From: Manivannan Sadhasivam Date: Mon, 18 Mar 2024 06:04:27 +0000 (+0530) Subject: PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers X-Git-Tag: v6.11-rc1~97^2~7^2~11 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=0551abf2192dc944337516033678488cb08caa37;p=thirdparty%2Fkernel%2Flinux.git PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers Instead of maintaining a separate capability for glue drivers that cannot support auto detection of the eDMA mapping format, pass the mapping format directly from them. This will simplify the code and also allow adding HDMA support that also doesn't support auto detection of mapping format. Suggested-by: Serge Semin Link: https://lore.kernel.org/linux-pci/20240318-dw-hdma-v5-3-f04c5cdde760@linaro.org Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Reviewed-by: Serge Semin Reviewed-by: Siddharth Vadapalli Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda --- diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index d17549f67e72e..bf57a2f713da1 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -894,18 +894,20 @@ static int dw_pcie_edma_find_mf(struct dw_pcie *pci) { u32 val; + /* + * Bail out finding the mapping format if it is already set by the glue + * driver. Also ensure that the edma.reg_base is pointing to a valid + * memory region. + */ + if (pci->edma.mf != EDMA_MF_EDMA_LEGACY) + return pci->edma.reg_base ? 0 : -ENODEV; + /* * Indirect eDMA CSRs access has been completely removed since v5.40a * thus no space is now reserved for the eDMA channels viewport and * former DMA CTRL register is no longer fixed to FFs. - * - * Note that Renesas R-Car S4-8's PCIe controllers for unknown reason - * have zeros in the eDMA CTRL register even though the HW-manual - * explicitly states there must FFs if the unrolled mapping is enabled. - * For such cases the low-level drivers are supposed to manually - * activate the unrolled mapping to bypass the auto-detection procedure. */ - if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL)) + if (dw_pcie_ver_is_ge(pci, 540A)) val = 0xFFFFFFFF; else val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL); diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index f8e5431a207bd..313cd9808403b 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -51,9 +51,8 @@ /* DWC PCIe controller capabilities */ #define DW_PCIE_CAP_REQ_RES 0 -#define DW_PCIE_CAP_EDMA_UNROLL 1 -#define DW_PCIE_CAP_IATU_UNROLL 2 -#define DW_PCIE_CAP_CDM_CHECK 3 +#define DW_PCIE_CAP_IATU_UNROLL 1 +#define DW_PCIE_CAP_CDM_CHECK 2 #define dw_pcie_cap_is(_pci, _cap) \ test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps) diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c index cfeccc2f9ee1d..d99e12f3e4fff 100644 --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c @@ -255,7 +255,7 @@ static struct rcar_gen4_pcie *rcar_gen4_pcie_alloc(struct platform_device *pdev) rcar->dw.ops = &dw_pcie_ops; rcar->dw.dev = dev; rcar->pdev = pdev; - dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL); + rcar->dw.edma.mf = EDMA_MF_EDMA_UNROLL; dw_pcie_cap_set(&rcar->dw, REQ_RES); platform_set_drvdata(pdev, rcar);