From: Sean Wang Date: Sun, 2 Jun 2019 01:04:15 +0000 (+0800) Subject: dt-bindings: net: bluetooth: add clock property to UART-based device X-Git-Tag: v5.3-rc1~140^2~51^2~18 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=14e3ed84d77e78fbf386006d3e5a0c20150681f5;p=thirdparty%2Fkernel%2Flinux.git dt-bindings: net: bluetooth: add clock property to UART-based device Some board requires explicitily control external osscilator via GPIO. So, add a clock property for an external oscillator for the device. Signed-off-by: Sean Wang Signed-off-by: Marcel Holtmann --- diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 14f23b354a6d1..112011c51d5e3 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -73,6 +73,10 @@ Optional properties: - reset-gpios: GPIO used to reset the device whose initial state keeps low, if the GPIO is missing, then board-level design should be guaranteed. +- clocks: Should be the clock specifiers corresponding to the entry in + clock-names property. If the clock is missing, then board-level + design should be guaranteed. +- clock-names: Should contain "osc" entry for the external oscillator. - current-speed: Current baud rate of the device whose defaults to 921600 Example: