From: Andre Przywara Date: Fri, 25 Oct 2024 10:56:20 +0000 (+0100) Subject: clk: sunxi-ng: h616: Reparent CPU clock during frequency changes X-Git-Tag: v6.14-rc1~150^2~2^4 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=087b4083d3f9d202266debc6b684b0662c96f51b;p=thirdparty%2Fkernel%2Flinux.git clk: sunxi-ng: h616: Reparent CPU clock during frequency changes The H616 user manual recommends to re-parent the CPU clock during frequency changes of the PLL, and recommends PLL_PERI0(1X), which runs at 600 MHz. Also it asks to disable and then re-enable the PLL lock bit, after the factor changes have been applied. Add clock notifiers for the PLL and the CPU mux clock, using the existing notifier callbacks, and tell them to use mux 4 (the PLL_PERI0(1X) source), and bit 29 (the LOCK_ENABLE) bit. The existing code already follows the correct algorithms. Signed-off-by: Andre Przywara Link: https://lore.kernel.org/r/20241025105620.1891596-1-andre.przywara@arm.com Tested-by: Evgeny Boger Reviewed-by: Chen-Yu Tsai Signed-off-by: Stephen Boyd --- diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c index b001d0c03534f..6469098d6a2bf 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c @@ -1107,11 +1107,24 @@ static const u32 usb2_clk_regs[] = { SUN50I_H616_USB3_CLK_REG, }; +static struct ccu_mux_nb sun50i_h616_cpu_nb = { + .common = &cpux_clk.common, + .cm = &cpux_clk.mux, + .delay_us = 1, /* manual doesn't really say */ + .bypass_index = 4, /* PLL_PERI0@600MHz, as recommended by manual */ +}; + +static struct ccu_pll_nb sun50i_h616_pll_cpu_nb = { + .common = &pll_cpux_clk.common, + .enable = BIT(29), /* LOCK_ENABLE */ + .lock = BIT(28), +}; + static int sun50i_h616_ccu_probe(struct platform_device *pdev) { void __iomem *reg; u32 val; - int i; + int ret, i; reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(reg)) @@ -1166,7 +1179,18 @@ static int sun50i_h616_ccu_probe(struct platform_device *pdev) val |= BIT(24); writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG); - return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h616_ccu_desc); + ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h616_ccu_desc); + if (ret) + return ret; + + /* Reparent CPU during CPU PLL rate changes */ + ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, + &sun50i_h616_cpu_nb); + + /* Re-lock the CPU PLL after any rate changes */ + ccu_pll_notifier_register(&sun50i_h616_pll_cpu_nb); + + return 0; } static const struct of_device_id sun50i_h616_ccu_ids[] = {