From: Souradeep Chowdhury Date: Wed, 6 Apr 2022 09:33:47 +0000 (+0530) Subject: arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector X-Git-Tag: v5.19-rc1~46^2~124 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=0b059979090d72b3e8eca1cb18daa8da70400211;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector Add the Embedded USB Debugger(EUD) device tree node. The node contains EUD base register region and EUD mode manager register regions along with the interrupt entry. Also add the typec connector node for EUD which is attached to EUD node via port. EUD is also attached to DWC3 node via port. Also add the role-switch property to dwc3 node. Signed-off-by: Souradeep Chowdhury Link: https://lore.kernel.org/r/17a6127d1f0e4e3bac023dacf60a9ba93c1e21d1.1649235218.git.quic_schowdhu@quicinc.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index f0b64be63c21d..c07765df93033 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2822,6 +2822,12 @@ phys = <&usb_2_hsphy>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; + usb-role-switch; + port { + usb2_role_switch: endpoint { + remote-endpoint = <&eud_ep>; + }; + }; }; }; @@ -2863,6 +2869,36 @@ interrupts = ; }; + eud: eud@88e0000 { + compatible = "qcom,sc7280-eud","qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; + interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { + port@0 { + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + port@1 { + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; + + eud_typec: connector { + compatible = "usb-c-connector"; + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc";