB_SPEC)
+ AC_SUBST($1_LIB_SPEC)
+ AC_SUBST($1_BUILD_STUB_LIB_SPEC)
+ AC_SUBST($1_STUB_LIB_SPEC)
+ AC_SUBST($1_BUILD_STUB_LIB_PATH)
+ AC_SUBST($1_STUB_LIB_PATH)
+
+ AC_SUBST(MAJOR_VERSION)
+ AC_SUBST(MINOR_VERSION)
+ AC_SUBST(PATCHLEVEL)
+])
+
+
+#------------------------------------------------------------------------
+# TEA_PATH_CELIB --
+#
+# Locate Keuchel's celib emulation layer for targeting Win/CE
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --with-celib=...
+#
+# Defines the following vars:
+# CELIB_DIR Full path to the directory containing
+# the include and platform lib files
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_CELIB], [
+ # First, look for one uninstalled.
+ # the alternative search directory is invoked by --with-celib
+
+ if test x"${no_celib}" = x ; then
+ # we reset no_celib in case something fails here
+ no_celib=true
+ AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval})
+ AC_MSG_CHECKING([for Windows/CE celib directory])
+ AC_CACHE_VAL(ac_cv_c_celibconfig,[
+ # First check to see if --with-celibconfig was specified.
+ if test x"${with_celibconfig}" != x ; then
+ if test -d "${with_celibconfig}/inc" ; then
+ ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
+ else
+ AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
+ fi
+ fi
+
+ # then check for a celib library
+ if test x"${ac_cv_c_celibconfig}" = x ; then
+ for i in \
+ ../celib-palm-3.0 \
+ ../celib \
+ ../../celib-palm-3.0 \
+ ../../celib \
+ `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
+ ${srcdir}/../celib-palm-3.0 \
+ ${srcdir}/../celib \
+ `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
+ ; do
+ if test -d "$i/inc" ; then
+ ac_cv_c_celibconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ ])
+ if test x"${ac_cv_c_celibconfig}" = x ; then
+ AC_MSG_ERROR([Cannot find celib support library directory])
+ else
+ no_celib=
+ CELIB_DIR=${ac_cv_c_celibconfig}
+ CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'`
+ AC_MSG_RESULT([found $CELIB_DIR])
+ fi
+ fi
+])
+
+
+# Local Variables:
+# mode: autoconf
+# End:
--- /dev/null
+# makefile.vc -- -*- Makefile -*-
+#
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
+#
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
+#-------------------------------------------------------------------------
+
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
+MSG = ^
+You will need to run vcvars32.bat from Developer Studio, first, to setup^
+the environment. Jump to this line to read the new instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1) It is now necessary to have %MSVCDir% set in the environment. This is
+# used as a check to see if vcvars32.bat had been run prior to running
+# nmake or during the installation of Microsoft Visual C++, MSVCDir had
+# been set globally and the PATH adjusted. Either way is valid.
+#
+# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+# directory to setup the proper environment, if needed, for your current
+# setup. This is a needed bootstrap requirement and allows the swapping of
+# different environments to be easier.
+#
+# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
+# vcvars32.bat according to the instructions for it. This can also turn on
+# the 64-bit compiler, if your SDK has it.
+#
+# 3) Targets are:
+# all -- Builds everything.
+# <project> -- Builds the project (eg: nmake sample)
+# test -- Builds and runs the test suite.
+# install -- Installs the built binaries and libraries to $(INSTALLDIR)
+# in an appropriate subdirectory.
+# clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4) Macros usable on the commandline:
+# INSTALLDIR=<path>
+# Sets where to install Tcl from the built binaries.
+# C:\Progra~1\Tcl is assumed when not specified.
+#
+# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+# Sets special options for the core. The default is for none.
+# Any combination of the above may be used (comma separated).
+# 'none' will over-ride everything to nothing.
+#
+# static = Builds a static library of the core instead of a
+# dll. The shell will be static (and large), as well.
+# msvcrt = Effects the static option only to switch it from
+# using libcmt(d) as the C runtime [by default] to
+# msvcrt(d). This is useful for static embedding
+# support.
+# staticpkg = Effects the static option only to switch
+# tclshXX.exe to have the dde and reg extension linked
+# inside it.
+# threads = Turns on full multithreading support.
+# thrdalloc = Use the thread allocator (shared global free pool).
+# symbols = Adds symbols for step debugging.
+# profile = Adds profiling hooks. Map file is assumed.
+# loimpact = Adds a flag for how NT treats the heap to keep memory
+# in use, low. This is said to impact alloc performance.
+#
+# STATS=memdbg,compdbg,none
+# Sets optional memory and bytecode compiler debugging code added
+# to the core. The default is for none. Any combination of the
+# above may be used (comma separated). 'none' will over-ride
+# everything to nothing.
+#
+# memdbg = Enables the debugging memory allocator.
+# compdbg = Enables byte compilation logging.
+#
+# MACHINE=(IX86|IA64|ALPHA)
+# Set the machine type used for the compiler, linker, and
+# resource compiler. This hook is needed to tell the tools
+# when alternate platforms are requested. IX86 is the default
+# when not specified.
+#
+# TMP_DIR=<path>
+# OUT_DIR=<path>
+# Hooks to allow the intermediate and output directories to be
+# changed. $(OUT_DIR) is assumed to be
+# $(BINROOT)\(Release|Debug) based on if symbols are requested.
+# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+# TESTPAT=<file>
+# Reads the tests requested to be run from this file.
+#
+# CFG_ENCODING=encoding
+# name of encoding for configuration information. Defaults
+# to cp1252
+#
+# 5) Examples:
+#
+# Basic syntax of calling nmake looks like this:
+# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+# Standard (no frills)
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>nmake -f makefile.vc all
+# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+# Building for Win64
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+# Targeting Windows pre64 RETAIL
+# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = sqlite3
+!include "rules.vc"
+
+# nmakehelp -V <file> <tag> will search the file for tag, skips until a
+# number and returns all character until a character not in [0-9.ab]
+# is read.
+
+!if [echo REM = This file is generated from Makefile.vc > versions.vc]
+!endif
+# get project version from row "AC_INIT([sqlite], [3.7.14])"
+!if [echo DOTVERSION = \>> versions.vc] \
+ && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
+!endif
+!include "versions.vc"
+
+VERSION = $(DOTVERSION:.=)
+STUBPREFIX = $(PROJECT)stub
+
+DLLOBJS = \
+ $(TMP_DIR)\tclsqlite3.obj
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT = .
+ROOT = ..
+
+PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
+GENERICDIR = $(ROOT)\generic
+WINDIR = $(ROOT)\win
+LIBDIR = $(ROOT)\library
+DOCDIR = $(ROOT)\doc
+TOOLSDIR = $(ROOT)\tools
+COMPATDIR = $(ROOT)\compat
+
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
+
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug = -O2 -Op -Gs
+!else
+cdebug =
+!endif
+!else if "$(MACHINE)" == "IA64"
+### Warnings are too many, can't support warnings into errors.
+cdebug = -Z7 -Od -GZ
+!else
+cdebug = -Z7 -WX -Od -GZ
+!endif
+
+### Declarations common to all compiler options
+cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
+
+!if $(MSVCRT)
+!if $(DEBUG)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
+
+INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
+ -I"$(ROOT)\.."
+BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \
+ -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
+ -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
+CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
+TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \
+ -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
+ $(OPTDEFINES)
+
+#---------------------------------------------------------------------
+# Link flags
+#---------------------------------------------------------------------
+
+!if $(DEBUG)
+ldebug = -debug:full -debugtype:cv
+!else
+ldebug = -release -opt:ref -opt:icf,3
+!endif
+
+### Declarations common to all linker options
+lflags = -nologo -machine:$(MACHINE) $(ldebug)
+
+!if $(PROFILE)
+lflags = $(lflags) -profile
+!endif
+
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags = $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags = $(lflags) -align:4096
+!endif
+
+!if $(LOIMPACT)
+lflags = $(lflags) -ws:aggressive
+!endif
+
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+baselibs = $(TCLSTUBLIB)
+
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
+
+!IF "$(TESTPAT)" != ""
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+!ENDIF
+
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
+
+all: setup $(PROJECT)
+$(PROJECT): setup $(PRJLIB)
+install: install-binaries install-libraries install-docs
+
+# Tests need to ensure we load the right dll file we
+# have to handle the output differently on Win9x.
+#
+!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
+test: setup $(PROJECT)
+ set TCL_LIBRARY=$(ROOT)/library
+ $(TCLSH) <<
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+!else
+test: setup $(PROJECT)
+ echo Please wait while the test results are collected
+ set TCL_LIBRARY=$(ROOT)/library
+ $(TCLSH) << >tests.log
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+ type tests.log | more
+!endif
+
+setup:
+ @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+ @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+$(PRJLIB): $(DLLOBJS)
+ $(link32) $(dlllflags) -out:$@ $(baselibs) @<<
+$**
+<<
+ -@del $*.exp
+
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+ $(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+ $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+!if $(DEBUG)
+ -d DEBUG \
+!endif
+!if $(TCL_THREADS)
+ -d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+ -d STATIC_BUILD \
+!endif
+ $<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
+
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+ @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
+ @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
+ @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
+
+install-libraries:
+ @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
+ @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
+ @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
+ @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
+package ifneeded $(PROJECT) $(DOTVERSION) \
+ [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
+<<
+
+install-docs:
+ @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
+ @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
+
+clean:
+ @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+ @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
+
+realclean: clean
+ @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+ @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+ @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
--- /dev/null
+/*
+ * ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ * This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2006 by Pat Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ * ----------------------------------------------------------------------------
+ */
+
+#define _CRT_SECURE_NO_DEPRECATE
+#include <windows.h>
+#define NO_SHLWAPI_GDI
+#define NO_SHLWAPI_STREAM
+#define NO_SHLWAPI_REG
+#include <shlwapi.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+#pragma comment (lib, "shlwapi.lib")
+#include <stdio.h>
+#include <math.h>
+
+/*
+ * This library is required for x64 builds with _some_ versions of MSVC
+ */
+#if defined(_M_IA64) || defined(_M_AMD64)
+#if _MSC_VER >= 1400 && _MSC_VER < 1500
+#pragma comment(lib, "bufferoverflowU")
+#endif
+#endif
+
+/* ISO hack for dumb VC++ */
+#ifdef _MSC_VER
+#define snprintf _snprintf
+#endif
+
+
+
+/* protos */
+
+static int CheckForCompilerFeature(const char *option);
+static int CheckForLinkerFeature(const char *option);
+static int IsIn(const char *string, const char *substring);
+static int SubstituteFile(const char *substs, const char *filename);
+static int QualifyPath(const char *path);
+static const char *GetVersionFromFile(const char *filename, const char *match);
+static DWORD WINAPI ReadFromPipe(LPVOID args);
+
+/* globals */
+
+#define CHUNK 25
+#define STATICBUFFERSIZE 1000
+typedef struct {
+ HANDLE pipe;
+ char buffer[STATICBUFFERSIZE];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+\f
+/*
+ * exitcodes: 0 == no, 1 == yes, 2 == error
+ */
+
+int
+main(
+ int argc,
+ char *argv[])
+{
+ char msg[300];
+ DWORD dwWritten;
+ int chars;
+
+ /*
+ * Make sure children (cl.exe and link.exe) are kept quiet.
+ */
+
+ SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+ /*
+ * Make sure the compiler and linker aren't effected by the outside world.
+ */
+
+ SetEnvironmentVariable("CL", "");
+ SetEnvironmentVariable("LINK", "");
+
+ if (argc > 1 && *argv[1] == '-') {
+ switch (*(argv[1]+1)) {
+ case 'c':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -c <compiler option>\n"
+ "Tests for whether cl.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForCompilerFeature(argv[2]);
+ case 'l':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -l <linker option>\n"
+ "Tests for whether link.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForLinkerFeature(argv[2]);
+ case 'f':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -f <string> <substring>\n"
+ "Find a substring within another\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ } else if (argc == 3) {
+ /*
+ * If the string is blank, there is no match.
+ */
+
+ return 0;
+ } else {
+ return IsIn(argv[2], argv[3]);
+ }
+ case 's':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -s <substitutions file> <file>\n"
+ "Perform a set of string map type substutitions on a file\n"
+ "exitcodes: 0\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return SubstituteFile(argv[2], argv[3]);
+ case 'V':
+ if (argc != 4) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -V filename matchstring\n"
+ "Extract a version from a file:\n"
+ "eg: pkgIndex.tcl \"package ifneeded http\"",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 0;
+ }
+ printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
+ return 0;
+ case 'Q':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -Q path\n"
+ "Emit the fully qualified path\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return QualifyPath(argv[2]);
+ }
+ }
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -c|-f|-l|-Q|-s|-V ...\n"
+ "This is a little helper app to equalize shell differences between WinNT and\n"
+ "Win9x and get nmake.exe to accomplish its job.\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+}
+\f
+static int
+CheckForCompilerFeature(
+ const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
+
+ ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+ sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+ sa.lpSecurityDescriptor = NULL;
+ sa.bInheritHandle = FALSE;
+
+ /*
+ * Create a non-inheritible pipe.
+ */
+
+ CreatePipe(&Out.pipe, &h, &sa, 0);
+
+ /*
+ * Dupe the write side, make it inheritible, and close the original.
+ */
+
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Same as above, but for the error side.
+ */
+
+ CreatePipe(&Err.pipe, &h, &sa, 0);
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Base command line.
+ */
+
+ lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
+
+ /*
+ * Append our option for testing
+ */
+
+ lstrcat(cmdline, option);
+
+ /*
+ * Filename to compile, which exists, but is nothing and empty.
+ */
+
+ lstrcat(cmdline, " .\\nul");
+
+ ok = CreateProcess(
+ NULL, /* Module name. */
+ cmdline, /* Command line. */
+ NULL, /* Process handle not inheritable. */
+ NULL, /* Thread handle not inheritable. */
+ TRUE, /* yes, inherit handles. */
+ DETACHED_PROCESS, /* No console for you. */
+ NULL, /* Use parent's environment block. */
+ NULL, /* Use parent's starting directory. */
+ &si, /* Pointer to STARTUPINFO structure. */
+ &pi); /* Pointer to PROCESS_INFORMATION structure. */
+
+ if (!ok) {
+ DWORD err = GetLastError();
+ int chars = snprintf(msg, sizeof(msg) - 1,
+ "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+ FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+ FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+ (300-chars), 0);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
+ return 2;
+ }
+
+ /*
+ * Close our references to the write handles that have now been inherited.
+ */
+
+ CloseHandle(si.hStdOutput);
+ CloseHandle(si.hStdError);
+
+ WaitForInputIdle(pi.hProcess, 5000);
+ CloseHandle(pi.hThread);
+
+ /*
+ * Start the pipe reader threads.
+ */
+
+ pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+ pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+ /*
+ * Block waiting for the process to end.
+ */
+
+ WaitForSingleObject(pi.hProcess, INFINITE);
+ CloseHandle(pi.hProcess);
+
+ /*
+ * Wait for our pipe to get done reading, should it be a little slow.
+ */
+
+ WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+ CloseHandle(pipeThreads[0]);
+ CloseHandle(pipeThreads[1]);
+
+ /*
+ * Look for the commandline warning code in both streams.
+ * - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
+ */
+
+ return !(strstr(Out.buffer, "D4002") != NULL
+ || strstr(Err.buffer, "D4002") != NULL
+ || strstr(Out.buffer, "D9002") != NULL
+ || strstr(Err.buffer, "D9002") != NULL
+ || strstr(Out.buffer, "D2021") != NULL
+ || strstr(Err.buffer, "D2021") != NULL);
+}
+\f
+static int
+CheckForLinkerFeature(
+ const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
+
+ ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+ sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+ sa.lpSecurityDescriptor = NULL;
+ sa.bInheritHandle = TRUE;
+
+ /*
+ * Create a non-inheritible pipe.
+ */
+
+ CreatePipe(&Out.pipe, &h, &sa, 0);
+
+ /*
+ * Dupe the write side, make it inheritible, and close the original.
+ */
+
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Same as above, but for the error side.
+ */
+
+ CreatePipe(&Err.pipe, &h, &sa, 0);
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Base command line.
+ */
+
+ lstrcpy(cmdline, "link.exe -nologo ");
+
+ /*
+ * Append our option for testing.
+ */
+
+ lstrcat(cmdline, option);
+
+ ok = CreateProcess(
+ NULL, /* Module name. */
+ cmdline, /* Command line. */
+ NULL, /* Process handle not inheritable. */
+ NULL, /* Thread handle not inheritable. */
+ TRUE, /* yes, inherit handles. */
+ DETACHED_PROCESS, /* No console for you. */
+ NULL, /* Use parent's environment block. */
+ NULL, /* Use parent's starting directory. */
+ &si, /* Pointer to STARTUPINFO structure. */
+ &pi); /* Pointer to PROCESS_INFORMATION structure. */
+
+ if (!ok) {
+ DWORD err = GetLastError();
+ int chars = snprintf(msg, sizeof(msg) - 1,
+ "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+ FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+ FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+ (300-chars), 0);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
+ return 2;
+ }
+
+ /*
+ * Close our references to the write handles that have now been inherited.
+ */
+
+ CloseHandle(si.hStdOutput);
+ CloseHandle(si.hStdError);
+
+ WaitForInputIdle(pi.hProcess, 5000);
+ CloseHandle(pi.hThread);
+
+ /*
+ * Start the pipe reader threads.
+ */
+
+ pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+ pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+ /*
+ * Block waiting for the process to end.
+ */
+
+ WaitForSingleObject(pi.hProcess, INFINITE);
+ CloseHandle(pi.hProcess);
+
+ /*
+ * Wait for our pipe to get done reading, should it be a little slow.
+ */
+
+ WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+ CloseHandle(pipeThreads[0]);
+ CloseHandle(pipeThreads[1]);
+
+ /*
+ * Look for the commandline warning code in the stderr stream.
+ */
+
+ return !(strstr(Out.buffer, "LNK1117") != NULL ||
+ strstr(Err.buffer, "LNK1117") != NULL ||
+ strstr(Out.buffer, "LNK4044") != NULL ||
+ strstr(Err.buffer, "LNK4044") != NULL);
+}
+\f
+static DWORD WINAPI
+ReadFromPipe(
+ LPVOID args)
+{
+ pipeinfo *pi = (pipeinfo *) args;
+ char *lastBuf = pi->buffer;
+ DWORD dwRead;
+ BOOL ok;
+
+ again:
+ if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
+ CloseHandle(pi->pipe);
+ return (DWORD)-1;
+ }
+ ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
+ if (!ok || dwRead == 0) {
+ CloseHandle(pi->pipe);
+ return 0;
+ }
+ lastBuf += dwRead;
+ goto again;
+
+ return 0; /* makes the compiler happy */
+}
+\f
+static int
+IsIn(
+ const char *string,
+ const char *substring)
+{
+ return (strstr(string, substring) != NULL);
+}
+\f
+/*
+ * GetVersionFromFile --
+ * Looks for a match string in a file and then returns the version
+ * following the match where a version is anything acceptable to
+ * package provide or package ifneeded.
+ */
+
+static const char *
+GetVersionFromFile(
+ const char *filename,
+ const char *match)
+{
+ size_t cbBuffer = 100;
+ static char szBuffer[100];
+ char *szResult = NULL;
+ FILE *fp = fopen(filename, "rt");
+
+ if (fp != NULL) {
+ /*
+ * Read data until we see our match string.
+ */
+
+ while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+ LPSTR p, q;
+
+ p = strstr(szBuffer, match);
+ if (p != NULL) {
+ /*
+ * Skip to first digit.
+ */
+
+ while (*p && !isdigit(*p)) {
+ ++p;
+ }
+
+ /*
+ * Find ending whitespace.
+ */
+
+ q = p;
+ while (*q && (isalnum(*q) || *q == '.')) {
+ ++q;
+ }
+
+ memcpy(szBuffer, p, q - p);
+ szBuffer[q-p] = 0;
+ szResult = szBuffer;
+ break;
+ }
+ }
+ fclose(fp);
+ }
+ return szResult;
+}
+\f
+/*
+ * List helpers for the SubstituteFile function
+ */
+
+typedef struct list_item_t {
+ struct list_item_t *nextPtr;
+ char * key;
+ char * value;
+} list_item_t;
+
+/* insert a list item into the list (list may be null) */
+static list_item_t *
+list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
+{
+ list_item_t *itemPtr = malloc(sizeof(list_item_t));
+ if (itemPtr) {
+ itemPtr->key = strdup(key);
+ itemPtr->value = strdup(value);
+ itemPtr->nextPtr = NULL;
+
+ while(*listPtrPtr) {
+ listPtrPtr = &(*listPtrPtr)->nextPtr;
+ }
+ *listPtrPtr = itemPtr;
+ }
+ return itemPtr;
+}
+
+static void
+list_free(list_item_t **listPtrPtr)
+{
+ list_item_t *tmpPtr, *listPtr = *listPtrPtr;
+ while (listPtr) {
+ tmpPtr = listPtr;
+ listPtr = listPtr->nextPtr;
+ free(tmpPtr->key);
+ free(tmpPtr->value);
+ free(tmpPtr);
+ }
+}
+\f
+/*
+ * SubstituteFile --
+ * As windows doesn't provide anything useful like sed and it's unreliable
+ * to use the tclsh you are building against (consider x-platform builds -
+ * eg compiling AMD64 target from IX86) we provide a simple substitution
+ * option here to handle autoconf style substitutions.
+ * The substitution file is whitespace and line delimited. The file should
+ * consist of lines matching the regular expression:
+ * \s*\S+\s+\S*$
+ *
+ * Usage is something like:
+ * nmakehlp -S << $** > $@
+ * @PACKAGE_NAME@ $(PACKAGE_NAME)
+ * @PACKAGE_VERSION@ $(PACKAGE_VERSION)
+ * <<
+ */
+
+static int
+SubstituteFile(
+ const char *substitutions,
+ const char *filename)
+{
+ size_t cbBuffer = 1024;
+ static char szBuffer[1024], szCopy[1024];
+ char *szResult = NULL;
+ list_item_t *substPtr = NULL;
+ FILE *fp, *sp;
+
+ fp = fopen(filename, "rt");
+ if (fp != NULL) {
+
+ /*
+ * Build a list of substutitions from the first filename
+ */
+
+ sp = fopen(substitutions, "rt");
+ if (sp != NULL) {
+ while (fgets(szBuffer, cbBuffer, sp) != NULL) {
+ char *ks, *ke, *vs, *ve;
+ ks = szBuffer;
+ while (ks && *ks && isspace(*ks)) ++ks;
+ ke = ks;
+ while (ke && *ke && !isspace(*ke)) ++ke;
+ vs = ke;
+ while (vs && *vs && isspace(*vs)) ++vs;
+ ve = vs;
+ while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
+ *ke = 0, *ve = 0;
+ list_insert(&substPtr, ks, vs);
+ }
+ fclose(sp);
+ }
+
+ /* debug: dump the list */
+#ifdef _DEBUG
+ {
+ int n = 0;
+ list_item_t *p = NULL;
+ for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
+ fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
+ }
+ }
+#endif
+
+ /*
+ * Run the substitutions over each line of the input
+ */
+
+ while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+ list_item_t *p = NULL;
+ for (p = substPtr; p != NULL; p = p->nextPtr) {
+ char *m = strstr(szBuffer, p->key);
+ if (m) {
+ char *cp, *op, *sp;
+ cp = szCopy;
+ op = szBuffer;
+ while (op != m) *cp++ = *op++;
+ sp = p->value;
+ while (sp && *sp) *cp++ = *sp++;
+ op += strlen(p->key);
+ while (*op) *cp++ = *op++;
+ *cp = 0;
+ memcpy(szBuffer, szCopy, sizeof(szCopy));
+ }
+ }
+ printf(szBuffer);
+ }
+
+ list_free(&substPtr);
+ }
+ fclose(fp);
+ return 0;
+}
+\f
+/*
+ * QualifyPath --
+ *
+ * This composes the current working directory with a provided path
+ * and returns the fully qualified and normalized path.
+ * Mostly needed to setup paths for testing.
+ */
+
+static int
+QualifyPath(
+ const char *szPath)
+{
+ char szCwd[MAX_PATH + 1];
+ char szTmp[MAX_PATH + 1];
+ char *p;
+ GetCurrentDirectory(MAX_PATH, szCwd);
+ while ((p = strchr(szPath, '/')) && *p)
+ *p = '\\';
+ PathCombine(szTmp, szCwd, szPath);
+ PathCanonicalize(szCwd, szTmp);
+ printf("%s\n", szCwd);
+ return 0;
+}
+
+/*
+ * Local variables:
+ * mode: c
+ * c-basic-offset: 4
+ * fill-column: 78
+ * indent-tabs-mode: t
+ * tab-width: 8
+ * End:
+ */
--- /dev/null
+#------------------------------------------------------------------------------
+# rules.vc --
+#
+# Microsoft Visual C++ makefile include for decoding the commandline
+# macros. This file does not need editing to build Tcl.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 2001-2003 David Gravereaux.
+# Copyright (c) 2003-2008 Patrick Thoyts
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32 = $(CC) # built-in default.
+link32 = link
+lib32 = lib
+rc32 = $(RC) # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR = C:\Program Files\Tcl
+!else
+### Fix the path separators.
+_INSTALLDIR = $(INSTALLDIR:/=\)
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR = rmdir /S /Q
+ERRNULL = 2>NUL
+!if ![ver | find "4.0" > nul]
+CPY = echo y | xcopy /i >NUL
+COPY = copy >NUL
+!else
+CPY = xcopy /i /y >NUL
+COPY = copy /y >NUL
+!endif
+!else # "$(OS)" != "Windows_NT"
+CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
+COPY = copy >_JUNK.OUT # On Win98 NUL does not work here.
+RMDIR = deltree /Y
+NULL = \NUL # Used in testing directory existence
+ERRNULL = >NUL # Win9x shell cannot redirect stderr
+!endif
+MKDIR = mkdir
+
+#------------------------------------------------------------------------------
+# Determine the host and target architectures and compiler version.
+#------------------------------------------------------------------------------
+
+_HASH=^#
+_VC_MANIFEST_EMBED_EXE=
+_VC_MANIFEST_EMBED_DLL=
+VCVER=0
+!if ![echo VCVERSION=_MSC_VER > vercl.x] \
+ && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
+ && ![echo ARCH=IX86 >> vercl.x] \
+ && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
+ && ![echo ARCH=AMD64 >> vercl.x] \
+ && ![echo $(_HASH)endif >> vercl.x] \
+ && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
+!include vercl.i
+!if ![echo VCVER= ^\> vercl.vc] \
+ && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
+!include vercl.vc
+!endif
+!endif
+!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
+!endif
+
+!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
+NATIVE_ARCH=IX86
+!else
+NATIVE_ARCH=AMD64
+!endif
+
+# Since MSVC8 we must deal with manifest resources.
+!if $(VCVERSION) >= 1400
+_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
+_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
+!endif
+
+!ifndef MACHINE
+MACHINE=$(ARCH)
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING = \"cp1252\"
+!endif
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Ot]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING = 1
+!else
+!message *** Compiler does not have 'Optimizations'
+OPTIMIZING = 0
+!endif
+
+OPTIMIZATIONS =
+
+!if [nmakehlp -c -Ot]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot
+!endif
+
+!if [nmakehlp -c -Oi]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi
+!endif
+
+!if [nmakehlp -c -Op]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Op
+!endif
+
+!if [nmakehlp -c -fp:strict]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict
+!endif
+
+!if [nmakehlp -c -Gs]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs
+!endif
+
+!if [nmakehlp -c -GS]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -GS
+!endif
+
+!if [nmakehlp -c -GL]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -GL
+!endif
+
+DEBUGFLAGS =
+
+!if [nmakehlp -c -RTC1]
+DEBUGFLAGS = $(DEBUGFLAGS) -RTC1
+!elseif [nmakehlp -c -GZ]
+DEBUGFLAGS = $(DEBUGFLAGS) -GZ
+!endif
+
+COMPILERFLAGS =-W3 -DUNICODE -D_UNICODE
+
+# In v13 -GL and -YX are incompatible.
+!if [nmakehlp -c -YX]
+!if ![nmakehlp -c -GL]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -YX
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+COMPILERFLAGS = $(COMPILERFLAGS) -QI0f
+!else
+!message *** Compiler does not have 'Pentium 0x0f fix'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx
+!else
+!message *** Compiler does not have 'B-stepping errata workarounds'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK = 1
+!else
+!message *** Linker does not have 'Win98 alignment problem'
+ALIGN98_HACK = 0
+!endif
+!else
+ALIGN98_HACK = 0
+!endif
+
+LINKERFLAGS =
+
+!if [nmakehlp -l -ltcg]
+LINKERFLAGS =-ltcg
+!endif
+
+#----------------------------------------------------------
+# Decode the options requested.
+#----------------------------------------------------------
+
+!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
+STATIC_BUILD = 0
+TCL_THREADS = 1
+DEBUG = 0
+SYMBOLS = 0
+PROFILE = 0
+PGO = 0
+MSVCRT = 0
+LOIMPACT = 0
+TCL_USE_STATIC_PACKAGES = 0
+USE_THREAD_ALLOC = 1
+UNCHECKED = 0
+!else
+!if [nmakehlp -f $(OPTS) "static"]
+!message *** Doing static
+STATIC_BUILD = 1
+!else
+STATIC_BUILD = 0
+!endif
+!if [nmakehlp -f $(OPTS) "msvcrt"]
+!message *** Doing msvcrt
+MSVCRT = 1
+!else
+MSVCRT = 0
+!endif
+!if [nmakehlp -f $(OPTS) "staticpkg"]
+!message *** Doing staticpkg
+TCL_USE_STATIC_PACKAGES = 1
+!else
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+!if [nmakehlp -f $(OPTS) "nothreads"]
+!message *** Compile explicitly for non-threaded tcl
+TCL_THREADS = 0
+!else
+TCL_THREADS = 1
+USE_THREAD_ALLOC= 1
+!endif
+!if [nmakehlp -f $(OPTS) "symbols"]
+!message *** Doing symbols
+DEBUG = 1
+!else
+DEBUG = 0
+!endif
+!if [nmakehlp -f $(OPTS) "pdbs"]
+!message *** Doing pdbs
+SYMBOLS = 1
+!else
+SYMBOLS = 0
+!endif
+!if [nmakehlp -f $(OPTS) "profile"]
+!message *** Doing profile
+PROFILE = 1
+!else
+PROFILE = 0
+!endif
+!if [nmakehlp -f $(OPTS) "pgi"]
+!message *** Doing profile guided optimization instrumentation
+PGO = 1
+!elseif [nmakehlp -f $(OPTS) "pgo"]
+!message *** Doing profile guided optimization
+PGO = 2
+!else
+PGO = 0
+!endif
+!if [nmakehlp -f $(OPTS) "loimpact"]
+!message *** Doing loimpact
+LOIMPACT = 1
+!else
+LOIMPACT = 0
+!endif
+!if [nmakehlp -f $(OPTS) "thrdalloc"]
+!message *** Doing thrdalloc
+USE_THREAD_ALLOC = 1
+!endif
+!if [nmakehlp -f $(OPTS) "tclalloc"]
+!message *** Doing tclalloc
+USE_THREAD_ALLOC = 0
+!endif
+!if [nmakehlp -f $(OPTS) "unchecked"]
+!message *** Doing unchecked
+UNCHECKED = 1
+!else
+UNCHECKED = 0
+!endif
+!endif
+
+
+!if !$(STATIC_BUILD)
+# Make sure we don't build overly fat DLLs.
+MSVCRT = 1
+# We shouldn't statically put the extensions inside the shell when dynamic.
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+
+
+#----------------------------------------------------------
+# Figure-out how to name our intermediate and output directories.
+# We wouldn't want different builds to use the same .obj files
+# by accident.
+#----------------------------------------------------------
+
+#----------------------------------------
+# Naming convention:
+# t = full thread support.
+# s = static library (as opposed to an
+# import library)
+# g = linked to the debug enabled C
+# run-time.
+# x = special static build when it
+# links to the dynamic C run-time.
+#----------------------------------------
+SUFX = tsgx
+
+!if $(DEBUG)
+BUILDDIRTOP = Debug
+!else
+BUILDDIRTOP = Release
+!endif
+
+!if "$(MACHINE)" != "IX86"
+BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
+!endif
+!if $(VCVER) > 6
+BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
+!endif
+
+!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
+SUFX = $(SUFX:g=)
+!endif
+
+TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
+
+!if !$(STATIC_BUILD)
+TMP_DIRFULL = $(TMP_DIRFULL:Static=)
+SUFX = $(SUFX:s=)
+EXT = dll
+!if $(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX = $(SUFX:x=)
+!endif
+!else
+TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
+EXT = lib
+!if !$(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX = $(SUFX:x=)
+!endif
+!endif
+
+!if !$(TCL_THREADS)
+TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
+SUFX = $(SUFX:t=)
+!endif
+
+!ifndef TMP_DIR
+TMP_DIR = $(TMP_DIRFULL)
+!ifndef OUT_DIR
+OUT_DIR = .\$(BUILDDIRTOP)
+!endif
+!else
+!ifndef OUT_DIR
+OUT_DIR = $(TMP_DIR)
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the statistics requested.
+#----------------------------------------------------------
+
+!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
+TCL_MEM_DEBUG = 0
+TCL_COMPILE_DEBUG = 0
+!else
+!if [nmakehlp -f $(STATS) "memdbg"]
+!message *** Doing memdbg
+TCL_MEM_DEBUG = 1
+!else
+TCL_MEM_DEBUG = 0
+!endif
+!if [nmakehlp -f $(STATS) "compdbg"]
+!message *** Doing compdbg
+TCL_COMPILE_DEBUG = 1
+!else
+TCL_COMPILE_DEBUG = 0
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the checks requested.
+#----------------------------------------------------------
+
+!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
+TCL_NO_DEPRECATED = 0
+WARNINGS = -W3
+!else
+!if [nmakehlp -f $(CHECKS) "nodep"]
+!message *** Doing nodep check
+TCL_NO_DEPRECATED = 1
+!else
+TCL_NO_DEPRECATED = 0
+!endif
+!if [nmakehlp -f $(CHECKS) "fullwarn"]
+!message *** Doing full warnings check
+WARNINGS = -W4
+!if [nmakehlp -l -warn:3]
+LINKERFLAGS = $(LINKERFLAGS) -warn:3
+!endif
+!else
+WARNINGS = -W3
+!endif
+!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
+!message *** Doing 64bit portability warnings
+WARNINGS = $(WARNINGS) -Wp64
+!endif
+!endif
+
+!if $(PGO) > 1
+!if [nmakehlp -l -ltcg:pgoptimize]
+LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
+!else
+MSG=^
+This compiler does not support profile guided optimization.
+!error $(MSG)
+!endif
+!elseif $(PGO) > 0
+!if [nmakehlp -l -ltcg:pginstrument]
+LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
+!else
+MSG=^
+This compiler does not support profile guided optimization.
+!error $(MSG)
+!endif
+!endif
+
+#----------------------------------------------------------
+# Set our defines now armed with our options.
+#----------------------------------------------------------
+
+OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
+
+!if $(TCL_MEM_DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG
+!endif
+!if $(TCL_COMPILE_DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+!endif
+!if $(TCL_THREADS)
+OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1
+!if $(USE_THREAD_ALLOC)
+OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
+!endif
+!endif
+!if $(STATIC_BUILD)
+OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD
+!endif
+!if $(TCL_NO_DEPRECATED)
+OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED
+!endif
+
+!if !$(DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DNDEBUG
+!if $(OPTIMIZING)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
+!endif
+!endif
+!if $(PROFILE)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED
+!endif
+!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT
+!endif
+!if $(VCVERSION) < 1300
+OPTDEFINES = $(OPTDEFINES) -DNO_STRTOI64
+!endif
+
+#----------------------------------------------------------
+# Locate the Tcl headers to build against
+#----------------------------------------------------------
+
+!if "$(PROJECT)" == "tcl"
+
+_TCL_H = ..\generic\tcl.h
+
+!else
+
+# If INSTALLDIR set to tcl root dir then reset to the lib dir.
+!if exist("$(_INSTALLDIR)\include\tcl.h")
+_INSTALLDIR=$(_INSTALLDIR)\lib
+!endif
+
+!if !defined(TCLDIR)
+!if exist("$(_INSTALLDIR)\..\include\tcl.h")
+TCLINSTALL = 1
+_TCLDIR = $(_INSTALLDIR)\..
+_TCL_H = $(_INSTALLDIR)\..\include\tcl.h
+TCLDIR = $(_INSTALLDIR)\..
+!else
+MSG=^
+Failed to find tcl.h. Set the TCLDIR macro.
+!error $(MSG)
+!endif
+!else
+_TCLDIR = $(TCLDIR:/=\)
+!if exist("$(_TCLDIR)\include\tcl.h")
+TCLINSTALL = 1
+_TCL_H = $(_TCLDIR)\include\tcl.h
+!elseif exist("$(_TCLDIR)\generic\tcl.h")
+TCLINSTALL = 0
+_TCL_H = $(_TCLDIR)\generic\tcl.h
+!else
+MSG =^
+Failed to find tcl.h. The TCLDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+!endif
+
+#--------------------------------------------------------------
+# Extract various version numbers from tcl headers
+# The generated file is then included in the makefile.
+#--------------------------------------------------------------
+
+!if [echo REM = This file is generated from rules.vc > versions.vc]
+!endif
+!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \
+ && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc]
+!endif
+!if [echo TCL_MINOR_VERSION = \>> versions.vc] \
+ && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc]
+!endif
+!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \
+ && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc]
+!endif
+
+# If building the tcl core then we need additional package versions
+!if "$(PROJECT)" == "tcl"
+!if [echo PKG_HTTP_VER = \>> versions.vc] \
+ && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc]
+!endif
+!if [echo PKG_TCLTEST_VER = \>> versions.vc] \
+ && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc]
+!endif
+!if [echo PKG_MSGCAT_VER = \>> versions.vc] \
+ && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc]
+!endif
+!if [echo PKG_PLATFORM_VER = \>> versions.vc] \
+ && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc]
+!endif
+!if [echo PKG_SHELL_VER = \>> versions.vc] \
+ && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc]
+!endif
+!if [echo PKG_DDE_VER = \>> versions.vc] \
+ && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc]
+!endif
+!if [echo PKG_REG_VER =\>> versions.vc] \
+ && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc]
+!endif
+!endif
+
+!include versions.vc
+
+#--------------------------------------------------------------
+# Setup tcl version dependent stuff headers
+#--------------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl"
+
+TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
+
+!if $(TCL_VERSION) < 81
+TCL_DOES_STUBS = 0
+!else
+TCL_DOES_STUBS = 1
+!endif
+
+!if $(TCLINSTALL)
+TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY = $(_TCLDIR)\lib
+TCLREGLIB = "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib"
+TCLDDELIB = "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib"
+COFFBASE = \must\have\tcl\sources\to\build\this\target
+TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target
+TCL_INCLUDES = -I"$(_TCLDIR)\include"
+!else
+TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY = $(_TCLDIR)\library
+TCLREGLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib"
+TCLDDELIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib"
+COFFBASE = "$(_TCLDIR)\win\coffbase.txt"
+TCLTOOLSDIR = $(_TCLDIR)\tools
+TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
+!endif
+
+!endif
+
+#-------------------------------------------------------------------------
+# Locate the Tk headers to build against
+#-------------------------------------------------------------------------
+
+!if "$(PROJECT)" == "tk"
+_TK_H = ..\generic\tk.h
+_INSTALLDIR = $(_INSTALLDIR)\..
+!endif
+
+!ifdef PROJECT_REQUIRES_TK
+!if !defined(TKDIR)
+!if exist("$(_INSTALLDIR)\..\include\tk.h")
+TKINSTALL = 1
+_TKDIR = $(_INSTALLDIR)\..
+_TK_H = $(_TKDIR)\include\tk.h
+TKDIR = $(_TKDIR)
+!elseif exist("$(_TCLDIR)\include\tk.h")
+TKINSTALL = 1
+_TKDIR = $(_TCLDIR)
+_TK_H = $(_TKDIR)\include\tk.h
+TKDIR = $(_TKDIR)
+!endif
+!else
+_TKDIR = $(TKDIR:/=\)
+!if exist("$(_TKDIR)\include\tk.h")
+TKINSTALL = 1
+_TK_H = $(_TKDIR)\include\tk.h
+!elseif exist("$(_TKDIR)\generic\tk.h")
+TKINSTALL = 0
+_TK_H = $(_TKDIR)\generic\tk.h
+!else
+MSG =^
+Failed to find tk.h. The TKDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+!endif
+
+#-------------------------------------------------------------------------
+# Extract Tk version numbers
+#-------------------------------------------------------------------------
+
+!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk"
+
+!if [echo TK_MAJOR_VERSION = \>> versions.vc] \
+ && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc]
+!endif
+!if [echo TK_MINOR_VERSION = \>> versions.vc] \
+ && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc]
+!endif
+!if [echo TK_PATCH_LEVEL = \>> versions.vc] \
+ && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc]
+!endif
+
+!include versions.vc
+
+TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
+TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION)
+
+!if "$(PROJECT)" != "tk"
+!if $(TKINSTALL)
+WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
+TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
+TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
+TK_INCLUDES = -I"$(_TKDIR)\include"
+!else
+WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
+TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
+TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
+TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
+!endif
+!endif
+
+!endif
+
+#----------------------------------------------------------
+# Display stats being used.
+#----------------------------------------------------------
+
+!message *** Intermediate directory will be '$(TMP_DIR)'
+!message *** Output directory will be '$(OUT_DIR)'
+!message *** Suffix for binaries will be '$(SUFX)'
+!message *** Optional defines are '$(OPTDEFINES)'
+!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
+!message *** Host architecture is $(NATIVE_ARCH)
+!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
+!message *** Link options '$(LINKERFLAGS)'
+
+!endif
+
-C When\swriting\sto\san\sFTS\stable,\stake\san\sexclusive\sshared-cache\slock\son\sthe\s%_segdir\stable\sbefore\swriting.\sOtherwise,\san\sxCommit()\scall\smay\sreport\san\sSQLITE_LOCKED\serror.
-D 2013-05-27T10:11:53.308
+C Add\sthe\sfiles\sused\sto\sbuild\sthe\samalgamation-autoconf\spackage.
+D 2013-05-27T17:19:58.423
F Makefile.arm-wince-mingw32ce-gcc d6df77f1f48d690bd73162294bbba7f59507c72f
F Makefile.in f6b58b7bdf6535f0f0620c486dd59aa4662c0b4f
F Makefile.linux-gcc 91d710bdc4998cb015f39edf3cb314ec4f4d7e23
F art/sqlite370.eps aa97a671332b432a54e1d74ff5e8775be34200c2
F art/sqlite370.ico af56c1d00fee7cd4753e8631ed60703ed0fc6e90
F art/sqlite370.jpg d512473dae7e378a67e28ff96a34da7cb331def2
+F autoconf/INSTALL 83e4a25da9fd053c7b3665eaaaf7919707915903
+F autoconf/Makefile.am 8fc2972d92769cf20ab8e4a73ea901b84d69bf44
+F autoconf/README 14458f1046c118efa721aadec5f227e876d3cd38
+F autoconf/README.first 47dd53221023b18c836ab00dba6e00bd86132453
+F autoconf/config.guess 94cc57e2a3fdb9c235b362ace86d77e89d188cad x
+F autoconf/config.sub 1efb390a8fb4bfafd74783a15a8fb5311c84300e x
+F autoconf/configure.ac ba3e99ba1a8171d0682b68443517088fc5d6f13a
+F autoconf/depcomp 0b26f101e3bc9fd1ff0be1da9fb4a82371142f92 x
+F autoconf/install-sh 06ee6336e63bb845c8439d777c32eb2eccc4fbf1 x
+F autoconf/ltmain.sh 7a658a24028f02331c1d2446562758083c5eadd1
+F autoconf/missing d7c9981a81af13370d4ed152b24c0a82b7028585 x
+F autoconf/tea/Makefile.in 5c3b0bdfb66c20d55ebff59d1718864461570ca9
+F autoconf/tea/README 3e9a3c060f29a44344ab50aec506f4db903fb873
+F autoconf/tea/aclocal.m4 52c47aac44ce0ddb1f918b6993e8beb8eee88f43
+F autoconf/tea/configure.in e0466b881b53f31f5a4a69e7a91ad130902fb359
+F autoconf/tea/doc/sqlite3.n e268faa1691c33663d3a7faf9fa30673d14bd879
+F autoconf/tea/license.terms 13bd403c9610fd2b76ece0ab50c4c5eda933d523
+F autoconf/tea/pkgIndex.tcl.in 3ef61715cf1c7bdcff56947ffadb26bc991ca39d
+F autoconf/tea/tclconfig/install-sh b087e5c4b92820c60bffb74acc1d9c2d40d80b8f
+F autoconf/tea/tclconfig/tcl.m4 a68179d7cc45524fa59db428a36610e20bdba808
+F autoconf/tea/win/makefile.vc f89d0184d0eee5f7e356ea407964dcd139939928
+F autoconf/tea/win/nmakehlp.c 2070e086f39866b353a482d3a14dedaf26196506
+F autoconf/tea/win/rules.vc c511f222b80064096b705dbeb97060ee1d6b6d63
F config.guess 226d9a188c6196f3033ffc651cbc9dcee1a42977
F config.h.in 0921066a13130082764ab4ab6456f7b5bebe56de
F config.sub 9ebe4c3b3dab6431ece34f16828b594fb420da55
F tool/warnings-clang.sh f6aa929dc20ef1f856af04a730772f59283631d4
F tool/warnings.sh fbc018d67fd7395f440c28f33ef0f94420226381
F tool/win/sqlite.vsix 97894c2790eda7b5bce3cc79cb2a8ec2fde9b3ac
-P 61a10452399db28cd5ea4ba9d416b87a34c2eddb
-R 5b2b7d523083ab3d77d86c0cce4d267d
+P 3cd2da42e9403b1e6243ad53f3f2bbf89c0fb9b0
+R 36bfb90ebfbfa2dc4a4f5f2d201ce940
+T *branch * autoconf-package
+T *sym-autoconf-package *
+T -sym-trunk *
U dan
-Z 5b590f475035536f2f371b845c79a1e4
+Z b353aa1f8164c124057d033967eb5644
-3cd2da42e9403b1e6243ad53f3f2bbf89c0fb9b0
\ No newline at end of file
+048865e8fdd2bef6b43b6cebd45fae94c8a1ab20
\ No newline at end of file
projects / thirdparty / sqlite.git / commitdiff
