From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Date: Tue, 12 Aug 2025 10:48:15 +0000 (+0200)
Subject: arm64: dts: qcom: sc7180: Describe on-SoC USB-adjacent data paths
X-Git-Tag: v6.18-rc1~147^2~32^2~32
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=3d7f446472cb0d9e0dbae0aa09f3647d5649c758;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: qcom: sc7180: Describe on-SoC USB-adjacent data paths

USB connector bindings describe a ports subnode, which describes how
its High-/SuperSpeed data lines (as well as the SBU pins for Type-C)
are connected.

On Linux, skipping the graph results in the 'connect_type' sysfs
attribute returning 'unknown', instead of 'hotplug' or similar. This in
turn is parsed by some operating systems (such as CrOS), to e.g. make
security policy decisions.

Define ports {} for the DWC controller & the QMPPHY and connect them
together for the SS lanes.

Leave the DP endpoint unconnected for now, as both Aspire 1 and the
Chromebooks (unmerged, see [1]) seem to have a non-trivial topology.
Take the creative liberty to add a newline before its ports' subnodes
though.

[1] https://lore.kernel.org/linux-arm-msm/20240210070934.2549994-23-swboyd@chromium.org/

Suggested-by: Rob Herring (Arm) <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/175462129176.394940.16810637795278334342.robh@kernel.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250812-topic-7180_qmpphy_ports-v2-1-7dc87e9a1f73@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8f827f1d8515d..a0df10a97c7f8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2897,6 +2897,31 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint { };
+				};
+			};
 		};
 
 		pmu@90b6300 {
@@ -3070,6 +3095,26 @@
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -3384,8 +3429,10 @@
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
+
 					port@0 {
 						reg = <0>;
+
 						dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
@@ -3393,6 +3440,7 @@
 
 					port@1 {
 						reg = <1>;
+
 						mdss_dp_out: endpoint { };
 					};
 				};