From: Mehdi Djait <mehdi.djait@linux.intel.com>
Date: Thu, 26 Jun 2025 13:34:32 +0000 (+0200)
Subject: media: i2c: ov9650: Use the v4l2 helper for obtaining the clock
X-Git-Tag: v6.18-rc1~133^2~320
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=1808dd608f856b4cae1dd42c4bdc83fdef215b47;p=thirdparty%2Fkernel%2Flinux.git

media: i2c: ov9650: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
---

diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c
index 026ea34d62914..c94e8fe29f226 100644
--- a/drivers/media/i2c/ov9650.c
+++ b/drivers/media/i2c/ov9650.c
@@ -1494,9 +1494,10 @@ static int ov965x_probe(struct i2c_client *client)
 	}
 
 	if (dev_fwnode(&client->dev)) {
-		ov965x->clk = devm_clk_get(&client->dev, NULL);
+		ov965x->clk = devm_v4l2_sensor_clk_get(&client->dev, NULL);
 		if (IS_ERR(ov965x->clk))
-			return PTR_ERR(ov965x->clk);
+			return dev_err_probe(&client->dev, PTR_ERR(ov965x->clk),
+					     "failed to get the clock\n");
 		ov965x->mclk_frequency = clk_get_rate(ov965x->clk);
 
 		ret = ov965x_configure_gpios(ov965x);