From: Phil Elwell Date: Sun, 23 Feb 2025 12:56:13 +0000 (+0100) Subject: ARM: dts: bcm2711: PL011 UARTs are actually r1p5 X-Git-Tag: v6.14~25^2~14^2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=0de09025f161f67c07978c4742e221243d070d41;p=thirdparty%2Fkernel%2Flinux.git ARM: dts: bcm2711: PL011 UARTs are actually r1p5 The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they have 32-entry FIFOs. The correct periphid value for this is 0x00341011. Thanks to N Buchwitz for pointing this out. Signed-off-by: Phil Elwell Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Florian Fainelli --- diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi index 5eaec6c6a1df3..4fd0732a34d32 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi @@ -134,7 +134,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -145,7 +145,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -156,7 +156,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -167,7 +167,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -1178,6 +1178,7 @@ }; &uart0 { + arm,primecell-periphid = <0x00341011>; interrupts = ; };