From: Sudeep Holla <sudeep.holla@arm.com>
Date: Fri, 11 Feb 2022 11:02:04 +0000 (+0000)
Subject: arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required
X-Git-Tag: v5.17-rc7~27^2~2^2~1
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=45d941f67b000b6d79159522a0bbfc37cfd584d6;p=thirdparty%2Flinux.git

arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required

The SCMI binding clearly states the value of #thermal-sensor-cells must
be 1. However arch/arm64/boot/dts/freescale/imx8ulp.dtsi sets it 0 which
results in the following warning with dtbs_check:

  |  arch/arm64/boot/dts/freescale/imx8ulp-evk.dt.yaml: scmi:
  | 		protocol@15:#thermal-sensor-cells:0:0: 1 was expected
  |	From schema: Documentation/devicetree/bindings/firmware/arm,scmi.yaml

Fix it by setting it to 1 as required.

Cc:Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Fixes: a38771d7a49b ("arm64: dts: imx8ulp: add scmi firmware node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index a987ff7156bd6..09f7364dd1d05 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -132,7 +132,7 @@
 
 			scmi_sensor: protocol@15 {
 				reg = <0x15>;
-				#thermal-sensor-cells = <0>;
+				#thermal-sensor-cells = <1>;
 			};
 		};
 	};