]> git.ipfire.org Git - thirdparty/openwrt.git/commitdiff
mediatek: filogic: add support for AsiaRF AP7986-003 20071/head
authorElwin Huang <s09289728096@gmail.com>
Wed, 17 Sep 2025 09:59:46 +0000 (09:59 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Sat, 20 Sep 2025 17:13:47 +0000 (19:13 +0200)
- SoC           : MediaTek MT7986AV, Quad-core 2.0 GHz ARM Cortex-A53 CPU
- RAM           : DDR3 512 MiB (Micron MT41K256M16TW-107)
- Flash         : SPI-NAND 128 MiB (Winbound W25N01GVZEIG)
- Ethernet      : 6 ports
  - LAN :
      5x 10/100/1000 Mbps RJ-45 Port
  - WAN :
      1x 10/100/1000/2500 Mbps RJ-45 Port (MaxLinear GPY211B1VC-LN8A)
- LED           : 19x LEDs (Green)
    1x  Power
    1x  Status (PWM-LED)
    1x  Debug (PWM-LED)
    2x  WiFi activity
    10x Ethernet LAN activity
    4x  Ethernet WAN activity
- UART          : 1x4 pin header on PCB [J1]
  - arrangement : 3.3V, RX, TX, GND
  - settings    : 115200, 8n1
- Button        : 3x (Reset, WPS, Power)
- WiFi          : 2x
    WiFi 6 2.4 Ghz + 5 Ghz (Mediatek MT7975N+MT7975PN)
- Socket        :
    1x Raspberry header 13x2
    1x JTAG 10x2
    1x USB-A (USB 3.0)
- Power         : 12V DC, 3A

MAC addresses :
    WLAN:       00:0A:52:xx:xx:xx   (Factory, 0x6)
    LAN:        00:0A:52:xx:xx:xx   (Factory, 0x24)
    WAN:        00:0A:52:xx:xx:xx   (Factory, 0x2a)

Flash instruction through LuCI:

This device is flashed OpenWRT base firmware with this target.
The LuCI webpage is integrated in default for upgrading.

Flash instruction through u-boot:

1. Prepare the TFTP server on PC.
2. Connect uart to PC, select "2. Upgrade firmware" in u-boot menu.
3. Select "0 - TFTP client (Default)", input client IP, server IP, IP netmask, flashed bin file path
4. Wait about 20 seconds to complete flashing

Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20071
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
target/linux/mediatek/dts/mt7986a-asiarf-ap7986-003.dts [new file with mode: 0644]
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
target/linux/mediatek/image/filogic.mk

index 8f75c8591597fdea7a9725a20cfa1f19774608d6..dd65d687794ab5c9d1bb81b9229138e9387422d7 100644 (file)
@@ -85,6 +85,7 @@ comfast,cf-e393ax|\
 iptime,ax3000m)
        ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
        ;;
+asiarf,ap7986-003|\
 cetron,ct3003|\
 edgecore,eap111|\
 netgear,wax220|\
diff --git a/target/linux/mediatek/dts/mt7986a-asiarf-ap7986-003.dts b/target/linux/mediatek/dts/mt7986a-asiarf-ap7986-003.dts
new file mode 100644 (file)
index 0000000..12c0e90
--- /dev/null
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 AsiaRF Co., Ltd
+ * Author: Elwin Huang <elwin@asiarf.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+#include "mt7986a.dtsi"
+
+/ {
+       model = "AsiaRF AP7986-003";
+       compatible = "asiarf,ap7986-003", "mediatek,mt7986a-rfb";
+
+       aliases {
+               serial0 = &uart0;
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_green;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_green;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@40000000 {
+               reg = <0 0x40000000 0 0x20000000>;
+               device_type = "memory";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       pwm-leds {
+               compatible = "pwm-leds";
+
+               led_status_green: led-0 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_STATUS;
+                       pwms = <&pwm 0 10000>;
+                       active-low;
+               };
+
+               led-1 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_DEBUG;
+                       pwms = <&pwm 1 10000>;
+                       linux,default-trigger = "pattern";
+                       led-pattern = <0 1000 255 1000>;
+                       active-low;
+               };
+       };
+
+       reg_1p8v: regulator-1p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-1.8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_3p3v: regulator-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_5v: regulator-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&eth {
+       status = "okay";
+
+       gmac0: mac@0 {
+               compatible = "mediatek,eth-mac";
+               reg = <0>;
+               phy-mode = "2500base-x";
+               nvmem-cells = <&macaddr_factory_24>;
+               nvmem-cell-names = "mac-address";
+
+               fixed-link {
+                       speed = <2500>;
+                       full-duplex;
+                       pause;
+               };
+       };
+
+       mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-handle = <&phy6>;
+               phy-mode = "2500base-x";
+               nvmem-cells = <&macaddr_factory_2a>;
+               nvmem-cell-names = "mac-address";
+       };
+
+       mdio-bus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               phy6: phy@6 {
+                       compatible = "ethernet-phy-ieee802.3-c45";
+                       reg = <6>;
+
+                       reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+                       reset-deassert-us = <20000>;
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       interrupt-parent = <&pio>;
+                       interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               switch: switch@1f {
+                       compatible = "mediatek,mt7531";
+                       reg = <31>;
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       interrupt-parent = <&pio>;
+                       interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+                       reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+                                       label = "lan1";
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+                                       label = "lan2";
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+                                       label = "lan3";
+                               };
+
+                               port@3 {
+                                       reg = <3>;
+                                       label = "lan4";
+                               };
+
+                               port@4 {
+                                       reg = <4>;
+                                       label = "lan5";
+                               };
+
+                               port@6 {
+                                       reg = <6>;
+                                       ethernet = <&gmac0>;
+                                       phy-mode = "2500base-x";
+
+                                       fixed-link {
+                                               speed = <2500>;
+                                               full-duplex;
+                                               pause;
+                                       };
+                               };
+                       };
+               };
+       };
+};
+
+&wifi {
+       pinctrl-names = "default", "dbdc";
+       pinctrl-0 = <&wf_2g_5g_pins>;
+       pinctrl-1 = <&wf_dbdc_pins>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
+       status = "okay";
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie_pins>;
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};
+
+&pio {
+       pcie_pins: pcie-pins {
+               mux {
+                       function = "pcie";
+                       groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+               };
+       };
+       
+       pwm_pins: pwm-pins {
+               mux {
+                       function = "pwm";
+                       groups = "pwm0", "pwm1_0";
+               };
+       };
+
+       spic1_pins: spi-pins-23-to-26 {
+               mux {
+                       function = "spi";
+                       groups = "spi1_1";
+               };
+       };
+
+       spic2_pins: spi-flash-pins-29-to-32 {
+               mux {
+                       function = "spi";
+                       groups = "spi1_2";
+               };
+       };
+
+       spi_flash_pins: spi-flash-pins-33-to-38 {
+               mux {
+                       function = "spi";
+                       groups = "spi0", "spi0_wp_hold";
+               };
+               conf-pu {
+                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+                       drive-strength = <MTK_DRIVE_8mA>;
+                       bias-disable;   /* bias-disable */
+               };
+               conf-pd {
+                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+                       drive-strength = <MTK_DRIVE_8mA>;
+                       bias-disable;   /* bias-disable */
+               };
+       };
+
+       wf_2g_5g_pins: wf_2g_5g-pins {
+               mux {
+                       function = "wifi";
+                       groups = "wf_2g", "wf_5g";
+               };
+               conf {
+                       pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+                                  "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+                                  "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+                                  "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+                                  "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+                                  "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+                                  "WF1_TOP_CLK", "WF1_TOP_DATA";
+                       drive-strength = <MTK_DRIVE_4mA>;
+               };
+       };
+
+       wf_dbdc_pins: wf_dbdc-pins {
+               mux {
+                       function = "wifi";
+                       groups = "wf_dbdc";
+               };
+               conf {
+                       pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+                                  "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+                                  "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+                                  "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+                                  "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+                                  "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+                                  "WF1_TOP_CLK", "WF1_TOP_DATA";
+                       drive-strength = <MTK_DRIVE_4mA>;
+               };
+       };
+
+       i2c_pins: i2c-pins {
+               mux {
+                       function = "i2c";
+                       groups = "i2c";
+               };
+       };
+};
+
+&spi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi_flash_pins>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       spi_nand@1 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "spi-nand";
+               reg = <1>;
+               spi-max-frequency = <52000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+
+               mediatek,nmbm;
+               mediatek,bmt-max-ratio = <1>;
+               mediatek,bmt-max-reserved-blocks = <64>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "BL2";
+                               reg = <0x00000 0x0100000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "u-boot-env";
+                               reg = <0x0100000 0x0080000>;
+                       };
+
+                       partition@180000 {
+                               label = "Factory";
+                               reg = <0x0180000 0x0200000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x1000>;
+                                       };
+
+                                       macaddr_factory_24: macaddr@24 {
+                                               reg = <0x24 0x6>;
+                                       };
+
+                                       macaddr_factory_2a: macaddr@2a {
+                                               reg = <0x2a 0x6>;
+                                       };
+                               };
+                       };
+
+                       partition@380000 {
+                               label = "FIP";
+                               reg = <0x0380000 0x0200000>;
+                       };
+
+                       partition@580000 {
+                               label = "ubi";
+                               reg = <0x0580000 0x4000000>; // 64MB
+                       };
+
+                       partition@4580000 {
+                               label = "User_data";
+                               reg = <0x4580000 0x3280000>;
+                       };
+               };
+       };
+};
+
+&spi1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spic1_pins &spic2_pins>;
+       cs-gpios = <&pio 26 GPIO_ACTIVE_LOW>, <&pio 32 GPIO_ACTIVE_LOW>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c_pins>;
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&ssusb {
+       phys = <&u3port0 PHY_TYPE_USB3>,
+               <&u2port1 PHY_TYPE_USB2>;
+       vusb33-supply = <&reg_3p3v>;
+       vbus-supply = <&reg_5v>;
+       status = "okay";
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&trng {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&pwm {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pwm_pins>;
+       status = "okay";
+};
index a8c4565af0fa177b67a285a5930c5f1a5a7f9a7f..a7289b91dff2197e3eb28deb41f8351fa4394ce4 100644 (file)
@@ -68,6 +68,7 @@ mediatek_setup_interfaces()
        zbtlink,zbt-z8102ax-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
                ;;
+       asiarf,ap7986-003|\
        asus,tuf-ax6000|\
        glinet,gl-mt6000|\
        tplink,tl-xdr4288|\
index 3bdb20c0ea8c2128f9090d4ecc399cb3d6d843d6..b97586e0948eb00278273ef85a654bc59b7372ef 100644 (file)
@@ -225,6 +225,24 @@ define Device/acer_vero-w6m
 endef
 TARGET_DEVICES += acer_vero-w6m
 
+define Device/asiarf_ap7986-003
+  DEVICE_VENDOR := AsiaRF
+  DEVICE_MODEL := AP7986 003
+  DEVICE_DTS := mt7986a-asiarf-ap7986-003
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 65536k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+endef
+TARGET_DEVICES += asiarf_ap7986-003
+
 define Device/adtran_smartrg
   DEVICE_VENDOR := Adtran
   DEVICE_DTS_DIR := ../dts