From: Lino Sanfilippo Date: Wed, 3 Jan 2024 06:18:13 +0000 (+0100) Subject: serial: core: set missing supported flag for RX during TX GPIO X-Git-Tag: v6.8-rc1~59^2~21 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=1a33e33ca0e80d485458410f149265cdc0178cfa;p=thirdparty%2Flinux.git serial: core: set missing supported flag for RX during TX GPIO If the RS485 feature RX-during-TX is supported by means of a GPIO set the according supported flag. Otherwise setting this feature from userspace may not be possible, since in uart_sanitize_serial_rs485() the passed RS485 configuration is matched against the supported features and unsupported settings are thereby removed and thus take no effect. Cc: Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO") Reviewed-by: Ilpo Järvinen Signed-off-by: Lino Sanfilippo Link: https://lore.kernel.org/r/20240103061818.564-3-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 8d381c283ceca..850f24cc53e55 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3649,6 +3649,8 @@ int uart_get_rs485_mode(struct uart_port *port) if (IS_ERR(desc)) return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n"); port->rs485_rx_during_tx_gpio = desc; + if (port->rs485_rx_during_tx_gpio) + port->rs485_supported.flags |= SER_RS485_RX_DURING_TX; return 0; }