From: Durai Manickam KR <durai.manickamkr@microchip.com>
Date: Tue, 21 Sep 2021 06:43:44 +0000 (+0530)
Subject: ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support
X-Git-Tag: v5.16-rc1~125^2~40^2~1
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=0d83e4c43a50caf92b07f7daff4d2dc653c8e7ec;p=thirdparty%2Flinux.git

ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support

SDA and SCL is configured as GPIO for I2C bus to recover during
I2C bus malfunction.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210921064344.889304-1-durai.manickamkr@microchip.com
---

diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index e06b58724ca83..806eb1d911d7c 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -307,8 +307,11 @@
 };
 
 &i2c0 { /* mikrobus i2c */
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	i2c-digital-filter;
 	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
@@ -316,8 +319,11 @@
 
 &i2c1 {
 	dmas = <0>, <0>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	i2c-digital-filter;
 	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
@@ -402,6 +408,12 @@
 		bias-disable;
 	};
 
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
 	pinctrl_key_gpio_default: key_gpio_default {
 		pinmux = <PIN_PD0__GPIO>;
 		bias-pull-up;
@@ -463,6 +475,12 @@
 		bias-disable;
 	};
 
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
 	pinctrl_mikrobus1_an: mikrobus1_an {
 		pinmux = <PIN_PD26__GPIO>;
 		bias-disable;