]> git.ipfire.org Git - thirdparty/kernel/stable-queue.git/commitdiff
6.1-stable patches
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 17 Jul 2023 20:12:28 +0000 (22:12 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 17 Jul 2023 20:12:28 +0000 (22:12 +0200)
added patches:
io_uring-use-io_schedule-in-cqring-wait.patch

queue-6.1/io_uring-use-io_schedule-in-cqring-wait.patch [new file with mode: 0644]
queue-6.1/series

diff --git a/queue-6.1/io_uring-use-io_schedule-in-cqring-wait.patch b/queue-6.1/io_uring-use-io_schedule-in-cqring-wait.patch
new file mode 100644 (file)
index 0000000..bbd3b7e
--- /dev/null
@@ -0,0 +1,79 @@
+From f5f24ec27340daf12177fd09c2d107a589cbf527 Mon Sep 17 00:00:00 2001
+From: Andres Freund <andres@anarazel.de>
+Date: Sun, 16 Jul 2023 12:13:06 -0600
+Subject: io_uring: Use io_schedule* in cqring wait
+
+From: Andres Freund <andres@anarazel.de>
+
+Commit 8a796565cec3601071cbbd27d6304e202019d014 upstream.
+
+I observed poor performance of io_uring compared to synchronous IO. That
+turns out to be caused by deeper CPU idle states entered with io_uring,
+due to io_uring using plain schedule(), whereas synchronous IO uses
+io_schedule().
+
+The losses due to this are substantial. On my cascade lake workstation,
+t/io_uring from the fio repository e.g. yields regressions between 20%
+and 40% with the following command:
+./t/io_uring -r 5 -X0 -d 1 -s 1 -c 1 -p 0 -S$use_sync -R 0 /mnt/t2/fio/write.0.0
+
+This is repeatable with different filesystems, using raw block devices
+and using different block devices.
+
+Use io_schedule_prepare() / io_schedule_finish() in
+io_cqring_wait_schedule() to address the difference.
+
+After that using io_uring is on par or surpassing synchronous IO (using
+registered files etc makes it reliably win, but arguably is a less fair
+comparison).
+
+There are other calls to schedule() in io_uring/, but none immediately
+jump out to be similarly situated, so I did not touch them. Similarly,
+it's possible that mutex_lock_io() should be used, but it's not clear if
+there are cases where that matters.
+
+Cc: stable@vger.kernel.org # 5.10+
+Cc: Pavel Begunkov <asml.silence@gmail.com>
+Cc: io-uring@vger.kernel.org
+Cc: linux-kernel@vger.kernel.org
+Signed-off-by: Andres Freund <andres@anarazel.de>
+Link: https://lore.kernel.org/r/20230707162007.194068-1-andres@anarazel.de
+[axboe: minor style fixup]
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ io_uring/io_uring.c |   15 ++++++++++++---
+ 1 file changed, 12 insertions(+), 3 deletions(-)
+
+--- a/io_uring/io_uring.c
++++ b/io_uring/io_uring.c
+@@ -2346,7 +2346,7 @@ static inline int io_cqring_wait_schedul
+                                         struct io_wait_queue *iowq,
+                                         ktime_t *timeout)
+ {
+-      int ret;
++      int token, ret;
+       unsigned long check_cq;
+       /* make sure we run task_work before checking for signals */
+@@ -2362,9 +2362,18 @@ static inline int io_cqring_wait_schedul
+               if (check_cq & BIT(IO_CHECK_CQ_DROPPED_BIT))
+                       return -EBADR;
+       }
++
++      /*
++       * Use io_schedule_prepare/finish, so cpufreq can take into account
++       * that the task is waiting for IO - turns out to be important for low
++       * QD IO.
++       */
++      token = io_schedule_prepare();
++      ret = 1;
+       if (!schedule_hrtimeout(timeout, HRTIMER_MODE_ABS))
+-              return -ETIME;
+-      return 1;
++              ret = -ETIME;
++      io_schedule_finish(token);
++      return ret;
+ }
+ /*
index 6778267a489df842d52d0e2c45b728c21523be3d..ab566a7ac8da6c4708dd1e04cb8e40102dfdb96f 100644 (file)
@@ -586,3 +586,4 @@ sh-mach-r2d-handle-virq-offset-in-cascaded-irl-demux.patch
 sh-mach-highlander-handle-virq-offset-in-cascaded-irl-demux.patch
 sh-mach-dreamcast-handle-virq-offset-in-cascaded-irq-demux.patch
 sh-hd64461-handle-virq-offset-for-offchip-irq-base-and-hd64461-irq.patch
+io_uring-use-io_schedule-in-cqring-wait.patch