From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 10 Feb 2025 09:31:17 +0000 (+0100)
Subject: ARM: dts: ixp4xx: Add Netgear WG302 v1 GPIOs
X-Git-Tag: v6.15-rc1~159^2~37^2
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=3dceb794c09d5f2c474628de45f146b59a8d985d;p=thirdparty%2Fkernel%2Flinux.git

ARM: dts: ixp4xx: Add Netgear WG302 v1 GPIOs

This adds GPIO LED indicators, the reset GPIO RESET
button on the Netgear WG302 v1 to the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250210-ixp4xx-dts-v1-3-6b752d745e04@linaro.org
---

diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
index af7b6a976d3dd..a351a97d257ea 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -8,6 +8,7 @@
 
 #include "intel-ixp42x.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Netgear WG302 v1";
@@ -32,6 +33,35 @@
 		serial0 = &uart1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		test_led: led-test {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "test";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wlan_led: led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	gpio_keys {
+		/* RESET is on GPIO13 which can't fire interrupts */
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-reset {
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	soc {
 		bus@c4000000 {
 			flash@0,0 {