arm64: dts: freescale: imx8mm-verdin: Keep LDO5 always on

LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.

When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.

[   31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[   31.821761] PMIC_USDHC_VSELECT: disabling
[   32.764949] fec 30be0000.ethernet end0: Link is Down

Fix this keeping the LDO5 supply always on.

Cc: stable@vger.kernel.org
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index d297107725692e5eda5f357a688c5e268696d6bf..1594ce9182a5826357d376fa70899b6dc333e3ef 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -464,6 +464,7 @@
                        };
 
                        reg_nvcc_sd: LDO5 {
+                               regulator-always-on;
                                regulator-max-microvolt = <3300000>;
                                regulator-min-microvolt = <1800000>;
                                regulator-name = "On-module +V3.3_1.8_SD (LDO5)";