From: Aaron Kling <webgeek1234@gmail.com>
Date: Tue, 13 May 2025 21:10:54 +0000 (-0500)
Subject: arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=0936fa80150ef9121c6a4340fa2369bc9f16a520;p=thirdparty%2Fkernel%2Fstable.git

arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX

The P3509 carrier board does not connect the ID GPIO. Prior to this, the
GPIO role switch driver could not detect the mode of the OTG port.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 5f3f572ecea9..d9aafe053112 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -671,7 +671,6 @@
 					vbus-gpios = <&gpio
 						      TEGRA186_MAIN_GPIO(L, 4)
 						      GPIO_ACTIVE_LOW>;
-					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
 				};
 			};