From: Joy Chakraborty Date: Fri, 12 May 2023 10:47:44 +0000 (+0000) Subject: spi: dw: Add DMA address widths capability check X-Git-Tag: v6.5-rc1~170^2~42 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=020a3947e7f18e790cc72785281755f8c49e11d4;p=thirdparty%2Fkernel%2Flinux.git spi: dw: Add DMA address widths capability check Store address width capabilities of DMA controller during init and check the same per transfer to make sure the bits/word requirement can be met. Current DW DMA driver requires both tx and rx channel to be configured and functional hence a subset of both tx and rx channel address width capability is checked with the width requirement(n_bytes) for a transfer. * tested on Baikal-T1 based system with DW SPI-looped back interface transferring a chunk of data with DFS:8,12,16. Signed-off-by: Joy Chakraborty dma_sg_burst = 0; + /* + * Assuming both channels belong to the same DMA controller hence the + * peripheral side address width capabilities most likely would be + * the same. + */ + dws->dma_addr_widths = tx.dst_addr_widths & rx.src_addr_widths; + return 0; } @@ -239,8 +246,14 @@ static bool dw_spi_can_dma(struct spi_controller *master, struct spi_device *spi, struct spi_transfer *xfer) { struct dw_spi *dws = spi_controller_get_devdata(master); + enum dma_slave_buswidth dma_bus_width; + + if (xfer->len <= dws->fifo_len) + return false; + + dma_bus_width = dw_spi_dma_convert_width(dws->n_bytes); - return xfer->len > dws->fifo_len; + return dws->dma_addr_widths & BIT(dma_bus_width); } static int dw_spi_dma_wait(struct dw_spi *dws, unsigned int len, u32 speed) diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 9e8eb2b52d5c7..3962e6dcf8800 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -190,6 +190,7 @@ struct dw_spi { struct dma_chan *rxchan; u32 rxburst; u32 dma_sg_burst; + u32 dma_addr_widths; unsigned long dma_chan_busy; dma_addr_t dma_addr; /* phy address of the Data register */ const struct dw_spi_dma_ops *dma_ops;