From: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Date: Thu, 30 Oct 2025 12:49:13 +0000 (+0100)
Subject: arm64: dts: imx95-tqma9596sa: move USDHC2 config to SOM
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=16471a32346f1b9dd0f14c036411220d91b75a60;p=thirdparty%2Flinux.git

arm64: dts: imx95-tqma9596sa: move USDHC2 config to SOM

The muxing and other features are mostly determined by SOM,
so add it at this level.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
index 43ed55e57d2a3..02bbaaf298930 100644
--- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
@@ -301,17 +301,7 @@
 
 /* X16 */
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_sdvmmc>;
-	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
 	no-mmc;
 	no-sdio;
-	disable-wp;
-	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
index 8da9e368c1f4d..166439e251c53 100644
--- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -453,6 +453,18 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_sdvmmc>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	bus-width = <4>;
+};
+
 &wdog3 {
 	status = "okay";
 };