arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board

Add basic support for the Yuridenki-Shokai Kakip board based on
R9A09G057H48, including:
  - Memory
  - OSTM0 - OSTM7
  - Pin Control
  - Input clocks
  - SCIF
  - SDHI0

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250116144752.1738574-5-iwamatsu@nigauri.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 928635f2e76bbb6b1216388c1a0c656a64fc0eaa..698f790bd42524ba56623d032154641e87b72f5b 100644 (file)
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -149,6 +149,7 @@ dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb
+dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
 
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo

diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
new file mode 100644 (file)
index 0000000..d2586d2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for Yuridenki-Shokai the Kakip board
+ *
+ * Copyright (C) 2024 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/renesas,r9a09g057-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g057.dtsi"
+
+/ {
+       model = "Yuridenki-Shokai Kakip Board based on r9a09g057h48";
+       compatible = "yuridenki,kakip", "renesas,r9a09g057h48", "renesas,r9a09g057";
+
+       aliases {
+               serial0 = &scif;
+               mmc0 = &sdhi0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@48000000 {
+               device_type = "memory";
+               /* first 128MB is reserved for secure area. */
+               reg = <0x0 0x48000000 0x1 0xF8000000>;
+       };
+
+       reg_3p3v: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       vqmmc_sdhi0: regulator-vccq-sdhi0 {
+               compatible = "regulator-gpio";
+               regulator-name = "SDHI0 VccQ";
+               gpios = <&pinctrl RZV2H_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+               gpios-states = <0>;
+               states = <3300000 0>, <1800000 1>;
+       };
+};
+
+&ostm0 {
+       status = "okay";
+};
+
+&ostm1 {
+       status = "okay";
+};
+
+&ostm2 {
+       status = "okay";
+};
+
+&ostm3 {
+       status = "okay";
+};
+
+&ostm4 {
+       status = "okay";
+};
+
+&ostm5 {
+       status = "okay";
+};
+
+&ostm6 {
+       status = "okay";
+};
+
+&ostm7 {
+       status = "okay";
+};
+
+&pinctrl {
+       scif_pins: scif {
+               pins =  "SCIF_RXD", "SCIF_TXD";
+       };
+
+       sd0-pwr-en-hog {
+               gpio-hog;
+               gpios = <RZV2H_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "sd0_pwr_en";
+       };
+
+       sdhi0_pins: sd0 {
+               sd0-clk {
+                       pins = "SD0CLK";
+                       renesas,output-impedance = <3>;
+                       slew-rate = <0>;
+               };
+
+               sd0-data {
+                       pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD";
+                       input-enable;
+                       renesas,output-impedance = <3>;
+                       slew-rate = <0>;
+               };
+
+               sd0-mux {
+                       pinmux = <RZV2H_PORT_PINMUX(A, 5, 15)>; /* SD0_CD */
+               };
+       };
+};
+
+&qextal_clk {
+       clock-frequency = <24000000>;
+};
+
+&scif {
+       pinctrl-0 = <&scif_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-names = "default";
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&vqmmc_sdhi0>;
+       bus-width = <4>;
+
+       status = "okay";
+};