From: Heiko Stuebner Date: Wed, 12 Nov 2025 21:42:04 +0000 (+0100) Subject: arm64: dts: rockchip: move common qnap tsx33 parts to dtsi X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=35202606ea08b9ec2b1386ac937a729e25d5beb0;p=thirdparty%2Fkernel%2Fstable.git arm64: dts: rockchip: move common qnap tsx33 parts to dtsi The NAS series based around the rk3568 contains a number of models with 1-4 drives, that reuse most of the board structure. Therefore move the shared parts to a dtsi, to be included by the devices. As the smallest device is the 1-bay TS133, keep everything > slot1 in the individual devicetree. Signed-off-by: Heiko Stuebner Link: https://patch.msgid.link/20251112214206.423244-4-heiko@sntech.de --- diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 224db87973b2..d1e3b7e7a280 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -6,10 +6,7 @@ /dts-v1/; -#include -#include -#include -#include "rk3568.dtsi" +#include "rk3568-qnap-tsx33.dtsi" / { model = "Qnap TS-433-4G NAS System 4-Bay"; @@ -17,83 +14,6 @@ aliases { ethernet0 = &gmac0; - mmc0 = &sdhci; - rtc0 = &rtc_rv8263; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <©_button_pin>, <&reset_button_pin>; - pinctrl-names = "default"; - - key-copy { - label = "copy"; - gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - key-reset { - label = "reset"; - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = ; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; - label = "hdd1:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd1_led_pin>; - }; - - led-1 { - color = ; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; - label = "hdd2:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd2_led_pin>; - }; - - led-2 { - color = ; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; - label = "hdd3:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd3_led_pin>; - }; - - led-3 { - color = ; - function = LED_FUNCTION_DISK; - gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; - label = "hdd4:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd4_led_pin>; - }; - }; - - dc_12v: regulator-dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; }; vcc3v3_pcie: regulator-vcc3v3-pcie { @@ -105,74 +25,6 @@ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; vin-supply = <&dc_12v>; }; - - vcc3v3_sys: regulator-vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_host: regulator-vcc5v0-host { - compatible = "regulator-fixed"; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_otg: regulator-vcc5v0-otg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_otg_en>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb: regulator-vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; -}; - -/* connected to usb_host0_xhci */ -&combphy0 { - status = "okay"; -}; - -/* connected to sata1 */ -&combphy1 { - status = "okay"; }; /* connected to sata2 */ @@ -180,70 +32,6 @@ status = "okay"; }; -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -/* - * The MCU can provide system temperature too, but only by polling and of - * course also cannot set trip points. So attach to the cpu thermal-zone - * instead to control the fan. - */ -&cpu_thermal { - trips { - case_fan0: case-fan0 { - hysteresis = <2000>; - temperature = <35000>; - type = "active"; - }; - - case_fan1: case-fan1 { - hysteresis = <2000>; - temperature = <45000>; - type = "active"; - }; - - case_fan2: case-fan2 { - hysteresis = <2000>; - temperature = <65000>; - type = "active"; - }; - }; - - cooling-maps { - /* - * Always provide some air movement, due to small case - * full of harddrives. - */ - map1 { - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - trip = <&case_fan0>; - }; - - map2 { - cooling-device = <&fan 2 3>; - trip = <&case_fan1>; - }; - - map3 { - cooling-device = <&fan 4 THERMAL_NO_LIMIT>; - trip = <&case_fan2>; - }; - }; -}; - &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; @@ -260,263 +48,7 @@ status = "okay"; }; -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = ; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - system-power-controller; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - /* - * turning this off, breaks access to both - * PCIe controllers, refclk generator perhaps - */ - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - }; -}; - &i2c1 { - status = "okay"; - - rtc_rv8263: rtc@51 { - compatible = "microcrystal,rv8263"; - reg = <0x51>; - wakeup-source; - }; - - /* eeprom for vital-product-data on the mainboard */ - eeprom@54 { - compatible = "giantec,gt24c04a", "atmel,24c04"; - reg = <0x54>; - label = "VPD_MB"; - num-addresses = <2>; - pagesize = <16>; - read-only; - }; - /* eeprom for vital-product-data on the backplane */ eeprom@56 { compatible = "giantec,gt24c04a", "atmel,24c04"; @@ -528,6 +60,42 @@ }; }; +&leds { + led-1 { + color = ; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "hdd2:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd2_led_pin>; + }; + + led-2 { + color = ; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "hdd3:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd3_led_pin>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_DISK; + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "hdd4:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd4_led_pin>; + }; +}; + +&mcu { + compatible = "qnap,ts433-mcu"; +}; + &mdio0 { rgmii_phy0: ethernet-phy@3 { /* Motorcomm YT8521 phy */ @@ -567,21 +135,7 @@ }; }; - keys { - copy_button_pin: copy-button-pin { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - reset_button_pin: reset-button-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - leds { - hdd1_led_pin: hdd1-led-pin { - rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - hdd2_led_pin: hdd2-led-pin { rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; @@ -594,152 +148,12 @@ rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_otg_en: vcc5v0-otg-en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - vccio4-supply = <&vcc_1v8>; - vccio6-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sata1 { - status = "okay"; }; &sata2 { status = "okay"; }; -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -/* - * Connected to an MCU, that provides access to more LEDs, - * buzzer, fan control and more. - */ -&uart0 { - status = "okay"; - - mcu { - compatible = "qnap,ts433-mcu"; - - fan: fan-0 { - #cooling-cells = <2>; - cooling-levels = <0 64 89 128 166 204 221 238>; - }; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - serial-number@0 { - reg = <0x0 0x13>; - }; - - ext-port@22 { - reg = <0x22 0x2>; - }; - - mac0: mac@24 { - compatible = "mac-base"; - reg = <0x24 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac1: mac@35 { - compatible = "mac-base"; - reg = <0x35 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac2: mac@46 { - compatible = "mac-base"; - reg = <0x46 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac3: mac@57 { - compatible = "mac-base"; - reg = <0x57 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac4: mac@68 { - compatible = "mac-base"; - reg = <0x68 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac5: mac@79 { - compatible = "mac-base"; - reg = <0x79 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac6: mac@8a { - compatible = "mac-base"; - reg = <0x8a 0x11>; - #nvmem-cell-cells = <1>; - }; - - mac7: mac@9b { - compatible = "mac-base"; - reg = <0x9b 0x11>; - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -/* - * Pins available on CN3 connector at TTL voltage level (3V3). - * ,_ _. - * |1234| 1=TX 2=VCC - * `----' 3=RX 4=GND - */ -&uart2 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -/* connected to usb_host0_xhci */ -&usb2phy0_otg { - phy-supply = <&vcc5v0_otg>; - status = "okay"; -}; - &usb2phy1 { status = "okay"; }; @@ -765,12 +179,6 @@ status = "okay"; }; -/* front port */ -&usb_host0_xhci { - dr_mode = "host"; - status = "okay"; -}; - /* left port backside */ &usb_host1_ehci { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi new file mode 100644 index 000000000000..f009275c72c8 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi @@ -0,0 +1,608 @@ +#include +#include +#include +#include "rk3568.dtsi" + +/ { + aliases { + mmc0 = &sdhci; + rtc0 = &rtc_rv8263; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <©_button_pin>, <&reset_button_pin>; + pinctrl-names = "default"; + + key-copy { + label = "copy"; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-reset { + label = "reset"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + label = "hdd1:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd1_led_pin>; + }; + }; + + dc_12v: regulator-dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_otg: regulator-vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_otg_en>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +/* connected to usb_host0_xhci */ +&combphy0 { + status = "okay"; +}; + +/* connected to sata1 */ +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +/* + * The MCU can provide system temperature too, but only by polling and of + * course also cannot set trip points. So attach to the cpu thermal-zone + * instead to control the fan. + */ +&cpu_thermal { + trips { + case_fan0: case-fan0 { + hysteresis = <2000>; + temperature = <35000>; + type = "active"; + }; + + case_fan1: case-fan1 { + hysteresis = <2000>; + temperature = <45000>; + type = "active"; + }; + + case_fan2: case-fan2 { + hysteresis = <2000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + /* + * Always provide some air movement, due to small case + * full of harddrives. + */ + map1 { + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + trip = <&case_fan0>; + }; + + map2 { + cooling-device = <&fan 2 3>; + trip = <&case_fan1>; + }; + + map3 { + cooling-device = <&fan 4 THERMAL_NO_LIMIT>; + trip = <&case_fan2>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + /* + * turning this off, breaks access to both + * PCIe controllers, refclk generator perhaps + */ + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&i2c1 { + status = "okay"; + + rtc_rv8263: rtc@51 { + compatible = "microcrystal,rv8263"; + reg = <0x51>; + wakeup-source; + }; + + /* eeprom for vital-product-data on the mainboard */ + eeprom@54 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x54>; + label = "VPD_MB"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; +}; + +&pinctrl { + keys { + copy_button_pin: copy-button-pin { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + hdd1_led_pin: hdd1-led-pin { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + vccio4-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +/* + * Connected to an MCU, that provides access to more LEDs, + * buzzer, fan control and more. + */ +&uart0 { + status = "okay"; + + mcu: mcu { + fan: fan-0 { + #cooling-cells = <2>; + cooling-levels = <0 64 89 128 166 204 221 238>; + }; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + serial-number@0 { + reg = <0x0 0x13>; + }; + + ext-port@22 { + reg = <0x22 0x2>; + }; + + mac0: mac@24 { + compatible = "mac-base"; + reg = <0x24 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac1: mac@35 { + compatible = "mac-base"; + reg = <0x35 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac2: mac@46 { + compatible = "mac-base"; + reg = <0x46 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac3: mac@57 { + compatible = "mac-base"; + reg = <0x57 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac4: mac@68 { + compatible = "mac-base"; + reg = <0x68 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac5: mac@79 { + compatible = "mac-base"; + reg = <0x79 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac6: mac@8a { + compatible = "mac-base"; + reg = <0x8a 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac7: mac@9b { + compatible = "mac-base"; + reg = <0x9b 0x11>; + #nvmem-cell-cells = <1>; + }; + }; + }; +}; + +/* + * Pins available on CN3 connector at TTL voltage level (3V3). + * ,_ _. + * |1234| 1=TX 2=VCC + * `----' 3=RX 4=GND + */ +&uart2 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +/* connected to usb_host0_xhci */ +&usb2phy0_otg { + phy-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +/* front port */ +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +};