From: Caleb James DeLisle Date: Wed, 7 May 2025 13:44:57 +0000 (+0000) Subject: mips: Add EcoNet MIPS platform support X-Git-Tag: v6.16-rc1~34^2~7 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=35fb26f94dfa1b291086b84b2421f957214824d1;p=thirdparty%2Fkernel%2Flinux.git mips: Add EcoNet MIPS platform support Add platform support for EcoNet MIPS SoCs. Signed-off-by: Caleb James DeLisle Signed-off-by: Thomas Bogendoerfer --- diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index bca37ddf974b..41a00fa860c1 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -11,6 +11,7 @@ platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/ platform-$(CONFIG_EYEQ) += mobileye/ platform-$(CONFIG_MIPS_COBALT) += cobalt/ platform-$(CONFIG_MACH_DECSTATION) += dec/ +platform-$(CONFIG_ECONET) += econet/ platform-$(CONFIG_MIPS_GENERIC) += generic/ platform-$(CONFIG_MACH_JAZZ) += jazz/ platform-$(CONFIG_LANTIQ) += lantiq/ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e0e6ce2592b4..c3dbdc808664 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -391,6 +391,30 @@ config MACH_DECSTATION otherwise choose R3000. +config ECONET + bool "EcoNet MIPS family" + select BOOT_RAW + select CPU_BIG_ENDIAN + select DEBUG_ZBOOT + select EARLY_PRINTK_8250 + select ECONET_EN751221_TIMER + select SERIAL_OF_PLATFORM + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT_UART16550 + select USE_GENERIC_EARLY_PRINTK_8250 + select USE_OF + help + EcoNet EN75xx MIPS devices are big endian MIPS machines used + in XPON (fiber) and DSL applications. They have SPI, PCI, USB, + GPIO, and Ethernet, with optional XPON, DSL, and VoIP DSP cores. + Don't confuse these with the Airoha ARM devices sometimes referred + to as "EcoNet", this family is for MIPS based devices only. + config MACH_JAZZ bool "Jazz family of machines" select ARC_MEMORY @@ -1021,6 +1045,7 @@ source "arch/mips/ath79/Kconfig" source "arch/mips/bcm47xx/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/bmips/Kconfig" +source "arch/mips/econet/Kconfig" source "arch/mips/generic/Kconfig" source "arch/mips/ingenic/Kconfig" source "arch/mips/jazz/Kconfig" diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c index db618e72a0c4..529e77a6487c 100644 --- a/arch/mips/boot/compressed/uart-16550.c +++ b/arch/mips/boot/compressed/uart-16550.c @@ -20,6 +20,11 @@ #define PORT(offset) (CKSEG1ADDR(INGENIC_UART_BASE_ADDR) + (4 * offset)) #endif +#ifdef CONFIG_ECONET +#define EN75_UART_BASE 0x1fbf0003 +#define PORT(offset) (CKSEG1ADDR(EN75_UART_BASE) + (4 * (offset))) +#endif + #ifndef IOTYPE #define IOTYPE char #endif diff --git a/arch/mips/econet/Kconfig b/arch/mips/econet/Kconfig new file mode 100644 index 000000000000..d03f90f3daa4 --- /dev/null +++ b/arch/mips/econet/Kconfig @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +if ECONET + +choice + prompt "EcoNet SoC selection" + default SOC_ECONET_EN751221 + help + Select EcoNet MIPS SoC type. Individual SoCs within a family are + very similar, so is it enough to select the right family, and + then customize to the specific SoC using the device tree only. + + config SOC_ECONET_EN751221 + bool "EN751221 family" + select COMMON_CLK + select ECONET_EN751221_INTC + select IRQ_MIPS_CPU + select SMP + select SMP_UP + select SYS_SUPPORTS_SMP + help + The EN751221 family includes EN7512, RN7513, EN7521, EN7526. + They are based on single core MIPS 34Kc processors. To boot + this kernel, you will need a device tree such as + MIPS_RAW_APPENDED_DTB=y, and a root filesystem. +endchoice + +choice + prompt "Devicetree selection" + default DTB_ECONET_NONE + help + Select the devicetree. + + config DTB_ECONET_NONE + bool "None" +endchoice + +endif diff --git a/arch/mips/econet/Makefile b/arch/mips/econet/Makefile new file mode 100644 index 000000000000..7e4529e7d3d7 --- /dev/null +++ b/arch/mips/econet/Makefile @@ -0,0 +1,2 @@ + +obj-y := init.o diff --git a/arch/mips/econet/Platform b/arch/mips/econet/Platform new file mode 100644 index 000000000000..ea5616447bcd --- /dev/null +++ b/arch/mips/econet/Platform @@ -0,0 +1,5 @@ +# To address a 7.2MB kernel size limit in the EcoNet SDK bootloader, +# we put the load address well above where the bootloader loads and then use +# zboot. So please set CONFIG_ZBOOT_LOAD_ADDRESS to the address where your +# bootloader actually places the kernel. +load-$(CONFIG_ECONET) += 0xffffffff81000000 diff --git a/arch/mips/econet/init.c b/arch/mips/econet/init.c new file mode 100644 index 000000000000..6f43ffb209cb --- /dev/null +++ b/arch/mips/econet/init.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * EcoNet setup code + * + * Copyright (C) 2025 Caleb James DeLisle + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define CR_AHB_RSTCR ((void __iomem *)CKSEG1ADDR(0x1fb00040)) +#define RESET BIT(31) + +#define UART_BASE CKSEG1ADDR(0x1fbf0003) +#define UART_REG_SHIFT 2 + +static void hw_reset(char *command) +{ + iowrite32(RESET, CR_AHB_RSTCR); +} + +/* 1. Bring up early printk. */ +void __init prom_init(void) +{ + setup_8250_early_printk_port(UART_BASE, UART_REG_SHIFT, 0); + _machine_restart = hw_reset; +} + +/* 2. Parse the DT and find memory */ +void __init plat_mem_setup(void) +{ + void *dtb; + + set_io_port_base(KSEG1); + + dtb = get_fdt(); + if (!dtb) + panic("no dtb found"); + + __dt_setup_arch(dtb); + + early_init_dt_scan_memory(); +} + +/* 3. Overload __weak device_tree_init(), add SMP_UP ops */ +void __init device_tree_init(void) +{ + unflatten_and_copy_device_tree(); + + register_up_smp_ops(); +} + +const char *get_system_type(void) +{ + return "EcoNet-EN75xx"; +} + +/* 4. Initialize the IRQ subsystem */ +void __init arch_init_irq(void) +{ + irqchip_init(); +} + +/* 5. Timers */ +void __init plat_time_init(void) +{ + of_clk_init(NULL); + timer_probe(); +}