#include <linux/bits.h>
#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
#include <linux/dmaengine.h>
#include "../serial_mctrl_gpio.h"
#define UART_BUG_THRE BIT(3) /* UART has buggy THRE reassertion */
#define UART_BUG_TXRACE BIT(5) /* UART Tx fails to set remote DR */
+/* Module parameters */
+#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
+
+extern unsigned int nr_uarts;
#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
#define SERIAL8250_SHARE_IRQS 1
#define SERIAL8250_SHARE_IRQS 0
#endif
+extern unsigned int share_irqs;
+extern unsigned int skip_txen_test;
+
#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \
{ \
.iobase = _base, \
#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
+extern struct uart_driver serial8250_reg;
+void serial8250_register_ports(struct uart_driver *drv, struct device *dev);
+
+/* Legacy ISA bus related APIs */
+typedef void (*serial8250_isa_config_fn)(int, struct uart_port *, u32 *);
+extern serial8250_isa_config_fn serial8250_isa_config;
+
+void serial8250_isa_init_ports(void);
+
+extern struct platform_device *serial8250_isa_devs;
+
extern const struct uart_ops *univ8250_port_base_ops;
+extern struct uart_ops univ8250_port_ops;
static inline int serial_in(struct uart_8250_port *up, int offset)
{
return true;
}
+struct uart_8250_port *serial8250_setup_port(int index);
struct uart_8250_port *serial8250_get_port(int line);
void serial8250_rpm_get(struct uart_8250_port *p);
*
* Copyright (C) 2001 Russell King.
*
- * Supports: ISA-compatible 8250/16550 ports
- * PNP 8250/16550 ports
+ * Supports:
* early_serial_setup() ports
* userspace-configurable "phantom" ports
- * "serial8250" platform devices
* serial8250_register_8250_port() ports
*/
#include <linux/string_helpers.h>
#include <linux/uaccess.h>
#include <linux/io.h>
-#ifdef CONFIG_SPARC
-#include <linux/sunserialcore.h>
-#endif
#include <asm/irq.h>
-#include "../serial_base.h" /* For serial_base_add_isa_preferred_console() */
-
#include "8250.h"
-/*
- * Configuration:
- * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
- * is unsafe when used on edge-triggered interrupts.
- */
-static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
-
-static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
-
-static struct uart_driver serial8250_reg;
-
-static unsigned int skip_txen_test; /* force skip of txen test at init time */
-
#define PASS_LIMIT 512
-#include <asm/serial.h>
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static const struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
-};
-
-#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
-
struct irq_info {
struct hlist_node node;
int irq;
}
const struct uart_ops *univ8250_port_base_ops = NULL;
-static struct uart_ops univ8250_port_ops;
+struct uart_ops univ8250_port_ops;
static const struct uart_8250_ops univ8250_driver_ops = {
.setup_irq = univ8250_setup_irq,
}
EXPORT_SYMBOL_GPL(serial8250_get_port);
-static void (*serial8250_isa_config)(int port, struct uart_port *up,
- u32 *capabilities);
-
-void serial8250_set_isa_configurator(
- void (*v)(int port, struct uart_port *up, u32 *capabilities))
-{
- serial8250_isa_config = v;
-}
-EXPORT_SYMBOL(serial8250_set_isa_configurator);
-
static inline void serial8250_apply_quirks(struct uart_8250_port *up)
{
up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0;
}
-static struct uart_8250_port *serial8250_setup_port(int index)
+struct uart_8250_port *serial8250_setup_port(int index)
{
struct uart_8250_port *up;
return up;
}
-static void __init serial8250_isa_init_ports(void)
-{
- struct uart_8250_port *up;
- static int first = 1;
- int i, irqflag = 0;
-
- if (!first)
- return;
- first = 0;
-
- if (nr_uarts > UART_NR)
- nr_uarts = UART_NR;
-
- /*
- * Set up initial isa ports based on nr_uart module param, or else
- * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not
- * need to increase nr_uarts when setting up the initial isa ports.
- */
- for (i = 0; i < nr_uarts; i++)
- serial8250_setup_port(i);
-
- /* chain base port ops to support Remote Supervisor Adapter */
- univ8250_port_ops = *univ8250_port_base_ops;
- univ8250_rsa_support(&univ8250_port_ops);
-
- if (share_irqs)
- irqflag = IRQF_SHARED;
-
- for (i = 0, up = serial8250_ports;
- i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
- i++, up++) {
- struct uart_port *port = &up->port;
-
- port->iobase = old_serial_port[i].port;
- port->irq = irq_canonicalize(old_serial_port[i].irq);
- port->irqflags = 0;
- port->uartclk = old_serial_port[i].baud_base * 16;
- port->flags = old_serial_port[i].flags;
- port->hub6 = 0;
- port->membase = old_serial_port[i].iomem_base;
- port->iotype = old_serial_port[i].io_type;
- port->regshift = old_serial_port[i].iomem_reg_shift;
-
- port->irqflags |= irqflag;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(i, &up->port, &up->capabilities);
-
- serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i);
- }
-}
-
-static void __init
-serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+void __init serial8250_register_ports(struct uart_driver *drv, struct device *dev)
{
int i;
#define SERIAL8250_CONSOLE NULL
#endif
-static struct uart_driver serial8250_reg = {
+struct uart_driver serial8250_reg = {
.owner = THIS_MODULE,
.driver_name = "serial",
.dev_name = "ttyS",
}
EXPORT_SYMBOL(serial8250_resume_port);
-/*
- * Register a set of serial devices attached to a platform device. The
- * list is terminated with a zero flags entry, which means we expect
- * all entries to have at least UPF_BOOT_AUTOCONF set.
- */
-static int serial8250_probe(struct platform_device *dev)
-{
- struct plat_serial8250_port *p = dev_get_platdata(&dev->dev);
- struct uart_8250_port uart;
- int ret, i, irqflag = 0;
-
- memset(&uart, 0, sizeof(uart));
-
- if (share_irqs)
- irqflag = IRQF_SHARED;
-
- for (i = 0; p && p->flags != 0; p++, i++) {
- uart.port.iobase = p->iobase;
- uart.port.membase = p->membase;
- uart.port.irq = p->irq;
- uart.port.irqflags = p->irqflags;
- uart.port.uartclk = p->uartclk;
- uart.port.regshift = p->regshift;
- uart.port.iotype = p->iotype;
- uart.port.flags = p->flags;
- uart.port.mapbase = p->mapbase;
- uart.port.mapsize = p->mapsize;
- uart.port.hub6 = p->hub6;
- uart.port.has_sysrq = p->has_sysrq;
- uart.port.private_data = p->private_data;
- uart.port.type = p->type;
- uart.bugs = p->bugs;
- uart.port.serial_in = p->serial_in;
- uart.port.serial_out = p->serial_out;
- uart.dl_read = p->dl_read;
- uart.dl_write = p->dl_write;
- uart.port.handle_irq = p->handle_irq;
- uart.port.handle_break = p->handle_break;
- uart.port.set_termios = p->set_termios;
- uart.port.set_ldisc = p->set_ldisc;
- uart.port.get_mctrl = p->get_mctrl;
- uart.port.pm = p->pm;
- uart.port.dev = &dev->dev;
- uart.port.irqflags |= irqflag;
- ret = serial8250_register_8250_port(&uart);
- if (ret < 0) {
- dev_err(&dev->dev, "unable to register port at index %d "
- "(IO%lx MEM%llx IRQ%d): %d\n", i,
- p->iobase, (unsigned long long)p->mapbase,
- p->irq, ret);
- }
- }
- return 0;
-}
-
-/*
- * Remove serial ports registered against a platform device.
- */
-static void serial8250_remove(struct platform_device *dev)
-{
- int i;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.dev == &dev->dev)
- serial8250_unregister_port(i);
- }
-}
-
-static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- uart_suspend_port(&serial8250_reg, &up->port);
- }
-
- return 0;
-}
-
-static int serial8250_resume(struct platform_device *dev)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- serial8250_resume_port(i);
- }
-
- return 0;
-}
-
-static struct platform_driver serial8250_isa_driver = {
- .probe = serial8250_probe,
- .remove_new = serial8250_remove,
- .suspend = serial8250_suspend,
- .resume = serial8250_resume,
- .driver = {
- .name = "serial8250",
- },
-};
-
-/*
- * This "device" covers _all_ ISA 8250-compatible serial devices listed
- * in the table in include/asm/serial.h
- */
-static struct platform_device *serial8250_isa_devs;
-
/*
* serial8250_register_8250_port and serial8250_unregister_port allows for
* 16x50 serial ports to be configured at run-time, to support PCMCIA
}
EXPORT_SYMBOL(serial8250_unregister_port);
-static int __init serial8250_init(void)
-{
- int ret;
-
- if (nr_uarts == 0)
- return -ENODEV;
-
- serial8250_isa_init_ports();
-
- pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %s\n",
- nr_uarts, str_enabled_disabled(share_irqs));
-
-#ifdef CONFIG_SPARC
- ret = sunserial_register_minors(&serial8250_reg, UART_NR);
-#else
- serial8250_reg.nr = UART_NR;
- ret = uart_register_driver(&serial8250_reg);
-#endif
- if (ret)
- goto out;
-
- ret = serial8250_pnp_init();
- if (ret)
- goto unreg_uart_drv;
-
- serial8250_isa_devs = platform_device_alloc("serial8250",
- PLAT8250_DEV_LEGACY);
- if (!serial8250_isa_devs) {
- ret = -ENOMEM;
- goto unreg_pnp;
- }
-
- ret = platform_device_add(serial8250_isa_devs);
- if (ret)
- goto put_dev;
-
- serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
-
- ret = platform_driver_register(&serial8250_isa_driver);
- if (ret == 0)
- goto out;
-
- platform_device_del(serial8250_isa_devs);
-put_dev:
- platform_device_put(serial8250_isa_devs);
-unreg_pnp:
- serial8250_pnp_exit();
-unreg_uart_drv:
-#ifdef CONFIG_SPARC
- sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
- uart_unregister_driver(&serial8250_reg);
-#endif
-out:
- return ret;
-}
-
-static void __exit serial8250_exit(void)
-{
- struct platform_device *isa_dev = serial8250_isa_devs;
-
- /*
- * This tells serial8250_unregister_port() not to re-register
- * the ports (thereby making serial8250_isa_driver permanently
- * in use.)
- */
- serial8250_isa_devs = NULL;
-
- platform_driver_unregister(&serial8250_isa_driver);
- platform_device_unregister(isa_dev);
-
- serial8250_pnp_exit();
-
-#ifdef CONFIG_SPARC
- sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
- uart_unregister_driver(&serial8250_reg);
-#endif
-}
-
-module_init(serial8250_init);
-module_exit(serial8250_exit);
-
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
-
-module_param_hw(share_irqs, uint, other, 0644);
-MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");
-
-module_param(nr_uarts, uint, 0644);
-MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
-
-module_param(skip_txen_test, uint, 0644);
-MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
-
-MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
-
-#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
-#ifndef MODULE
-/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
- * working as well for the module options so we don't break people. We
- * need to keep the names identical and the convenient macros will happily
- * refuse to let us do that by failing the build with redefinition errors
- * of global variables. So we stick them inside a dummy function to avoid
- * those conflicts. The options still get parsed, and the redefined
- * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
- *
- * This is hacky. I'm sorry.
- */
-static void __used s8250_options(void)
-{
-#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250_core."
-
- module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644);
- module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644);
- module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644);
-}
-#else
-MODULE_ALIAS("8250_core");
-#endif
-#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Universal/legacy platform driver for 8250/16550-type serial ports
+ *
+ * Supports: ISA-compatible 8250/16550 ports
+ * PNP 8250/16550 ports
+ * "serial8250" platform devices
+ */
+#include <linux/array_size.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+
+#include <linux/serial_8250.h>
+
+#ifdef CONFIG_SPARC
+#include <linux/sunserialcore.h>
+#endif
+
+#include "../serial_base.h" /* For serial_base_add_isa_preferred_console() */
+#include "8250.h"
+
+/*
+ * Configuration:
+ * share_irqs Whether we pass IRQF_SHARED to request_irq().
+ * This option is unsafe when used on edge-triggered interrupts.
+ * skip_txen_test Force skip of txen test at init time.
+ */
+unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+unsigned int skip_txen_test;
+
+unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+
+#include <asm/serial.h>
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static const struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+serial8250_isa_config_fn serial8250_isa_config;
+void serial8250_set_isa_configurator(serial8250_isa_config_fn v)
+{
+ serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
+void __init serial8250_isa_init_ports(void)
+{
+ static int first = 1;
+ int i, irqflag = 0;
+
+ if (!first)
+ return;
+ first = 0;
+
+ if (nr_uarts > UART_NR)
+ nr_uarts = UART_NR;
+
+ /*
+ * Set up initial isa ports based on nr_uart module param, or else
+ * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not
+ * need to increase nr_uarts when setting up the initial isa ports.
+ */
+ for (i = 0; i < nr_uarts; i++)
+ serial8250_setup_port(i);
+
+ /* chain base port ops to support Remote Supervisor Adapter */
+ univ8250_port_ops = *univ8250_port_base_ops;
+ univ8250_rsa_support(&univ8250_port_ops);
+
+ if (share_irqs)
+ irqflag = IRQF_SHARED;
+
+ for (i = 0; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++) {
+ struct uart_8250_port *up = serial8250_get_port(i);
+ struct uart_port *port = &up->port;
+
+ port->iobase = old_serial_port[i].port;
+ port->irq = irq_canonicalize(old_serial_port[i].irq);
+ port->irqflags = 0;
+ port->uartclk = old_serial_port[i].baud_base * 16;
+ port->flags = old_serial_port[i].flags;
+ port->hub6 = 0;
+ port->membase = old_serial_port[i].iomem_base;
+ port->iotype = old_serial_port[i].io_type;
+ port->regshift = old_serial_port[i].iomem_reg_shift;
+
+ port->irqflags |= irqflag;
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(i, &up->port, &up->capabilities);
+
+ serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i);
+ }
+}
+
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+static int serial8250_probe(struct platform_device *dev)
+{
+ struct plat_serial8250_port *p = dev_get_platdata(&dev->dev);
+ struct uart_8250_port uart;
+ int ret, i, irqflag = 0;
+
+ memset(&uart, 0, sizeof(uart));
+
+ if (share_irqs)
+ irqflag = IRQF_SHARED;
+
+ for (i = 0; p && p->flags != 0; p++, i++) {
+ uart.port.iobase = p->iobase;
+ uart.port.membase = p->membase;
+ uart.port.irq = p->irq;
+ uart.port.irqflags = p->irqflags;
+ uart.port.uartclk = p->uartclk;
+ uart.port.regshift = p->regshift;
+ uart.port.iotype = p->iotype;
+ uart.port.flags = p->flags;
+ uart.port.mapbase = p->mapbase;
+ uart.port.mapsize = p->mapsize;
+ uart.port.hub6 = p->hub6;
+ uart.port.has_sysrq = p->has_sysrq;
+ uart.port.private_data = p->private_data;
+ uart.port.type = p->type;
+ uart.bugs = p->bugs;
+ uart.port.serial_in = p->serial_in;
+ uart.port.serial_out = p->serial_out;
+ uart.dl_read = p->dl_read;
+ uart.dl_write = p->dl_write;
+ uart.port.handle_irq = p->handle_irq;
+ uart.port.handle_break = p->handle_break;
+ uart.port.set_termios = p->set_termios;
+ uart.port.set_ldisc = p->set_ldisc;
+ uart.port.get_mctrl = p->get_mctrl;
+ uart.port.pm = p->pm;
+ uart.port.dev = &dev->dev;
+ uart.port.irqflags |= irqflag;
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0) {
+ dev_err(&dev->dev, "unable to register port at index %d "
+ "(IO%lx MEM%llx IRQ%d): %d\n", i,
+ p->iobase, (unsigned long long)p->mapbase,
+ p->irq, ret);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static void serial8250_remove(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = serial8250_get_port(i);
+
+ if (up->port.dev == &dev->dev)
+ serial8250_unregister_port(i);
+ }
+}
+
+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = serial8250_get_port(i);
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ uart_suspend_port(&serial8250_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int serial8250_resume(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = serial8250_get_port(i);
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ serial8250_resume_port(i);
+ }
+
+ return 0;
+}
+
+static struct platform_driver serial8250_isa_driver = {
+ .probe = serial8250_probe,
+ .remove_new = serial8250_remove,
+ .suspend = serial8250_suspend,
+ .resume = serial8250_resume,
+ .driver = {
+ .name = "serial8250",
+ },
+};
+
+/*
+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
+ * in the table in include/asm/serial.h
+ */
+struct platform_device *serial8250_isa_devs;
+
+static int __init serial8250_init(void)
+{
+ int ret;
+
+ if (nr_uarts == 0)
+ return -ENODEV;
+
+ serial8250_isa_init_ports();
+
+ pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %s\n",
+ nr_uarts, str_enabled_disabled(share_irqs));
+
+#ifdef CONFIG_SPARC
+ ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+ serial8250_reg.nr = UART_NR;
+ ret = uart_register_driver(&serial8250_reg);
+#endif
+ if (ret)
+ goto out;
+
+ ret = serial8250_pnp_init();
+ if (ret)
+ goto unreg_uart_drv;
+
+ serial8250_isa_devs = platform_device_alloc("serial8250",
+ PLAT8250_DEV_LEGACY);
+ if (!serial8250_isa_devs) {
+ ret = -ENOMEM;
+ goto unreg_pnp;
+ }
+
+ ret = platform_device_add(serial8250_isa_devs);
+ if (ret)
+ goto put_dev;
+
+ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
+
+ ret = platform_driver_register(&serial8250_isa_driver);
+ if (ret == 0)
+ goto out;
+
+ platform_device_del(serial8250_isa_devs);
+put_dev:
+ platform_device_put(serial8250_isa_devs);
+unreg_pnp:
+ serial8250_pnp_exit();
+unreg_uart_drv:
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
+ uart_unregister_driver(&serial8250_reg);
+#endif
+out:
+ return ret;
+}
+module_init(serial8250_init);
+
+static void __exit serial8250_exit(void)
+{
+ struct platform_device *isa_dev = serial8250_isa_devs;
+
+ /*
+ * This tells serial8250_unregister_port() not to re-register
+ * the ports (thereby making serial8250_isa_driver permanently
+ * in use.)
+ */
+ serial8250_isa_devs = NULL;
+
+ platform_driver_unregister(&serial8250_isa_driver);
+ platform_device_unregister(isa_dev);
+
+ serial8250_pnp_exit();
+
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
+ uart_unregister_driver(&serial8250_reg);
+#endif
+}
+module_exit(serial8250_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial platform driver");
+
+module_param_hw(share_irqs, uint, other, 0644);
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");
+
+module_param(nr_uarts, uint, 0644);
+MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
+
+module_param(skip_txen_test, uint, 0644);
+MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
+ * working as well for the module options so we don't break people. We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables. So we stick them inside a dummy function to avoid
+ * those conflicts. The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky. I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250_core."
+
+ module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644);
+ module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644);
+ module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644);
+}
+#else
+MODULE_ALIAS("8250_core");
+#endif
+#endif
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o
8250-y := 8250_core.o
+8250-y += 8250_platform.o
8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
8250-$(CONFIG_SERIAL_8250_RSA) += 8250_rsa.o
+
+obj-$(CONFIG_SERIAL_8250) += 8250_base.o
8250_base-y := 8250_port.o
8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o
projects / thirdparty / kernel / linux.git / commitdiff
