ath79: tl-wdr4900-v2: set ath9k led-pin

Instead of having two LED entries that supposedly control the same
thing, set the pin properly.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18905
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
index e5da140364e2cbc3399b2b36a7b412b7d22892a2..8761e998ecebf68fe2b4f58003425ce5ba029b43 100644 (file)
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
@@ -40,28 +40,12 @@
                        linux,default-trigger = "usbport";
                };
 
-               wlan2g {
-                       label = "blue:wlan2g";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
                qss {
                        label = "blue:qss";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
        };
 
-       ath9k-leds {
-               compatible = "gpio-leds";
-
-               wlan5g {
-                       label = "blue:wlan5g";
-                       gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-       };
-
        keys {
                compatible = "gpio-keys";
 
@@ -93,13 +77,16 @@
 &pcie1 {
        status = "okay";
 
-       ath9k: wifi@0,0 {
+       wifi@0,0 {
                compatible = "pci168c,0033";
                reg = <0x0000 0 0 0 0>;
                nvmem-cells = <&macaddr_uboot_1fc00 (-2)>, <&cal_ath9k_pci>;
                nvmem-cell-names = "mac-address", "calibration";
-               #gpio-cells = <2>;
-               gpio-controller;
+
+               led {
+                       led-sources = <0>;
+                       led-active-low;
+               };
        };
 };
 
@@ -230,4 +217,9 @@
 
        nvmem-cells = <&macaddr_uboot_1fc00 (-1)>, <&cal_ath9k_soc>;
        nvmem-cell-names = "mac-address", "calibration";
+
+       led {
+               led-sources = <12>;
+               led-active-low;
+       };
 };